ManageMidCallflowTriggering

Description (v1.0)

INFO This application enables the dynamic feature option for this channel
INFO It allows to trigger a callflow during a call on one or the two channels.
INFO This is which channel is allowed to activate this feature.
INFO This is the channel of the call that the application will be executed on.
INFO This is the context to use.
INFO This is the extension or the callflow to branch on.

Release notes

Version 1.0 - General deployment
  • Improvement: Initial version
  • Dependency:
    • Communication Server module version 2.3.0 or higher

Action parameters

  • Activated by: This is which channel is allowed to activate this feature. The "caller" is the channel that executed the Dial application, while the "callee" is the channel called by the Dial application. "Both" means that both channels are allowed to activate this feature.
  • Activated on: This is the channel of the call that the application will be executed on. "self" means run the application on the same channel that activated the feature. "peer" means run the application on the opposite channel from the one that has activated the feature.
  • Context: The context to use. If the context is not specified the call will be sent to the default context.
  • Extension: The extension or the callflow to branch on.

ALERT! Important note:
  • If your callflow executes this action, the RE-INVITE on the call will automatically be disabled in order for the Communication Server to be able to capture the DTMF.
  • While the configured channel is redirected to the other extension or callflow, the other channel is muted, so the user won't hear anything during that time.

Copyright © Escaux SA