Version 4.x
Known issues linked to purecloud
Known issues
- When upgrading from Fusion 4.3.0, and error message is provided when doing an template upgrade that indicates a conflict on the callflow *100. This error can be ignored. This is caused by a wrong callflow source in the version 4.3.0.
4.6.1
- MWI light stays on after the consultation and deletion of a Voicemail | 17895 |
FuzerFusion
Version 4.25.0 - Early deployment
Release notes
- Feature: Add profile to configure MME1 resource (PC-2334)
- Improvement: Support ldap directory and reboot for Mitel phones (PC-3279)
- Improvement: Support gigaset configuration from FMA (PC-3279)
- Improvement: Use custom caller name and add translations for voicemail notifier (PC-1325)(PC-1324)
- Improvement: Improve chat message send to notify about new voicemail (PC-1325)
- Improvement: Upgrade API for vCards (PC-1325)
- Improvement: Provide caller's personal DDI to FMU (PC-1572)
- Improvement: Add more information in external voicemail notification (PC-1325)
- Improvement: Add directory centric configuration for SOP API (PC-1606)
- Improvement: Emergency call based on extension's site (PC-1088)
- Improvement: Added variable OriginalCalledDdi MapDDI callflow (PC-1761)
- Improvement: Improve performance in large clusters (PC-1634)
- Improvement: Do not apply queue policies on propagation (PC-1634)
- Improvement: Upgrade tasks at template upgrading (MCH-742)
- Improvement: Make internal provisioning access restrictions configurable (PC-2795)
- Improvement: Set reports to template version when upgrading (TS-4266)
- Improvement: Update database schema to support the column line_id (PC-3183)
- Improvement: Gigaset Nx70 are now configurable from SOP (PC-3023)
- Improvement: FMA now allows asterisk config override (PC-3060)
- Improvement: Support Polycom over Internet for Steam (MCH-706)
- Improvement: Register phones in APL at creation (PC-2919)
- Improvement: Cisco module don't register Fusion in APL anymore (PC-2424)
- Improvement: Support ATA191 and Stentofon configuration from FMA (PC-2807)
- Improvement: Detect astdb corruption on restart (PC-2838)
- Improvement: User status is reloaded on apply changes (PC-2883)
- Bugfix: Fix sudoers permissions with escaux-fma (PC-837)
- Bugfix: Fix bad ETL expression in SDX6 resource generation (TS-879)
- Bugfix: Wrong permissions in tftpboot prevent UEP to fetch endpoint configuration (TS-2154)
- Bugfix: Fix COLP in CallQueuer (TS-2579)
- Bugfix: Fix missing parameter SopFaxNumberOfChannels in SOP profile (TS-2598)
- Bugfix: SopLanguage was ignored for external calls (TS-2626)
- Bugfix: Added missing nl_NL language in sop config (PC-2319)
- Bugfix: Fix value of global parameter TemplateConfRoom12 (PC-2305)
- Bugfix: Shortcodes failed after authentication (TS-2496)
- Bugfix: FMU mobile number not reachable in private mode (TS-2468)
- Bugfix: ATA191 provisioning was failing (PC-1701)
- Bugfix: Fix perl warning on apply-change (TS-1238)
- Bugfix: Report on a long range of time was slow (TS-2169)
- Bugfix: Fix typo in profile documentation (PC-0)
- Bugfix: Calls in queues were not visible in net.Console (TS-2838)
- Bugfix: Fix dbmonitor logging issue when there is no sufficient mysql privilege (TS-3007)
- Bugfix: Fix postsync issues when installing Mail Server module (PC-1723)
- Bugfix: Fix file system concurrency issue when generating new certificate (MCH-597) (TS-3065)
- Bugfix: Fix call termination code due to restriction in NumberReformatter callflow (TS-2004)
- Bugfix: Fix status change not taken into account (TS-3027)
- Bugfix: Busy tone in user profile was not played (TS-4040)
- Bugfix: Queue policies using a same queue were not applied (TS-3617)
- Bugfix: Fix filter fields issues in ReportCDR (TS-1621)
- Bugfix: Column selection was not taken into account in ReportQDR (TS-2531)
- Bugfix: Site callerID not set for emergency call (PC-3425)
- Bugfix: Template upgrade could fails when upgrading tasks (TS-4217)
- Bugfix: Avoid that the escaux-devices-api do too many dbGetProfileParameters in parallel (PC-3329)
- Bugfix: Ensure that provisioning is skipped if an apply changes is ongoing (PC-2961)
- Bugfix: Not possible to change system music on hold (PC-2609)
- Bugfix: Add caching on top of fusionGetQueues to avoid high load issue with queue policies on large setup (TS-5065)
- Bugfix: Force to answer the call before hanging up (TS-4234)
- Bugfix: Polycom provisioning fails when used through SOP DHCP (PC-2785)
- Bugfix: Upgrade SOP API module to fix hanging AMI sessions slowing down apply changes (TS-3810)
- Bugfix: Fix FMA startup on empty DB (PC-3039)
- Bugfix: Outbound proxy templating on Polycom resources was not correctly set (MCH-1265)
- Bugfix: /escaux/etc/resource was not created when no phone resources exist on SMP (PC-2919)
- Bugfix: Minimal voicemail length is now set to 0 (TS-4471)
- Bugfix: device owner information was missing in RWQ reports (PC-1547)
- Dependency:
- SMP Application v5.17.0 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Communication Server
Communication Server v.3.39.4 (intermediate version) Show release notesHide release notes
- Improvement: Make sip auto domain configurable (FMG-813)
- Improvement: Support of Swyx transfer (FMG-813)
Cisco ATA Support
SOP Base
SOP Base v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Create /escaux/etc/resource (PC-2937)
Gigaset Phone Support
- Gigaset Phone Support v.1.7.0 Show release notesHide release notes
- Feature: Nx70 drivers for line_id parameter support (PC-3088)
- Bugfix: Prevent 'provisioning failed' even if went good (PC-3010)
- Bugfix: fix codecs to prevent activation of PCMU (PC-3010)
Gigaset Phone Support v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Install gigaset package supporting FMA config (PC-3010)
- Bugfix: Fix provisioning URL behavior for Nx70 (PC-3010)
- Improvement: Codecs in config for Nx70 and better XML formatting (PC-3010)
Database Schema
Music On Hold
- Music On Hold v.2.0.0 Show release notesHide release notes
- Feature: Update default music on hold and include license files (PC-2609)
- Improvement: Custom music on hold files are not removed any more (PC-2609)
- Improvement: Setup debian packaging (PC-2609)
SOP API
SOP API v.5.17.1 (intermediate version) Show release notesHide release notes
- Bugfix: Explicitely destroy AMI HTTP sessions (TS-3810)
SOP API v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support of ENUMSTRING type (FMG-807)
- Improvement: Re-use HTTP AMI sessions (TS-3511)
- Bugfix: Correct fallback to extension's Secondary phone when Primary doesn't match (TS-680)
SOP API v.5.16.7 (intermediate version) Show release notesHide release notes
- Improvement: Expose call queuer associated to queue policy in vCards (CM-704)
Unified End Point Support
Unified End Point Support v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Return an error when API is being used during an apply changes (TS-4047)
Mitel Phone Support
- Mitel Phone Support v.1.4.0 Show release notesHide release notes
- Feature: drivers for 6863/7/9i allowing reconfigure from SOP (PC-3420)
- Feature: add postsync script to cleanup no more used resources (PC-1925)
- Feature: activate LDAP Directory in Mitel 6867/9i (PC-3403)
- Feature: install Mitel language packs (PC-3402)
- Feature: allow setting admin password and default to same value as Polycom (PC-3402)
- Feature: allow to do a 'phone reload' to trigger refetching from phone (PC-1925)
- Bugfix: make 'phone reboot' working out (PC-1925)
New resource versions
PolycomVVX150
PolycomVVX250
PolycomVVX350
PolycomVVX450
PolycomIP6000
PolycomIP550
PolycomIP560
PolycomIP650
PolycomIP670
PolycomIP331
PolycomIP450
PolycomIP7000
PolycomIP335
PolycomVVX500
PolycomVVX1500
PolycomVVX310
PolycomVVX400
PolycomVVX300
PolycomVVX410
PolycomVVX600
PolycomVVX101
PolycomVVX201
PolycomVVX401
PolycomVVX411
PolycomVVX311
PolycomVVX501
PolycomVVX601
PolycomTrio8500
GigasetN870IP
- GigasetN870IP v.2.1.0 Show release notesHide release notes
- Improvement: use new Line ID field for ipui instead of dedicated var (PC-3088)
- Bugfix: Syntax issue in gen_sip.conf prevented outgoing calls (PC-3279)
- Bugfix: Don't set OutgoingDialPrefix in order to accept E.164 format for called party (PC-3279)
GigasetN870IP v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Extension was not set as caller ID (PC-3669)
GigasetN870IP v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3010)
GigasetN870IP v.1.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect CallerID (TS-10557)
GigasetN870IP v.1.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. Transport must be configurable (PC-3557)
GigasetN870IP v.1.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: no more < > on caller id to prevent breaking XML config (PC-3010)
GigasetN870SAT
- GigasetN870SAT v.2.0.0 Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3010)
- Improvement: use new Line ID field for MAC bs instead of dedicated var (PC-3088)
Mitel6863
- Mitel6863 v.2.0.0 Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3420)
- Bugfix: the language of the Mitel phones must be the one of the user (PC-3401)
- Bugfix: call forward must be disabled on Mitel phones (PC-3400)
- Bugfix: the name of the screen of the Mitel phones needed to be inline with Fusion Policy (PC-3405)
- Bugfix: admin password of the Mitel phone should be the same than the one for the Polycom (PC-3402)
Mitel6867
- Mitel6867 v.2.0.0 Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3420)
- Feature: new type of bottom softkey 'directory' to access LDAP corp. dir. (PC-3403)
- Bugfix: the language of the Mitel phones must be the one of the user (PC-3401)
- Bugfix: call forward must be disabled on Mitel phones (PC-3400)
- Bugfix: the name of the screen of the Mitel phones needed to be inline with Fusion Policy (PC-3405)
- Bugfix: admin password of the Mitel phone should be the same than the one for the Polycom (PC-3402)
Mitel6869
- Mitel6869 v.2.0.0 Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3420)
- Feature: new type of bottom softkey 'directory' to access LDAP corp. dir. (PC-3403)
- Bugfix: the language of the Mitel phones must be the one of the user (PC-3401)
- Bugfix: call forward must be disabled on Mitel phones (PC-3400)
- Bugfix: the name of the screen of the Mitel phones needed to be inline with Fusion Policy (PC-3405)
- Bugfix: admin password of the Mitel phone should be the same than the one for the Polycom (PC-3402)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.23.2 - Early deployment
Release notes
- Bugfix: Allow to call fusion set presence via HTTP (TS-3511)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.23.1 - Early deployment
Release notes
- Feature: Support for stentofon and ATA 191 in FMA (PC-2807)
- Feature: Communication Server defence exporter (PC-2690)
- Feature: Added support for Polycom VVX150 and VVX350 (PC-2382)
- Bugfix: Queue members were not always ringing (TS-3463)
- Bugfix: SDX6 resource missing after apply-change (TS-3476)
- Bugfix: Device owner missing in queue report (PC-1547)
- Bugfix: Visual glitch when filter on input channel on CDR report (TS-1621)
- Bugfix: Queue report displays all column instead of the one selected since version (TS-2531)
- Improvement: Max mysql configuration is now configurable (PC-2486)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Communication Server
Communication Server v.3.39.2 (intermediate version) Show release notesHide release notes
- Bugfix: Logger memory leak (PC-2538)
- Bugfix: Multiple refer transfer leak (PC-2538)
- Bugfix: Queue set member leak (PC-2538)
- Bugfix: Manager HTTP connection leak (PC-2538)
- Bugfix: Postinst breaks new installations (PC-1763)
Communication Server v.3.39.0 (intermediate version) Show release notesHide release notes
- Improvement: Detect CPU time allocated to vSOP (PC-1763)
- Improvement: Call back extension set on SIP INVITE contact header (FMG-792)
- Bugfix: Callflows using LOCK could sometimes run in parallel (FMG-896)
- Deprecated: New installations fail
Polycom Phone Support
Polycom Phone Support v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support for VVX350 (PC-2382)
- Bugfix: Fix VVX-150 interface for Status softkey feature (PC-2727)
Polycom Phone Support v.5.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Case sensitivity issue would cause phone configuration to be removed from /tftpboot (TS-3476)
Turbine Ip Station Support
- Turbine Ip Station Support v.2.0.1 Show release notesHide release notes
- Feature: new driver for SDV3 allowing reconfigure from FMA (PC-2819)
- Improvement: migration of package escaux-turbine-station to git repository (PC-2819)
- Improvement: now use apt to install instead or raw dpkg (PC-2819)
Cisco ATA Support
New resource versions
ReportQDR
ReportCDR
PolycomVVX350
SyncCDRDB
SyncCDRDB v.3.1.0 (intermediate version) Show release notesHide release notes
- get first_name last_name from FCC (PC-1547)
SyncCDRDB v.3.0.5 (intermediate version) Show release notesHide release notes
- Bugfix: TS-44: SDR generation doesn't take state before last run into account leading to missing SDRs
SyncCDRDB v.3.0.4 (intermediate version) Show release notesHide release notes
- Bugfix: Incomplete instance in attribute_log broke the task (TS-833)
Stentofon Turbine Ip Station
Cisco ATA 191
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.23.0 - Early deployment
Release notes
- Feature: escaux-fma override some SOP API (PC-0)
- Improvement: Update Database Schema Module to 3.11.0 (TS-3007)
- Bugfix: Calls in queues were not visible in net.Conosle (TS-2838)
- Bugfix: Give priority to pbx dialplan over national one (PC-303)
- Bugfix: Update Mail Server module to fix configuration update issue (PC-1723)
- Bugfix: Upgrade communication server to fix libcorosync dependency issue (PC-1723)
- Bugfix: Update corosync for baseline5 host compatibility (TS-2973)
- Bugfix: Fix file system concurrency issue when generating new certificate (MCH-597)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.38.1 Show release notesHide release notes
- Improvement: Configurable SIP UDP send buffer (TS-2862)
- Bugfix: Force update of libcorosync4
- Bugfix: Update of libjansson was depending on dahdi
Certificate Generator
Certificate Generator v.1.0.4 (intermediate version) Show release notesHide release notes
- Bugfix: Actual fix for the concurrency issues (PC-1723)
Database Schema
- Database Schema v.3.11.0 Show release notesHide release notes
- Improvement: dbmonitor - Check we have sufficient MySQL privileges prior to any request (TS-3007)
- Bugfix: dbmonitor - Call to archive for cdr table with right arguments
- Bugfix: dbmonitor - Date in archive process must stay identical throughout iterations
Mail Server
Mail Server v.2.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: make update-exim4.conf not fail (PC-1723)
net.Console
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.22.0 - Early deployment
Release notes
- Feature: Update module Fusion Management API (PC-1830)(PC1834)(PC-1976)
- Feature: Added shortcode to change queue forward number for specific status (PC-1022)
- Feature: Monitor queue status via BLF on Polycom phone (PC-1046)
- Feature: Handle exit on key press (DTMF) in QDR report (TS-2449)
- Improvement: Upgrade Sync LDAP task to 2.0.7 (TS-1978)
- Improvement: Update module LDAP Synchronization to 1.17.5 (TS-1978)
- Improvement: Upgrade module Polycom Phone Support to version 5.16.0 (PC-1063)
- Improvement: Use CallGroup for emergency (PC-2307)
- Improvement: Use CallGroup when called is unknown (PC-2307)
- Improvement: Added variable OriginalCalledDdi MapDDI callflow (PC-1761)
- Improvement: Gigaset N510 N720 firmware upgrade (PC-1765)
- Bugfix: Fix call termination code due to restriction in NumberReformatter callflow (TS-2004)
- Bugfix: Update SOP API to fix queue logout on standalone SOP when using queue policies (PC-0)
- Bugfix: Corosync does not start on default installation (PC-1786)
- Bugfix: Avoid blocking Communication Server on corosync restart (TS-2568)
- Bugfix: Fix COLP in CallQueuer (TS-2579)
- Bugfix: Fix missing parameter SopFaxNumberOfChannels in SOP profile (TS-2598)
- Bugfix: SopLanguge was ignored for external calls (TS-2626)
- Bugfix: Queue Code was not displayed in QDR report (TS-2610)
- Bugfix: Added missing nl_NL language in sop config (PC-2319)
- Bugfix: Fix value of global parameter TemplateConfRoom12 (PC-2305)
- Bugfix: Allow null first names in Fusion Management API (PC-1794)
- Bugfix: Fix ordering of queue policies (PC-1794)
- Bugfix: Prevent COLP for public sip trunk (TS-0)
- Bugfix: Align STARTDYNAMICAPPLICATION version (TS-2490)
- Bugfix: Shortcodes failed after authentication (TS-2496)
- Bugfix: FMU mobile number not reachable in private mode (TS-2468)
- Bugfix: ATA191 provisioning was failing (PC-1701)
- Bugfix: Fix perl warning on apply-change (TS-1238)
- Bugfix: Report on a long range of time was slow (TS-2169)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Gigaset Phone Support
- Gigaset Phone Support v.1.5.0 Show release notesHide release notes
- Feature: Upgraded Gigaset N510 firmware to v258 (PC-1765)
- Feature: Upgraded Gigaset N720 firmware to v116 (PC-1765)
Gigaset Phone Support v.1.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix uninitialized vars in postsync script (PC-3919)
LDAP Synchronization
LDAP Synchronization v.1.17.4 (intermediate version) Show release notesHide release notes
- Bugfix: caller_id shouldn't be mandatory (TS-2581)
LDAP Synchronization v.1.17.3 (intermediate version) Show release notesHide release notes
- Bugfix: correct variables to generate right ldap.ini (TS-2581)
LDAP Synchronization v.1.17.2 (intermediate version) Show release notesHide release notes
- Bugfix: doesn't install dependencies as they are now defined in escaux-ldap package 1.17.2 (TS-2581)
- Bugfix: ldap.ini was not written anymore since using apt installation method (TS-2581)
- Bugfix: problem in variables, now passing char_encoding as constant utf8 to allow use this variable slot for caller_id (TS-2581)
LDAP Synchronization v.1.17.1 (intermediate version) Show release notesHide release notes
- Feature: support for setting caller id from LDAP attribute (TS-2581)
LDAP Synchronization v.1.17.0 (intermediate version) Show release notesHide release notes
- Feature: allow creation of 2 DDIs per entry (TS-2581)
- Improvement: now use apt to install escaux-ldap package (TS-2581)
- Bugfix: assign_ddi feature not used (TS-2581)
LDAP Synchronization v.1.16.2 (intermediate version) Show release notesHide release notes
- Bugfix: When resolving the DN to bind with, properly handle a bind failure (TS-2639)
LDAP Synchronization v.1.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: ldap.ini was generated incorrectly in 1.16.0
LDAP Synchronization v.1.16.0 (intermediate version) Show release notesHide release notes
- Feature: Support for Active Directory UPN authentication (PC-1080)
- Deprecated: ldap.ini incorrectly generated
SOP API
Polycom Phone Support
- Polycom Phone Support v.5.16.0 Show release notesHide release notes
