PolycomVVX500 (SDPE)

Description

This resource allows to connect a Polycom VVX 500 IP Phone.

Release notes

Version 5.15.1 - Early deployment
  • Feature: Support Polycoms on Steam with SBC (MCH-706)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 5.15.0 - Early deployment
  • Feature: Source SOP configuration and FMA support (PC-837)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 5.14.0 - Early deployment
  • Feature: added support for Polycom VVX 150 (PC-539)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 5.12.0 - Early deployment
  • Feature: Added support for VVX 250 (M25185)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 5.11.0 - Early deployment
  • Feature: Support for pickup on a BLF key (M19406)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.10.1 - Early deployment
  • Bugfix: SRTP on video-enabled VVX (M22350)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.10.0 - Early deployment
  • Feature: Added support for VVXD60 dect (M23150)
  • Feature: Allow to set a fifth softkey on every VVX (M22569)
  • Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
  • Improvement: Allow to adjust screen saver settings for every VVX (M23139)
  • Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569)
  • Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
  • Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.9.1 - Early deployment
  • Bugfix: Some resource settings are not taken into account in case of PUM login (M20283)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.9.0 - Early deployment
  • Feature: Support IP650 and IP335 on internet (M20669)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.8.1 - Early deployment
  • Bugfix: Phone language selection only worked when global setting was selected (M19001)
  • Improvement: Support IP6000 over Internet (M16844)
  • Improvement: Allow to configure SIP Session timer (M19716)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.8.0 - Early deployment
  • Improvement: Code alignment (M0)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.7.1 - Early deployment
  • Bugfix: It was not possible to disable the directory softkey (M18395)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.7.0 - Early deployment
  • Feature: IP7000 on internet (M15791)
  • Feature: SIP peer-specific RTP port range (M16702)
  • Bugfix: Push feature was not working on VVX410 (M16490)
  • Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.6.0 - Early deployment
  • Feature: IP331 on internet (M16829)
  • Improvement: Normalize date and time display for VVXs (M15863)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.5.0 - Early deployment
  • Improvement: Code alignment (M0)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.4.1 - Early deployment
  • Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.4.0 - Early deployment
  • Feature: Allow custom SIP server port (M14770)
  • Feature: Allow custom NTP server (M14742)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.3.0 - Early deployment
  • Feature: added support for user's regional language (M12720)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.2.1 - Early deployment
  • Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.2.0 - Early deployment
  • Bugfix: Headset options were not taken into account by the resource. (M10735)
  • Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
  • Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
  • Improvement: Add video jitter buffer variables. (M11547)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.4 - Early deployment
  • Bugfix: Headset options were not taken into account by the resource. (M10735)
  • Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
  • Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.3 - General deployment
  • Bugfix: Corrected default password setting (M0010260)
  • Bugfix: Restored video codec selection (M10702)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.2 - Early deployment
  • Bugfix: Fix datetime format (12/24) in configuration (M8829)
  • Bugfix: SIP Reinvite was broken (fixed) (M8551)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.1 - General deployment
  • Bugfix: Support for UTF-8 characters (M9321)
  • Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764)
  • Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
  • Bugfix: Showing the extension and the first name on the phone label was not possible (M9367)
  • Limitations: The caching only works with SMP version >= 5.3.0
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.0 - General deployment
  • Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992)
  • Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822)
  • Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301)
  • Bugfix: The DND softkey is now hidden when DND is disabled (M7743)
  • Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744)
  • Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274)
  • Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
  • Limitation: BLF unavailable status is not interpreted by the phone. (M0)
  • Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
  • Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
  • Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
  • Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
  • Limitation: directory's filter may not work properly. (M0)
  • Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
  • Limitation: the resource only supports ASCII characters in the variables. (M0)
  • Dependency:
    • Polycom Phone Support module version 5.0.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.0.1 - Early deployment
  • Bugfix: polycom with mac 64:16:7F and old firmware (backport)
  • Dependency:
    • Polycom Phone Support module v4.10.0 or higher
    • System Base Module 1.2.1 or higher

