Polycom Phone Support

Description

This module installs the Polycom IP Phone firmwares and libraries to support ESCAUX UC applications

See aggregated list of distributed Polycom firmwares at the end

Release notes

Show release notes
Version 5.17.1 - Early deployment
  • Bugfix: use firmware version for VVX350 aligned with other polycoms (PC-2382)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 2.4.0 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.17.0 - Early deployment
  • Feature: Support for VVX350 (PC-2382)
  • Bugfix: Fix VVX-150 interface for Status softkey feature (PC-2727)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 2.4.0 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.16.1 - Early deployment
  • Bugfix: Case sensitivity issue would cause phone configuration to be removed from /tftpboot (TS-3476)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 2.4.0 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.16.0 - Early deployment
  • Feature: Ensure virtual phone gets reloaded if parameters.json changes (PC-874)
  • Bugfix: Status was not always correctly displayed on VVX (PC-1063)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 2.4.0 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.15.3 - Early deployment
  • Improvement: IP networks allowed to access internal provisioning are now configurable (PC-2796)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 2.4.0 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.15.2 - Early deployment
  • Bugfix: Fix sudoers permissions on upgrade (TS-1499)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 2.4.0 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.15.1 - Deprecated
  • Bugfix: Wrong sudoers permissions (TS-1499)
  • Deprecated: Breaks sudo (TS-1499)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 2.4.0 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.15.0 - Deprecated
  • Feature: Source SOP configuration and FMA support (PC-837)
  • Deprecated: Breaks sudo (TS-1499)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 2.4.0 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.13.6 - Early deployment
  • Feature: Added support for Polycom Trio 8500 (PC-347)
  • Feature: Added support for Polycom VVX 150 (PC-539)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.13.5 - Early deployment
  • Improvement: Added support for VVX 250 & 450 (M25185)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.13.4 - Early deployment
  • Bugfix: Local Admin password not set correctly on SOP (M24266)
  • Bugfix: Phone reboot from SMP was not working (M24266)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.13.3 - Early deployment
  • Improvement: make sure updated phone are properly rebooted (M23915)
  • Improvement: updated polycom-drivers.deb version (M23915)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.13.2 - Early deployment
  • Bugfix: Bump VVX firmware from 5.9.1 to 5.9.2 (M23502)
  • Bugfix: USB port warning displayed when using PoE (M23502)
  • Bugfix: Wrong call log dates with some NTP servers (M23502)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.13.1 - Early deployment
  • Bugfix: Auto reload configuration flag was not working (M23346)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.13.0 - Early deployment
  • Feature: Upgraded FW to 4.0.14 for SPIP and 5.9.1 for VVX (M22966)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.12.0 - Deprecated
  • Feature: Upgrade firmware for internet support on all remaining SPIP (330,450,550,560,670) (M23140)
  • Feature: Added phone reset command (M22982)
  • Improvement: Use crypt password for authentication (M22401)
  • Bugfix: Local directory download was restricted when using firmware upgrade schedule (M22314)
  • Deprecated: Intermediate release never used in production; higher version to be used instead (M0)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.11.1 - Early deployment
  • Bugfix: PUM login and logout were failing (M22254)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.11.0 - Deprecated
  • Feature: Allow to disable LLDP (M21839)
  • Deprecated: PUM login and logout were failing (M22254)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.10.0 - Deprecated
  • Feature: Auto-reload of the configuration in case of configuration changes (M17423)
  • Bugfix: Configuration reload when using SIPTLS was not working (M17423)
  • Deprecated: PUM login and logout were failing (M22254)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • Communication Server module 3.6.0 or higher (in order to have the configuration auto-reload)
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.9.0 - Early deployment
  • Feature: Upgrade firmware for SPIP 670, 650 and 335 on Internet (M20669)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.8.1 - Early deployment
  • Improvement: Increased the number of ringtone available via the alert-info header (M15829)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.8.0 - Early deployment
  • Feature: Added ability to limit simultaneous downloads (M18512)
  • Feature: Added support of zeroconf when HTTP provisioning is used (M19078)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v2.3.0 or higher (if used)

Version 5.7.0 - Early deployment
  • Feature: Support Polycom VVX501 and VVX601 (M16527)
  • Feature: Added the ability to define firmware upgrade schedule (M18512)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.5.1 - Early deployment
  • Bugfix: VVX firmware upgrade to 5.5.1 fixing VVX 300,310,400 and 410 slowness after upgrade (M16654)
  • Bugfix: Fixes reported VVX 310 call issues (M16991)
  • Bugfix: Use Datetime offset from the configuration file even if provided by the DHCP server (M17165)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX101 phone v5.4.0 or higher
    • PolycomVVX201 phone v5.4.0 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX301 phone v5.4.0 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX311 phone v5.4.0 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX401 phone v5.4.0 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX411 phone v5.4.0 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.5.0 - Deprecated
  • Feature: Upgrade IP331 firwmare to enable internet (M16829)
  • Deprecated: The firmware 5.5.0 offered in this release have several stability issue (M16654)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX101 phone v5.4.0 or higher
    • PolycomVVX201 phone v5.4.0 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX301 phone v5.4.0 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX311 phone v5.4.0 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX401 phone v5.4.0 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX411 phone v5.4.0 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.4.0 - Deprecated
  • Improvement: Upgrade VVXs firmware version to 5.5.0 (M15891)
  • Feature: Add support for VVX101, VVX201 (M15901)
  • Feature: Add support for VVX101, VVX201, VVX301, VVX401, VVX411 (M15901)
  • Deprecated: The firmware 5.5.0 offered in this release have several stability issue (M16654)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX101 phone v5.4.0 or higher
    • PolycomVVX201 phone v5.4.0 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX301 phone v5.4.0 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX311 phone v5.4.0 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX401 phone v5.4.0 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX411 phone v5.4.0 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.3.1 - Early deployment
  • Bugfix: Allow provisioning to configure fail2ban (M14898)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.3.0 - Early deployment
  • Feature: Connect phones over internet (M14742)
  • Feature: Fail2ban support (M14743)
  • Bugfix: Fixed false error message (M0)
  • Bugfix: Timezone was not always correct when the timezone name was provided in input (M14953)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.2.1 - Early deployment
  • Improvement: Adapted the timezone support (M12868)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.2.0 - Early deployment
  • Feature: Allow HTTP and HTTPS provisioning at the same time (M9905)
  • Improvement: Register a ZEROCONF user when no config is specified (M9338)
  • Bugfix: Checked installed Polycom Virtual Phone resources version to be > 1.12.0 and restored PUM functionality when updating Polycom Virtual Phone resources (M11599)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Dependency:
    • Baseline version >= 2.4.0 and < 3.0.0
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.1.1 - General deployment
  • Bugfix: In case of upgrade the default value for 'Daylight Savings Time: month to stop' was not set to 'October' (M9681)
  • Bugfix: Remote reboot was not possible after changing the admin password (M10071)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.1.0 - General deployment
  • Feature: Indication on the phone that a call forwarding is currently activated. (M9289)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.0.3 - General deployment
  • Bugfix: The module parameter 'Resolve caller name from local directory' and the subsequent ones were not taken into account (M9675)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone Action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.0.2 - Deprecated
  • Bugfix: Cleaning of the old configuration file after an "Apply change" was not done
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Deprecated: The module parameter 'Resolve caller name from local directory' and the subsequent ones were not taken into account (M9675)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • System Base module version 1.4.1 or higher
    • SetRingTone Action 1.20 or higher
    • PUM module version 3.4.1 or higher (Optional: if used)
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.0.1 - Deprecated
  • Bugfix: Configuration files were not correctly deleted after an apply changes (M8764)
  • Bugfix: it was not possible to create a resource which is not linked to an extension (M9413)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Deprecated: The module parameter 'Resolve caller name from local directory' and the subsequent ones were not taken into account (M9675)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • PUM module version 3.4.1 or higher (Optional: if used)
    • System Base module version 1.4.1 or higher
    • SetRingTone Action 1.20 or higher
    • PolycomIP330 phone v5.1.1 or higher
    • PolycomIP331 phone v5.1.1 or higher
    • PolycomIP335 phone v5.1.1 or higher
    • PolycomIP450 phone v5.1.1 or higher
    • PolycomIP550 phone v5.1.1 or higher
    • PolycomIP560 phone v5.1.1 or higher
    • PolycomIP650 phone v5.1.1 or higher
    • PolycomIP670 phone v5.1.1 or higher
    • PolycomIP6000 phone v5.1.1 or higher
    • PolycomIP7000 phone v5.1.1 or higher
    • PolycomVVX300 phone v5.1.1 or higher
    • PolycomVVX310 phone v5.1.1 or higher
    • PolycomVVX400 phone v5.1.1 or higher
    • PolycomVVX410 phone v5.1.1 or higher
    • PolycomVVX500 phone v5.1.1 or higher
    • PolycomVVX600 phone v5.1.1 or higher
    • PolycomVVX1500 phone v5.1.1 or higher
    • Polycom Virtual Phone v2.0.1 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 5.0.0 - Deprecated
  • Feature: Add support for mConnect and PUM to phones using the version 5.0.0 and above of the resource. (M8992) (M8828)
  • Feature: Upgrade VVX series firmware to 5.1.1 (M9034)
  • Bugfix: Backlight no longer turns on in relation to MWI (VVX phones only) (M8939)
  • Bugfix: Removed reload option (M9031)
  • Limitation: PUM 'login/logout without reboot' doesn't work with this version.
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Deprecated: The module parameter 'Resolve caller name from local directory' and the subsequent ones were not taken into account (M9675)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • SOP API module version 4.2.0 or higher (Optional: If changing intentional status via the browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • PUM module version 3.4.1 or higher (Optional: if used)
    • System Base module version 1.4.1 or higher
    • SetRingTone Action 1.20 or higher
    • PolycomIP330 phone v5.1.0 or higher
    • PolycomIP331 phone v5.1.0 or higher
    • PolycomIP335 phone v5.1.0 or higher
    • PolycomIP450 phone v5.1.0 or higher
    • PolycomIP550 phone v5.1.0 or higher
    • PolycomIP560 phone v5.1.0 or higher
    • PolycomIP650 phone v5.1.0 or higher
    • PolycomIP670 phone v5.1.0 or higher
    • PolycomIP6000 phone v5.1.0 or higher
    • PolycomIP7000 phone v5.1.0 or higher
    • PolycomVVX300 phone v5.1.0 or higher
    • PolycomVVX310 phone v5.1.0 or higher
    • PolycomVVX400 phone v5.1.0 or higher
    • PolycomVVX410 phone v5.1.0 or higher
    • PolycomVVX500 phone v5.1.0 or higher
    • PolycomVVX600 phone v5.1.0 or higher
    • PolycomVVX1500 phone v5.1.0 or higher
    • Polycom Virtual Phone v2.0.0 or higher
    • Phone ZeroConf Task v1.11.0 or higher

Version 4.10.0 - General deployment
  • Bugfix: Overwrite custom configuration options during zeroconf (M0)
  • Bugfix: SVE2 phones now support version 5.0.0 of the Polycom resources (M8672)
  • Improvement: Add reboot for VVX600 phones (M8640)
  • Improvement: Reduce module installation time on high latency networks (M8766)
  • Limitation: The DND softkey cannot be disabled on VVX300/310/400/410 phones (M7743)
  • Limitation: Disabling the DND causes the Polycom phone to send Subscribe message which are rejected by the SOP (M7274)
  • Limitation: Disabling BLF prevents the MyStat and Buddies softkeys to appear (M7746)
  • Limitation: It is not possible to disable some unused softkey such as call forward and DND (M7744)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Limitation: Changing the VVX configuration requires to do an 'update configuration' or to do 2 reboot of the phone. It is recommended to set 'Use reloads instead of reboot if possible' to 'yes' in the module parameters (M8824)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • SetRingTone Action 1.20 or higher
    • PolycomIP6000 phone v4.19 or higher
    • PolycomIP330 phone v4.19 or higher
    • PolycomIP550 phone v4.19 or higher
    • PolycomIP670 phone v4.19 or higher
    • PolycomIP650 phone v4.19 or higher
    • PolycomIP560 phone v4.19 or higher
    • PolycomIP331 phone v4.19 or higher
    • PolycomIP450 phone v4.19 or higher
    • PolycomIP7000 phone v4.19 or higher
    • PolycomVVX500 phone v4.19 or higher
    • PolycomVVX1500 phone v4.19 or higher
    • PolycomVVX310 phone v4.20 or higher
    • PolycomVVX400 phone v4.22 or higher

Version 4.9.0 - General deployment
  • Feature: Support firmware 4.1.6 for VVX300, VVX310, VVX400, VVX410, VVX600 (M8007)
  • Feature: Add reboot and zero-conf support for VVX300 and VVX410 (M8059)
  • Improvement: Code optimization in order to let 'Apply Changes' go faster (M5991)
  • Improvement: Add the possibility to configure DSCP for video (M8370)
  • Improvement: Support directory clearing when the 'local' option is used. (M8065)
  • Bugfix: Reusing macs on different resources no longer breaks provisioning. (M7787)
  • Bugfix: Fix parameters for date function in Idle.php (M7563)
  • Limitation: The DND softkey cannot be disabled on VVX300/310/400/410 phones (M7743)
  • Limitation: Disabling the DND causes the Polycom phone to send Subscribe message which are rejected by the SOP (M7274)
  • Limitation: Disabling BLF prevents the MyStat and Buddies softkeys to appear (M7746)
  • Limitation: It is not possible some unused softkey such as call forward and DND (M7744)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Limitation: Changing the VVX configuration requires to do an 'update configuration' or to do 2 reboot of the phone. It is recommended to set 'Use reloads instead of reboot if possible' to 'yes' in the module parameters (M8824)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • SetRingTone Action 1.20 or higher
    • PolycomIP6000 phone v4.19 or higher
    • PolycomIP330 phone v4.19 or higher
    • PolycomIP550 phone v4.19 or higher
    • PolycomIP670 phone v4.19 or higher
    • PolycomIP650 phone v4.19 or higher
    • PolycomIP560 phone v4.19 or higher
    • PolycomIP331 phone v4.19 or higher
    • PolycomIP450 phone v4.19 or higher
    • PolycomIP7000 phone v4.19 or higher
    • PolycomVVX500 phone v4.19 or higher
    • PolycomVVX1500 phone v4.19 or higher
    • PolycomVVX310 phone v4.20 or higher
    • PolycomVVX400 phone v4.22 or higher

Version 4.8.0 - General deployment
  • Feature: Allows to configure Daylight Saving Time for North America & Mexico (M6258)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • SetRingTone Action 1.20 or higher
    • PolycomIP6000 phone v4.19 or higher
    • PolycomIP330 phone v4.19 or higher
    • PolycomIP550 phone v4.19 or higher
    • PolycomIP670 phone v4.19 or higher
    • PolycomIP650 phone v4.19 or higher
    • PolycomIP560 phone v4.19 or higher
    • PolycomIP331 phone v4.19 or higher
    • PolycomIP450 phone v4.19 or higher
    • PolycomIP7000 phone v4.19 or higher
    • PolycomVVX500 phone v4.19 or higher
    • PolycomVVX1500 phone v4.19 or higher
    • PolycomVVX310 phone v4.20 or higher
    • PolycomVVX400 phone v4.22 or higher

Version 4.7.0 - General deployment
  • Bugfix: IP330 was showing Microbrowser after random time when using idle URL, IP330 firmware downgraded to version 3.3.1RevF (M6591)
  • Improvement: Conditional Idle page was generating a lot of warning messages (M5980)
  • Feature: Adding VVX 310 and VVX 400 firmwares and drivers (M7043)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • SetRingTone Action 1.20 or higher
    • PolycomIP6000 phone v4.19 or higher
    • PolycomIP330 phone v4.19 or higher
    • PolycomIP550 phone v4.19 or higher
    • PolycomIP670 phone v4.19 or higher
    • PolycomIP650 phone v4.19 or higher
    • PolycomIP560 phone v4.19 or higher
    • PolycomIP331 phone v4.19 or higher
    • PolycomIP450 phone v4.19 or higher
    • PolycomIP7000 phone v4.19 or higher
    • PolycomVVX500 phone v4.19 or higher
    • PolycomVVX1500 phone v4.19 or higher
    • PolycomVVX310 phone v4.20 or higher
    • PolycomVVX400 phone v4.22 or higher

Version 4.6.0 - General deployment
  • Feature: Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. Added Firmware v3.3.5 for IP330. (M0006591)
  • Feature: Enable cleaning of old phone configuration didn't work with templating and polycom version 4 or more (M0006988)
  • Bugfix: Fixed ringing in background while on call. (M0006591)
  • Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M0008671)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • SetRingTone Action 1.20 or higher
    • PolycomIP6000 phone v4.19 or higher
    • PolycomIP330 phone v4.19 or higher
    • PolycomIP550 phone v4.19 or higher
    • PolycomIP670 phone v4.19 or higher
    • PolycomIP650 phone v4.19 or higher
    • PolycomIP560 phone v4.19 or higher
    • PolycomIP331 phone v4.19 or higher
    • PolycomIP450 phone v4.19 or higher
    • PolycomIP7000 phone v4.19 or higher
    • PolycomVVX500 phone v4.19 or higher
    • PolycomVVX1500 phone v4.19 or higher

Version 4.5.1 - General deployment
  • Improvement: Allow to detect phone type by SIP useragent in Phone libraries. (M5417)
  • Improvement: Remove old profile configuration files when logging out with PUM. (M5417)
  • Bugfix: PUM shell tools sometimes failed when database inconsistencies occurred. (M5417)
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • SetRingTone Action 1.20 or higher
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher
    • PolycomVVX1500 phone v4.18 or higher

Version 4.5.0 - General deployment
  • Feature: Allow HTTP/HTTPS provisioning (M6263)
  • Feature: Download custom ESCAUX CA through TFTP (M6308)
  • Bugfix: high load on SOP due to idle page. call history now limited to 2 days.
  • Bugfix: fix timezone issue for IP300, IP301, IP4000, IP500, IP501, IP600 and IP601
  • Dependency:
    • SOP Base module version 1.4.4 or higher
    • SOP API module version 2.27.5 or higher (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server module version 1.0.1 or higher (Optional: only when Corporate Directory parameter is set to yes)
    • DHCP Server module version 2.2.0 or higher (Optional: only for HTTP(S) provisioning)
    • SetRingTone Action 1.20 or higher
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher
    • PolycomVVX1500 phone v4.18 or higher

Version 4.4.0 - General deployment
  • Feature: Polycom firmware 4.0.2 Rev B (M5362)
  • Feature: Improved ConditionalIdle to show queue status on the screen of the phone (M0004969)
  • Feature: Configurable NTP Refresh Time (M0005681)
  • Bugfix: Timezone "0" in the module was not working correctly (M5631)
  • Feature: Added phone drivers for VVX1500 (M0005447)
  • Dependency:
    • SOP Base 1.4.4 or higher
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server 1.0.1+ (Optional: only when Corporate Directory parameter is set to yes)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher
    • PolycomVVX1500 phone v4.18 or higher

Version 4.3.3 - General deployment
  • Feature: You are able to call mobile number when doing an LDAP search. Only supported by phone using firmware 4 or above. (IP331, IP335, IP450, IP550, IP650, IP670, IP6000, IP7000, VVX500) (M0005211)
  • Dependency:
    • SOP Base 1.4.0 or higher
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server 1.0.1+ (Optional: only when Corporate Directory parameter is set to yes)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.3.2 - General deployment
  • Bugfix: Configurable incoming caller name resolution (M0005186)
  • Dependency:
    • SOP Base 1.4.0 or higher
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server 1.0.1+ (Optional: only when Corporate Directory parameter is set to yes)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.3.1 - General deployment
  • Improvement: Lookup in Corporate Directory on firstname and lastname (M0004923)
  • Improvement: BLF was disabled for IP301/501/600/601/4000/300/500 (M0005024)
  • Dependency:
    • SOP Base 1.4.0 or higher
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server 1.0.1+ (Optional: only when Corporate Directory parameter is set to yes)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.3.0 - General deployment
  • Feature: Added ConditionalIdle service (M0004946)
  • Dependency:
    • SOP Base 1.4.0 or higher
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server 1.0.1+ (Optional: only when Corporate Directory parameter is set to yes)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.2.0 - General deployment
  • Feature: Do not reboot the phone for PUM if not necessary
  • Bugfix: Polycom configuration broken for zeroconf (M0004769)
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server 1.0.1+ (Optional: only when Corporate Directory parameter is set to yes)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.1.0 - General deployment
  • Feature: Corporate Directory support through LDAP server on the SOP. (M4593)
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (Optional: If the access to the Corporate Directory via the micro-browser is used)
    • LDAP Server 1.0.1+ (Optional: only when Corporate Directory parameter is set to yes)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.0.7 - Early deployment
  • Bugfix: Checked installed Polycom Virtual Phone resources version to be > 1.12.0 and restored PUM functionality when updating Polycom Virtual Phone resources. (M11599)
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (If the the access to the Corporate Directory via the micro-browser is used)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher
    • Polycom Virtual Phone v1.12.1 or higher

Version 4.0.6 - General deployment
  • Improvement: Backported optimization of the code code in order to let "Apply Changes" go faster (M5991)
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (If the the access to the Corporate Directory via the micro-browser is used)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.0.5 - General deployment
  • Bugfix: Backported polycom drivers to make SDPD and SDPH ressources work with new version of PUM and SOP Base (M6980)
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (If the the access to the Corporate Directory via the micro-browser is used)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.0.4 - General deployment
  • Bugfix: Backported polycom drivers to make them work with new version of PUM and SOP Base (M6980)
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (If the the access to the Corporate Directory via the micro-browser is used)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.0.3 - General deployment
  • Feature: Support for Polycom VVX 500. (M4571)
  • Bugfix: Minor bugfixes.
  • Limitation: BLF is disabled for IP600 (M5024)
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (If the the access to the Corporate Directory via the micro-browser is used)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher
    • PolycomVVX500 phone v4.13 or higher

Version 4.0.2 - General deployment
  • Bugfix: incorrect time on older Polycom models (IP300, IP500 and IP600 series).
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (If the the access to the Corporate Directory via the micro-browser is used)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher

Version 4.0.1 - General deployment
  • Feature: Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. Added support for Polycom firmware 4.0.1; downgrade to the previous Polycom firmware 3.x is not supported (M0004296)
  • Improvement: Activated CDP host move detection (M0004296)
  • Dependency:
    • SetRingTone Action 1.20 or higher
    • SOP API 2.27.5+ (If the the access to the Corporate Directory via the micro-browser is used)
    • PolycomIP6000 phone v4.0 or higher
    • PolycomIP300 phone v2.14 or higher
    • PolycomIP500 phone v2.25 or higher
    • PolycomIP600 phone v2.13 or higher
    • PolycomIP4000 phone v3.3 or higher
    • PolycomIP330 phone v4.0 or higher
    • PolycomIP550 phone v4.0 or higher
    • PolycomIP670 phone v4.0 or higher
    • PolycomIP650 phone v4.0 or higher
    • PolycomIP560 phone v4.0 or higher
    • PolycomIP331 phone v4.0 or higher
    • PolycomIP450 phone v4.0 or higher
    • PolycomIP7000 phone v4.0 or higher

Version 3.3.3 - General deployment
  • Bugfix: Add firmware 3.3.5 for all compatible Soundpoint IP phones. (M6591)
  • Limitation: The microbrowser is not functional in this software release. (M7742)
  • Dependency:
    • SOP API 2.27.5+
    • PolycomIP6000 phone v4.0+
    • PolycomIP300 phone v2.14+
    • PolycomIP500 phone v2.25+
    • PolycomIP600 phone v2.13+
    • PolycomIP4000 phone v3.3+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 3.3.2 - General deployment
  • Limitation: Dialplan not generated correctly
  • Dependency:
    • SOP API 2.27.5+
    • PolycomIP6000 phone v4.0+
    • PolycomIP300 phone v2.14+
    • PolycomIP500 phone v2.25+
    • PolycomIP600 phone v2.13+
    • PolycomIP4000 phone v3.3+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 3.3.1 - General deployment
  • Limitation: Admin password settings not taken into account
  • Limitation: Auto-answer with SetRingTone action does not work (ringtone 8)
  • Dependency:
    • SOP API 2.27.5+
    • PolycomIP6000 phone v4.0+
    • PolycomIP300 phone v2.14+
    • PolycomIP500 phone v2.25+
    • PolycomIP600 phone v2.13+
    • PolycomIP4000 phone v3.3+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 3.3.0 - General deployment
  • Improvement: Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. The module was refactored. Contacting Escaux is needed to downgrade to a previous version
  • Feature: Bootrom v4.1.4 for IP300/301/500/501/600/601.
  • Feature: Bootrom v4.2.0 for IP6000/7000.
  • Feature: Bootrom v4.3.0 for the remaining supported phones.
  • Feature: Firmware v2.1.3 for IP300/500.
  • Feature: Firmware v3.1.7 for IP301/501/600/601/4000.
  • Feature: Firmware v3.3.1RevF for the remaining supported phones.
  • Limitation: This version does not successfully install all files required by Polycom phones.
  • Dependency:
    • SOP API 2.27.5+
    • PolycomIP6000 phone v4.0+
    • PolycomIP300 phone v2.14+
    • PolycomIP500 phone v2.25+
    • PolycomIP600 phone v2.13+
    • PolycomIP4000 phone v3.3+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 3.2.1 - General deployment
  • Improvement: never use DHCP provided NTP server
  • Bugfix: SIP DSCP value not taken into account (M0003886)
  • Bugfix: DTMF not working when SIP reinvite is enabled
  • Bugfix: Firmware 3.3.0 does not get loaded on IP6000 and IP7000 (M0003907)
  • Dependency:
    • Database Schema module v1.4+
    • SOP API 2.27.5+
    • PolycomIP6000 phone v4.0+
    • PolycomIP300 phone v2.13+
    • PolycomIP500 phone v2.21+
    • PolycomIP600 phone v2.22+
    • PolycomIP4000 phone v3.1+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 3.2.0 - General deployment
  • Feature: Supports Baseline 2.0 (M0003103)
  • Bug: Symlinks must be relative for newest TFTP server (M0003591)
  • Dependency:
    • Database Schema module v1.4+
    • SOP API 2.27.5+
    • PolycomIP6000 phone v4.0+
    • PolycomIP300 phone v2.13+
    • PolycomIP500 phone v2.21+
    • PolycomIP600 phone v2.22+
    • PolycomIP4000 phone v3.1+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 3.1.1 - Deprecated
  • Feature: Supports Zeroconf (M0)
  • Feature: HTTP provisioning (M0003212)
  • Feature: 802.1x EAPOL Logoff support (M0)
  • Deprecated: Module was rejected by or has not been validated by our quality assurance department. (M5733)
  • Dependency:
    • Database Schema module v1.4+
    • SOP API 2.27.5+
    • PolycomIP6000 phone v4.0+
    • PolycomIP300 phone v2.13+
    • PolycomIP500 phone v2.21+
    • PolycomIP600 phone v2.22+
    • PolycomIP4000 phone v3.1+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 3.1.0 - General deployment
  • Feature: Supports Zeroconf
  • Feature: HTTP provisioning (M0003212)
  • Feature: 802.1x EAPOL Logoff support
  • Dependency:
    • Database Schema module v1.4+
    • SOP API 2.27.5+
    • PolycomIP6000 phone v4.0+
    • PolycomIP300 phone v2.13+
    • PolycomIP500 phone v2.21+
    • PolycomIP600 phone v2.22+
    • PolycomIP4000 phone v3.1+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 3.0.0 - General deployment
  • Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.. Configuration files for Polycom phones have changed and are not backward compatible. Make sure to use the right phone resource.
  • Feature: Support for Polycom UC Software 3.3.0 (M0001489)
  • Know issue Polycom IP7000/6000 phones don 't work.
  • Dependency:
    • Database Schema module v1.4+
    • SOP API 2.27.5+
    • PolycomIP300 phone v2.13+
    • PolycomIP500 phone v2.21+
    • PolycomIP6000 phone v4.0+
    • PolycomIP600 phone v2.22+
    • PolycomIP4000 phone v3.1+
    • PolycomIP330 phone v4.0+
    • PolycomIP550 phone v4.0+
    • PolycomIP670 phone v4.0+
    • PolycomIP650 phone v4.0+
    • PolycomIP560 phone v4.0+
    • PolycomIP331 phone v4.0+
    • PolycomIP450 phone v4.0+
    • PolycomIP7000 phone v4.0+

Version 2.8.4 - General deployment
  • Feature: wildcard usage in front of search terms can be explicitly enforced (default = implicit wildcard before and after search term)
  • Bug fix: Corrected polycom-postsync script to delete -directory.xml file (M0002968)
  • Dependency:
    • Database Schema module v1.4+
    • SOP API 2.27.5+

Version 2.8.3 - General deployment
  • Improvement: Configurable maximum number of results when using the XML application for the directory
  • Improvement: Sorting option of the results added when using the XML application for the directory
  • Improvement: "No Results" is shown in case no entries match the given criteria in the XML directory application
  • Dependency:
    • Database Schema module v1.4+

Version 2.8.2 - General deployment
  • Bug fix: Added firmware files for models with discontinued firmware

Version 2.8.1 - General deployment
  • Bug fix: Phone directory not restored after PUM logout
  • Bug fix: Url truncated (e.g. idleDisplay.Home) on PUM login
  • Feature: Permit not displaying incoming group pickup calls with the Idle browser page

Version 2.8.0 - General deployment
  • Bug fix: Enable the virtual resource (SVE2xxxx) to generate the local directory.

Version 2.7.0 - General deployment
  • Feature: added ability to have read-only directory (M0002362 )
  • Feature: added ability to change admin password (M0002407)

Version 2.6.0 - General deployment
  • Feature: added support for Polycom IP450
  • Dependency:
    • Asterisk-1.2 v.2.26+ (optional)
    • PUM v2.12+ (optional)

Version 2.5.0 - General deployment
  • Bug fix: Pum login fails after doing it via command line interface (M0002326)
  • Dependency:
    • Asterisk-1.2 v.2.26+ (optional)
    • PUM v2.12+ (optional)

Version 2.4.0 - General deployment
  • Feature: Support of IP331 (M0002143)
  • Feature: Add the possibility to reboot phone which are trying to register but which are not accepted by the SOP (M0002204)
  • Bug fix: DSCP and dialplan settings not set properly (M0002198)
  • Bug fix: Prevent PUM virtual phone to overwrite all physical phone settings (Timezone, etc.) (M0002046)
  • Improve: new bootrom 4.2.0B and firmware 3.2.1B
  • Dependency:
    • Asterisk-1.2 v.2.26+ (optional)
    • PUM v2.12+ (optional)

Version 2.3.0 - General deployment
  • Feature: Active-active telephony support for PUM (M0001651)
  • Feature: Support of PUM for all Polycom phones (M0001696)
  • Dependency:
    • PUM v2.3+ (optional)

Version 2.2.0 - General deployment
  • Bug fix: Added missing firmware files for the IP300 model
  • Bug fix: Unidirectional voice upon receiving a second call on the IP300 model

Version 2.1.0 - General deployment
  • Cleaning up of old configuration files when the related resource is removed

Version 2.0.0 - General deployment
  • Minimal required version when using module TFTP 2.0 or higher

Version 1.13.0 - General deployment
  • Added group pickup support through the microbrowser

Version 1.12.0 - General deployment
  • Firmware polycom v3.1.1
  • Bootrom v4.1.2
  • Ringtones (SetRingTone action compatibility)
  • Suppress audio MWI
  • Fix Winter time

Version 1.11.0 - General deployment
  • Firmware polycom v3.03 RevB

Version 1.10.0 - General deployment
  • added remote-reboot support for SDP5, SDP6 and SDP7

Version 1.9.0 - General deployment
  • Potential update impact level 3 DONE: in the event this update contains a bug, it might have critical impact. ERROR! Given the complexity of the update, it is advised to contact ESCAUX support before applying this update.
  • PUM support for IP 330
  • Remote reboot source port fixed to 5060 for better firewall traversal

Version 1.8.0 - General deployment
  • Potential update impact level 3 DONE: in the event this update contains a bug, it might have critical impact. ERROR! Given the complexity of the update, it is advised to contact ESCAUX support before applying this update.
  • Bootrom 4.0 (Fix handsfree for IP330)
  • Phones reboots until a proper configuration has been pushed by the SMP

Version 1.7.0 - General deployment
  • Potential update impact level 3 DONE: in the event this update contains a bug, it might have critical impact. ERROR! Given the complexity of the update, it is advised to contact ESCAUX support before applying this update.
  • Remote reboot of Polycom phones made possible
  • persistant volume setting added

Version 1.6.0 - General deployment
  • Potential update impact level 3 DONE: in the event this update contains a bug, it might have critical impact. ERROR! Given the complexity of the update, it is advised to contact ESCAUX support before applying this update.
  • Remote reboot of Polycom phones made possible

Version 1.5.0 - General deployment
  • Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.
  • RTP/UDP port range of packets emitted by the phone starts at 16384 instead of the default 2220

Version 1.4.0 - General deployment
  • Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.
  • New firmware 2.2
  • Add DSCP for signaling and RTP

Version 1.3.0 - General deployment
  • Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.
  • New firmware 2.2
  • Add DSCP for signaling and RTP

Version 1.2.0 - General deployment
  • fix DST bug.

Version 1.1.0 - Deprecated
  • initial version

Module configuration interface

create_resource_form: .:/usr/share/escaux/glue/lib:/usr/share/escaux/glue/bin/gen_wiki_documentation/src/lib:/usr/share/escaux/glue/bin/gen_wiki_documentation/src/lib/

Voice RTP DSCP value (decimal)
SIP signaling DSCP value (decimal)
Dialplan
Forced phone reboot at registration failure
Editable directory
Admin password
Directory XML application: maximum number of results
Directory XML application: sort option for the result
Directory XML application: explicit search wildcards
Timezone
Unconfigured off-hook extension
Mode
Corporate Directory
Resolve caller name from local directory
NTP Refresh Time (in hours)
Provisioning protocol to use
Daylight Savings Time: specified day of the month to start
Daylight Savings Time: day to start
Daylight Savings Time: month to start
Daylight Savings Time: specified day of the month to stop
Daylight Savings Time: day to stop
Daylight Savings Time: month to stop
Video RTP DSCP value (decimal)
Internet Access
Static HTTP Authentication (user:password)
Disable HTTP firmware upgrade
Simultaneous firmware download
Force Polycom reload when configuration changes
LLDP enabled

Module configuration parameters

  • Voice RTP DSCP value (decimal): Decimal DSCP value used for voice IP packets. (See annex for more information)
  • SIP signaling DSCP value (decimal): Decimal DSCP value used for signaling IP packets
  • Dialplan: Dialplan used to have an automatic number composition when the user dial a number matching the dialplan. A dialplan is defined either by a 'string' or by a list of strings. Each string in the list is an alternative numbering scheme, specified either as a set of digits or timers, or as an expression over which the phone will attempt to find a shortest possible match. Refer to chapter 2.1.5 of RFC3435 for more information. Enter a string of form e.g. (0T|00T|[1-7]xxx|8xxxxxxx|#xxxxxxx|*xx|91xxxxxxxxxx|9011x.T)
  • Forced phone reboot at registration failure: In some situations, a Polycom phone wants to register to a SOP but the SOP does not accept the registration (for example, it is the case when the administrator change the field SOP1 and SOP2 of a phone at the SMP level and cannot reboot the phone physically). This setting checks the existence of such phones periodically and forces their reboot in order to let the phones re-download their configuration. Please use this feature with precaution. This feature requires asterisk version 2.26 or higher.
  • Editable directory: By default to "enable", the option in the "Contact Directory" can be changed from "edit" to "view" if this parameter is set to "disable".
  • Admin password: The password used to access the device's web interface and to access the advanced settings through the phone menu. If left empty, the device will use a default password and show an exclamation mark on the display. We advice to set a custom password, composed of 6 alphanumerical characters.
  • Directory XML application: maximum number of results : configure the maximum number of results which will be returned by the XML directory application. This requires the XML directory application to be configured in the phone resource (Application URL = polycom/Dir.php). Default: maximum 10 entries are returned.
  • Directory XML application: sort option for the result : configure sorting of the results returned by the XML directory application. This requires the XML directory application to be configured in the phone resource (Application URL = polycom/Dir.php). Sort options:
    • Last name (default)
    • First name
    • Extension
    • Email address
  • Timezone : the timezone offset to use in hours. (since 5.2.1 if default has been selected, the sop's timezone will be used).
  • Mode
    • Secure - will block access to everything that uses the directory /polycom/.
    • Compatibility - will allow access to the /polycom/ directory.
  • Corporate Directory : Set to yes to enable access to the corporate directory through the Polycom phones. This is only supported on phones that run at least version 3.0 of the Polycom firmware. Check the release notes of the Polycom phone support module version 3.3.0 to find out which phones are supported. This feature requires the LDAP server module version 1.0.1+ to be installed.
  • NTP Refresh Time: Set the amount of time that the telephone should resync its time from the NTP server.
  • Provisioning protocol to use The protocol to use to provision the phones. This parameter must be coherent with the parameter set in the DHCP Server module. See the Secure Telephony Administrator Guide for the extra steps needed.
  • Daylight Savings: specified day of the month to start : You can specify if you want to switch from winter to summer time the first, second, ... or last specified day of the month. Default value is "Last".
  • Daylight Savings: day to start: You can specify the day of the week to switch from winter to summer time. Default value is "Sunday".
  • Daylight Savings: month to start: You can specify the month of the year to switch from winter to summer time. Default value is "March".
  • Daylight Savings: specified day of the month to stop : You can specify if you want to switch from summer to winter time the first, second, ... or last specified day of the month. Default value is "Last".
  • Daylight Savings: day to stop: You can specify the day of the week to switch from summer to winter time. Default value is "Sunday".
  • Daylight Savings: month to stop: You can specify the month of the year to switch from summer to winter time. Default value is "October".
  • Video RTP DSCP value (decimal): Decimal DSCP value used for video IP packets. (See annex for more information)
  • Internet Access: Activate compatibility with phones registered through internet instead of LAN.
  • Static HTTP Authentication: When HTTP(S) provisioning is used, a static user:password tuple can be defined here (in addition to other access control methods).
  • Force Polycom reload when configuration changes: When a new configuration file for a phone is available, trigger the Polycom phone to reload its configuration
  • IP networks allowed to access internal provisioning: One network by line in the format <net>/<mask> (e.g. '192.168.0.0/16').

Optional features

  • Personal User Mobility support: Enables a user to login on a phone in order to personalize the configuration of the phone and get all the call to its own extension routed to this phone. This requires the PUM module.
  • Active-Active support: Enable a phone to have a fallback to a secondary server in case of failure of the primary SOP.

Automatic reload

Starting from version 5.10.0, a reload is launched on every Polycom phone at the time of the Apply-Changes. This means phones check their configuration file on the SOP and apply any new settings found. They can reboot if one of those settings need a reboot (rare). They will also check the firmware on SOP and reboot to upgrade/downgrade as needed. The phones will however wait the end of a call to reboot.

SetRingtone action compatibility

Starting from version 1.12 of the module and using Polycom resource version 3.0 or higher, it is now possible to control the ringtones from a call flow using the SetRingtone action. Please refer to the SetRingTone action documentation for more information.

Following values for ring tones are supported since version 5.8.1 of the module :

Ring tone Description Polycom description
1 Standard Default
2 Standard continuous Low Trill Precedence
3 Silent (Single beep) Ring Splash
4 Polyphonic Sampled audio file 1
7 Silent Visual
8 Auto Answer Answer
10   Silent Ring
11   Low Trill
12   Low Double Trill
13   Medium Trill
14   Medium Double Trill
15   High Trill
16   High Double Trill
17   Highest Trill
18   Highest Double Trill
19   Beeble
20   Triplet
21   Ringback-style

Following values for ring tones are supported between version 3.0.0 and 5.8.0 of the module :

Ring tone Description
1 Standard
2 Standard continuous
3 Silent (Single beep)
4 Polyphonic
7 Silent
8 Auto Answer

Before :

Ring tone Description
1 Standard
2 Polyphonic 1
3 Polyphonic 2
4 Polyphonic 3
7 Silent
8 Auto Answer

Annex

Diffserv traffic class Hex value Dec value
CS0 0x00 0
CS1 0x08 8
CS2 0x10 16
CS3 0x18 24
CS4 0x20 32
CS5 0x28 40
CS6 0x30 48
CS7 0x38 56
AF11 0x0A 10
AF12 0x0C 12
AF13 0x0E 14
AF21 0x12 18
AF22 0x14 20
AF23 0x16 22
AF31 0x1A 26
AF32 0x1C 28
AF33 0x1E 30
AF41 0x22 34
AF42 0x24 36
AF43 0x26 38
EF 0x2E 46

For more information see:

Autoprovisioning

Please consult the Customer DHCP Server configuration guide for more information about the DHCP options necessary for autoprovisioning of this type of device.

Distributed Polycom firmwares and Bootroms

  • From Polycom Phone Support v5.17.0:
    • Firmware 5.9.6.2996 for VVX 301/311, VVX 350
    • Firmware 5.9.5.0614 for VVX 150
    • Firmware v5.9.2.3446 for VVX 101, VVX 201, VVX 250, VVX 300/310, VVX 400/410, VVX 401/411, VVX 450, VVX 500, VVX 501, VVX 600, VVX 601, VVX D60, VVX 1500
    • Firmware v4.0.14 for IP321/331, IP335, IP450, IP550, IP560, IP650, IP670, IP5000, IP6000, IP7000
    • Firmware v3.3.1F for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v5.13.0:
    • Firmware v5.9.1 for VVX 101, VVX 150, VVX 201, VVX 250, VVX 300/310, VVX 301/311, VVX 350, VVX 400/410, VVX 401/411, VVX 450, VVX 500, VVX 501, VVX 600, VVX 601, VVX D60, VVX 1500
    • Firmware v4.0.14 for IP321/331, IP335, IP450, IP550, IP560, IP650, IP670, IP5000, IP6000, IP7000
    • Firmware v3.3.1F for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v5.5.1:
    • Firmware v5.5.1 for VVX101, VVX201, VVX300, VVX301, VVX310, VVX311, VVX400, VVX401, VVX410, VVX411, VVX500, VVX600, VVX1500
    • Firmware v4.0.11.0583 for IP331
    • Firmware v4.0.2 Rev B for IP450, IP550, IP560, IP650, IP670, IP6000, IP7000
    • Firmware v3.3.1F for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v5.5.0:
    • Firmware v5.5.0 for VVX101, VVX201, VVX300, VVX301, VVX310, VVX311, VVX400, VVX401, VVX410, VVX411, VVX500, VVX600, VVX1500
    • Firmware v4.0.11.0583 for IP331
    • Firmware v4.0.2 Rev B for IP450, IP550, IP560, IP650, IP670, IP6000, IP7000
    • Firmware v3.3.1F for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v5.4.0:
    • Firmware v5.5.0 for VVX101, VVX201, VVX300, VVX301, VVX310, VVX311, VVX400, VVX401, VVX410, VVX411, VVX500, VVX600, VVX1500
    • Firmware v4.0.2 Rev B for IP331, IP450, IP550, IP560, IP650, IP670, IP6000, IP7000
    • Firmware v3.3.1F for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v5.0.0:
    • Firmware v5.1.1 for VVX300, VVX310, VVX400, VVX410, VVX500, VVX600, VVX1500
    • Firmware v4.0.2 Rev B for IP331, IP450, IP550, IP560, IP650, IP670, IP6000, IP7000
    • Firmware v3.3.1F for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v4.9.0:
    • Firmware v4.1.6 for VVX300, VVX310, VVX400, VVX410, VVX500, VVX600, VVX1500
    • Firmware v4.0.2 Rev B for IP331, IP450, IP550, IP560, IP650, IP670, IP6000, IP7000
    • Firmware v3.3.1F for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v4.7.0:
    • Firmware v4.0.2 Rev B for IP331, IP450, IP550, IP560, IP650, IP670, IP6000, IP7000, VVX500, VVX1500
    • Firmware v3.3.1 Rev F for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v4.6.0:
    • Firmware v4.0.2 Rev B for IP331, IP450, IP550, IP560, IP650, IP670, IP6000, IP7000, VVX500, VVX1500
    • Firmware v3.3.5 for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v4.4.0:
    • Firmware v4.0.2 Rev B for IP331, IP450, IP550, IP560, IP650, IP670, IP6000, IP7000, VVX500, VVX1500
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Firmware v3.3.1RevF for IP330
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v4.0.1:
    • Firmware v4.0.1 for IP331, IP450, IP550, IP560, IP650, IP670, IP6000, IP7000
    • Firmware v3.3.1RevF for IP330
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.3.0 for IP330
    • Bootrom v4.4.0 for the remaining supported phones.

  • From Polycom Phone Support v3.3.0:
    • Bootrom v4.1.4 for IP300/301/500/501/600/601
    • Bootrom v4.2.0 for IP6000/7000
    • Bootrom v4.3.0 for the remaining supported phones.
    • Firmware v2.1.3 for IP300/500
    • Firmware v3.1.7 for IP301/501/600/601/4000
    • Firmware v3.3.1RevF for the remaining supported phones.

Changing status via the browser

The Polycom Phone Support module 5.0.0 (or higher) and Polycom VVX300/310/400/410/500/600 resource version 5.1.0 (or higher) provides a convenient graphical way to allow a user to change his intentional status.

To activate this feature, the administrator should change the following settings in the resource:
  • Enable one of the Softkeys and add a label such as 'Status'
  • In the corresponding action field add: 
   /polycom/Status/index.php/extension/<extension>
  • Where <extension> should be replaced by the actual extension, or by the ETL expression [%=e%].

Additionally, the user can also use this interface to manage his call forwarding. For this, Polycom Phone Support Module 5.1.0 (or higher) and Fusion 3.x.x is required. To activate this feature, the action field will have to be extended with two new parameters: 

   /polycom/Status/index.php/extension/<extension>?forwardParameter=<forward_parameter>&numberParameter=<number_parameter>

  • Where <forward_parameter> should be replaced with the parameter name that indicates if call forward is enabled. Example for Fusion 3.x.x : UnifyUserGreenCFU.
  • Where <number_parameter> should be replaced with the parameter name that stores the forward number. Example for Fusion 3.x.x : UnifyUserGreenForwardAllNumber

Daylight Savings

Default values are correct for most European countries.

Copyright © Escaux SA