- Feature: Ensure virtual phone gets reloaded if parameters.json changes (PC-874)
- Bugfix: Status was not always correctly displayed on VVX (PC-1063)
Polycom Phone Support v.5.15.3 (intermediate version) Show release notesHide release notes
- Improvement: IP networks allowed to access internal provisioning are now configurable (PC-2796)
Communication Server
- Communication Server v.3.38.0 Show release notesHide release notes
- Improvement: Update to latest corosync flatiron (TS-2568)
- Bugfix: Avoid blocking after corosync daemon restart (TS-2568)
- Deprecated: Install only works on Fusion
Communication Server v.3.37.8 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.37.7 (intermediate version) Show release notesHide release notes
- Improvement: Allow to no load modules (FMG-745)
Communication Server v.3.37.6 (intermediate version) Show release notesHide release notes
- Bugfix: func_lock - Under contention it becomes possible that multiple channels will be told they successfully obtained the lock (FMG-896)
Communication Server v.3.37.5 (intermediate version) Show release notesHide release notes
- Bugfix: REFER may contain broken authentication header (FMG-483)
- Bugfix: Allow standard length domain resolution in chan_sip (PC-1770)
Communication Server v.3.37.4 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in SIP redirect (TS-2509)
Communication Server v.3.37.3 (intermediate version) Show release notesHide release notes
- Bugfix: Callflow hooks without channels locking (PC-1612)
Communication Server v.3.37.2 (intermediate version) Show release notesHide release notes
- Improvement: Callflow hooks without channels locking (PC-1612)
- Bugfix: Filtered events should not wake manager sessions (PC-1193) (TS-1565)
Certificate Generator
New resource versions
ReportQDR v.2.2.3 (intermediate version) Show release notesHide release notes
- Bugfix: Report on a long range of time was slow (TS-2169)
SyncLDAP
SyncLDAP v.2.0.6 (intermediate version) Show release notesHide release notes
- Deprecated: Never deployed in production (PC-1080)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.21.1 - Early deployment
Release notes
- Bugfix: Fix ordering of queue policies (PC-1794)
- Bugfix: Allow null first names (PC-1794)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Cisco ATA Support
- Cisco ATA Support v.2.3.0 Show release notesHide release notes
- Feature: Upgraded firmware of ATA191 to 11.1SR4 (PC-1701)
- Improvement: Optimized package size (PC-1701)
- Bugfix: ATA 191 failed to provision (PC-1701)
- Bugfix: Support provisioning from internet (PC-1769)
SOP API
- SOP API v.5.16.1 Show release notesHide release notes
- Bugfix: Location card should be last in list (PC-1794)
- Improvement: Support 'Penalty' (with uppercase P) query parameter in fusionQueuePolicySetState
New resource versions
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.21.0 - Early deployment
Release notes
- Improvement: Improve performance in large clusters (PC-1634)
- Improvement: Do not apply queue policies on propagation (PC-1634)
- Bugfix: Fix typo in profile documentation (PC-0)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.17 - Early deployment
Release notes
- Bugfix: Apply changes failed with gigaset N510 and N720 devices (PC-3919)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.16 - Early deployment
Release notes
- Bugfix: Remove duplicate upgrade script (PC-3900)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.15 - Early deployment
Release notes
- Bugfix: Upgrade communication server to fix Sweet32 security flaw (PC-3763)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.41.0 (intermediate version) Show release notesHide release notes
- Feature: Distributed device state using SIP (PC-2600)
- Improvement: Initialize distributed device state cluster (CM-939)
- Improvement: Exclude peer from distributed device state (CM-939)
Communication Server v.3.40.0 (intermediate version) Show release notesHide release notes
- Feature: Prometheus metrics support (PC-2707)
- Improvement: astdb error count exported (PC-2836)
- Improvement: astdb reliability upgrade (PC-3071)
- Improvement: Increased kill timeout (PC-3071)
- Improvement: Possible to force stop subscriptions (PC-2839)
- Bugfix: Crash in send_provisional_keepalive (PC-3150)
- Bugfix: Strict sip peer identification based on callbackextension (TS-4396)
Communication Server v.3.39.9 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.39.8 (intermediate version) Show release notesHide release notes
- Bugfix: SIP session refresh could timeout too early when the refresh time was too low (FMG-1773)
Communication Server v.3.39.7 (intermediate version) Show release notesHide release notes
- Improvement: Include voicemail config generated by FMA (PC-3927)
Communication Server v.3.39.6 (intermediate version) Show release notesHide release notes
- Bugfix: Strict sip peer identification based on callbackextension (FMG-1068)
Communication Server v.3.39.5 (intermediate version) Show release notesHide release notes
- Bugfix: Some astdb corruption was not detected (PC-2838)
Communication Server v.3.39.4 (intermediate version) Show release notesHide release notes
- Improvement: Make sip auto domain configurable (FMG-813)
- Improvement: Support of Swyx transfer (FMG-813)
Communication Server v.3.39.3 (intermediate version) Show release notesHide release notes
- Improvement: Prometheus exporter for defence (PC-2690)
Communication Server v.3.39.2 (intermediate version) Show release notesHide release notes
- Bugfix: Logger memory leak (PC-2538)
- Bugfix: Multiple refer transfer leak (PC-2538)
- Bugfix: Queue set member leak (PC-2538)
- Bugfix: Manager HTTP connection leak (PC-2538)
- Bugfix: Postinst breaks new installations (PC-1763)
Communication Server v.3.39.0 (intermediate version) Show release notesHide release notes
- Improvement: Detect CPU time allocated to vSOP (PC-1763)
- Improvement: Call back extension set on SIP INVITE contact header (FMG-792)
- Bugfix: Callflows using LOCK could sometimes run in parallel (FMG-896)
- Deprecated: New installations fail
Communication Server v.3.38.1 (intermediate version) Show release notesHide release notes
- Improvement: Configurable SIP UDP send buffer (TS-2862)
- Bugfix: Force update of libcorosync4
- Bugfix: Update of libjansson was depending on dahdi
Communication Server v.3.38.0 (intermediate version) Show release notesHide release notes
- Improvement: Update to latest corosync flatiron (TS-2568)
- Bugfix: Avoid blocking after corosync daemon restart (TS-2568)
- Deprecated: Install only works on Fusion
Communication Server v.3.37.8 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.37.7 (intermediate version) Show release notesHide release notes
- Improvement: Allow to no load modules (FMG-745)
Communication Server v.3.37.6 (intermediate version) Show release notesHide release notes
- Bugfix: func_lock - Under contention it becomes possible that multiple channels will be told they successfully obtained the lock (FMG-896)
Communication Server v.3.37.5 (intermediate version) Show release notesHide release notes
- Bugfix: REFER may contain broken authentication header (FMG-483)
- Bugfix: Allow standard length domain resolution in chan_sip (PC-1770)
Communication Server v.3.37.4 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in SIP redirect (TS-2509)
Communication Server v.3.37.3 (intermediate version) Show release notesHide release notes
- Bugfix: Callflow hooks without channels locking (PC-1612)
Communication Server v.3.37.2 (intermediate version) Show release notesHide release notes
- Improvement: Callflow hooks without channels locking (PC-1612)
- Bugfix: Filtered events should not wake manager sessions (PC-1193) (TS-1565)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.14 - Early deployment
Release notes
- Bugfix: Upgrade MOH module to restore legacy mp3 (PC-3607)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.13 - Early deployment
Release notes
- Bugfix: Keep custom profiles after upgrade (PC-2806)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.12 - Early deployment
Release notes
- Bugfix: Not possible to change system music on hold (PC-2609)
- Bugfix: Avoid that the escaux-devices-api do too many dbGetProfileParameters in parallel (PC-3329)
- Bugfix: Ensure that provisioning is skipped if an apply changes is ongoing (PC-2961)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Music On Hold
- Music On Hold v.2.0.0 Show release notesHide release notes
- Feature: Update default music on hold and include license files (PC-2609)
- Improvement: Custom music on hold files are not removed any more (PC-2609)
- Improvement: Setup debian packaging (PC-2609)
Unified End Point Support
Unified End Point Support v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Return an error when API is being used during an apply changes (TS-4047)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.11 - Early deployment
Release notes
- Bugfix: Add caching on top of fusionGetQueues to avoid high load issue with queue policies on large setup (TS-5065)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.10 - Early deployment
Release notes
- Improvement: Added support for Polycom VVX150 and VVX350 (PC-2382)
- Bugfix: Upgrade SOP API module to fix hanging AMI sessions slowing down apply changes (TS-3810)
- Bugfix: Polycom provisioning fails when used through SOP DHCP (PC-2785)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Polycom Phone Support
- Polycom Phone Support v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support for VVX350 (PC-2382)
- Bugfix: Fix VVX-150 interface for Status softkey feature (PC-2727)
Polycom Phone Support v.5.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Case sensitivity issue would cause phone configuration to be removed from /tftpboot (TS-3476)
Polycom Phone Support v.5.16.0 (intermediate version) Show release notesHide release notes
- Feature: Ensure virtual phone gets reloaded if parameters.json changes (PC-874)
- Bugfix: Status was not always correctly displayed on VVX (PC-1063)
SOP API
SOP API v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support of ENUMSTRING type (FMG-807)
- Improvement: Re-use HTTP AMI sessions (TS-3511)
- Bugfix: Correct fallback to extension's Secondary phone when Primary doesn't match (TS-680)
SOP API v.5.16.7 (intermediate version) Show release notesHide release notes
- Improvement: Expose call queuer associated to queue policy in vCards (CM-704)
SOP Base
SOP Base v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Create /escaux/etc/resource (PC-2937)
New resource versions
PolycomVVX350
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.9 - Early deployment
Release notes
- Improvement: Set the minimal voicemail length to 0 (TS-4471)
- Improvement: Set reports to template version when upgrading (TS-4266)
- Bugfix: Template upgrade could fails when upgrading tasks (TS-4217)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- net.Supervisor
- net.Supervisor v.1.6.0 Show release notesHide release notes
- Feature: Added parsing of QUEUEACCOUNTCODE event from queue_log (M10885)
- Improvement: Menu buttons and queue selection combobox moved to the top of the interface in order to display big queue names (M9270)
- Bugfix: Fixed issue related to transfer time count as waiting time (M10541)
LDAP Synchronization
LDAP Synchronization v.1.17.4 (intermediate version) Show release notesHide release notes
- Bugfix: caller_id shouldn't be mandatory (TS-2581)
LDAP Synchronization v.1.17.3 (intermediate version) Show release notesHide release notes
- Bugfix: correct variables to generate right ldap.ini (TS-2581)
LDAP Synchronization v.1.17.2 (intermediate version) Show release notesHide release notes
- Bugfix: doesn't install dependencies as they are now defined in escaux-ldap package 1.17.2 (TS-2581)
- Bugfix: ldap.ini was not written anymore since using apt installation method (TS-2581)
- Bugfix: problem in variables, now passing char_encoding as constant utf8 to allow use this variable slot for caller_id (TS-2581)
LDAP Synchronization v.1.17.1 (intermediate version) Show release notesHide release notes
- Feature: support for setting caller id from LDAP attribute (TS-2581)
LDAP Synchronization v.1.17.0 (intermediate version) Show release notesHide release notes
- Feature: allow creation of 2 DDIs per entry (TS-2581)
- Improvement: now use apt to install escaux-ldap package (TS-2581)
- Bugfix: assign_ddi feature not used (TS-2581)
LDAP Synchronization v.1.16.2 (intermediate version) Show release notesHide release notes
- Bugfix: When resolving the DN to bind with, properly handle a bind failure (TS-2639)
LDAP Synchronization v.1.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: ldap.ini was generated incorrectly in 1.16.0
LDAP Synchronization v.1.16.0 (intermediate version) Show release notesHide release notes
- Feature: Support for Active Directory UPN authentication (PC-1080)
- Deprecated: ldap.ini incorrectly generated
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.8 - Early deployment
Release notes
- Improvement: Make internal provisioning access restrictions configurable (PC-2795)
- Improvement: Upgrade tasks at template upgrading (MCH-742)
- Bugfix: Busy tone in user profile was not played (TS-4040)
- Bugfix: Queue policies using a same queue were not applied (TS-3617)
- Bugfix: Fix filter fields issues in ReportCDR (TS-1621)
- Bugfix: Column selection was not taken into account in ReportQDR (TS-2531)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
SOP API v.5.16.4 (intermediate version) Show release notesHide release notes
- Bugfix: Disable usage of state interface (TS-3463)
Polycom Phone Support
New resource versions
Generic SIP phone
Generic SIP phone v.1.1.0 (intermediate version) Show release notesHide release notes
- Deprecated: never used in prod
Generic SIP phone v.1.06 (intermediate version) Show release notesHide release notes
- Improvement: Added optional H.263 codec. (M0005447)
Generic SIP phone v.1.05 (intermediate version) Show release notesHide release notes
- Improvement: Allow to use the remote-party-id header. (M0004626)
Generic SIP phone v.1.04 (intermediate version) Show release notesHide release notes
- Feature: Re-enable the option to use the user's pincode as the secret
Generic SIP phone v.1.03 (intermediate version) Show release notesHide release notes
- Added codec selection
- Added support for active-active softphones
Generic SIP phone v.1.02 (intermediate version) Show release notesHide release notes
- Added possibility to set no password
- Added possibility to choose the DTMF mode
- Added possibility to choose a password different from the pincode (default: 0000)
Generic SIP phone v.1.01 (intermediate version) Show release notesHide release notes
-
- Generic SIP phone v.1.0.9 (intermediate version) Show release notesHide release notes
- Feature: Added the possibility to add remote party presence information in the pidfnote (M8423)
- Feature: Added the possibility to configure the ptime (M8709)
- Generic SIP phone v.1.0.8 (intermediate version) Show release notesHide release notes
- Deprecated: Revoked NAT support (M0007329)
Generic SIP phone v.1.0.7 (intermediate version) Show release notesHide release notes
- Improvement: H.261 / H.263 / H.263+ / H.264 video support
Generic SIP phone v.1.0.12 (intermediate version) Show release notesHide release notes
- Improvement: Allow to configure SIP Session timer (M19716)
ReportCDR
SyncLDAP
SyncLDAP v.2.0.6 (intermediate version) Show release notesHide release notes
- Deprecated: Never deployed in production (PC-1080)
ReportQDR
ReportQDR v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: event QUEUEACCOUNTCODE was not processed when logged before ENTERQUEUE (TS-2610)
ReportQDR v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: Handle exit on key press (DTMF) (TS-2449)
Cisco ATA 191
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.7 - Early deployment
Release notes
- Feature: Add profile to configure MME1 resource (PC-2334)
- Improvement: Improve performance in large clusters (PC-1634)
- Improvement: Do not apply queue policies on propagation (PC-1634)
- Bugfix: Calls in queues were not visible in net.Console (TS-2838)
- Bugfix: Fix dbmonitor logging issue when there is no sufficient mysql privilege (TS-3007)
- Bugfix: Fix postsync issues when installing Mail Server module (PC-1723)
- Bugfix: Fix file system concurrency issue when generating new certificate (MCH-597) (TS-3065)
- Bugfix: Fix call termination code due to restriction in NumberReformatter callflow (TS-2004)
- Bugfix: Fix status change not taken into account (TS-3027)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- net.Supervisor
- net.Supervisor v.1.6.0 Show release notesHide release notes
- Feature: Added parsing of QUEUEACCOUNTCODE event from queue_log (M10885)
- Improvement: Menu buttons and queue selection combobox moved to the top of the interface in order to display big queue names (M9270)
- Bugfix: Fixed issue related to transfer time count as waiting time (M10541)
SOP API
SOP API v.5.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Location card should be last in list (PC-1794)
- Improvement: Support 'Penalty' (with uppercase P) query parameter in fusionQueuePolicySetState
SOP API v.5.16.0 (intermediate version) Show release notesHide release notes
- Improvement: Improve performance in large clusters (PC-1634)
Certificate Generator
Certificate Generator v.1.0.4 (intermediate version) Show release notesHide release notes
- Bugfix: Actual fix for the concurrency issues (PC-1723)
Certificate Generator v.1.0.3 (intermediate version) Show release notesHide release notes
- Improvement: Fix concurrency issue (MCH-597)
- Deprecated: Actually not the proper fix. 1.0.4 does this (MCH-597)
Database Schema
- Database Schema v.3.11.0 Show release notesHide release notes
- Improvement: dbmonitor - Check we have sufficient MySQL privileges prior to any request (TS-3007)
- Bugfix: dbmonitor - Call to archive for cdr table with right arguments
- Bugfix: dbmonitor - Date in archive process must stay identical throughout iterations
Database Schema v.3.10.0 (intermediate version) Show release notesHide release notes
- Feature: Add table to store current queues for extension. (PC-1634)
Database Schema v.3.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: Leave dbmonitor if a delete request fails when archiving (PC-541)
Database Schema v.3.9.0 (intermediate version) Show release notesHide release notes
- Feature: Call quality statistics (PC-749)
Mail Server
Mail Server v.2.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: make update-exim4.conf not fail (PC-1723)
net.Console
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.6 - Early deployment
Release notes
- Improvement: Added variable OriginalCalledDdi MapDDI callflow (PC-1761)
- Bugfix: Fix COLP in CallQueuer (TS-2579)
- Bugfix: Fix missing parameter SopFaxNumberOfChannels in SOP profile (TS-2598)
- Bugfix: SopLanguge was ignored for external calls (TS-2626)
