Cisco ATA Support

Description

This modules provides the necessary firmware and configuration files for the support of Cisco (formerly Linksys, Sipura) ATA devices and related devices.

Release notes

Show release notes
Version 2.6.0 - Early deployment
  • Feature: Support of Cisco SPA 8000 with extra parameters (PC-3745)
  • Dependency:
    • Software Sources module >= 1.2.2
    • SOP Base >= 2.4.1

Version 2.5.1 - Early deployment
  • Bugfix: Make IP of sop1/2 available in parameters for sync_code (TS-4857)
  • Dependency:
    • Software Sources module >= 1.2.2
    • SOP Base >= 2.4.1

Version 2.5.0 - Early deployment
  • Improvement: Move fusion registration to ansible role. (PC-2924)
  • Dependency:
    • Software Sources module >= 1.2.2
    • SOP Base >= 2.4.1

Version 2.4.0 - Early deployment
  • Feature: new driver SDSA for ATA 191 allowing reconfigure from FMA (PC-2820)
  • Dependency:
    • Software Sources module >= 1.2.2
    • SOP Base >= 2.4.1

Version 2.3.0 - Early deployment
  • Feature: Upgraded firmware of ATA191 to 11.1SR4 (PC-1701)
  • Improvement: Optimized package size (PC-1701)
  • Bugfix: ATA 191 failed to provision (PC-1701)
  • Bugfix: Support provisioning from internet (PC-1769)
  • Dependency:
    • Software Sources module >= 1.2.2

Version 2.2.1 - Early deployment
  • Feature: Added support for Cisco ATA 191 (PC-482)
  • Bugfix: Old version of package escaux-sipura was installed
  • Dependency:
    • Software Sources module >= 1.2.2

Version 2.2.0 - Deprecated
  • Feature: Added support for Cisco ATA 191 (PC-482)
  • Deprecated: Main feature not working
  • Dependency:
    • Software Sources module >= 1.2.2

Version 2.1.0 - Early deployment
  • Improvement: Firmware upgrade support (PC-60)
  • Improvement: Custom CA support (M23764)
  • Dependency:
    • Software Sources module >= 1.2.2

Version 2.0.1 - Early deployment
  • Bugfix: Creating a service shouldn't try to set APL domain (M23881)
  • Dependency:
    • Software Sources module >= 1.2.2

Version 2.0.0 - Early deployment
  • Feature: Support central provisioning (M21451)
  • Feature: Support HTTP provisioning (M16267)
  • Improvement: Converted to APT
  • Dependency:
    • Software Sources module >= 1.2.2

Version 1.5.4 - Early deployment
  • Bugfix: Update firmware version for SPA112 to 1.4.1 (M15031)

Version 1.5.3 - General deployment
  • Bugfix: include firmware 6.1.12 for SPA8000 to fix occasional fax transmission failures when T.38 is enabled (M6746)

Version 1.5.2 - General deployment
  • Bugfix: Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. Firmware binary for SPA2102 was missing.

Version 1.5.1 - General deployment
  • Bugfix: Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. Added firmware 5.2.13 for SPA2102 for proper T.38 support.

Version 1.5.0 - General deployment
  • Feature: Support for Cisco SPA112.

Version 1.4.2 - General deployment
  • Feature: Support for new firmware 6.1.5(a) for Linksys SPA942
  • Feature: Support for languages for Linksys SPA942 (M0004081)

Version 1.4.1 - General deployment
  • Feature: Support for Linksys SPA942 (M0004060)

Version 1.4.0 - General deployment
  • Feature: Remove old tftp configuration file when resource is removed from SMP (M0001576)

Version 1.3.0 - General deployment
  • Added SPA2002 firmware which is no longer in TFTP module 2.0 or higher

Version 1.2.0 - General deployment
  • autoupgrade firmware of sipura 3102
  • Install needed configuration files for 2102 and 3102
  • Install needed configuration files for SPA8000
  • Install firmware 6.1.3 for the SPA8000

Version 1.1.0 - General deployment
  • autoupgrade firmware of sipura 3102
  • Install needed configuration files for 2102 and 3102
  • Install needed configuration files for SPA8000

Version 1.0.0 - General deployment
  • autoupgrade firmware of sipura 3102
  • Install needed configuration files for 2102 and 3102

Module configuration interface

create_resource_form: .:/usr/share/escaux/glue/lib:/usr/share/escaux/glue/bin/gen_wiki_documentation/src/lib:/usr/share/escaux/glue/bin/gen_wiki_documentation/src/lib/

Application Locator host[:port]

Module configuration parameters

  • Provisioning method: Select the provisioning method to be used, either HTTP to enable provisioning through HTTP or TFTP (the default) to only allow TFTP provisioning.
  • Provisioning domain: The domain that will be used by the SPA to access its configuration without http://. eg; If it will directly access to the sop, please use [ipaddressofsop]/sipura/provisioning, If the access will be done through a proxy, then use the proxy address [proxydomain>] (potentially with the folder, depending on how you have configured your proxy.)
  • Enable Digest: The default is No.
    • Yes: To force digest authentication.
    • Yes: To disable authentication
  • Digest username: The username to be used when Digest authentication is enabled.
  • Digest password: The password to be used when digest authentication is enabled

Post-installation

It might be needed to reset the ATA box to factory defaults in order to let it get the new firmware.

See the user guides:

Copyright © Escaux SA