Mitel5330 (SDM3)

Description

This resource allows to connect a Mitel 5330 IP Phone.

Release notes

Version 1.1 - General deployment
  • added support for voicemail button
  • added support for programmable buttons
  • added phone book
  • Dependency:
    • Mitel Phone Support module > 1.0

Version 1.0 - Deprecated
  • Deprecated: Significant improvements have been done in a higher version
  • Dependency:
    • Mitel Phone Support module > 1.0

Resource configuration interface

GUI unavailable.

  • SIP server feature: Note: These technical settings if improperly configured can have impact on the availability of the phone
    • SIP re-invite: allow the voice media to be transfered directly between SIP endpoints through the SIP re-invite procedure. Possible value are:
      • Default: Keep default settings as defined in the Telephony server module (for example Asterisk 1.2.x)
      • Yes: Allow the server to perform the re-invite procedure.
      • No: Do not allow the server to perform the re-invite procedure.
    • Qualify SIP devices registration: In order to monitor the availability of the phone, the SIP server can send SIP OPTIONS message to monitor the SIP stack availability. This parameter configures the frequency of this SIP OPTION message. Possible value are:
      • Default: Keep default settings as defined in the Telephony server module (for example Asterisk 1.2.x)
      • Yes: Put a default value of 2000ms
      • Another value in ms.
    • Force specific codec: If this parameter is set to 'Yes', the SIP server will only accept the 3 codecs defined in this resource with the specified preference.
    • First Codec, Second Codec, Third Codec: Ordered list of preferred codecs.
  • Advanced Options:
    • Timezone: Timezone where the phone is located
    • Automatic Off-hook Call Placement: If set to enabled, the phone will automatically dial the Contact to call when the handset is off hook.
  • Network Settings: ERROR! Important note : The following network parameters can break the connection between the phone and the SOP. If incorrect values are set, a factory reset of the phone might become necessary.
    • Type of service : Diffserv classification for the phone outbound voice traffic: Currently not supported due to a limitation on the phone. The DSCP value will always be 0x2e - Expedited Forwarding.
    • 802.1p priority: IEEE 802.1p voice VLAN priority
    • Voice VLAN id (1 -> 4094) : IEEE 802.1q voice VLAN identifier
    • RTP Port start & RTP Port stop : The port used for RTP communication may be specified. It is recommended to leave this option empty so the default values will be chosen.
Copyright © Escaux SA