- Bugfix: Added missing nl_NL language in sop config (PC-2319)
- Bugfix: Fix value of global parameter TemplateConfRoom12 (PC-2305)
- Bugfix: Shortcodes failed after authentication (TS-2496)
- Bugfix: FMU mobile number not reachable in private mode (TS-2468)
- Bugfix: ATA191 provisioning was failing (PC-1701)
- Bugfix: Fix perl warning on apply-change (TS-1238)
- Bugfix: Report on a long range of time was slow (TS-2169)
- Bugfix: Fix typo in profile documentation (PC-0)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Cisco ATA Support
- Cisco ATA Support v.2.3.0 Show release notesHide release notes
- Feature: Upgraded firmware of ATA191 to 11.1SR4 (PC-1701)
- Improvement: Optimized package size (PC-1701)
- Bugfix: ATA 191 failed to provision (PC-1701)
- Bugfix: Support provisioning from internet (PC-1769)
New resource versions
Cisco ATA 191
Cisco ATA 191 v.1.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Sync code was not running (TS-2205)
- Deprecated: intermediate fix version
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.5 - Early deployment
Release notes
- Improvement: Use custom caller name and add translations for voicemail notifier (PC-1325)(PC-1324)
- Improvement: Improve chat message send to notify about new voicemail (PC-1325)
- Improvement: Upgrade API for vCards (PC-1325)
- Improvement: Provide caller's personal DDI to FMU (PC-1572)
- Improvement: Add more information in external voicemail notification (PC-1325)
- Improvement: Add directory centric configuration for SOP API (PC-1606)
- Improvement: Emergency call based on extension's site (PC-1088)
- Bugfix: Fix sudoers permissions with escaux-fma (PC-837)
- Bugfix: Fix bad ETL expression in SDX6 resource generation (TS-879)
- Bugfix: Wrong permissions in tftpboot prevent UEP to fetch endpoint configuration (TS-2154)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Communication Server
TFTP Server
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.4 - Early deployment
Release notes
- Bugfix: PUM login/logout was failing (TS-1916)
- Bugfix: Fix typo on a queue ring strategy setting (leastrecent) (TS-1933)
- Bugfix: Revert module downgrade (TS-1909)
- Bugfix: "http(s)://" was not allowed in the browser navigation bar (TS-1604)
- Bugfix: Outgoingcall were failing (TS-1835)
- Bugfix: Specific incomingcallcatcher was not working (TS-1835)
- Bugfix: Gosub was executed even if hook does not exist (TS-1936)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Application Management Server
net.Console
TFTP Server
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.3 - Early deployment
Release notes
- Bugfix: Remove context Device in RestrictInternal (TS-1836)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.2 - Early deployment
Release notes
- Bugfix: Wrong package included in Cisco ATA Support (M0)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.1 - Early deployment
Release notes
- Improvement: Make optional creation of extension with MappDDI profile from LDAP Synchronization module (PC-1080)
- Bugfix: Add default and alternative callerid (PC-1339)
- Bugfix: Add missing translation (PC-1339)
- Bugfix: Access extensions from default context (TS-1540)
- Bugfix: Added missing Mitel firmware (PC-516)
- Bugfix: Prevent blank dropdown when listing extension through API (PC-1340)
- Bugfix: Configuration baddly displayed in ConnectMe (PC-1291)
- Bugfix: Callerid must be read only (PC-1291)
- Bugfix: Removed faulty ETL expr and replaced by default values in several modules (TS-1642)
- Bugfix: Fix wrong prompt translation (PC-1290)
- Bugfix: Missing support for Cisco ATA 191 (PC-482)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
LDAP Synchronization
LDAP Synchronization v.1.15.3 (intermediate version) Show release notesHide release notes
- Bugfix: Don't generate error when no allowed ips are defined (M0)
LDAP Synchronization v.1.15.2 (intermediate version) Show release notesHide release notes
- Bugfix: Correctly pass UTF-8 through (TS-268)
LDAP Synchronization v.1.15.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow other sources to query LDAP (M24156)
SOP API
- SOP API v.5.14.0 Show release notesHide release notes
- Feature: Support multiple databases (PC-308)
- Feature: Support DNS for queue policy subscriptions (PC-841)
- Feature: Provide backup url for queue policy toggle (PC-686)
- Bugfix: Prevent apply-change error when no queue is configured (PC-1271)
- Bugfix: Prevent blank dropdown when listing extension (PC-1340)
- Bugfix: Fix issue causing callback loop when activating queue policy
Sounds
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.0 - Early deployment
Release notes
- Feature: Add API to upload prompts and MOH (PC-720)
- Feature: Added template resources for new Mitel phones (PC-0)
- Improvement: Add SMP API logging in SMPWebAudit (PC-1368)
- Improvement: Be able to skip specific actions when mobile number of a user is called (PC-1338)
- Improvement: Improve user's callflow regarding mobile call forwarding changes (PC-1338)
- Improvement: Expose voicemail email sender in SOP profile (PC-1012)
- Bugfix: Voicemail chat notification was not working when SDX6 was secondary phone (TS-1383)
- Bugfix: Contacts were duplicated in ConnectMe search (PC-1289)
- Bugfix: Use default context in custom presence callflow (PC-0)
- Bugfix: dbmonitor logs could fill disk space on standby SOPs (PC-541)
- Bugfix: Queue policy status redundancy puts back agents in queue (TS-1397)
- Bugfix: Missing database schema module upgrade for queue boards support (PC-0)
- Bugfix: AMI events blocks the SIP thread (PC-1193)
- Bugfix: Fix broken sudo for installation and upgrade (TS-1499)
- Dependency:
- SMP Application v5.15.1 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Communication Server
- Communication Server v.3.37.0 Show release notesHide release notes
- Feature: Custom from user for subscriptions (PC-839)
- Improvement: Filtering out event categories from manager (PC-1193)
- Improvement: Dropping dialplan events by default (PC-1193)
- Improvement: Presence job filter without channels locking (PC-1427)
SOP API
SOP API v.5.13.0 (intermediate version) Show release notesHide release notes
- Feature: Expose API with vCards for queue policy of user (PC-813)
- Bugfix: Ensure extensions are sorted numerically in dbGetDirectoryInfoBody (PC-1289)
Database Schema
Database Schema v.3.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Align directory_entry last name size in SMP and SOP (PC-758)
Database Schema v.3.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: Leave dbmonitor if a delete request fails when archiving (PC-541)
File Manager
Polycom Phone Support
Polycom Phone Support v.5.15.1 (intermediate version) Show release notesHide release notes
- Bugfix: Wrong sudoers permissions (TS-1499)
- Deprecated: Breaks sudo (TS-1499)
New resource versions
Mitel6867
Mitel6873
Mitel6863
Mitel6869
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.19.0 - Early deployment
Release notes
- Feature: Added Stentophone support (PC-942)
- Feature: User can change his caller ID (PC-1053)
- Feature: Source SOP configuration and FMA support (PC-837)
- Feature: Make the display configurable in case of internal forward (PC-970)
- Feature: Add TemplateUserDefaults profile (PC-923)
- Feature: Added spoecific processing when the mobile phone of a user is called (PC-969)
- Feature: Configure Polycom Phone from FCC (PC-837)
- Feature: Cal Queue overview in Connect Me (PC-775)
- Feature: notify of new voicemail via chat (PC-652)
- Feature: Add business role parameter to presence (M0)
- Feature: Support storing penalty in queue_policy table (M0)
- Feature: HTTP AMI support (PC-314)
- Improvement: By default ring primary and secondary phone in the queue (PC-1030)
- Improvement: Improve presence notification performance (PC-314)
- Bugfix: No audio when HA module is used (TS-1199) (PC-832)
- Bugfix: Video rtp port were allocated for non-video calls (TS-1145)
- Bugfix: incorrect default countrycode (TS-1117)
- Bugfix: Incorrect labels on POlycom speedials (PC-803)
- Bugfix: Send report even when empty (PC-574)
- Bugfix: Default value of some profiles parameters were incorrect (TS-840)
- Bugfix: SVE resource should be monitored (PC-875)
- Bugfix: Preserve profile parameter when LDAP value is empty (TS-847)
- Bugfix: Queue members lost after asterisk crash (TS-689)
- Bugfix: Removed unssuported status page on Polycom SoundPoints (TS-648)
- Bugfix: Allow more characters in register password (TS-587)
- Bugfix: Busy tone played by user callflow was not always heard (TS-356)
- Bugfix: apply-change error on fax extension (TS-1237)
- Bugfix: Fixed "Average Converstation Duration" in reportCDR (TS-529)
- Bugfix: On login intentional status presence is not displayed (PC-759)
- Dependency:
- SMP Application v5.15.0 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Unified End Point Support
Polycom Phone Support
SOP Base
Communication Server
- Communication Server v.3.36.1 Show release notesHide release notes
- Bugfix: Remove global video codec (TS-1145)
- Bugfix: Allow directrtpsetup when Dial option U and M are used (FMG-357)
Communication Server v.3.36.0 (intermediate version) Show release notesHide release notes
- Improvement: RTP bind address follows SIP TLS (PC-832)
- Improvement: Better support of privacy header (FMG-335)
- Bugfix: Crash on transfer with no header parameters (FMG-335) (TS-1214)
Communication Server v.3.35.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade libastphonenumber asterisk function (FMG-251)
- Improvement: Support short code checks on libastphonenumber (FMG-272)
- Improvement: Shared last call wrapup time between queues (PC-786)
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Bugfix: Semicolon issue on contact header (TS-395)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Turbine Ip Station Support
SOP API
SOP API v.5.12.1 (intermediate version) Show release notesHide release notes
- Bugfix: Do not remove users from queues with legacy members (TS-567)
SOP API v.5.12.0 (intermediate version) Show release notesHide release notes
- Bugfix: Support queues on multiple sops (PC-660)
- Improvement: Get value of a variable via API ccGetChannels (PC-654)
SOP API v.5.11.5 (intermediate version) Show release notesHide release notes
- Bugfix: Intentional status presence was lost after queue presence update (backport) (TS-3050)
New resource versions
SyncLDAP
- SyncLDAP v.2.0.5 Show release notesHide release notes
- Bugfix: restore primary and secondary phone provisioning (TS-641)
- Bugfix: preserve profile parameter when ldap value is empty (TS-847)
PolycomVVX500
Polycom Virtual Phone
ReportQDR
ReportQDR v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed variable escaping (TS-14)
PolycomIP331
PolycomIP335
PolycomIP450
PolycomIP550
PolycomIP560
PolycomIP6000
PolycomIP650
PolycomIP670
PolycomIP7000
PolycomTrio8500
PolycomVVX101
PolycomVVX1500
PolycomVVX201
PolycomVVX250
PolycomVVX300
PolycomVVX301
PolycomVVX310
PolycomVVX311
PolycomVVX400
PolycomVVX401
PolycomVVX410
PolycomVVX411
PolycomVVX450
PolycomVVX501
PolycomVVX600
PolycomVVX601
ReportCDR
ReportCDR v.2.17.0 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed SQL injection in summary report (M25582) - link
- Bugfix: Fixed duration for queued calls (TS-529)
- Improvement: Display the original called number (M20719) - link
- Improvement: Allow not operator "!" in filters (M20005) - link
- Improvement: Added filters "start_hour" and "end_hour" (M22496) - link
- Improvement: Added a mysql query timeout (M23755) - link
- Deprecated: Changes in var_X were not persistent
ReportCDR v.2.16.0 (intermediate version) Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
ReportCDR_Q
Stentofon Turbine Ip Station
- Stentofon Turbine Ip Station v.1.4.0 Show release notesHide release notes
- Bugfix: NTP server should be the SOP (PC-942)
- Bugfix: The firmware to be downloaded is defined by the module (PC-942)
New action versions
Included components
Modules
Resources
Actions
Version 4.18.0 - Early deployment
Release notes
- Feature: Notify of new voicemail via chat (PC-652)
- Feature: Enable LargeInternalDirectory (PC-469)
- Improvement: Fix directory patterns and use normal redir (PC-469)
- Improvement: Fix OutgoingCallCatcher with LargeInternalDirectory (MCH-479)
- Improvement: Fix IntraCluster routing with LargeInternalDirectory (PC-965)
- Improvement: Use startdynamicapplication for Template-MapDDI profile (PC-760)
- Improvement: Replace Redirect by GotoExtension in several callflows (PC-760)
- Improvement: Old receptionist callflow not used anymore removed (PC-760)
- Dependency:
- SMP Application v5.15.0 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.6 - Early deployment
Release notes
- Bugfix: Backport fix typo breaking Fusion presence (TS-3050)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.5 - Early deployment
Release notes
- Bugfix: dbmonitor logs fill disk space (PC-541)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
Database Schema
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.4 - Early deployment
Release notes
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.3 - Early deployment
Release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.34.3 Show release notesHide release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
- Communication Server v.3.34.2 (intermediate version) Show release notesHide release notes
- Improvement: Expose "ignoresdpversion" asterisk option (FMG-254)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.1 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect semicolon on transfer contact header (TS-395)
- Bugfix: External voicemail notify script would reset permissions (PC-652)
- Bugfix: Avoid manager event on RTCP read (TS-513)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.2 - Early deployment
Release notes
- Bugfix: Legacy members where removed from queues at apply changes (TS-567)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.1 - Early deployment
Release notes
- Bugfix: Missing parameter NotifyFormat in Template-SipTrunk profile (TS-385)
- Bugfix: PC-314 Use context 'default' everywhere (TS-382)
- Bugfix: PC-314 deactivate virtual extensions (TS-177)
- Bugfix: PC-314 Use context 'default' in SOP API (TS-382)
- Bugfix: Disable CDR for presence (PC-784)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
- SOP API
- SOP API v.5.11.3 Show release notesHide release notes
- Improvement: Open firewall rules (FMG-221)
- Bugfix: Use context 'default' for presence (PC-314) (TS-382)
- Bugfix: Skip queues where no configuration is set (TS-384)
Cluster & SOP Active-Active Support
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
SyncLDAP
SyncLDAP v.2.0.3 (intermediate version) Show release notesHide release notes
- Bugfix: Task failed with profile parameter different from Template-User (M24648)
- Deprecated: DDIs no synced any more (TS-277)
New action versions
- STARTDYNAMICAPPLICATION.8.8.0
Included components
Modules
Resources
Actions
Version 4.17.0 - Early deployment
Release notes
- Feature: Allow to apply queue policies by parameter (PC-153)
- Feature: direct device calling through cluster (PC-209)
- Feature: Added support for Yealink T41P/T42S/T46S/T53W/T57W (PC-366)
- Feature: Added support for Cisco ATA 191 (PC-482)
- Improvement: Upgrade mserver to fix defence performance (PC-100)
- Improvement: Updated Fax Server (PC-109)
- Improvement: Replaced CRON "RSync" scheduling by "LSyncd" for prompts (PC-111)
- Improvement: Improve join/leave empty granularity (PC-120)
- Improvement: distributed device configurable (PC-210)
- Improvement: Install Fusion API (PC-310)
- Improvement: Use FusionSetPresence in callflow (PC-314)
- Improvement: Directory-centric queues for FleetManager integration (PC-434)
- Improvement: add busy tone as 2nd action (PC-466)
- Improvement: Add translation for status OutOfOffice (PC-485)
- Improvement: Ensure escaux-devices-api is started (PC-524)
- Improvement: Upgraded Polycom resources to 5.14.0 (PC-539)
- Improvement: Added RestrictEmergency (PC-555)
- Improvement: Disable net.console and mserver by default (PC-556)
- Improvement: Update system base, sop base, tftp (PC-581)
- Improvement: Update reportQDR to version 2.2.0 (TS-14)
- Improvement: removed completely deprecated idle url (O-10327979)
- Bugfix: Fixed parameters QueueRule and RingallRetry (PC-672)
- Bugfix: Bad called format for calls from FMU phones (TS-159)
- Bugfix: Incorrect RTP source IP with HA (TS-173)
- Bugfix: Bad prompt name UserSick in CallQueuer (TS-176)
- Bugfix: no queue policies in dialplan (MCH-249)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
Database Schema
Polycom Phone Support
Cisco ATA Support
SOP API
- SOP API v.5.11.2 Show release notesHide release notes
- Bugfix: Use boolean instead of integer to indicate presence
- Bugfix: Fix sorting in dbGetDirectoryInfo
- Bugfix: Ensure queue policy reload exits if no response from asterisk
SOP API v.5.11.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix issue preventing to set queue policy state
SOP API v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support default state per queue policy (PC-313)
- Feature: Expose Profile Parameters in Fusion Presence (PC-310)
- Improvement: Fusion Presence centralized refresh (PC-314)
- Bugfix: Status synchronization failed when status permissions was configured (FMG-128)
Cluster & SOP Active-Active Support
Cluster & SOP Active-Active Support v.4.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Optimize sync HTTP request computation (FMG-58)
Communication Server
- Communication Server v.3.34.0 Show release notesHide release notes
- Improvement: res_json now based on libjansson to fix memory leak (PC-460)
- Improvement: libsrtp upgrade for SRTP stability (PC-692)
- Bugfix: Leak in AMI presence state reader (PC-737)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.33.1 (intermediate version) Show release notesHide release notes
- Bugfix: Duplicate presence job filter could deadlock on slow nodes (PC-667)
- Bugfix: Timestamps not played back correctly (TS-295)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.33.0 (intermediate version) Show release notesHide release notes
- Feature: Distributed device state (PC-210)
- Feature: AMI HTTP support (PC-314)
- Improvement: Increased AMI HTTP POST size (PC-314)
- Improvement: Forward SIP redirect URI parameters (FMG-118)
- Bugfix: Memory leak on PIDF NOTIFY parsing (TS-18)
- Bugfix: Crash in stringfields management (TS-12)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.32.0 (intermediate version) Show release notesHide release notes
- Feature: New channels and uptime SOP CLI commands (M24628) - link
- Feature: Create SIP peers using AMI (M25225) - link
- Feature: Create SIP outbound registrations using AMI (M25226) - link
- Improvement: Ensure SIPMute never blocks for too long (M25131) - link
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
Queue
Queue v.3.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow the caller to start a callflow during holdtime (M0022551)
