DHCP Server (DPP3)
Description
This probe verifies that the DHCP server process is running. It simply checks that the process appears in the process table, no application level test is done to see if the server is actually working.
Release notes
Version 1.0 - Early deployment
- Bugfix: support dhcp module 3 (M0004872)
- Dependency:
Version 0.1 - General deployment
- Initial version
- Dependency:
Resource configuration interface
Resource parameters
This probe has no configurable parameters.
This probe does not generate any performance graphs.
Alarms
This probe can report following alarm states:
- CRITICAL: The
dhcpd
process is not running.
Possible causes
No likely root-causes are documented yet.
Possible consequences
If the DHCP server is not running and it is supposed to run on the SOP (and not by the customer), this has the following consequences:
- phones will fail to (re)boot. They will continue to function if not rebooted.
- PUM login/logout will not work as it does reboot the phone.
Possible actions
- reboot the SOP
- escalate to Escaux