Version 5.0.0 - General deployment
  • Feature: Support one expansion module (color or paper display) (M8249)
  • Feature: Speeddials and BLF can be mixed, and have absolute positions
  • Feature: Configurable voicemail service extension (M7747)
  • Improvement: BLF (supervision) uses the phones LED to show extended status
  • Improvement: Removed slow operations during apply changes (M7787)
  • Improvement: Enable video setting (M7777)
  • Bugfix: The DND softkey is fully deactivated
  • Bugfix: "Default" qualify policy do not respect global (server) settings (M7307)
  • Bugfix: The softkey configuration was misleading and not correctly applied (M7634)
  • Limitation: The DND softkey cannot be hidden
  • Limitation: Not compatible with Personal User Mobility (PUM)
  • Limitation: Not compatible with m.Connect
  • Dependency:
    • Polycom Phone Support module v4.10.0 or higher
    • System Base Module 1.2.1 or higher

Version 4.24.0 - Early deployment
  • Feature: Compatibility with both module 4.x and module 5.x (MS-226)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 4.23.1 - Early deployment
  • Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319)
  • Bugfix: Unable to update dot1x configuration when caching was activated (M12957)
  • Improvement: Allow to configure SIP Session timer (M19716)
  • Dependency:
    • Polycom Phone Support module version 4.8.1 or higher

Version 4.23.0 - General deployment
  • Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301)
  • Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287)
  • Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552)
  • Dependency:
    • Polycom Phone Support module version 4.8.1 or higher

Version 4.22.2 - General deployment
  • Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.22.1 - General deployment
  • Bugfix: Files are not generated on standalone SOPs (M7914)
  • Improvement: Removed H263+ from the codec list which is not supported by the VVX500 (M7989)
  • Improvement: Added the possibility to disable the PC LAN Port (M7989)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.22.0 - General deployment
  • Feature: Headset echo cancelation can be configured (M5788)
  • Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774)
  • Feature: Add support for h264 video codec (M6612)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.21 - Deprecated
  • Improvement: Added H261/H263/H263P/H264 video support
  • Deprecated: Configuration files are not generated on standalone SOPs (M7914)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.19.0 - General deployment
  • Feature: Added support for TLS/SRTP (M6153)
  • Feature: Added the possibility to configure the RTP packet size, ptime (M6926)
  • Feature: Enable cleaning of old phone configuration didn't work with templating (M6988)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.18 - General deployment
  • Feature: Added support for Connected Line Update (M5654)
  • Improvement: Add headset configuration in resource parameters for Polycom IP 650 (M4533)
  • Improvement: Add possibility to choose the language set for the user in the SMP (M4955)
  • Improvement: Apply all changes of SVE2 resource in SDP resource (M2963)
  • Bugfix: Changing Date Format had no effect when language was set to Default (M5528)
  • Bugfix: First speedial defined was not displayed on the phone (M5201)
  • Bugfix: Setting directory to local still generates directory (M0005979)
  • Bugfix: Generating directory doesn't work on cluster (M0005979)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.17 - General deployment
  • Improvement: Add headset configuration in resource parameters (M4533)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.16 - General deployment
  • Improvement: enable EAP-PEAPv0/MSCHAPv2 method for 802.1x authentication
  • Improvement: Disable by default Do Not Disturb and Call Forward option when creating a new resource (M0002043)
  • Bugfix: Directory storage "clear directory" was not working (M0005271)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.15 - General deployment
  • Bugfix: corrected bug where the last users weren't selected to be in the local directory (M0005032)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.14 - General deployment
  • Feature: Added the possibility to display the name instead of the extension on the screen
  • Improvement: When display extension, only display outgoing extension if defined (M7408)
  • Bugfix: 'Local' directory synchronization policy
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Version 4.13 - General deployment
  • Feature: initial version (M4571)
  • Dependency:
    • Polycom Phone Support module v4.0.3+

Resource configuration interface

GUI unavailable.

The documentation for this resource is the same as most Polycom phones. You can find this generic documentation here
Copyright © Escaux SA