ReportQDR
- ReportQDR v.2.2.0 Show release notesHide release notes
- Improvement: show duration in minutes (M25421)
- Bugfix: filters didn't work anymore (TS-14)
- Deprecated: Wrong variable escaping (TS-14)
ReportQDR v.2.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Implemented additional set of filters (M21611)
- Improvement: Keep the temporary db table for debugging (M0)
- Improvement: Allow not operator "!" in filters (M20005)
- Feature: Allow selection of displayed columns in a summary report (M24803)
- Deprecated: Filters don't work on this version (TS-14)
ReportQDR v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Report on a long range of time was slow (TS-2169)
PolycomIP331
PolycomIP331 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP331 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP335
PolycomIP335 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP335 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP450
PolycomIP450 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP450 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP550
PolycomIP550 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP550 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP560
PolycomIP560 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP560 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP6000
PolycomIP6000 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP6000 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP650
PolycomIP650 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP650 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP670
PolycomIP670 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP670 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP7000
PolycomIP7000 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP7000 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomTrio8500
PolycomVVX101
PolycomVVX101 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX101 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX1500
PolycomVVX1500 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX1500 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX201
PolycomVVX201 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX201 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX250
PolycomVVX250 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX300
PolycomVVX300 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX300 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX301
PolycomVVX301 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX301 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX310
PolycomVVX310 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX310 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX311
PolycomVVX311 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX311 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX400
PolycomVVX400 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX400 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX401
PolycomVVX401 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX401 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX410
PolycomVVX410 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX410 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX411
PolycomVVX411 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX411 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX450
PolycomVVX450 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX500
PolycomVVX500 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX500 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX501
PolycomVVX501 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX501 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX600
PolycomVVX600 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX600 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX601
PolycomVVX601 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX601 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
Cisco ATA 191
Yealink T42S
Yealink T46S
Yealink T53W
Yealink T57W
Yealink T41P
New action versions
- STARTNULLAPPLICATION.1.0.0
Included components
Modules
Resources
Actions
Version 4.16.8 - Early deployment
Release notes
- Bugfix: Wrong source IP in SDP for RTP binding in case of TLS (PC-832)
- Bugfix: SVE resource should be monitored (PC-875)
- Bugfix: Remove global SIP rtpbindaddr (TS-1199)(PC-832)
- Bugfix: dbmonitor logs fill disk space (PC-541)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
Database Schema
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 Show release notesHide release notes
- Feature: sort by summarized columns
Polycom Virtual Phone
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.7 - Early deployment
Release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.31.1 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in stringfields management (backport) (TS-12)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.6 - Early deployment
Release notes
- Bugfix: Fix rsync issue (MCH-489)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
SOP Base
SOP Base v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: HTTP AMI support (PC-314)
System Base
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.5 - Early deployment
Release notes
- Bugfix: Upgrade system base to remove irqbalance daemon install (PC-538)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.4 - Early deployment
Release notes
- Bugfix: Missing includes to required libraries (PC-598)
- Bugfix: Wrong name for some template resources (PC-598)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.3 - Early deployment
Release notes
- Bugfix: Upgrade SOP API module (PC-643)
- Bugfix: Incorrect RTP source IP with HA (TS-173)
- Bugfix: Restore IP331 resource template (TS-197)
- Bugfix: Disable additional codecs on VVX videophone (TS-178)
- Bugfix: Upgrade custom resources during template upgrade (PC-598)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
SIP Trunk
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.2 - Early deployment
Release notes
- Bugfix: Ensure escaux-devices-api is started (PC-524)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
- Application Management Server
- Application Management Server v.3.7.2 (intermediate version) Show release notesHide release notes
- Improvement: Greatly reduce load generated by defence daemon. (PC-100)
FAX Server
FAX Server v.2.8.0 (intermediate version) Show release notesHide release notes
- Improvement: removed resource intensive defence script (PC-109)
- Deprecated: restore missing directory for fax server users (TS-13)
Unified End Point Support
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.1 - Early deployment
Release notes
- Bugfix: Missing NotifyFormat parameter in Template-SipTrunk profile (TS-111)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.0 - Early deployment
Release notes
- Feature: Added template resources for VVX 250 & 450 (M25185)
- Feature: Added template resource for ReportCDR_Q (M0)
- Improvement: Migrate Z-Provisioning-SOA1 profile to legacy Template-SipTrunk (M22348)
- Improvement: Template upgrade support Fusion 4.5.0 (M20954)
- Improvement: Upgraded Polycom Support module to latest version 5.13.5 (M25185)
- Improvement: CIsco ATA firmware upgrade support (PC-60)
- Improvement: Set more permissive access-rights for some SOP profile parameters (M25613)
- Bugfix: align SOP language parameters (PC-130)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
ReportCDR_Q
Cisco SPA112
PolycomVVX250
PolycomVVX450
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.15.0 - Early deployment
Release notes
- Improvement: Adding the Home number in the FleetView (M0)
- Improvement: Removed default password from virtual phone (M0)
- Improvement: Support for pickup on a BLF key (M19406)
- Bugfix: upgraded modules to fix the prompt syncing issue (M19506)
- Improvement: Hook added in incoming call catcher + documentation (M19530)
- Bugfix: Added clients net.Console x700 and x900 (M20916)
- Feature: Added support for Gigaset N870 (M23220)
- Improvement: improved NL translations (M23783)
- Feature: Added support for Mitel 6867i (M24817)
- Bugfix: Prevent replication of corrupted astdb + sanity check (M24855)
- Improvement: (Dis|En)able one/all queue policy per user (M25122)
- Bugfix: net.Console removed from queue at apply changes (M25187)
- Bugfix: Don't mix Gosub and Macro (M25237)
- Bugfix: Use the correct soprep to detect callflows in SyncCDRDB (M25309)
- Bugfix: Upgrade Software Sources module to 1.3.2 (M25370)
- Bugfix: changed various profile rights for fleet users (M25437)
- Feature: upgrade Return action in user callflows (M25438)
- Bugfix: upgraded all CallDevices actions to 3.31.3 (M25505)
- Bugfix: Module fails on new clients because (id_rsa issue) (M25705)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Upgrade GoSub action to version 2.2.0+ |
Upgrade SMP app to version 5.12.0+ |
Changed components
Show changed componentsHide changed components
New module versions
Software sources v.1.3.0 (intermediate version) Show release notesHide release notes
- Feature: add a tool to retrieve apt sources
- Feature: support additional repositories with configuration files
- Improvement: don't install "Recommends" packages by default
- Bugfix: add missing updates repositories
- Bugfix: update sources on package upgrade
Cluster & SOP Active-Active Support
Cluster & SOP Active-Active Support v.4.0.3 (intermediate version) Show release notesHide release notes
- Bugfix: Allow upgrade of packages (M0)
Cluster & SOP Active-Active Support v.4.0.2 (intermediate version) Show release notesHide release notes
- Improvement: Sync file data when the daemon start (M22723) - link
- Bugfix: Avoid to delete file during lsyncd start (M22723) - link
Cluster & SOP Active-Active Support v.4.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Speed up the retry when the HTTP to other cluster fails (M22194) - link
- Bugfix: Avoid issue on vSOP start (M22194) - link
- Bugfix: Check if Asterisk Manager is running (M22194) - link
Cluster & SOP Active-Active Support v.4.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support file sync (M21530) - link
- Feature: Remove critical cron - use daemons (M19664) - link
- Feature: Fast retry in case of sync failure (M19664) - link
- Improvement: Remove forking in perl code (M19664) - link
- Improvement: Package split (M19664) (M21530) - link
Cluster & SOP Active-Active Support v.3.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Collect profile parameters list for all extensions (M22011) - link
Cluster & SOP Active-Active Support v.3.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow the status synchronisation (M21819) - link
- Bugfix: Don't sync if asterisk is not running (M21850) - link
Cluster & SOP Active-Active Support v.3.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Review sync of profile parameters (M20353) - link
Cluster & SOP Active-Active Support v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Add support for the third interface (M19687) - link
- Bugfix: Use interface configured in each the module for all sop in the cluster (M19687) - link
Communication Server
- Communication Server v.3.31.0 Show release notesHide release notes
- Feature: Force outgoing subscriptions refresh (M24751) - link
- Improvement: Filter duplicate presence callflow runs (M21224) - link
- Improvement: Activated extension pickup (M19406) - link
- Improvement: Check database integrity before startup (M24855) - link
- Improvement: Handle SQL escape character in dialplan function (M24367) - link
- Improvement: Don't respawn the process on normal exit status (M25017) - link
- Improvement: Set global flag of newly created endpoint abstraction resources (M25176) - link
- Bugfix: Exit when SIP TLS binding fails (M24590) - link
- Bugfix: Fix dependencies required by process-voicemail (M25021) - link
- Bugfix: Play date/time announcement in voicemail (M23149) - link
- Bugfix: Firewall support for TCP SIP (M24404) - link
- Bugfix: Crash in app_queue null CDR (M24750) - link
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.30.3 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in stringfields management (backport) (TS-12)
High Availability
Gigaset Phone Support
Mitel Phone Support
SSH Peer Connectivity
SSH Peer Connectivity v.1.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Incomplete known_hosts after cluster installation (M25598)
SSH Peer Connectivity v.1.3.0 (intermediate version) Show release notesHide release notes
- Improvement: Update known_hosts on each SOP during SOP re-installation (M22723)
- Bugfix: Avoid install error on .ssh directory (M22723)
New resource versions
- ReportCDR
- ReportCDR v.2.16.0 Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
- ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
net.Console X900
net.Console X700
net.Console X700 v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to annotate the call with extra informations (M13662)
GigasetN870IP
SyncCDRDB
PolycomIP6000
PolycomIP6000 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP550
PolycomIP550 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP670
PolycomIP670 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP650
PolycomIP650 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP560
PolycomIP560 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP331
PolycomIP331 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP450
PolycomIP450 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP7000
PolycomIP7000 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP335
PolycomIP335 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX500
PolycomVVX1500
PolycomVVX310
PolycomVVX310 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX400
PolycomVVX400 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX300
PolycomVVX300 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX410
PolycomVVX410 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX600
PolycomVVX101
PolycomVVX101 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX201
PolycomVVX201 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX301
PolycomVVX301 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX401
PolycomVVX401 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomVVX501
PolycomVVX601
PolycomVVX601 v.5.10.2 (intermediate version) Show release notesHide release notes
GigasetN870SAT
PolycomVVX311
PolycomVVX311 v.5.10.2 (intermediate version) Show release notesHide release notes
PolycomVVX411
PolycomVVX411 v.5.10.2 (intermediate version) Show release notesHide release notes
Polycom Virtual Phone
Polycom Virtual Phone v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Default password was always used (M0)
Unified End Point SIP peer
Unified End Point SIP peer v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Added contact group in parameters of the SDX6
- Feature: Add the option to accept incoming caller id
GigasetN510IP
GigasetN720IP
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.14.4 - Early deployment
Release notes
- Bugfix: net.Console removed from queue at apply changes (M25187)
- Bugfix: Update Application Management Server (PC-100)
- Bugfix: Update Fax Server (PC-109)
- Bugfix: VCS tool updated (M0)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
SOP API v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to set state for one/all queue policies of a user (M25122)
- Bugfix: Allow to unset a profile parameter (M0)
- Deprecated: Allow to set state for one/all queue policies of a user does not work (M25122)
SOP API v.5.9.4 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure queue policy reload exits if no response from asterisk (TS-200)
SOP API v.5.9.3 (intermediate version) Show release notesHide release notes
- Bugfix: Improve speed of 50-queue-policy-apply (TS-10)
SOP API v.5.9.2 (intermediate version) Show release notesHide release notes
- Bugfix: Expose for each extension, the supervised extensions. (backport) (TS-10)
- Bugfix: only expose penalty when set in policy (backport) (TS-11)
Application Management Server
FAX Server
New resource versions
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.14.3 - Deprecated
Release notes
- Bugfix: Upgrade mserver to fix defence performance (PC-100)
- Bugfix: Update fax server (PC-109)
- Deprecated: Wrong schema for queue resource template (M0)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.14.2 - Early deployment
Release notes
- Feature: Register IP Phone on UEP (M23243)
- Bugfix: Queue member lost after apply-change (M24889)
- Bugfix: Add CallerId for IVR (M22331)
- Bugfix: Dymamic profile not updated (M24076)
- Bugfix: Missing "SopRoutingRoute4Netmask" masks added back (M24440)
- Bugfix: Play date/time announcement in voicemail (M23149)
- Bugfix: Fixed phones reboot (M24266)
- Bugfix: Updated Gigaset firmware (M23641)
- Bugfix: Ensure dbGetCallflow generated correct JSON (M24199)
- Improvement: Allow a user to manage all QP (M24479)
- Improvement: Optimise queue policy APIs (M24156)
- Improvement: Disable monitoring via template (M23403)
- Improvement: corrected polycom firmware update scheduler documentation (M23915)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
- Polycom Phone Support
- Polycom Phone Support v.5.13.4 Show release notesHide release notes
- Bugfix: Local Admin password not set correctly on SOP (M24266)
- Bugfix: Phone reboot from SMP was not working (M24266)
System Base
- System Base v.2.6.1 Show release notesHide release notes
- Bugfix: It was not possible to change a dynamic provide by another one (M24076) - link
- Bugfix: Fixed errors generated by escaux-base during the apply changes (M24850) - link
Communication Server
Communication Server v.3.30.1 (intermediate version) Show release notesHide release notes
- Bugfix: Date/time announcement was not played in voicemail (M23149) - link
- Bugfix: Open firewall TCP connection on port 5060 (M24404) - link
Communication Server v.3.30.0 (intermediate version) Show release notesHide release notes
- Feature: Set presence from manager (M24128) - link
SOP API
SOP API v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Allow a user to manage the queue policies of all extensions (M24479) - link
- Deprecated: On apply-change members could be removed from queues (M24889) - link
SOP API v.5.8.0 (intermediate version) Show release notesHide release notes
- Feature: Add fusionGetQueue (M24366) - link
- Bugfix: Ensure dbGetCallflow generates valid JSON (M24199) - link
- Bugfix: Ensure callhistory generates valid JSON (M24199) - link
- Bugfix: When default QP is "login" the QP must be changed manually before status can manage it (M24350) - link
- Deprecated: On apply-change members could be removed from queues (M24889) - link
SOP API v.5.7.3 (intermediate version) Show release notesHide release notes
- Bugfix: When default QP is "login", the QP must be changed manually before status can manage it (M24350) - link
- Deprecated: Unused version (M0)
Database Schema
New resource versions
No new resource versions.
