GigasetN870SAT (SDG6)
Description
This resource allows to connect compatible satellites (additional base stations) to the Gigaset N870 IP Pro base station in DECT Manager mode.
Release notes
Version 2.0.0 - Early deployment
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3010)
- Improvement: use new Line ID field for MAC bs instead of dedicated var (PC-3088)
- Dependency:
- Gigaset Phone Support >= 1.6.0
- DHCP Server >= 2.5.0 (if used)
- SMP >= 5.15.0
-
- TO DEFINE : RELATION TO TEMPLATE
Version 1.0.0 - Early deployment
- Feature: Initial Release (M23222)
- Dependency:
- Gigaset Phone Support >= 1.4.0
- DHCP Server >= 2.5.0 (if used)
Resource configuration interface
This resource is used to configure a base-station in a (mini-)
multicell DECT Network, where another Gigaset N670/N870 is already operating as a DECT Manager.
To make the link with this manager, the
MAC field must contain its MAC address. The MAC of the base station itself is given in the resource parameters (
BS mac).
Internal doc about Gigaset devices is
here
You can find detailed stuff in Gigaset's wiki
here
NOTE : From SDG6 version 2.0.0, we get rid of the
BS mac parameter and use instead the new 'Line ID' field. Thus a base station resource is uniquely identified by the pair (MAC=MAC of DM, Line ID=MAC of BS).
Resource configuration parameters
- [ Line ID ] : from 2.0.0, used instead of BS mac, same meaning.
- BS mac : the MAC address of the base station the resource stands for (lower cased)
- Cluster : the cluster ID the base station will be included in. A Cluster comprises a number of base stations of a DECT manager that synchronise with each other to enable handovers, roaming and load balancing (see here)
- Sync level : the level in the cluster synchronization tree (see sync planning, levels and in LAN)
- LAN master : whether this base station will be the LAN master regarding synchronization
- BS name : the name used to present the base station in the DECT Manager interface