SangomaVega3000FXS (SDV2)

Description

This resource configures one FXS interface on a Sangoma Vega3000 Gateway.

Release notes

Version 1.1.0 - Early deployment
  • Feature: Added hotline number configuration (M14864)
  • Dependency:
    • Baseline 2.x.x
    • Sangoma Vega Gateway Support >= 1.0.0

Version 1.0.0 - Early deployment
  • Feature: Initial Version (M11801)
  • Dependency:
    • Baseline 2.x.x
    • Sangoma Vega Gateway Support >= 1.0.0

Resource configuration interface

GUI unavailable.

Resource configuration parameters

This resource allows and administrator to configure an FXS port on a given Sangoma Vega 3000.
  • Interface Number: The FXS port for which this resource belongs on the Vega 3000. You have the choice between 1 and 24.
  • Hotline Number: Set here a phone number that will be "automatically" composed when the handset is taken.

alert You should not use the same port for two different resources belonging to the same Gateway.
  • SIP server feature: Note: These technical settings if improperly configured can have impact on the availability of the phone
    • SIP re-invite: allow the voice media to be transferred directly between SIP endpoints through the SIP re-invite procedure. Possible value are:
      • Default: Keep default settings as defined in the Telephony server module (for example Asterisk 1.2.x)
      • Yes: Allow the server to perform the re-invite procedure.
      • No: Do not allow the server to perform the re-invite procedure.
    • Qualify SIP devices registration: In order to monitor the SIP device availability, the Telephony server can send SIP OPTIONS messages (every 60s). If the device does not respond within the defined delay, it will be considered as off-line. Possible values are:
      • Default: Keep the default setting defined in the Telephony server module (for example Asterisk 1.2.x)
      • No: Disable Qualify SIP registration for this device
      • Yes: Enable Qualify SIP registration for this device, with a default timeout value of 2000ms
      • Suggested number: Enable Qualify SIP registration for this device, with the chosen timeout value (expressed in milliseconds).
    • Force specific codec: If this parameter is set to 'Yes', the SIP server will only accept the 3 codecs defined in this resource with the specified preference.
    • First Codec, Second Codec, Third Codec: Ordered list of codec
  • LAN configuration:
    • Use DHCP: Configure the IP address from a DHCP server (default: yes).
    • IP Address: IP address when DCHP config is disabled.
    • Netmask: Netmask when DCHP config is disabled.
    • Gateway: Gateway when DCHP config is disabled.

Limitations

Currently the resource does not support FAX.
Copyright © Escaux SA