New action versions
STARTDYNAMICAPPLICATION.8.7.0
Included components
Modules
Resources
Actions
Version 4.14.1 - Deprecated
Release notes
- Bugfix: Fixed Polycom phone reload when firmware update scheduled (M23915)
- Bugfix: Switch back to free license for few profiles (M23903)
- Bugfix: Remove netDesktop dep for extra status (M23939)
- Bugfix: Queue member sync dependency (M22489)
- Bugfix: Pum broken (M23936)
- Bugfix: Disable MALLOC_DEBUG in CS release build (M23927)
- Bugfix: Disable monitoring via template (M23403)
- Improvement: Create service on APL domain by default (M23881)
- Improvement: Aligned softkeys config for all Polycom resources (M24079)
- Improvement: Add more sip parameters (M23243)
- Improvement: Updated user profile doc with new features (M23914)
- Improvement: Updated sop profile doc with new features (M23913)(M23915)
- Deprecated: On apply-change members could be removed from queues (M24889)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
Unified End Point Support
Unified End Point Support v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Improve performance during apply changes. Better usage of cache (M0)
Database Schema
Cisco ATA Support
SOP API
- SOP API v.5.7.2 Show release notesHide release notes
- Bugfix: Set user agent during the profile sync in active active mode (M23613) - link
- Bugfix: Ensure dbGetCallflow generates valid JSON (M24199) - link
- Bugfix: Ensure callhistory generates valid JSON (M24199) - link
- Deprecated: On apply-change members could be removed from queues (M24889) - link
Communication Server
PUM
- PUM v.3.6.0 Show release notesHide release notes
- Improvement: Converted to debian packaging (M23654)
- Bugfix: Fixed dependencies issues causing both login and logout to fail (M23936)
net.Console
Unified Communication Model
Polycom Phone Support
- Polycom Phone Support v.5.13.3 Show release notesHide release notes
- Improvement: make sure updated phone are properly rebooted (M23915)
- Improvement: updated polycom-drivers.deb version (M23915)
New resource versions
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.14.0 - Deprecated
Release notes
- Feature: Send RPID to UEP (M15151)
- Feature: Allow extension with dashes in SOP API (M21945)
- Feature: Allow to select MOH in Template-CallQueuer profile (M22733)
- Feature: Added HA email notification (M21893)
- Feature: Support Cisco ATA over Internet (M21483)
- Feature: Added fleet role for restricted user profile view (M22487)
- Feature: Add fleetmanager roles (M22785)
- Improvement: SOP API uses crypt hash in secure mode (M9471)
- Improvement: Set queue policy to Off (M22489)
- Improvement: Added phone reload in case of HA switchover (M22617)
- Improvement: HA CLI improvement (M22617)
- Improvement: Custom voicemail extension for IVR (M22833)
- Improvement: Clarify profile layout and help for IVR and CallQueuer profiles (M22833)
- Improvement: Added EMAIL field to ShortNumber fleet view (M22661)
- Improvement: Prevent minutely fork of ifconfig (M23110)
- Improvement: Support remaining Polycom SP IP phones over internet (M23171)
- Improvement: Department exposed in the Fleetmanager (M22531)
- Improvement: Set default value for raise penalty (M22177)
- Improvement: Expose Template-SOP in fleetmanager (M22785)
- Improvement: Keep allign Queue configuration in Fusion's user-profile and the queues' members (M22613)
- Improvement: Support labels for queue policies (M22495)
- Improvement: Set limit to 30 devices for Gigaset N720 Sat (M23057)
- Improvement: Upgrade to bugfix VVX firmware 5.9.2 (M23502)
- Bugfix: Fixed /tftpboot permissions (M4235)
- Bugfix: Fix profile license for Fuzer (M18232)
- Bugfix: Restore hook before status change (M21894)
- Bugfix: Prevent proxy.pl from listening on 5050 (M6835)
- Bugfix: Bypass authentication for PUM logout (M22858)
- Bugfix: Adapt authentication check in PUM callflow (M22858)
- Bugfix: No voice after unhold when srtp is enable for Polycom SP IP phones (M22965)
- Bugfix: UEP transfer support for Polycom (M20555)
- Bugfix: Polycom Local Directory was not allowed (M22314)
- Bugfix: CDR of calls to extension looking like a callflows id were dropped (M23230)
- Bugfix: Removed order from Gigaset N510/N720 (M23057)
- Bugfix: Net.Console failed to start when default route was set on eth1 (M22636)
- Bugfix: Fixed net.Console speeddials on Windows 10 (M23256)
- Bugfix: Zerofconf task was not working in some conditions (M23271)
- Bugfix: Disable access code for Gigaset phones (M23100)
- Bugfix: VoicemailExtension in CallQueuer is now optional (M22833)
- Bugfix: Ringall and all agents busy does not raise the selected penalty (M22177)
- Bugfix: Fix permissions on user roles (M22785)
- Bugfix: Fix layout issue in TemplateUser profile (M0)
- Bugfix: Video was not working in some conditions when SRTP was enabled (M22350)
- Bugfix: Call waiting broken for some actions (M23496)
- Bugfix: German prompts corrections (M23483)
- Deprecated: On apply-change members could be removed from queues (M24889)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
LDAP Synchronization
File Manager
File Manager v.2.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Package refactoring and apt installation (M16550) - link
File Manager v.1.5.0 (intermediate version) Show release notesHide release notes
- Bugfix: Correct path to credentials file for baseline >= 3.0.0 (M0)
- Feature: Added firewall rules file (M13989) - link
File Manager v.1.4.9 (intermediate version) Show release notesHide release notes
- Improvement: By default, WebDAV didn't include a link to the fileman/files/contacts. (M11966) - link
File Manager v.1.4.8 (intermediate version) Show release notesHide release notes
- Improvement: Expose DAV network captures directory (M11068)
- Improvement: Expose server logs through DAV (M0)
PUM
System Base
- System Base v.2.6.0 Show release notesHide release notes
- Feature: Reliable sopsync when profile parameter change (M22067) - link
- Improvement: Avoid forking processes every minute when verifying connection to the SMP (M23110) - link
- Bugfix: Remove duplicate package escaux-evaluate (M22617) - link
- Bugfix: Restored CGIRPC required by PUM and Cluster Sync (M23654) - link
System Base v.2.5.3 (intermediate version) Show release notesHide release notes
- Feature: Support monitoring of core dumps (MCH-29)
System Base v.2.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Could not publish SSH public key from CLI (M21889) - link
System Base v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: allow to reread configuration files by daemon processes. (M17451) - link
SOP Base
High Availability
- High Availability v.5.1.0 Show release notesHide release notes
- Improvement: Display remote machine status (M22617)
- Improvement: Propose db slaving when going to standby (M22617)
- Improvement: Command 'ha standby' now available in root (M22617)
- Feature: Added email notification (M21893)
net.Console
net.Console v.3.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: set default route on eth0 (M22636)
Communication Server
- Communication Server v.3.29.0 Show release notesHide release notes
- Feature: Default channel timeout (M22735) - link
- Feature: Unlimited custom HTTP headers from dialplan HASH (M23267) - link
- Improvement: Update libastphonenumber library (M23774) - link
- Bugfix: ringall and all agents busy does not raise the selected penalty (M22177) - link
- Bugfix: Possible deadlock during REFER (M23467) - link
- Deprecated: Memory tracking was left activated (M23927) - link
Communication Server v.3.28.1 (intermediate version) Show release notesHide release notes
- Improvement: Don't install regflag manager module when configuration is not set (M23395) - link
- Bugfix: Packaging issue (M23395) - link
Communication Server v.3.28.0 (intermediate version) Show release notesHide release notes
- Feature: Migrate MWI NOTIFY to callflow hook (M23255) - link
- Improvement: Support libSS7 version 2 (M16321) - link
- Improvement: Reliably sync the profile status and the register flag (M22644) - link
- Deprecated: Installation issue (M23395) - link
Communication Server v.3.27.3 (intermediate version) Show release notesHide release notes
- Bugfix: Allow SayUnixTime to say date only (M22653) - link
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (M2925) - link
- Bugfix: Reference leak on failed transfer prevents RTP port clearing (M23001) - link
- Bugfix: Remove odbc idle check causing crashes (M17872) - link
Communication Server v.3.27.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fix crash on MWI subscription start or stop after DNS update (M22408) - link
Communication Server v.3.27.1 (intermediate version) Show release notesHide release notes
- Bugfix: Preferred device causing queue to only call that one device until timeout (M22267) - link
- Bugfix: Avoid locking during quick SIPMute use (M22474) - link
- Improvement: Add SIPMute manager command for easier synchronous use (M22474) - link
Gigaset Phone Support
Gigaset Phone Support v.1.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed file permissions (M4235)
- Bugfix: Fixed order entries for Gigaset N720 IP/SAT and Gigaset (M23057)
- Bugfix: Removed unused configuration files (M23058)
- Bugfix: Disabled access code for VoIP lines (M23100)
- Improvement: Deactivated call forward on Gigaset N720 DM PRO (M20377)
SOP API
- SOP API v.5.7.1 Show release notesHide release notes
- Improvement: Keep in-line Queues configuration in Fusion's user profile and actual dynamic queue 's members (M22613) - link
- Deprecated: On apply-change members could be removed from queues (M24889) - link
SOP API v.5.7.0 (intermediate version) Show release notesHide release notes
- Improvement: Use crypt password for secure mode (M9471) - link
- Feature: Allow extension with dashes (M21945) - link
- Feature: Allow queue policy to be 'On' by default (M22489) - link
- Bugfix: Prevent proxy.pl from listening on 5050 (M6835) - link
- Deprecated: Queue members lost after apply-change (M22613) - link
SOP API v.5.6.1 (intermediate version) Show release notesHide release notes
- Improvement: Update attribute log when the status change and propagating timestamp is set (M22011) - link
- Bugfix: Avoid error when status constrains is not set (M22011) - link
- Bugfix: Syntax errors (M22011) - link
Sounds
Sounds v.2.1.3 (intermediate version) Show release notesHide release notes
- Bugfix: Sounds module does not download prompts (M20437)
Polycom Phone Support
- Polycom Phone Support v.5.13.2 Show release notesHide release notes
- Bugfix: Bump VVX firmware from 5.9.1 to 5.9.2 (M23502)
- Bugfix: USB port warning displayed when using PoE (M23502)
- Bugfix: Wrong call log dates with some NTP servers (M23502)
Polycom Phone Support v.5.13.1 (intermediate version) Show release notesHide release notes
- Bugfix: Auto reload configuration flag was not working (M23346)
Polycom Phone Support v.5.13.0 (intermediate version) Show release notesHide release notes
- Feature: Upgraded FW to 4.0.14 for SPIP and 5.9.1 for VVX (M22966)
Polycom Phone Support v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade firmware for internet support on all remaining SPIP (330,450,550,560,670) (M23140)
- Feature: Added phone reset command (M22982)
- Improvement: Use crypt password for authentication (M22401)
- Bugfix: Local directory download was restricted when using firmware upgrade schedule (M22314)
- Deprecated: Intermediate release never used in production; higher version to be used instead (M0)
New resource versions
- VSOP Memory Usage
- VSOP Memory Usage v.1.2.0 Show release notesHide release notes
- Bugfix: free ram displayed to be total-used, show total ram and swap (M8281)
- Improvement: Factorized common features from physical sops and virtual sops. (M8461)
PhoneZeroConf
Cisco SPA112
- Cisco SPA112 v.1.18.0 Show release notesHide release notes
- Feature: Centralized provisioning (M21451)
- Improvement: Add RTP range ID (M21483)
- Improvement: Removed default SIP password and made it configurable (M21483)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: SIP password field is now required, empty value not allowed (M21483)
PolycomIP450
- PolycomIP450 v.5.10.0 Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150)
- Feature: Allow to set a fifth softkey on every VVX (M22569)
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
- Improvement: Allow to adjust screen saver settings for every VVX (M23139)
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569)
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695)
PolycomIP335
- PolycomIP335 v.5.10.0 Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150)
- Feature: Allow to set a fifth softkey on every VVX (M22569)
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
- Improvement: Allow to adjust screen saver settings for every VVX (M23139)
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569)
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695)
PolycomIP550
- PolycomIP550 v.5.10.0 Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150)
- Feature: Allow to set a fifth softkey on every VVX (M22569)
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
- Improvement: Allow to adjust screen saver settings for every VVX (M23139)
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569)
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695)
PolycomIP670
- PolycomIP670 v.5.10.0 Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150)
- Feature: Allow to set a fifth softkey on every VVX (M22569)
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
- Improvement: Allow to adjust screen saver settings for every VVX (M23139)
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569)
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695)
PolycomIP560
- PolycomIP560 v.5.10.0 Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150)
- Feature: Allow to set a fifth softkey on every VVX (M22569)
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
- Improvement: Allow to adjust screen saver settings for every VVX (M23139)
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569)
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695)
GigasetN720IP
GigasetN720SAT
GigasetN510IP
Polycom Virtual Phone
SyncLDAP
- SyncLDAP v.2.0.2 Show release notesHide release notes
- Bugfix: Data from previous imported user, extension, ddi were copied to next entry when template are used (M23224)
- Bugfix: Import of new user was failing when a template user was configured (M23224)
- Deprecated: DDIs no synced any more (TS-277)
SyncCDRDB
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.13.3 - Early deployment
Release notes
- Bugfix: Update SSH Peer Connectivity module (M22039)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
- SSH Peer Connectivity
- SSH Peer Connectivity v.1.2.2 Show release notesHide release notes
- Bugfix: Fix race condition when modules are not installed simultaneously on all sops in the cluster on first installation. (M22250)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.13.2 - Early deployment
Release notes
- Bugfix: Custom presence state update was broken (M22693)
- Bugfix: Revert SSH Peer Connectivity installation (M22693)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.13.1 - Early deployment
Release notes
- Bugfix: Skip SSH Peer Connectivity installation (M22693)
- Bugfix: ETL evaluation in HA module was failing (M22693)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.13.0 - Early deployment
Release notes
- Feature: Added hook before status change (M21894)
- Feature: Added hookBeforeUserCallflow to User's callflow (M22186)
- Feature: Added QueuePreferredDevice hook variable (M22265)
- Feature: Support for queue subscriptions (M21131)
- Feature: Support personal queue policies (M21473)
- Feature: Support for penalty in queue policies (M21691)
- Feature: Queue Policy is now the default system (M21472)
- Feature: Allow to define department queue via the Queue Policy (M20424)
- Feature: Added support of Fusion as an UEP gateway (M20403)
- Feature: Added control of the primary and secondary phones by Connect Me (M21822)
- Feature: Added facilities to offer callback service (M19660)
- Feature: Allow to disable LLDP on polycom phones (M21839)
- Feature: Added Polycom VVX501 and Polycom VVX601 (M19732)
- Feature: Added high availability support (M21732) (M21072) (M21058)
- Improvement: Integrated Exim patch (M21865)
- Improvement: Login/out of LoggedQueues on status change (M19859)
- Improvement: Added prefix to caller id name in IVR (M18311)
- Improvement: Added IMRI Number parameter in SOP profile (M21695)
- Improvement: Added "allowForward" option in callQueuer (M19198)
- Improvement: Added mobile number in fleetmanager (M19221)
- Improvement: Added SOA password as profile parameter (M17525)
- Improvement: Updated display name in case of forward (M0)
- Improvement: Removed Queue profile (M0)
- Bugfix: PUM login and logout were no more possible (M22254)
- Bugfix: File synchronization between sops was not working (M21508)
- Bugfix: In case of CFU to external number, the original Caller ID was not displayed (M22217)
- Bugfix: Prompt different from destination extension's voicemail (M21828)
- Bugfix: Missing presence state if login never done (M21114)
- Bugfix: Phone status not updated in net.Console (M21758)
- Bugfix: net.Console failed to start (M21815)
- Bugfix: Incorrect default value for ringtones (M21938)
- Bugfix: Certificate Generator module install was failing on newly installed SOP (M22185)
- Bugfix: RTP ports were not freed after a call hang up (M17516) (M17777)
- Bugfix: Hidden number fails when RPID not set (M22005)
- Bugfix: FMU light was detected as an FMU call (M21760)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
- SSH Peer Connectivity
- SSH Peer Connectivity v.1.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Replace deprecated DSA algorithm with RSA. (M15528)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Upgrade on all SOP's in the cluster at the same time.
