PolycomVVX600 (SDPK)

Description

This resource allows to connect a Polycom VVX 600 IP Phone.

Release notes

Show release notes
Version 5.15.1 - Early deployment
  • Feature: Support Polycoms on Steam with SBC (MCH-706)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 5.15.0 - Early deployment
  • Feature: Source SOP configuration and FMA support (PC-837)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 5.14.0 - Early deployment
  • Feature: added support for Polycom VVX 150 (PC-539)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 5.12.0 - Early deployment
  • Feature: Added support for VVX 250 (M25185)
  • Dependency:
    • Polycom Phone Support module version 5.13.5 or higher
    • System Base Module version 1.4.1 or higher

Version 5.11.0 - Early deployment
  • Feature: Support for pickup on a BLF key (M19406)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.10.1 - Early deployment
  • Bugfix: SRTP on video-enabled VVX (M22350)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.10.0 - Early deployment
  • Feature: Added support for VVXD60 dect (M23150)
  • Feature: Allow to set a fifth softkey on every VVX (M22569)
  • Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
  • Improvement: Allow to adjust screen saver settings for every VVX (M23139)
  • Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569)
  • Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
  • Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.9.1 - Early deployment
  • Bugfix: Some resource settings are not taken into account in case of PUM login (M20283)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.9.0 - Early deployment
  • Feature: Support IP650 and IP335 on internet (M20669)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.8.1 - Early deployment
  • Bugfix: Phone language selection only worked when global setting was selected (M19001)
  • Improvement: Support IP6000 over Internet (M16844)
  • Improvement: Allow to configure SIP Session timer (M19716)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.8.0 - Early deployment
  • Improvement: Code alignment (M0)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.7.1 - Early deployment
  • Bugfix: It was not possible to disable the directory softkey (M18395)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.7.0 - Early deployment
  • Feature: IP7000 on internet (M15791)
  • Feature: SIP peer-specific RTP port range (M16702)
  • Bugfix: Push feature was not working on VVX410 (M16490)
  • Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.6.0 - Early deployment
  • Feature: IP331 on internet (M16829)
  • Improvement: Normalize date and time display for VVXs (M15863)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.5.0 - Early deployment
  • Improvement: Code alignment (M0)
  • Dependency:
    • Polycom Phone Support module version 5.4.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.4.1 - Early deployment
  • Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.4.0 - Early deployment
  • Feature: Allow custom SIP server port (M14770)
  • Feature: Allow custom NTP server (M14742)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.3.0 - Early deployment
  • Feature: added support for user's regional language (M12720)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.2.1 - Early deployment
  • Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.2.0 - Early deployment
  • Bugfix: Headset options were not taken into account by the resource. (M10735)
  • Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
  • Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
  • Improvement: Add video jitter buffer variables. (M11547)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.4 - Early deployment
  • Bugfix: Headset options were not taken into account by the resource. (M10735)
  • Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
  • Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.3 - General deployment
  • Bugfix: Corrected default password setting (M0010260)
  • Bugfix: Restored video codec selection (M10702)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.2 - General deployment
  • Bugfix: Fix datetime format (12/24) in configuration (M8829)
  • Bugfix: SIP Reinvite was broken (fixed) (M8551)
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.1 - General deployment
  • Bugfix: Support for UTF-8 characters (M9321)
  • Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764)
  • Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
  • Bugfix: Showing the extension and the first name on the phone label was not possible (M9367)
  • Limitations: The caching only works with SMP version >= 5.3.0
  • Dependency:
    • Polycom Phone Support module version 5.0.1 or higher
    • System Base Module version 1.4.1 or higher

Version 5.1.0 - General deployment
  • Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992)
  • Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822)
  • Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301)
  • Bugfix: The DND softkey is now hidden when DND is disabled (M7743)
  • Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744)
  • Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274)
  • Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
  • Limitation: BLF unavailable status is not interpreted by the phone. (M0)
  • Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
  • Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
  • Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
  • Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
  • Limitation: directory's filter may not work properly. (M0)
  • Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
  • Limitation: the resource only supports ASCII characters in the variables. (M0)
  • Dependency:
    • Polycom Phone Support module version 5.0.0 or higher
    • System Base Module version 1.4.1 or higher

Version 5.0.0 - General deployment
  • Feature: Support one expansion module (color or paper display) (M8249)
  • Feature: Speeddials and BLF can be mixed, and have absolute positions
  • Feature: Configurable voicemail service extension (M7747)
  • Improvement: BLF (supervision) uses the phones LED to show extended status
  • Improvement: Removed slow operations during apply changes (M7787)
  • Improvement: Enable video setting (M7777)
  • Bugfix: The DND softkey is fully deactivated
  • Bugfix: "Default" qualify policy do not respect global (server) settings (M7307)
  • Bugfix: The softkey configuration was misleading and not correctly applied (M7634)
  • Limitation: The DND softkey cannot be hidden
  • Limitation: Not compatible with Personal User Mobility (PUM)
  • Limitation: Not compatible with m.Connect
  • Dependency:
    • Polycom Phone Support module v4.10.0 or higher
    • System Base Module 1.2.1 or higher

Resource configuration interface

GUI unavailable.

The documentation for this resource is the same as most Polycom phones. You can find this generic documentation here
Copyright © Escaux SA