UPS Support

Release notes

Version 1.1.0 - Early deployment
  • Improvement: Remove dependency on safetynet (M19656)
  • Dependency:
    • Baseline >= 2.0.0
    • Baseline < 3.0.0

Version 1.0.1 - Early deployment
  • Improvement: Add support for RFC 1628 compliant UPS (M5895)

Version 1.0.0 - Early deployment
  • Feature: initial release

Module configuration interface

create_resource_form: .:/usr/share/escaux/glue/lib:/usr/share/escaux/glue/bin/gen_wiki_documentation/src/lib:/usr/share/escaux/glue/bin/gen_wiki_documentation/src/lib/

SNMP UPS Type (MIB)
SNMP UPS IP Address
SNMPv1 Community Read-Only

Module configuration parameters

  • SNMP UPS Type (MIB) Choose the MIB to use.
    • ietf: UPS that is RFC 1628 compliant. Newer MGE, Eaton and some others (default)
    • mge: MGE UPS Systems and MGE Office Protection Systems devices with SNMP cards

  • SNMP UPS IP Address: IP address of the SNMP management card of the UPS.

  • SNMPv1 Community Read-Only: Password for read-only access to SNMP data.
Copyright © Escaux SA