SSH Peer Connectivity v.1.1.0 (intermediate version) Show release notesHide release notes
- Bugfix: Peer connectivity was not working on VSOP (M16212)
Network
Network v.3.1.0 (intermediate version) Show release notesHide release notes
- Feature: Add unlimited number of route (M18543) - link
Network v.3.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: network interfaces sometimes don't come up when using bond interfaces on a vSOP host (M17981) - link
Network v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support for automatic failover to standby server (M0)
- Feature: Support active-standby link aggregation with bond interfaces (M11308) - link
Network v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to reconfigure the network without cutting the SMP Connection (M0)
High Availability
- High Availability v.5.0.0 Show release notesHide release notes
- Improvement: removed safetynet dependency (M21072)
- Bugfix: When switching to MASTER state, processes sometimes failed to start (M21072)
- Improvement: keepalived script was not compatible with keepalived role (M21072)
- Bugfix: astdb replication was not working (M21508)
Communication Server
- Communication Server v.3.27.0 Show release notesHide release notes
- Feature: Escaux presence format v2 (M21131) - link
- Feature: Make available more queue results in variables (M20710) - link
- Feature: Dual use of pidf and epresence JSON on the same extension (M21131) - link
- Bugfix: Abnormal circuit reset in case of in/out ISUP message collision (M21737) - link
- Bugfix: Deadlock on SS7 ACM reception (M22046) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Voxtron and net.Buzz extended presence support removed (M21131) - link
SOP API
SOP API v.5.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Syntax error (M21819) - link
- Bugfix: Avoid crash when status role mapping is not defined (M21819) - link
SOP API v.5.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix applying queue policy on secondary phone
SOP API v.5.5.0 (intermediate version) Show release notesHide release notes
- Feature: Add support to personal queue policy (M21473) - link
SOP API v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Support dbGetQueuePolicyToggle and ccQueuePolicyToggle (M20424) - link
SOP API v.5.3.2 (intermediate version) Show release notesHide release notes
- Improvement: Forward user agent during the cluster sync (M20616) - link
- Bugfix: Remove syntax error (M20353) - link
SOP API v.5.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Issue to get status permission (M20896) - link
SOP API v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: Support roles for status (M20012) - link
- Feature: Support permission with constraints on status (M20297) - link
- Improvement: Log errors when parsing contacts.csv (M20306) - link
SOP API v.5.2.0 (intermediate version) Show release notesHide release notes
- Feature: Provide a default value for the callback number (M0)
Unified End Point Support
Unified End Point Support v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Support SVE phones (M0)
Unified End Point Support v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Support phone on UEP (M20403)
Unified End Point Support v.2.1.1 (intermediate version) Show release notesHide release notes
- Feature: Provides a proxy to the UEP (M17285)
- Bugfix: Add missing parameter (M0)
Unified End Point Support v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Provides a proxy to the UEP (M17285)
- Deprecated: Missing parameter
Unified End Point Support v.2.0.3 (intermediate version) Show release notesHide release notes
- Deprecated: Not released (M0)
Unified End Point Support v.2.0.2 (intermediate version) Show release notesHide release notes
- Bugfix: Add defenses to avoid involuntary slot reset (M0)
Polycom Phone Support
Polycom Phone Support v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to disable LLDP (M21839)
- Deprecated: PUM login and logout were failing (M22254)
New resource versions
PhoneZeroConf
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.12.2 - Early deployment
Release notes
- Bugfix: Installation was failing on newly installed SOP (M22185)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.12.1 - Early deployment
Release notes
- Bugfix: net.Console failed to start (M21815)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
Restart mserver |
Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.12.0 - Deprecated
Release notes
- Feature: Added Office and Site in net.Console's directory (M21790)
- Feature: Add IMRI Number parameter in SOP profile (M21695)
- Feature: Update display name in case of forward (M0)
- Bugfix: Gigaset template resource were not master resources (M0)
- Bugfix: Incorrect default value for ringtones causing ring delay on Polycom phones (M21938)
- Bugfix: FMU light was detected as an FMU call (M21760)
- Bugfix: set "Mail Server" mode as "Secure" by default (M21865)
- Bugfix: Incorrect message played when Voicemail Extension is configured (M21828)
- Bugfix: Phone status sometimes not updated in net.Console (M21758)
- Bugfix: Certificate install issue (M21664) (M21665)
- Bugfix: Status cannot be displayed in the directory overview (M0)
- Bugfix: CFU disabled if no number (M20880)
- Bugfix: forward loop with fmu mobile (M22003)
- Bugfix: IVR voicemail - Incorrect prompt (M21782)
- Bugfix: Custom ring tones for queues (M21897)
- Bugfix: Caller ID method was not set in SIP Trunk (M22005)
- Deprecated: net.Console failed to start (M21815)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Mail Server
- Mail Server v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Disk space issue caused by local mailboxes (M14683)
- Bugfix: Force secure mode as default (M14683)
Mail Server v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12753)
Certificate Generator
- Certificate Generator v.1.0.1 Show release notesHide release notes
- Bugfix: Remove useless key conversion (M15528) - link
- Bugfix: Fix CRL generation when installing the module on 2 SOP's at the exact same time (M21665) - link
- Bugfix: Don't emit non-fatal errors (M21664) - link
Unified Communication Model
Unified Communication Model v.1.13.3 (intermediate version) Show release notesHide release notes
- Bugfix: Phone status incorrect because incorrect startup dependency (M21758)
Database Schema
Database Schema v.3.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Leave dbmonitor if a delete request fails when archiving (PC-541)
Database Schema v.3.5.0 (intermediate version) Show release notesHide release notes
- Feature: Add call id to call quality table (M21261)
Database Schema v.3.4.0 (intermediate version) Show release notesHide release notes
- Feature: Add call quality table (M20549)
Database Schema v.3.3.0 (intermediate version) Show release notesHide release notes
- Feature: Support roles for status (M19523)
net.Console
- net.Console v.3.10.0 Show release notesHide release notes
- Bugfix: Fixed JxBrowser error with url containing white spaces (M0)
- Feature: Added fields site/office to directory entry (M21790)
net.Console v.3.9.3 (intermediate version) Show release notesHide release notes
- Bugfix: Added support of foreign protocols in JxBrowser (M20916)
- Improvement: Updated JxBrowser to version 6.18 (M0)
New resource versions
Unified End Point SIP peer
Unified End Point SIP peer v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support transfer context (M20711) - link
Unified End Point SIP peer v.1.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: Really allow no authentication (M0)
GigasetN720IP
GigasetN510IP
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.11.0 - Early deployment
Release notes
- Feature: custom voicemail extension for CallQueuer (M20651)
- Feature: Latest versions of SyncCDRDB & ReportQDR (M21562)
- Feature: Added shortcodes for conflicting numbers (M21593)
- Feature: Room 8 added into Template-Conference (M21597)
- Feature: Fax server was not started (M21073)
- Improvement: customizable ringing time (M21379)
- Improvement: Removed unused entries in sop profile (M19846)
- Improvement: Allows to start hook when user answer call (M21396)
- Improvement: More infos shown in the FleetManager (M20887)
- Improvement: srtp for Polycom on Internet (M21197)
- Improvement: 99 speeddials filled in with LUA (M19674)
- Improvement: Disabled mwi and qualify on SDX6 (M0)
- Bugfix: Polycom on Internet reload + auto-reload (M17423)
- Bugfix: Incorrect config in case of pum login (M20283)
- Bugfix: Dynamic number shown in voicemail to email (M14849)
- Bugfix: Added D.PickUp SoftKey for every VVX phone (M21366)
- Bugfix: Incorrect DSCP values in Cisco ATA (M21105)
- Bugfix: Queue & IVR default prompts if not recorded (M21390)
- Bugfix: Fixed queue rule issue (M21060)
- Bugfix: Calling the mobile number of a colleague in private mode was not possible (M21364)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Restart of the Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
- Polycom Phone Support
- Polycom Phone Support v.5.10.0 Show release notesHide release notes
- Feature: Auto-reload of the configuration in case of configuration changes (M17423)
- Bugfix: Configuration reload when using SIPTLS was not working (M17423)
- Deprecated: PUM login and logout were failing (M22254)
- Polycom Phone Support v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade firmware for SPIP 670, 650 and 335 on Internet (M20669)
Communication Server
- Communication Server v.3.26.0 Show release notesHide release notes
- Improvement: Callflow after apply changes reload can now run for a longer time (M21408) - link
- Improvement: Added included directory for sip notify configuration (M17423) - link
- Improvement: Disable the defence during dialplan reload (M21518) - link
- Bugfix: Deadlock on SS7 call (M21370) - link
Communication Server v.3.25.0 (intermediate version) Show release notesHide release notes
- Feature: Added function MEMBER_QUEUE_LIST (M19859) - link
- Improvement: New commands to debug and monitor SIP subscriptions (M21115) - link
- Improvement: More hint and presencestate details shown (M21115) - link
- Improvement: Deactivate getpresence callflow during dialplan reload (M20411) - link
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Notify body could contain trailing line feed characters (M21114) - link
- Bugfix: Correctly forward return code from threadpool/taskprocessor (M21115) - link
- Bugfix: Do not outdate presencestate cache on first and last watcher (M21115) - link
- Bugfix: Avoid crash during the Escaux CDR driver load (M21124) - link
Communication Server v.3.24.0 (intermediate version) Show release notesHide release notes
- Feature: Added QUEUE_RAISE_PENALTY feature (M21060) - link
- Feature: Rules for ringall is now taken into account without expiry of the queue timeout (M21060) - link
- Bugfix: When parallel_retry was configured, higher penalty were also ringing (M21060) - link
New resource versions
- ReportQDR
- ReportQDR v.2.0.0 Show release notesHide release notes
- Improvement: Don't send report when empty (M19774)
- Improvement: Added SLA condition (M19498)
- Improvement: Added destination number for transferred call (M19947)
- Improvement: Added NOMEMBER result in summary/combined report (M20581)
- Improvement: Added first name + last name behind the destination number (M20643)
- Improvement: Implemented grand totals (M20705)
- ReportQDR v.1.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Would not generate 'Combined and Summary reports' if 'Summarized by...' has no value selected. (M11401)
- Bugfix: Character encoding issue for html output report (M12622)
- Bugfix: Column "Agent device owner" was missing in Combined and Summary reports (M17006)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB
- SyncCDRDB v.3.0.0 Show release notesHide release notes
- Feature: Synchronize queue log events (M19497)
- Improvement: Removed dependencies on attribute log and net.Supervisor (M20219)
- Improvement: Added first name + last name behind the destination number (M20643)
SyncCDRDB v.2.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: incorrect soprep was used to detect callflows (M25309)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: CDR of calls to extension looking like a callflows id were dropped (Backport) (M23230)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Cisco SPA8000
Cisco SPA112
QueueRule
PolycomIP6000
PolycomIP6000 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomIP650
PolycomIP650 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomIP331
PolycomIP331 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomIP7000
PolycomIP7000 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX500
PolycomVVX500 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX1500
PolycomVVX1500 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX310
PolycomVVX310 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX400
PolycomVVX400 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX300
PolycomVVX300 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX410
PolycomVVX410 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX600
PolycomVVX600 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX101
PolycomVVX101 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX201
PolycomVVX201 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX401
PolycomVVX401 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX411
PolycomVVX411 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX311
PolycomVVX311 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX601
PolycomVVX601 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX501
PolycomVVX501 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX301
PolycomVVX301 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.10.0 - Early deployment
Release notes
- Feature: Support worldwide dialplan (M19846)
- Feature: Allow to bind SIP TLS on eth1 (M20536)
- Bugfix: Removed dialplan parsing warning in logs (M20686)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Restart of the Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.23.0 Show release notesHide release notes
- Feature: Configurable bind addresses for SIP (M20536) - link
- Feature: Control of the sending of the 181 SIP message (M19306) - link
- Bugfix: Segfault when using NUM_INFO without all required arguments (M19846) - link
- Bugfix: JsonAdd/Set behavior on existing objects (M17879) - link
- Communication Server v.3.22.5 (intermediate version) Show release notesHide release notes
- Feature: New channels and uptime SOP CLI commands (backport) (M24628) (M25422) - link
Communication Server v.3.22.4 (intermediate version) Show release notesHide release notes
- Bugfix: Possible deadlock during REFER (backport) (M23467) - link
Communication Server v.3.22.3 (intermediate version) Show release notesHide release notes
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (backport) (M2925) - link
Communication Server v.3.22.2 (intermediate version) Show release notesHide release notes
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Fix crash on MWI subscription start or stop after DNS update (backport) (M22408) - link
- Bugfix: JsonAdd/Set behavior on existing objects (M17879) - link
Communication Server v.3.22.0 (intermediate version) Show release notesHide release notes
- Feature: Add library to format numbers (M15207) - link
- Feature: Synchronous REFER support (M16351) - link
- Bugfix: Fixed destination number on TRANSFER event in queue log (M19497) - link
Communication Server v.3.21.1 (intermediate version) Show release notesHide release notes
- Bugfix: res_json was leaking 2 bytes of return code (M17755) - link
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.9.0 - Early deployment
Release notes
- Feature: Added support for different ringtones between internal and external calls (M15829)
- Feature: Added support for Gigaset N510 and N720 base stations (M20657)
- Bugfix: Auto-negotiation of DTMF mode in SIP Trunk (M20598)
- Bugfix: Forward to external number fails when in private mode (M18777)
- Bugfix: Increased ATA first digit timeout (M20272)
- Bugfix: Quote were not accepted in LDAP search query (M18463)
- Bugfix: Duplicate CDRs in ReportCDR (M19908)
- Bugfix: Not able to listen to voicemail from inside net.Console (M19038)
- Bugfix: Not able to archive/delete voicemail in net.Console (M12858)
- Improvement: Allow calling emergency numbers with or without leading 0 (M19960)
- Improvement: Lowered SafetyNet dependency (M19667)
- Improvement: Load issue and symlink sync issue (M19656)
- Improvement: Fixed AllowForwardFromAgent (M19198)
- Improvement: Added support for Polycom IP6000 (M16844)
- Dependency:
- SMP Application v5.10.10 or higher
Special manual upgrade actions
Action |
Restart of the Communication Server |
Restart Application Management Server |
Changed components
Show changed componentsHide changed components
New module versions
- NTP server
- NTP server v.2.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Add firewall rule for NTP (M0)
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
NTP server v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Bugfix: There was a false error when installing on a vSOP (M12942) - link
Web Server
Web Server v.2.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure that the installation does not remove critical packages. (M0)
Web Server v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix contents of mpm.conf (M0)
Web Server v.2.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Monitor Nginx (M16948) - link
Web Server v.2.1.0 (intermediate version) Show release notesHide release notes
- Bugfix: Support for newer apache packages from upstream (M0)
- Feature: Limit number of websocket connection (M15728) - link
- Feature: Added the ability to configure the session lifetime (M15748) - link
Web Server v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: The web server configuration was broken when upgrading from a previous version (M14455) - link
