SetRingTone
Description (v1.22.0)
This application sets the bellcore ring tone which will be used by called IP phones..
Bellcore ring type number: [ring_tone]
Release notes
Version 1.22.0 - General deployment
- Feature: Added the possibility to remove the Alert-Info header
Version 1.21.3 - General deployment
- Bugfix: The Alert-info header was incorrect due to a missing <.
Version 1.21.2 - General deployment
- Bugfix: New Alert-info header was not taken into account. (M0005309)
Version 1.21.1 - Deprecated
- Bugfix: New Alert-info header was not taken into account. (M0005309)
- Deprecated: Alert-info header is not functional on asterisk 1.2
- Deprecated: Dialplan priority conflict
Version 1.21.0 - Early deployment
- Improvement: Compatibility with the Communication Server module
Version 1.20 - General deployment
- Improvement: ComboBox to select the variable
- Improvement: Alert-Info must be an an absolute URL as described in RFC3261 which is now stricly checked by the Polycom firmware 4.0.0 and higher
Version 1.10 - General deployment
- Feature: Support up to 3 grandstream GXP2000 ringtones (Resource version 2.3 and Granstream support module 1.3 required)
Version 1.3.1 - Deprecated
- Bugfix: New Alert-info header was not taken into account. (M0005309)
- Deprecated: Bad version numbering.
Version 1.3 - Deprecated
- Improvement: Compatibility with the Communication Server module.
- Deprecated: Bad version numbering.
Version 1.00 - General deployment
Action parameters
- Ring Tone: This parameter requires the selection of a predefined parameter. The parameter value must be an integer. The available ringtones depend on the phone brand. See below. From version 2.22, if set to blank, the previously set ring tone is cancelled
Phone support
- Cisco 7960,7940,7912 or 7905: Values 1 to 5 modifies the cadence of the ringtone.
- Grandstream GXP2000: Values 1 to 3 modifies the ring tone. (Requires version 1.3 of Grandstream Support and version 2.3 of GXP2000 resource)
- Polycom phones: See the Polycom Phone Support documentation for the available ringtones (Requires version 1.12 of the Polycom Support module and Polycom phone resources in version 3.0 or higher).
- Aastra phones: See the Aastra Phone Support documentation for the available ringtones.
Examples of use
The action can be used to change the ringtone when dialing an IP phone. Although most IP phones offer the possibility to choose a custom ringtone, you can still override the default ringtone by using this action. The phone specific ringtone will then not be used anymore.
To implement an intercom, you can use the action
SetRingtone to force auto answer on the phone, followed by
PageDevices: All called phones will pick up automatically on speaker and will broadcast whatever you say.