Web Server v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Feature: Added parameter to set max number of clients (M13809) - link
- Improvement: Added web server related packages from Sop Base module (M12772) - link
- Deprecated: Breaks Web server configuration when upgrading from a previous version. (M14455) - link
Web Server v.1.6.2 (intermediate version) Show release notesHide release notes
- Bugfix: Upgrading apache on baseline 2 to fix CVE-2011-319 which could crash it (M17647) - link
Web Server v.1.6.1 (intermediate version) Show release notesHide release notes
- Improvement: RC4 and EXPORT Ciphers suite support disabled (M13063) - link
- Bugfix: An error was reported during installation when no actual error occurred (M12150) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Now you can chose between nginx or apache for the websockets (M11729) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.3 (intermediate version) Show release notesHide release notes
- Bugfix: No longer display non pertinent error on install (M0)
- Bugfix: Weak Ciphers disabled on the whole server (M0)
- Improvement: Defense to prevent the wrong configuration of the IP address (M12239) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: SSL weak ciphers disabled (M0)
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: HTTP, OpenSSL and PHP version type detection disabled. (M11658) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.0 (intermediate version) Show release notesHide release notes
- Bugfix: Increased connection limit (M11175) - link
- Bugfix: Poodle vulnerability fixed by disabling SSLv3 (M11215) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: The required certificate serial could sometimes be detected incorrectly (M10650)
- Feature: Enabling failover/loadbalancing capability
- Feature: Added the ability to authenticate users using SMP API via HTTP Basic Authentication (M10089)
- Improvement: Reload Apache after apply changes
- Feature: Make the timeout configurable (M10670)
- Feature: Added option to disable default site (M10940)
- Feature: HTTP Basic Authentication caching
- Deprecated: Vulnerable to CVE-2011-319 (M17647)
Web Server v.1.3.0 (intermediate version) Show release notesHide release notes
- Feature: Provide Websocket proxy
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.2.6 (intermediate version) Show release notesHide release notes
- Bugfix: Fix compatibility issue with SOP Base module (M23979) - link
SNMP Agent
SNMP Agent v.4.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: Update debian version for baseline 3 and checks (M0)
SNMP Agent v.4.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove asterisk manager trace file (M17507) - link
- Bugfix: Incorrect version of packages for HP hardware monitoring selected
SNMP Agent v.4.1.0 (intermediate version) Show release notesHide release notes
- Feature: Include finished calls passed during the last polling period in computation (M11435) - link
- Feature: Support of Dahdi Trunk (M9308) - link
- Feature: Support NodeJS api monitoring (M16185) - link
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: Rating oriented probe to check connectivity (M13333) - link
- Improvement: Rating oriented probe for monitoring daily rating (M13332) - link
- Improvement: Support internal error in dialogic dsi probe (M13812) - link
- Improvement: Improve dahdi probe for lua expression (M15598) - link
- Improvement: Improve sip probe for lua expression (M13970) - link
- Improvement: Generate Probe ID to support inheritance (M16035) - link
- Bugfix: Fix false positive errors when installed on vsop (M12943) - link
- Bugfix: Fixed error with dmidecode command on vsops (M0)
- Bugfix: Support DL360 G9 and DL20 on baseline 3 (M15310) - link
- Bugfix: Upgrade SNMP subsystem for HP hardware probes support (M15763) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
SNMP Agent v.4.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Feature: Add SNMP agents for monitoring HP hardware (M12556) - link
- Feature: Added probe to monitor SOP cluster syncronization (M112522) - link
- Improvement: SMPP queue monitoring (M11421) - link
- Bugfix: Stopping snmpd on the vSOP host was causing the stop of snmpd on all vSOPs (M9792) - link
SNMP Agent v.3.13.1 (intermediate version) Show release notesHide release notes
- Bugfix: Monitor SMSC connection (M18019) - link
SNMP Agent v.3.13.0 (intermediate version) Show release notesHide release notes
- Feature: Support NodeJS api monitoring (M16185) - link
- Improvement: Generate Probe ID to support inheritance (M16035) - link
- Bugfix: Support multiple range of channels in dahdi monitoring (M17043) - link
- Bugfix: HP DL20 Gen9 machine crashed when module was installed on baseline 2. Remove support for HP Gen9 hardware monitoring on baseline 2 (M17258) - link
- Bugfix: Remove asterisk manager trace file (M17507) - link
SNMP Agent v.3.12.5 (intermediate version) Show release notesHide release notes
- Bugfix: Upgrade package version (M0)
SNMP Agent v.3.12.4 (intermediate version) Show release notesHide release notes
- Bugfix: Remove asterisk manager trace file (M17507)
- Deprecated: Wrong package installed (M0)
Cluster & SOP Active-Active Support
Cluster & SOP Active-Active Support v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Filemanager could not access some of the prompts (M18867) - link
Database Server
Database Server v.4.2.0 (intermediate version) Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
Database Server v.4.1.1 (intermediate version) Show release notesHide release notes
- Deprecated: Debugging version.
Database Server v.4.1.0 (intermediate version) Show release notesHide release notes
- Bugfix: ODBC only allowed a single query at the time. (M14911) - link
Database Server v.4.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Bugfix: Grants to write instant messages into the database were not written until tables were present (M0013589) - link
Database Server v.3.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Enable FLAG_AUTO_RECONNECT option for LDAP dsn (M0004038)
- Deprecated: Not intended for production (M0)
Watchdog
Watchdog v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: Code refactoring (M16555) - link
- Improvement: Converted to APT (M16555) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
Watchdog v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Bugfix: default values could be incorrect when upgrading from a previous version and new options are available.(M10261) - link
System Base
Polycom Phone Support
Database Schema
Database Schema v.3.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Installation failed when db replication was activated (M19856)
Database Schema v.3.2.0 (intermediate version) Show release notesHide release notes
- Feature: Possibility to optimize the tables (M10409)
- Feature: Possibility to cleanup archived files (M10409)
- Improvement: Add index on scr column in the cdr table (M10292)
- Bugfix: SOP-SMP DB synchronization could fail (M16953)
- Improvement: Ensure that sop and cdrdb tables are created with latin1 encoding (M18407)
- Bugfix: Do not attempt to upgrade the database when it is not writable (M0018408)
Database Schema v.3.1.1 (intermediate version) Show release notesHide release notes
- Improvement: Add custom CDR fields (usertag and usernote) (M13662)
Database Schema v.3.1.0 (intermediate version) Show release notesHide release notes
- Improvement: added columns needed for the rating of premium (M13999) - link
- Bugfix: Decrease apply changes duration (M14120) - link
Database Schema v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Feature: Add some rating column in cdrdb.cdr (M12882)(M13353)(M13319) - link
- Improvement: Better cache serialization of data (M13856) - link
Database Schema v.2.10.3 (intermediate version) Show release notesHide release notes
- Improvement: Added index on CDR's uniqueid (backport) (M19908)
Call Management
- Call Management v.1.8.6 Show release notesHide release notes
- Bugfix: Listen to voicemail from inside net.Console was not working (M19038)
- Bugfix: Incorrect transfer destination was published in queue_log (M19497)
VMXML
net.Console
LDAP Server
LDAP Server v.1.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Remove dependency on safetynet (M19656)
LDAP Server v.1.7.4 (intermediate version) Show release notesHide release notes
- Bugfix: Quote were not accepted in search query (Backport) (M18463)
LDAP Server v.1.7.3 (intermediate version) Show release notesHide release notes
- Bugfix: The module installation was raising raising false errors. (M14173)
Gigaset Phone Support
- Gigaset Phone Support v.1.2.0 Show release notesHide release notes
- Bugfix: False positive message (M0)
- Feature: Reboot support for Gigaset N510 IP PRO and Gigaset N720 DM PRO (M20496)
- Improvement: Activated LDAP directory (M20373)
- Improvement: Activated mailbox (M20374)
- Improvement: Suppressed Voip wizard (M20376)
New resource versions
- PolycomIP6000
- PolycomIP6000 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
GigasetN720IP
GigasetN720SAT
SyncCDRDB
- SyncCDRDB v.2.5.0 Show release notesHide release notes
- Bugfix: Some call could have two CDRs (M19908)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Cisco SPA112
Cisco SPA112 v.1.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support Calls over Internet (M16268)
Cisco SPA112 v.1.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Set Three Way Call Serv to no by default (M15031)
- Bugfix: Lua expresiiion were not allowed in the dialplan (M15606)
Cisco SPA8000
SIP Trunk
SIP Trunk v.2.5.0 (intermediate version) Show release notesHide release notes
- Feature: Activation of the SIP TLS
GigasetN510IP
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.8.1 - Early deployment
Release notes
- Bugfix: Fix dependency issues on apache packages (M20311)
- Bugfix: Add default UEP feature set in sop.config (M20248)
- Dependency:
- SMP Application v5.10.10 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- SOP Base
- SOP Base v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365)
- Improvement: Moved all web related packages in Web Server module. (M12772)
- Improvement: Added escaux-evaluate package from System Base module (M0)
- Bugfix: Add missing dependencies (M14560)
SOP Base v.1.9.2 (intermediate version) Show release notesHide release notes
- Bugfix: Compatibility issue with Web Server module (M0)
SOP Base v.1.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: Added missing dependencies (M14560)
SOP Base v.1.9.0 (intermediate version) Show release notesHide release notes
- Improvement: Daemonized updatephone.php & push_phone.pl (M9887)
- Deprecated: Missing dependencies (M14560)
SOP Base v.1.8.5 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed dependency issue when using baseline 2.6 (M23979)
- Bugfix: There was compatibility issue with the WebServer module (M23979)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.8.0 - Early deployment
Release notes
- Feature: Added support for Polycom VVX501 and VVX601 (M16527)
- Feature: Activate Polycom HTTP provisioning (M18513)
- Feature: Added support for HTTP provisioning in zeroconf task (M19078)
- Feature: Polycom Firmware upgrade scheduling (M18513)
- Feature: Added SipTrunk profile (M18261)
- Feature: Added support for SDX6 feature set in User profile (M18695)
- Improvement: Ensure unique mac address for SDX6 resources (M19673)
- Improvement: Use pincode from User profile for PUM login (M19274)
- Improvement: Caller ID added in fax2email subject (M16958)
- Improvement: Added prefix to Caller ID in IVR (M18311)
- Improvement: Preserve Called ID in OutgoingCallCatcher (M18886)
- Improvement: Added "allowForward" option in template CallQueuer (M19198)
- Improvement: Missing internet phone config added to template resources (M19394)
- Improvement: Added mobile number in FleetManager (M19221)
- Improvement: SIP keepalive for Polycom phones (M19716)
- Bugfix: Forward was not working for IVR-Absent (M17168)
- Bugfix: Fixed FMU call check in callflow (M19004)
- Bugfix: Call pickup blocking net.Console transfer (M19339)
- Bugfix: Invalid phone status in net.Console (M18823)
- Bugfix: Outbound sip trunk registration never sent on Fusion (M19154)
- Bugfix: Broken PUM login/logout (M19273)
- Bugfix: IP address of phones not displayed correctly in dbGetDirectoryInfo (M18937)
- Bugfix: Forward to external number fails when in private mode the PBX (M18777)
- Bugfix: Net.Console blocked if BlindTransfer & NoRinging/Answer received (M4078)
- Bugfix: Queue parameters not inherited from master (M0)
- Bugfix: Fixed phone IPs in dbGetDirectoryInfo (M0)
- Dependency:
- SMP Application v5.10.10 or higher
Special manual upgrade actions
Action |
Restart of the Communication Server |
Restart of the Application Management Server |
Reboot of all the Polycom VVX |
Changed components
Show changed componentsHide changed components
New module versions
- Web Server
- Web Server v.1.2.4 (intermediate version) Show release notesHide release notes
- Bugfix: the required certificate serial could sometimes be detected incorrectly (M10650) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Polycom Phone Support
- Polycom Phone Support v.5.8.0 Show release notesHide release notes
- Feature: Added ability to limit simultaneous downloads (M18512)
- Feature: Added support of zeroconf when HTTP provisioning is used (M19078)
Polycom Phone Support v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: Support Polycom VVX501 and VVX601 (M16527)
- Feature: Added the ability to define firmware upgrade schedule (M18512)
System Base
- System Base v.2.4.0 Show release notesHide release notes
- Bugfix: SSH connection - Be more tolerant against network failures (M18135) - link
- Bugfix: SSH connection - Try authentication with ECDSA and DSA key
- Bugfix: Cluster synchronization broke prompt symlinks (M18867) - link
- Improvement: Remove unused daemon process that caused memory issues (M19120) - link
- Feature: Added local tasks support (M18513) - link
System Base v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove unused packages causing network to restart slowly
- Deprecated: Unused daemon process was causing high memory usage (M19120) - link
DHCP Server
DHCP Server v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Topic Senior IP phone provisioning was not always working (M18199) - link
Call Management
Call Management v.1.8.4 (intermediate version) Show release notesHide release notes
- Bugfix: Outgoing calls towards an invalid number would create hanging calls (M18823)
SOP API
SOP API v.5.0.3 (intermediate version) Show release notesHide release notes
- Bugfix: Fix phone IP indication when in cluster (M0018937) - link
- Bugfix: Missing remote_chanel in attribute log when call coming from a queue (M17934) - link
- Bugfix: Update dependencies (M0)
Communication Server
- Communication Server v.3.21.0 Show release notesHide release notes
- Improvement: Allow "force mode" on Escaux CDR driver (M18714) - link
- Improvement: Remove defence daemon dependency on safetynet (M19502) - link
- Bugfix: Sometimes fails to start automatically on a new install (M19534) - link
- Bugfix: Outbound registrations were deactivated by default (M19154) - link
- Bugfix: AutoMute could prevent channel deletion (M19621) - link
- Bugfix: Correct version of libss7 (M19615) - link
Communication Server v.3.20.0 (intermediate version) Show release notesHide release notes
- Feature: Allow other packages to include dialplan configuration (M18096) - link
- Bugfix: Permissions on spool directory needed a second install to be correct (M19267) - link
- Bugfix: Incorrect digest response in the Proxy-Authentication header of the REFER message (M19412) - link
Communication Server v.3.19.2 (intermediate version) Show release notesHide release notes
- Bugfix: Permissions on spool directory needed a second install to be correct (backport) (M19267) - link
Communication Server v.3.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Removed leftover ~dev in package version
Communication Server v.3.19.0 (intermediate version) Show release notesHide release notes
- Feature: SS7 - Open media on ACM (M18205) - link
- Feature: SS7 - Make Called Party Status Indicator configurable (M18205) - link
- Feature: Add Escaux CDR driver (M18701) - link
- Improvement: Debconf system more reliable (M17929) - link
- Improvement: In ringall strategy ring members as soon as they are available (M18271) - link
- Improvement: Make voicemail-cleanup configurable (M18090) - link
- Improvement: Support custom HTTP methods in func_curl (M18044) - link
- Bugfix: Expires of a Subscribe response was ignored (M18825) - link
- Deprecated: Not installable because of leftover ~dev
Communication Server v.3.18.4 (intermediate version) Show release notesHide release notes
- Bugfix: res_json was leaking 2 bytes of return code (backport) (M17755) - link
Communication Server v.3.18.3 (intermediate version) Show release notesHide release notes
- Bugfix: Expires of a Subscribe response was ignored (M18825) - link
net.Console
PUM
New resource versions
- SyncCDRDB
- SyncCDRDB v.2.4.3 Show release notesHide release notes
- Bugfix: Disposition was not always correct (M18722)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
- SyncCDRDB v.2.4.2 (intermediate version) Show release notesHide release notes
- Bugfix: Filter escauccapi calls out of reports
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove comment from sync code(M0)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: Caller number change was not taken into account (M13837)
- Feature: Add custom CDR fields "usertag" and "usernote" (M13662)
- Deprecated: Broken sync code (M0)
PolycomUpgrade
PolycomIP331
- PolycomIP331 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomIP331 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP650
- PolycomIP650 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomIP650 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP7000
- PolycomIP7000 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomIP7000 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX101
- PolycomVVX101 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX101 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX1500
- PolycomVVX1500 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX1500 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX201
- PolycomVVX201 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX201 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX300
- PolycomVVX300 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX300 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX301
- PolycomVVX301 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX301 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX310
- PolycomVVX310 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX310 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX311
- PolycomVVX311 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX311 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX400
- PolycomVVX400 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX400 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX401
- PolycomVVX401 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX401 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX410
- PolycomVVX410 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX410 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX411
- PolycomVVX411 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX411 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX500
- PolycomVVX500 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX500 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX501
- PolycomVVX501 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX600
- PolycomVVX600 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX600 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX601
- PolycomVVX601 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PhoneZeroConf
PhoneZeroConf v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Support Polycom VVX501 and VVX601 (M16527)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.7.1 - Early deployment
Release notes
- Bugfix: Removed unsupported net.Console X.900 (M18239)
- Bugfix: Profile licenses were not correct (M18239)
- Bugfix: Voicemail were deleted by the apply-change (M18090)
- Bugfix: Status change from VVX were not working (M17415)
- Bugfix: The Directory softkey should not be visible on a Polycom phone (M18395)
- Bugfix: Password for shell access were not set (M17628)
- Bugfix: Profile parameters were not synced properly (M18546)
- Bugfix: Some profile parameter for the profile BasicDevice were missing (M18336)
- Bugfix: Reboot was needed to change the speeddials on Polycom (M17786)
- Bugfix: Status was not visible in the fleet manager (M16701)
- Bugfix: Changing admin password with recovery user (M16945)
- Bugfix: Music on Hold were not reloaded after an apply change (M18461)
- Bugfix: Click2Dial from Connect Me on a Active-Standby Fusion was not working (M16978)
- Bugfix: PUM could fail in a cluster (M16121)
- Bugfix: The presence callflow was triggered too often (M17545)
- Bugfix: Wav files were not attached email notifying new voicemail (M16786)
- Bugfix: Removed first and last name for DDI in the fleet manager view (M16701)
- Bugfix: Doc for queue rules was missing (M16973)
- Bugfix: Voicemail introduction prompts were missing in some languages (M18299)
- Bugfix: In case of blind transfer from net.Console call were not leaving the supervision area when in Voicmail (M17236)
- Bugfix: The embedded browser of net.Console was too old (M12764)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Restart of the Communication Server |
Restart of the Application Management Server |
Reboot of all the Polycom VVX |
Changed components
Show changed componentsHide changed components
New module versions
- Cluster & SOP Active-Active Support
- Cluster & SOP Active-Active Support v.2.0.0 Show release notesHide release notes
- Improvement: Packaging refactoring (M16552) - link
- Improvement: Converting to APT (M16552) - link
- Bugfix: Synchronization issue when an extension is removed (M16713) - link
- Cluster & SOP Active-Active Support v.1.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: Filemanager could not access some of the prompts (M18867) - link
Cluster & SOP Active-Active Support v.1.10.0 (intermediate version) Show release notesHide release notes
- Feature: Support of unlimited parameter size for speeddials (M14143) - link
- Feature: Added firewall rules (M13989) - link
- Bugfix: Synchronization issue when an extension is removed (M16713) - link
- Bugfix: Fixed profile synchronization issue (M14595) - link
Cluster & SOP Active-Active Support v.1.9.0 (intermediate version) Show release notesHide release notes
- Feature: Added error handling for the Cluster Synchronization probe (M11252) - link
- Improvement: Profile synchronization script could fetch too many extensions (M11252) - link
- Improvement: Launch status update callflow configured in SOP API (M13509) - link
- Bugfix: Profile synchronization was no more working with the new profile parameter set (M14102) - link
SOP API
- SOP API v.5.0.2 Show release notesHide release notes
- Bugfix: Display local IP for standalone sops or extensions with multiple sop even when cluster.ini is present (M16978) - link
- Bugfix: Display error when parsing invalid CSV file (M0)
- Bugfix: Compatibility with escaux user (M16876) - link
SOP API v.5.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix installation when older api version is installed on the machine (M0)
- Bugfix: Compatibility with escaux user (M16876) - link
SOP API v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to trigger a callflow when a parameter is changed (M14034) - link
- Feature: Add User Agent in dbSetProfile callback (M15755) - link
- Improvement: Re-introduce wildcards option (M15755) - link
- Improvement: Modular design and APT support (M0)
- Bugfix: No BillSec after ccOriginate on Local channels (M15952) - link
- Bugfix: No CalledNumber after ccOriginate on Local channels (M16422) - link
- Bugfix: Compatibility with escaux user (M16876) - link
SOP API v.4.19.0 (intermediate version) Show release notesHide release notes
- Feature: Allowing AdminVAR modification when request comes from local IP (M17391) - link
SOP API v.4.18.0 (intermediate version) Show release notesHide release notes
- Feature: Add User Agent in dbSetProfile callback (M15755) - link
- Improvement: Re-introduce wildcards option (M15755) - link
- Bugfix: No BillSec after ccOriginate on Local channels (M15952) - link
- Bugfix: No CalledNumber after ccOriginate on Local channels (M16422) - link
- Deprecated: Not compatible with escaux user (M16876) - link
PUM
net.Console
- net.Console v.3.9.0 Show release notesHide release notes
- Feature: Updated embedded browser with Chromium 55 (M12764)
- Feature: Updated Java runtime environement to Java 1.8.0_121 (M17541)
- Bugfix: Fixed call blind transferred to a voicemail not leaving the supervision area (M17236)
Shell
- Shell v.2.1.1 Show release notesHide release notes
- Bugfix: Using recovery user to modify admin password was not working (M16945) - link
- Bugfix: The password hashes for users of the filemanager were never set properly (M17628) - link
Shell v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: The default interface for the admin user is now the Escaux CLI instead of the SOP shell (M16256) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade other modules too. The module documentation lists special upgrade actions for this version (M14774) - link
Shell v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
Shell v.1.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Using recovery user to modify admin password was not working - backport (M16945)
- Bugfix: The password hashes for users of the filemanager were never set properly - backport (M17628)
Polycom Phone Support
- Polycom Phone Support v.5.6.1 Show release notesHide release notes
- Bugfix: Status page was not accessible when the HTTP provisioning was activated (M17415) - link
- Bugfix: Speedials not updated on configuration reload (M18373) - link
Sounds
Sounds v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix french "Calendar" prompt (M0)
Sounds v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Add additional Statuses (M17919)
Sounds v.2.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Conversion to Apt (M16553)
Sounds v.1.14.0 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect voicemail introduction prompts (backport) (M18299)
Sounds v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Allow empty SOP directory field (M15782)
Sounds v.1.12.0 (intermediate version) Show release notesHide release notes
- Bugfix: Missing prompts added for Unavailable and Busy greetings (M13713)
Sounds v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Add English 'Corporate Mode Is Unavailable' Prompt (M0013819)
- Feature: New voicemail prompts added for en/fr/nl (M0013713)
- Improvement: Don't raise an error when the prompt directory is not found in SMP (M15589)
Communication Server
Unified Communication Model
New resource versions
Queue v.3.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow analogue ZDA devices registered in the queue to be called. (M11037)
Polycom Virtual Phone
PolycomIP331
PolycomIP650
PolycomIP650 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP7000
PolycomVVX500
PolycomVVX1500
PolycomVVX310
PolycomVVX400
PolycomVVX300
PolycomVVX410
PolycomVVX600
PolycomVVX101
PolycomVVX201
PolycomVVX301
PolycomVVX401
PolycomVVX411
PolycomVVX311
New action versions
- STARTDYNAMICAPPLICATION.8.4.3
Included components
Modules
Resources
Actions
Version 4.7.0 - Early deployment
Release notes
- Feature: Support of Polycom IP7000 over internet (M15791)
- Feature: Support of Polycom VVX 4xx for net.Console (M16490)
- Feature: Render SDX6 resource compatible with automatic provisioning (M17972)
- Feature: Render SDX6 resource compatible with instant messaging for UEP (M17348)
- Feature: Peer-specific RTP port range (M16702)
- Feature: Added possibility to configure a hook for queue connected (M17231)
- Feature: Added queue rules (M16973)
- Improvement: Added national prefix to called numbers (M17612)
- Improvement: Make group pickup work again (M17494)
- Improvement: Corrected SVE resource default values (M16977)
- Improvement: Presence and incoming call for UEP trunk (M15507)
- Improvement: Better support of database restarts for WebRTC (M18125)
- Bugfix: Missing option in voicemail menu (M17602)
- Bugfix: MWI light stays on (M17895)
- Bugfix: RTP ports were not freed after connectivity loss while ringing (M17777)
- Bugfix: SOA password in internal directory (M17525)
- Bugfix: Country code 44 conflict with shortcodes (M18134)
- Bugfix: net.Console timeout when putting onhold (M18116)
- Bugfix: Disabled status change URL for VVX101 (M17939)
- Bugfix: Permissions on sudoers file are incorrect (M18245)
- Bugfix: Added 30min ring time in CallQueuer (M17938)
- Bugfix: Too short timetout for OutgoingCallCatcher (M17426)
- Bugfix: Allow disabling DHCP server (M17924)
- Bugfix: Unexpected auto-answer (M16620)
- Bugfix: Ensure the provisioning task is created (M0)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Restart of the Communication Server |
Restart of the Application Management Server |
Reboot of all the Polycom VVX |
Changed components
Show changed componentsHide changed components
New module versions
Call Management
Communication Server
Communication Server v.3.18.0 (intermediate version) Show release notesHide release notes
- Feature: Launch callflow after apply changes (M17007) - link
- Feature: New commands in SOP CLI (M14976) - link
- Improvement: EndPointAbstraction do not register at creation (M17007) - link
- Improvement: Added Connected Line Update in Intrude application (M17901) - link
- Bugfix: Protect against potential crashes in res_json (M17879) - link
- Deprecated: Installation on clean machine fails (M17929) - link
Communication Server v.3.17.2 (intermediate version) Show release notesHide release notes
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (backport) (M2925) - link
Communication Server v.3.17.1 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure installation on clean machine works (M17929) - link
Communication Server v.3.17.0 (intermediate version) Show release notesHide release notes
- Feature: SIP peer-specific RTP port range (M16702) - link
- Improvement: Continuous log rotation (M12330) - link
- Improvement: Review mapping ISUP cause - SIP error (M17466) - link
- Improvement: Make virtual extensions and presence state timeout configurable (M17545) - link
- Bugfix: RTP ports were not freed after connectivity loss while ringing (M17516) - link
- Bugfix: REINVITE with codec rordering were not propagated (M17405) - link
- Bugfix: SIP message body starting with spaces could be lost (M15422) - link
- Bugfix: Restored automatic start on first installation (M12330) - link
- Deprecated: Installation on clean machine fails (M17929) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Start/Stop and process monitoring changed - see admin guide (M12330) - link
Communication Server v.3.16.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M16491) - link
- Improvement: Define multiple range of CICS (M17043) - link
- Improvement: Debconf template format support
- Improvement: Immediate restart after crash (M17031) - link
- Bugfix: Avoid safetynet false positive (M17031) - link
- Bugfix: Conf bridge announcements not played in the user's language (M16253) - link
- Bugfix: T38 was only working on eth0 (M16616) - link
- Bugfix: Process crashed in case of ccOriginate API call (M16768) - link
- Bugfix: Custom unavailable minivm greeting was never played (M16855) - link
- Bugfix: The recorded name was not used when the option skip fallback was used (M16855) - link
- Bugfix: Correctly authenticate outgoing instant messages (M17348) - link
- Bugfix: Crash when handling codec's payloads (M16969) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: SMP and template must have apt support (M16491) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Start/Stop and process monitoring changed - see admin guide (M17031) - link
- Deprecated: Better upgrade process in 3.17.0 (M17031) - link
Communication Server v.3.15.6001 (intermediate version) Show release notesHide release notes
- Bugfix: Voicemail were deleted after an apply-change (M18090) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.12 (intermediate version) Show release notesHide release notes
- Bugfix: Remove odbc idle check causing crashes (backport) (M17872) - link
- Deprecated: Never deployed in production
Communication Server v.3.15.11 (intermediate version) Show release notesHide release notes
- Bugfix: Deadlock on SS7 ACM reception (M22046) - link
- Limitation: Restricted to Tele2 FMU and Fuzer CDG (M0)
Communication Server v.3.15.10 (intermediate version) Show release notesHide release notes
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Deadlock when making ISUP call (M21370) - link
- Bugfix: Avoid SS7 CIC dual seizure (M21737) - link
- Limitation: Restricted to Tele2 FMU and Fuzer CDG (M0)
- Deprecated: Deadlock still possible (M22046) - link
Communication Server v.3.15.9 (intermediate version) Show release notesHide release notes
- Improvement: SS7 - Open media on ACM (backport) (M18205) - link
- Improvement: SS7 - Enable/disable the support of the Called party's status indicator (backport) (M18205) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.8 (intermediate version) Show release notesHide release notes
- Improvement: Added Connected Line Update in Intrude application (backport) (M17901) - link
- Deprecated: Higher version provide significant improvements (M0)
New resource versions
Unified End Point SIP peer
PolycomVVX500
- PolycomVVX500 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP331
- PolycomIP331 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP7000
- PolycomIP7000 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791) - link
- Feature: SIP peer-specific RTP port range (M16702) - link
- Bugfix: Push feature was not working on VVX410 (M16490) - link
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950) - link
PolycomVVX101
- PolycomVVX101 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX1500
- PolycomVVX1500 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX201
- PolycomVVX201 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX300
- PolycomVVX300 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX301
- PolycomVVX301 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX310
- PolycomVVX310 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX311
- PolycomVVX311 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX400
- PolycomVVX400 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX401
- PolycomVVX401 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX410
- PolycomVVX410 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX411
- PolycomVVX411 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX600
- PolycomVVX600 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.6.3 - Early deployment
Release notes
- Bugfix: On new installation it was not possible to record voicemail (M18056)
- Bugfix: Context changes after template upgrade (M17453)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Restart of the Communication Server |
Restart of the Application Management Server |
Reboot of all the Polycom VVX |
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.6.2 - Early deployment
Release notes
- Bugfix: SOA password in internal directory (M17525)
- Bugfix: RTP ports were not freed after connectivity loss while ringing (M17516)
- Bugfix: Upgrade version of net.Console to prevent installation errors (M17923)
- Bugfix: Allow disabling DHCP server (M17924)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Action |
Restart of the Communication Server |
Restart of the Application Management Server |
Reboot of all the Polycom VVX |
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions