vSopHost

This document describes the changes that exist between the different versions the Escaux vSopHost template

IMPORTANT NOTE

If you use a DL360 G9, a Baseline 3.4 or higher or the Kernel module 1.3 or higher, make sure to use the template version 4 or higher. Not respecting this requirement can cause serious stability issue.

Installation procedure

When you first install a vSopHost follow this procedure:
  • Load the template
  • Configure the template
  • Install modules
  • Apply changes
  • Reboot the server

Changing the network configuration

Since version 4.2.0, the network is not restarted automatically when the network module is (re)installed. This is done as a mitigation for an issue where all vSOP's lose their connectivity when upgrading the host.

If you want to change the network configuration you have 2 options:
  • Reboot the server.
  • Install the network module, and then manually restart networking and all vSOP's.

Upgrade procedure

ALERT! It is not required to install all the intermediate versions. The targeted version can be installed directly

The following steps needs to be executed in order to upgrade from one version to another one:
  1. Check the version currently used on the vSOP Host
  2. Review the release notes , the Special manual upgrade actions of all the versions between your current version and the targeted version
  3. Check the dependencies of the targeted version
  4. If your vSOP Host is part of a cluster, upgrade first the Master Sopkey
    DONE Navigate to: SMP > Master Sopkey > Advanced > Apply Public Template Upgrade
    Select the required template, click Upgrade?
  5. For each vSOP Host, repeat the following operations:
    1. Upgrade the vSOP Host template
      DONE Navigate to: SMP > vSOP Host Sopkey > Advanced > Apply Public Template Upgrade
      Select the required template and click Upgrade
    2. Select all the modules
      DONE Navigate to: SMP > vSOP Host Sopkey > Advanced > Module Configuration
      Click Schedule and then Install Modules. Check that no error occurred. ALERT! If the module Network is installed all the vsop needs to be restarted.
    3. Push the New configuration
      DONE Navigate to: SMP > vSOP Host Sopkey > Apply Changes > Apply SOP Changes
      Check that no error occurred.
    4. Execute all the Special manual upgrade actions indicated for each version between the current version and the targeted version

Version 6.1.1 - Early deployment

Release notes

  • Feature: support for running from baseline 3 SMPs (FMG-1692)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
VirtualSOP   3.7.0 (Early deployment)

Actions

Action Previous release version Version
AddQueueMember   1.2
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.8.0 - Early deployment

Release notes

  • Feature: Support for baseline8 vsops (MS-313)
  • Feature: Support DHCP in install.ini (MS-370)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

New action versions

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
VirtualSOP 3.5.0 3.7.0 (Early deployment)

Actions

Action Previous release version Version
AddQueueMember   1.2
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.7.0 - Early deployment

Release notes

  • Feature: Support for baseline7 vsops (MS-72)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 3.4.0 3.5.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.5.0 - Early deployment

Release notes

  • Feature: Support 4 network interfaces inside the vSOP (MCH-1116)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 3.3.1 3.4.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.4.0 - Early deployment

Release notes

  • Improvement: Be more verbose about errors when starting a vSop (TS-1170)
  • Bugfix: Shared memory in temporary RAM filesystem for baseline2 guests (MCH-724)
  • Bugfix: vSops did not restart when the host was rebooted (MCH-748)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP   3.3.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.3.1 - Early deployment

Release notes

  • Bugfix: SSH router in a vSOP was not working because insufficient UID's were allocated (MCH-410)
  • Bugfix: 2 Apply changes were required when a vSOP was created for the first time (TS-346)
  • Improvement: Raise limits of linux kernel with upstream recommendations
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 3.3.0 3.3.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.3.0 - Early deployment

Release notes

  • Feature: Set a default CPU limit per container (MCH-331)
  • Improvement: Raise the number of PID's and pty's to a reasonable number to support many containers. (MCH-328)
  • Bugfix: configure a default lower (soft) limit of maximum open files, but allow a processes to raise the limit (TS-100)
  • Bugfix: Allow longer timeout when stopping and starting vSOP's on shutdown and startup (MCH-334)
  • Bugfix: Preventing bridging loops no longer worked on baseline5 (MCH-336)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

  • VirtualSOP
    • VirtualSOP v.3.3.0 Show release notes
      • Feature: Allow setting a hard CPU limit (MCH-331)
      • Bugfix: Overriding default memory limit makes vsops unwilling to start (MCH-316)
      • Feature: Allow patching the configuration of a vsop

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 3.2.0 3.3.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.2.0 - Early deployment

Release notes

  • Feature: Support macvlan bridging on vlan interfaces (MCH-226)
  • Bugfix: Coredumps of vSOP's were not stored inside the vSOP (MCH-298)
  • Bugfix: Networking is not restarted automatically when the playbook runs (MCH-178)
  • Bugfix: NTP server troubleshooting was not working (MCH-233)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 3.1.0 3.2.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.1.0 - Early deployment

Release notes

  • Feature: support installation of baseline6 vSOP's based on Debian Buster (M25286)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 3.0.0 3.1.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.0.2 - Early deployment

Release notes

  • Bugfix: Baseline 4 vSOP's could not be installed (M25287)
  • Bugfix: Journal cache on baseline 4 was kept in memory instead of on disk (M24968)
  • Bugfix: Security updates could not be installed (M25508)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP   3.0.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 5.0.0 - Early deployment

Release notes

  • Feature: Compatibility with baseline 5 (M24943)
  • Dependency:
    • Baseline >= 5.0.0

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

New action versions

No new action versions.

Included components

Modules

There are no modules included in this template release.

Resources

Resource Previous release version Version
ReportSmpWebAudit   1.5
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 2.8.2 3.0.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.9.3 - Early deployment

Release notes

  • Bugfix: Dependencies were broken when a baseline2 vsop was installed (MCH-1524)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
System Base   2.5.3 (Early deployment)
Software sources   1.4.0 (Early deployment)
SNMP Agent   4.3.1 (Early deployment)
vSOP Support 4.7.2 4.7.3 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.2 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.9.2 - Early deployment

Release notes

  • Bugfix: Sometimes package installation would fail on baseline 2 vsops (MCH-1364)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
System Base   2.5.3 (Early deployment)
Software sources   1.4.0 (Early deployment)
SNMP Agent   4.3.1 (Early deployment)
vSOP Support 4.7.1 4.7.2 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.2 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.9.1 - Early deployment

Release notes

  • Improvement: raise maximum PIDs (MCH-1234)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
System Base   2.5.3 (Early deployment)
Software sources   1.4.0 (Early deployment)
SNMP Agent   4.3.1 (Early deployment)
vSOP Support 4.7.0 4.7.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.2 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.9.0 - Early deployment

Release notes

  • Feature: Set a default CPU limit for vSOP's that can be overridden in the VSOP resource - port to baseline 3 (MCH-1112)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
System Base   2.5.3 (Early deployment)
Software sources   1.4.0 (Early deployment)
SNMP Agent   4.3.1 (Early deployment)
vSOP Support 4.6.3 4.7.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP 2.8.0 2.8.2 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.8.3 - Early deployment

Release notes

  • Bugfix: Install patched version of rsync on baseline2 vsop installation to avoid coredumps (MCH-1104)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

  • vSOP Support

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
System Base   2.5.3 (Early deployment)
Software sources   1.4.0 (Early deployment)
SNMP Agent   4.3.1 (Early deployment)
vSOP Support 4.6.2 4.6.3 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.8.2 - Early deployment

Release notes

  • Bugfix: processes inside vsop's could get killed when installing the SNMP agent module on the host (MCH-1114)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

  • SNMP Agent

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
vSOP Support   4.6.2 (Early deployment)
System Base   2.5.3 (Early deployment)
Software sources   1.4.0 (Early deployment)
SNMP Agent 4.3.0 4.3.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.8.1 - Early deployment

Release notes

  • Bugfix: Template would not install on some patched vSOP hosts (TS-2392)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
vSOP Support   4.6.2 (Early deployment)
System Base   2.5.3 (Early deployment)
Software sources 1.3.1 1.4.0 (Early deployment)
SNMP Agent 4.2.0 4.3.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.8.0 - Early deployment

Release notes

  • Feature: Supporting monitoring of coredumps (MCH-29)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
SNMP Agent   4.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
Software sources   1.3.1 (Early deployment)
vSOP Support   4.6.2 (Early deployment)
System Base 2.5.2 2.5.3 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.7.2 - Early deployment

Release notes

  • Improvement: increase ARP cache size and timers for large clusters (M23111)
  • Improvement: Don't notify about swap usage (M21855)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
SNMP Agent   4.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
System Base   2.5.2 (Early deployment)
Software sources   1.3.1 (Early deployment)
vSOP Support 4.6.1 4.6.2 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.7.1 - Early deployment

Release notes

  • Bugfix: DNS server configuration was broken when a 2nd DNS server was specified for a guest vSOP (M22745)
  • Improvement: Usage of legacy hardware probes is permitted, but not included by default (M23008)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

  • NTP Server
  • Disk Space Inode
  • Power Supplies Temperature
    • Power Supplies Temperature v.3.0.0 Show release notes
      • Feature: Monitor component through SNMP (M12556)
      • Limitation: In case of temperature alert in another hardware component, this probe will generate an alert even if said component is not monitored. (M12556)
  • Aggregated Performance
    • Aggregated Performance v.1.1.2 Show release notes
      • Bugfix: Probe was not working when long name were used in Nagios Host name (M15249)
      • Bugfix: Automatic probe selection was not working (M15249)

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
SNMP Agent   4.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
System Base   2.5.2 (Early deployment)
Software sources   1.3.1 (Early deployment)
vSOP Support 4.6.0 4.6.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
NTP Server   1.0.0
Disk Space Inode   1.0.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Aggregated Performance   1.1.2 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.8.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.7.0 - Early deployment

Release notes

  • Feature: Support for Baseline5 vSOP's (M22746)
  • Improvement: Spread nightly cache update of Baseline4+ install cache
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
SNMP Agent   4.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
Shell   2.1.2 (Early deployment)
System Base   2.5.2 (Early deployment)
Software sources   1.3.1 (Early deployment)
vSOP Support 4.5.0 4.6.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP 2.7.1 2.8.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.6.0 - Early deployment

Release notes

  • Feature: Baseline 4 vSOP install cache is now updated every night with security updates included and the latest Escaux packages (M21201)
  • Improvement: Introduce a 5 second delay between starts when starting all vSOP's
  • Bugfix: The host public key could not be published through the CLI (M21889)
  • Bugfix: Don't stop starting vSOP's if one fails when starting all vSOP's (M21829)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

There are no special actions to perform during the upgrade.

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Network   3.0.1 (Early deployment)
NTP server   2.2.0 (Early deployment)
SNMP Agent   4.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
vSOP Support 4.4.0 4.5.0 (Early deployment)
Shell 2.1.1 2.1.2 (Early deployment)
System Base 2.4.0 2.5.2 (Early deployment)
Software sources 1.2.2 1.3.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.7.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.5.0 - Early deployment

Release notes

  • Feature: Allow execution of a command inside a VSOP from the host (M13316)
  • Improvement: Reduce wait time between VSOP startup on host boot
  • Improvement: Spread hourly/daily/weekly/monthly cron over a longer interval (M20826)
  • Bugfix: Increase number of available PID to prevent running out of resources when running lots of VSOP's (M20829)
  • Bugfix: Fix loading of iptables modules for VSOP's (M20876)
  • Bugfix: Disable udev in baseline4 VSOP's. It is not useful anyway and cause races with the host udev (M21119)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
The vSOP host needs to be rebooted after installing the modules

Changed components

Show changed components

New module versions

  • vSOP Support
    • vSOP Support v.4.4.0 Show release notes
      • Feature: Allow execution of a command inside a VSOP from the host (M13316) - link
      • Improvement: Reduce wait time between VSOP startup on host boot
      • Improvement: Spread hourly/daily/weekly/monthly cron over a longer interval (M20826) - link
      • Bugfix: Increase number of available PID to prevent running out of resources when running lots of VSOP's (M20829) - link
      • Bugfix: Fix loading of iptables modules for VSOP's (M20876) - link
      • Bugfix: Disable udev in baseline4 VSOP's. It is not useful anyway and cause races with the host udev (M21119) - link

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
Shell   2.1.1 (Early deployment)
Network   3.0.1 (Early deployment)
System Base   2.4.0 (Early deployment)
NTP server   2.2.0 (Early deployment)
SNMP Agent   4.2.0 (Early deployment)
Watchdog   2.2.0 (Early deployment)
vSOP Support 4.3.1 4.4.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.7.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.4.1 - Early deployment

Release notes

  • Bugfix: Could not install on recent baseline3 hosts (M20759)
  • Bugfix: Resolve 100% CPU usage on baseline4 vSOP's on startup (M20642)
  • Bugfix: Support more than 40 baseline4 vSOP's (M20641)
  • Improvement: Remove safetynet and watchdog
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
The vSOP host needs to be rebooted after installing the modules

Changed components

Show changed components

New module versions

New resource versions

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
Shell   2.1.1 (Early deployment)
Network   3.0.1 (Early deployment)
System Base   2.4.0 (Early deployment)
NTP server 2.1.0 2.2.0 (Early deployment)
SNMP Agent 4.1.2 4.2.0 (Early deployment)
Watchdog 2.1.0 2.2.0 (Early deployment)
vSOP Support 4.3.0 4.3.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP 2.7.0 2.7.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.4.0 - Deprecated

Release notes

  • Improvement: Limit vSOP memory by default (M19961)
  • Improvement: Prevent bridging on the slave interface of a bond (M19976)
  • Bugfix: Account code was no longer visible when listing vSOP's on the CLI (M20254)
  • Deprecated: Cannot install on recent baseline 3 releases
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
The vSOP host needs to be rebooted after installing the modules

Changed components

Show changed components

New module versions

New resource versions

  • VirtualSOP
    • VirtualSOP v.2.7.0 Show release notes
      • Improvement: Include default configuration settings provided by the vSOP Support module. (M19961) - link
      • Bugfix: Updated label for vSOP's installed through the install.ini field. (M19148) - link
      • Bugfix: Account code was no longer shown when listing vSOP's. (M20254) - link

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
Shell   2.1.1 (Early deployment)
SNMP Agent   4.1.2 (Early deployment)
Network   3.0.1 (Early deployment)
System Base   2.4.0 (Early deployment)
vSOP Support 4.2.0 4.3.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP 2.6.0 2.7.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.3.0 - Early deployment

Release notes

  • Improvement: Reduce kernel swappiness when more than 16 GB of RAM is available. (M18857)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
Shell   2.1.1 (Early deployment)
SNMP Agent   4.1.2 (Early deployment)
Network   3.0.1 (Early deployment)
System Base   2.4.0 (Early deployment)
vSOP Support 4.1.0 4.2.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.6.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.2.0 - Early deployment

Release notes

  • Bugfix: Baseline 4 vSOP's could not connect to SMP's running on a vSOP (M19247)
  • Bugfix: Sometimes logging in to baseline 4 vSOP's was not possible (M19110)
  • Bugfix: Log rotation did not work on baseline 4 vSOP's (M19253)
  • Improvement: Don't restart networking when reinstalling the network module. This avoids having to restart all vSOP's. (M16897)
  • Feature: Add an unlimited number of routes on the vSOP (M18543)
  • Feature: Configurable guest install.ini with the vSOP profile (M18905)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

  • System Base
    • System Base v.2.4.0 Show release notes
      • Bugfix: SSH connection - Be more tolerant against network failures (M18135) - link
      • Bugfix: SSH connection - Try authentication with ECDSA and DSA key
      • Bugfix: Cluster synchronization broke prompt symlinks (M18867) - link
      • Improvement: Remove unused daemon process that caused memory issues (M19120) - link
      • Feature: Added local tasks support (M18513) - link
    • System Base v.2.3.1 (intermediate version) Show release notes
      • Bugfix: Remove unused packages causing network to restart slowly
      • Deprecated: Unused daemon process was causing high memory usage (M19120) - link
  • vSOP Support

New resource versions

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
Shell   2.1.1 (Early deployment)
SNMP Agent   4.1.2 (Early deployment)
Network   3.0.1 (Early deployment)
System Base 2.3.0 2.4.0 (Early deployment)
vSOP Support 4.0.6 4.1.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP 2.5.0 2.6.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.1.4 - Early deployment

Release notes

  • Improvement: Prevent bridging bond interface on slave interface (M18144)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

New resource versions

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
System Base   2.3.0 (Deprecated)
Shell   2.1.1 (Early deployment)
SNMP Agent   4.1.2 (Early deployment)
Network   3.0.1 (Early deployment)
vSOP Support 4.0.5 4.0.6 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
ReportSmpWebAudit   1.5
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.5.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.1.3 - Early deployment

Release notes

  • Bugfix: allow installation of baseline 4 VSOP's through templating
  • Improvement: install extra packages by default for baseline 4 VSOP's (M18679)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
System Base   2.3.0 (Deprecated)
Shell   2.1.1 (Early deployment)
SNMP Agent   4.1.2 (Early deployment)
Network   3.0.1 (Early deployment)
vSOP Support 4.0.4 4.0.5 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.5.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.1.2 - Early deployment

Release notes

  • Bugfix: VLAN's could not be used on bond interfaces (M18627)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

New resource versions

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
System Base   2.3.0 (Deprecated)
Shell   2.1.1 (Early deployment)
SNMP Agent   4.1.2 (Early deployment)
Network   3.0.1 (Early deployment)
vSOP Support 4.0.3 4.0.4 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP 2.4.0 2.5.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.1.1 - Deprecated

Release notes

  • Bugfix: IP forwarding was not disabled on a clean installation (M18552)
  • Bugfix: Some applications could not be loaded because of too strict permissions (M18560)
  • Deprecated: incorrect source of parameters for bonding interfaces
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

  • vSOP Support
    • vSOP Support v.4.0.3 Show release notes
      • Bugfix: Disabling IP forwarding only worked for hosts that were already installed and then upgraded (M18552) - link
      • Bugfix: Some applications could not be loaded because of too strict permissions (M18560) - link

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
System Base   2.3.0 (Deprecated)
Shell   2.1.1 (Early deployment)
SNMP Agent   4.1.2 (Early deployment)
Network   3.0.1 (Early deployment)
vSOP Support 4.0.2 4.0.3 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.4.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.1.0 - Deprecated

Release notes

  • Feature: Support network active-standby bonding interfaces (M17981)
  • Bugfix: Recovery user was not able to reset the admin password (M16945)
  • Bugfix: IP forwarding was enabled by default for all vSOP's (M18495)
  • Deprecated: incorrect source of parameters for bonding interfaces
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

  • Shell
    • Shell v.2.1.1 Show release notes
      • Bugfix: Using recovery user to modify admin password was not working (M16945) - link
      • Bugfix: The password hashes for users of the filemanager were never set properly (M17628) - link
  • Network
  • vSOP Support
    • vSOP Support v.4.0.2 Show release notes
      • Bugfix: Disable IP forwarding by default. (M18495) - link
      • Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: Manual actions are required for the changes to take effect. (M18495) - link

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support   2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
System Base   2.3.0 (Deprecated)
Shell 2.1.0 2.1.1 (Early deployment)
SNMP Agent   4.1.2 (Early deployment)
Network 2.1.0 3.0.1 (Early deployment)
vSOP Support 4.0.1 4.0.2 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.4.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.0.1 - Early deployment

Release notes

  • Bugfix: SNMP Agent module was not installing properly on HP hardware (M18329)
  • Bugfix: Baseline 3 vSOP console was not working after installation (M18212)
  • Bugfix: Raid contoller not working on DL360 G9 (M18115)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel   1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Network   2.1.0 (Early deployment)
Shell   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
RAID Support 2.0.0 2.1.0 (Early deployment)
Software sources   1.2.2 (Early deployment)
System Base   2.3.0 (Deprecated)
SNMP Agent 4.1.0 4.1.2 (Early deployment)
vSOP Support 4.0.0 4.0.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.4.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 4.0.0 - Early deployment

Release notes

  • Feature: Support installation of baseline 4 vSop's (M17686)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Please follow the specific procedure of the vSop Support module for version 4.0.0

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
RAID Support   2.0.0 (Early deployment)
SNMP Agent   4.1.0 (Early deployment)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
Kernel 1.2.1 1.3.0 (Early deployment)
NTP server   2.1.0 (Early deployment)
Network   2.1.0 (Early deployment)
Shell   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
Software sources   1.2.2 (Early deployment)
System Base   2.3.0 (Deprecated)
vSOP Support 3.0.0 4.0.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.4.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 3.0.1 - Deprecated

Release notes

  • Bugfix: Template upgrade always failed because of a missing context (M17709)
  • Deprecated: When you attempt to stop a vSop that did not start properly, the host shuts down instead
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Before upgrading to this release, run the MigrateProfileParameters task
Contact Escaux support when upgrading to this release for a manual action

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
RAID Support   2.0.0 (Early deployment)
SNMP Agent   4.1.0 (Early deployment)
Database Schema   3.1.1 (Early deployment)
Mail Server   2.0.1 (Early deployment)
vSOP Support   3.0.0 (Deprecated)
NTP server   2.1.0 (Early deployment)
Network   2.1.0 (Early deployment)
Shell   2.1.0 (Early deployment)
Watchdog   2.1.0 (Early deployment)
Database Server   4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
Software sources   1.2.2 (Early deployment)
Kernel   1.2.1 (Early deployment)
System Base   2.3.0 (Deprecated)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.4.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 3.0.0 - Deprecated

Release notes

  • Feature: Support eth2 on guest SOP (M17556)
  • Feature: Support bridging with third physical network interface (M17555)
  • Feature: Conversion to new profile parameter (M16417)
  • Bugfix: Install modules with APT (M17230)
  • Bugfix: Traffic was blocked on VSOP in private bridging mode (M17230)
  • Deprecated: Template upgrade always fails
  • Deprecated: When you attempt to stop a vSop that did not start properly, the host shuts down instead
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.7.0 (Optional: if you want to benefit from the vSOP resource template or the vSOP profile)

Special manual upgrade actions

Action
Before upgrading to this release, run the MigrateProfileParameters task
Contact Escaux support when upgrading to this release for a manual action

Changed components

Show changed components

New module versions

  • RAID Support
  • SNMP Agent
    • SNMP Agent v.4.1.0 Show release notes
      • Feature: Include finished calls passed during the last polling period in computation (M11435) - link
      • Feature: Support of Dahdi Trunk (M9308) - link
      • Feature: Support NodeJS api monitoring (M16185) - link
      • Feature: Convert plugins to new library model (M14774) - link
      • Improvement: Rating oriented probe to check connectivity (M13333) - link
      • Improvement: Rating oriented probe for monitoring daily rating (M13332) - link
      • Improvement: Support internal error in dialogic dsi probe (M13812) - link
      • Improvement: Improve dahdi probe for lua expression (M15598) - link
      • Improvement: Improve sip probe for lua expression (M13970) - link
      • Improvement: Generate Probe ID to support inheritance (M16035) - link
      • Bugfix: Fix false positive errors when installed on vsop (M12943) - link
      • Bugfix: Fixed error with dmidecode command on vsops (M0)
      • Bugfix: Support DL360 G9 and DL20 on baseline 3 (M15310) - link
      • Bugfix: Upgrade SNMP subsystem for HP hardware probes support (M15763) - link
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
    • SNMP Agent v.4.0.0 (intermediate version) Show release notes
      • Feature: Install packages using apt (M12365) - link
      • Feature: Add SNMP agents for monitoring HP hardware (M12556) - link
      • Feature: Added probe to monitor SOP cluster syncronization (M112522) - link
      • Improvement: SMPP queue monitoring (M11421) - link
      • Bugfix: Stopping snmpd on the vSOP host was causing the stop of snmpd on all vSOPs (M9792) - link
    • SNMP Agent v.3.13.1 (intermediate version) Show release notes
      • Bugfix: Monitor SMSC connection (M18019) - link
    • SNMP Agent v.3.13.0 (intermediate version) Show release notes
      • Feature: Support NodeJS api monitoring (M16185) - link
      • Improvement: Generate Probe ID to support inheritance (M16035) - link
      • Bugfix: Support multiple range of channels in dahdi monitoring (M17043) - link
      • Bugfix: HP DL20 Gen9 machine crashed when module was installed on baseline 2. Remove support for HP Gen9 hardware monitoring on baseline 2 (M17258) - link
      • Bugfix: Remove asterisk manager trace file (M17507) - link
    • SNMP Agent v.3.12.5 (intermediate version) Show release notes
      • Bugfix: Upgrade package version (M0)
    • SNMP Agent v.3.12.4 (intermediate version) Show release notes
      • Bugfix: Remove asterisk manager trace file (M17507)
      • Deprecated: Wrong package installed (M0)
    • SNMP Agent v.3.12.3 (intermediate version) Show release notes
      • Bugfix: Support multiple range of channels in dahdi monitoring (M17043)
  • Database Schema
    • Database Schema v.3.1.1 Show release notes
      • Improvement: Add custom CDR fields (usertag and usernote) (M13662)
    • Database Schema v.3.1.0 (intermediate version) Show release notes
      • Improvement: added columns needed for the rating of premium (M13999) - link
      • Bugfix: Decrease apply changes duration (M14120) - link
    • Database Schema v.3.0.0 (intermediate version) Show release notes
      • Feature: Install packages using apt (M12365) - link
      • Feature: Add some rating column in cdrdb.cdr (M12882)(M13353)(M13319) - link
      • Improvement: Better cache serialization of data (M13856) - link
    • Database Schema v.2.10.3 (intermediate version) Show release notes
      • Improvement: Added index on CDR's uniqueid (backport) (M19908)
    • Database Schema v.2.10.2 (intermediate version) Show release notes
      • Bugfix: SOP-SMP DB synchronization could fail (M16953)
    • Database Schema v.2.10.1 (intermediate version) Show release notes
      • Improvement: Add index on scr column in the cdr table (Backport) (M10292)
    • Database Schema v.2.10.0 (intermediate version) Show release notes
      • Feature: Possibility to optimize the tables (backport) (M10409)
      • Feature: Possibility to cleanup archived files (backport) (M10409)
    • Database Schema v.2.9.0 (intermediate version) Show release notes
      • Improvement: Add custom CDR fields (usertag and usernote) (Backport)(M13662)
      • Bugfix: Decrease apply changes duration on smp level (Backport) (M14120)
    • Database Schema v.2.8.0 (intermediate version) Show release notes
      • Improvement: Better cache serialization of data (Backport) (M13856)
    • Database Schema v.2.7.1 (intermediate version) Show release notes
      • Bugfix: The total allowable size for "labels" is not limited anymore to 255 characters (M12550)
      • Bugfix: Language in the translation catalog was truncated when defined regional language (M13109)
    • Database Schema v.2.7.0 (intermediate version) Show release notes
      • Improvement: Use correct encoding for instant messaging (M12334)
    • Database Schema v.2.6.0 (intermediate version) Show release notes
      • Feature: Support of HASH profile parameters (M11613)
      • Improvement: Increase e_mail and email size (M10727)
    • Database Schema v.2.5.0 (intermediate version) Show release notes
      • Improvement: Split instant inbox into multiple tables (M11185)
      • Feature: Allow to archive instant messages (M11193)
    • Database Schema v.2.4.0 (intermediate version) Show release notes
      • Feature: Link user feedback to internal bugtracker (M10490)
      • Bugfix: Increase attribute column size to 64 in attribute_state and attribute_log(M10714)
    • Database Schema v.2.3.1 (intermediate version) Show release notes
      • Bugfix: Increase attribute column size to 64 in attribute_state and attribute_log(M10714)
    • Database Schema v.2.3.0 (intermediate version) Show release notes
      • Feature: Added a user_feedback table in cdrdb (M9434)
      • Feature: New SMS API status in cdrdb (M8857)
      • Improvement: add field for more secure password storage (M6386)
      • Feature: Added tables for carddav caching (M9865)
      • Bugfix: default values could be incorrect when upgrading from a previous version and new options are available. (M10261)
    • Database Schema v.2.2.1 (intermediate version) Show release notes
      • Bugfix: Baseline 1 compatibility. (M10865)
    • Database Schema v.2.2.0 (intermediate version) Show release notes
      • Feature: Support new profile parameter types (M8737)
      • Feature: Support for roles (M8870)
      • Improvement: added indexes on home and mobile number fiels of the directory table (M8972)
      • Improvement: Increase size of accountcode to 255 characters (M9264)
      • Improvement: DB monitor process without limitation of records per day (M9079)
    • Database Schema v.2.1.1 (intermediate version) Show release notes
      • Improvement: Removed dependency on baseline 2. Profile parameters on baseline 1 are limited to 255 characters
      • Improvement: SyncCDRDB would not synchronize when reinstalling a SOP. (M8118)
      • Improvement: Reduce module installation time on high latency networks (M8766)
      • Bugfix: DB Monitor does not work correctly when history to keep is greater than 12 months (M8057)
      • Bugfix: Context not synced when swapping the name of two contexts (M8285)
      • Limitation: Profile parameters on baseline 1 are limited to 255 characters.
    • Database Schema v.2.1.0 (intermediate version) Show release notes
      • Feature: User column added to attribute log (M7502)
      • Improvement: Avoid starting the scheduled task at the same minute for each VSOP(M7978)
    • Database Schema v.2.0.0 (intermediate version) Show release notes
      • Improvement: Increased size of profile parameters from 255 to 1024 characters (also requires SMP >= 5.0.0) (M7885)
    • Database Schema v.1.28.0 (intermediate version) Show release notes
      • Bugfix: Increase size of account code field in CDR to 255 characters (M9264)
  • Mail Server
  • vSOP Support
    • vSOP Support v.3.0.0 Show release notes
      • Feature: Install packages using apt (M12751)
      • Improvement: Packaging update (M17230)
      • Bugfix: Traffic blocked on VSOP using firewall and private bridging (M17230)
      • Deprecated: When you attempt to stop a vSop that did not start properly, the host shuts down instead
  • NTP server
    • NTP server v.2.1.0 Show release notes
      • Improvement: Add firewall rule for NTP (M0)
      • Feature: Convert plugins to new library model (M14774) - link
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
    • NTP server v.2.0.0 (intermediate version) Show release notes
      • Feature: Install packages using apt (M12365) - link
      • Bugfix: There was a false error when installing on a vSOP (M12942) - link
  • Network
  • Shell
    • Shell v.2.1.0 Show release notes
      • Feature: Convert plugins to new library model (M14774) - link
      • Improvement: The default interface for the admin user is now the Escaux CLI instead of the SOP shell (M16256) - link
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade other modules too. The module documentation lists special upgrade actions for this version (M14774) - link
    • Shell v.2.0.0 (intermediate version) Show release notes
      • Feature: Install packages using apt (M12365) - link
    • Shell v.1.23.1 (intermediate version) Show release notes
      • Bugfix: Using recovery user to modify admin password was not working - backport (M16945)
      • Bugfix: The password hashes for users of the filemanager were never set properly - backport (M17628)
  • Watchdog
    • Watchdog v.2.1.0 Show release notes
      • Feature: Convert plugins to new library model (M14774) - link
      • Improvement: Code refactoring (M16555) - link
      • Improvement: Converted to APT (M16555) - link
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
    • Watchdog v.2.0.0 (intermediate version) Show release notes
      • Feature: Install packages using apt (M12365) - link
      • Bugfix: default values could be incorrect when upgrading from a previous version and new options are available.(M10261) - link
  • Database Server
    • Database Server v.4.2.0 Show release notes
      • Feature: Convert plugins to new library model (M14774) - link
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
    • Database Server v.4.1.1 (intermediate version) Show release notes
      • Deprecated: Debugging version.
    • Database Server v.4.1.0 (intermediate version) Show release notes
      • Bugfix: ODBC only allowed a single query at the time. (M14911) - link
    • Database Server v.4.0.0 (intermediate version) Show release notes
      • Feature: Install packages using apt (M12365) - link
      • Bugfix: Grants to write instant messages into the database were not written until tables were present (M0013589) - link
    • Database Server v.3.0.0 (intermediate version) Show release notes
      • Improvement: Enable FLAG_AUTO_RECONNECT option for LDAP dsn (M0004038)
      • Deprecated: Not intended for production (M0)
  • Software sources
  • System Base
    • System Base v.2.3.0 Show release notes
      • Bugfix: Coredumps appeared on the VSOP host filesystem instead of the VSOP filesystem (M16350) - link
      • Bugfix: Apply changes could remove configuration in some rare cases (M16800) - link
      • Bugfix: Remove obsolete public key (M16229) - link
      • Feature: Generate more complex passwords (M16373) - link
      • Deprecated: Unused daemon process was causing high memory usage (M19120) - link
    • System Base v.2.2.1 (intermediate version) Show release notes
      • Bugfix: Add mission version from packages (M0)
      • Bugfix: Restored the package escaux-evaluate (M0)
      • Deprecated: Adds an obsolete public key to the SOP (M16229) - link
    • System Base v.2.2.0 (intermediate version) Show release notes
      • Feature: Resource cleanup tool (M14313) - link
      • Improvement: Added the ability to rotate logs file hourly (M13315) - link
      • Bugfix: Coredumps were not generated in some cases (M13582) - link
      • Bugfix: When doing rollback the configuration files were not restored (M14238) - link
      • Deprecated: Adds an obsolete public key to the SOP (M16229) - link
    • System Base v.2.1.1 (intermediate version) Show release notes
      • Bugfix: Connection to the SMP could be lost when the module was downgraded to a version before 1.6.0 (M14760) - link
      • Deprecated: Adds an obsolete public key to the SOP (M16229) - link
    • System Base v.2.1.0 (intermediate version) Show release notes
      • Feature: Provide hooks when the SSH connection is starting or stopped (M12594) - link
      • Deprecated: Connection to the SMP could be lost when the module was downgraded to a version before 1.6.0 (M14760) - link
    • System Base v.2.0.0 (intermediate version) Show release notes
      • Feature: Install packages using apt (M12365) - link
      • Improvement: Move password generation to software sources module (M0)
      • Improvement: Move escaux-evaluate package to SOP Base module (M0)
      • Bugfix: Configuration management tool was not able to set a "0" value (M0)
      • Bugfix: There was a memory leak in the SMP connection daemon (M13481) - link
      • Deprecated: Adds an obsolete public key to the SOP (M16229) - link
    • System Base v.1.13.0 (intermediate version) Show release notes
      • Bugfix: Cluster synchronization broke prompt symlinks (M18867)
      • Improvement: Remove unused daemon process that caused memory issues (M19120)
      • Feature: Added local tasks support (Backport)(M18513)
    • System Base v.1.12.2 (intermediate version) Show release notes
      • Bugfix: Apply changes could remove configuration in some rare cases (M16800)
      • Bugfix: Remove obsolete public key (M16229)
      • Deprecated: Unused daemon process was causing high memory usage (M19120)

New resource versions

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
RAID Support 1.2.0 2.0.0 (Early deployment)
SNMP Agent 3.12.2 4.1.0 (Early deployment)
Database Schema 1.27.0 3.1.1 (Early deployment)
Mail Server 1.5.4 2.0.1 (Early deployment)
vSOP Support 2.3.2 3.0.0 (Deprecated)
NTP server 1.9.0 2.1.0 (Early deployment)
Network 1.23.2 2.1.0 (Early deployment)
Shell 1.23.0 2.1.0 (Early deployment)
Watchdog 1.5.0 2.1.0 (Early deployment)
Database Server 2.8.0 4.2.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
Software sources   1.2.2 (Early deployment)
Kernel   1.2.1 (Early deployment)
System Base 1.12.1 2.3.0 (Deprecated)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP 2.3.0 2.4.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.6.5 - Deprecated

Release notes

  • Bugfix: Some traffic was blocked on VSOP in private bridging (M17230)
  • Deprecated: When you attempt to stop a vSop that did not start properly, the host shuts down instead
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.6.0 (Optional: if you want to benefit from the vSOP resource template)

Special manual upgrade actions

Action
None

Changed components

Show changed components

New module versions

  • vSOP Support
    • vSOP Support v.2.3.2 Show release notes
      • Bugfix: Traffic blocked on VSOP using firewall and private bridging (M17230)
      • Deprecated: When you attempt to stop a vSop that did not start properly, the host shuts down instead

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   1.27.0
RAID Support   1.2.0 (Early deployment)
Network   1.23.2 (Early deployment)
Database Server   2.8.0 (Early deployment)
Mail Server   1.5.4 (Early deployment)
SOP Base   1.9.1 (Early deployment)
Shell   1.23.0 (Deprecated)
NTP server   1.9.0 (Early deployment)
Watchdog   1.5.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
SNMP Agent   3.12.2 (Early deployment)
Kernel   1.2.1 (Early deployment)
System Base   1.12.1 (Deprecated)
vSOP Support 2.3.1 2.3.2 (Deprecated)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP   2.3.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.6.4 - Early deployment

Release notes

  • Bugfix: Full network config when creating vSOP (M16625)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.6.0 (Optional: if you want to benefit from the vSOP resource template)

Special manual upgrade actions

Action
None

Changed components

Show changed components

New module versions

  • vSOP Support
    • vSOP Support v.2.3.1 Show release notes
      • Bugfix: Networking configuration was not fully generated on install (M16625)
      • Bugfix: Routes were not correctly generated (M9534)

New resource versions

  • VirtualSOP
    • VirtualSOP v.2.3.0 Show release notes
      • Feature: Support a third network interface (eth2) for vsops. (M15867) - link
      • Bugfix: Configuration was not generated when the ini file field was empty. (M16105) - link
    • VirtualSOP v.2.2.0 (intermediate version) Show release notes
      • Feature: It is now possible to create VSOP on a different SMP than where the host is located. The ini file of the SOP to be installed can be added to the VSOP resource. (M15271) - link
      • Deprecated: Configuration was not generated when the ini file field was empty (M16105) - link
    • VirtualSOP v.2.1.0 (intermediate version) Show release notes
      • Feature: Support bridging on host eth0 and eth1 for VSOP hosts installed in a VMware environment (M14029) - link
    • VirtualSOP v.2.0.3 (intermediate version) Show release notes

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   1.27.0
RAID Support   1.2.0 (Early deployment)
Network   1.23.2 (Early deployment)
Database Server   2.8.0 (Early deployment)
Mail Server   1.5.4 (Early deployment)
SOP Base   1.9.1 (Early deployment)
Shell   1.23.0 (Deprecated)
NTP server   1.9.0 (Early deployment)
Watchdog   1.5.0 (Early deployment)
Test SMP Connectivity   1.0.2 (Early deployment)
SNMP Agent   3.12.2 (Early deployment)
Kernel   1.2.1 (Early deployment)
System Base   1.12.1 (Deprecated)
vSOP Support 2.3.0 2.3.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)
VirtualSOP 2.0.2 2.3.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.6.3 - Early deployment

Release notes

  • Bugfix: Mail Server con use a lot of disk space (M14683)
  • Bugfix: Server could ran out of memory when the shell of a vSOP was used during the installation (M16256)
  • Improvement: cli is default shell during the installation of the vSOP (M16258)
  • Bugfix: Coredumps of the vSOP were actually written on the vSOP Host (M16350)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.6.0 (Optional: if you want to benefit from the vSOP resource template)

Special manual upgrade actions

Action
None

Changed components

Show changed components

New module versions

  • Mail Server
    • Mail Server v.1.5.4 Show release notes
      • Bugfix: Disk space issue caused by local mailboxes (Backport)(M14683)
      • Bugfix: Force secure mode as default (Backport)(M14683)
  • Test SMP Connectivity
  • vSOP Support
    • vSOP Support v.2.3.0 Show release notes
      • Feature: Support a third network interface (eth2) for vsops (M15867)
      • Bugfix: The administrative user of a VSOP was no longer able to log in through SSH (M16258)
      • Bugfix: The Escaux SOP shell was not working on the VSOP console (M16256)
  • System Base
    • System Base v.1.12.1 Show release notes
      • Bugfix: Coredumps appeared on the VSOP host filesystem instead of the VSOP filesystem (M16350)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.12.0 (intermediate version) Show release notes
      • Feature: Added support of extended speeddials in Fusion 3 (M15395)
      • Bugfix: Installation of apt modules issue when mixed with non apt(Backport) (M14760)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.11.0 (intermediate version) Show release notes
      • Feature: Resource cleanup tool (M14313)
      • Improvement: Added the ability to rotate logs file hourly (Backport) (M13315)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Localization   1.1.2 (Deprecated)
Database Schema   1.27.0
RAID Support   1.2.0 (Early deployment)
Network   1.23.2 (Early deployment)
Database Server   2.8.0 (Early deployment)
Mail Server   1.5.4 (Early deployment)
SOP Base   1.9.1 (Early deployment)
Shell   1.23.0 (Deprecated)
NTP server   1.9.0 (Early deployment)
Watchdog   1.5.0 (Early deployment)
Test SMP Connectivity 1.0.0 1.0.2 (Early deployment)
SNMP Agent   3.12.2 (Early deployment)
Kernel   1.2.1 (Early deployment)
vSOP Support 2.2.0 2.3.0 (Early deployment)
System Base 1.10.1 1.12.1 (Deprecated)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
VirtualSOP   2.0.2 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.6.2 - Early deployment

Release notes

  • Improvement: Removed Raid Status probe since it overlaps the HP Hardware probe (M15980)
  • Bugfix: Kernel module installation would fail if System Base was not installed (M15980)
  • Bugfix: Network reconfiguration was slow (M14596)
  • Bugfix: Template vSOp resource was generating a dummy vSOP (M15980)
  • Bugfix: HP Hardware probe were not working on HP ProLiant older than G9 (M15980)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.6.0 (Optional: if you want to benefit from the vSOP resource template)

Special manual upgrade actions

Action
The Shell module needs to be installed twice when upgrading from a version lower than 2.6.0
the hardware probe for exporting monitoring alarms, you can manually add the previous probes again |
If you are running an old Kernel, this one will be upgraded. A reboot of the SOP will be required before being able to install the other modules

Changed components

Show changed components

New module versions

  • Network
    • Network v.1.23.2 Show release notes
      • Bugfix: The SMP connection were not reset properly after teh network reconfiguration, causing a long reconnection time (M14596)
    • Network v.1.23.0 (intermediate version) Show release notes
      • Feature: Missing IP aliases parameter for eth2 (M9960)
    • Network v.1.22.0 (intermediate version) Show release notes
      • Bugfix: Routes were not generated properly on standalone sops (M9262)
      • Bugfix: E-mail to fax does not work in some cases (M9201)
      • Feature: Support for eth2 (M9606)
    • Network v.1.21.1 (intermediate version) Show release notes
      • To the person thinking of deploying this module to ED: The network module has been a source of headache for our support team as it has been riddled with bugs. Before you deploy it to ED, make sure
      • - you have tested it with ALL currently supported baselines/kernels
      • - you verify that the interfaces are correctly configured and that the routes are set
      • - the documentation is complete
      • - the dependencies are complete and correct
      • -- JMA 20140910
      • Bugfix: Routes were not generated properly on standalone sops (M9262) - link
      • BUgfix: Correctly generate /etc/hosts file to make sudo command work correctly (M9201) - link
    • Network v.1.21.0 (intermediate version) Show release notes
      • Feature: Added the possibility to configure IP aliases on ethX interfaces.
      • Deprecated: Routes not correctly configured on a standalone sop (M9262)
  • SNMP Agent
  • Kernel

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Schema   1.27.0
RAID Support   1.2.0 (Early deployment)
System Base   1.10.1 (Deprecated)
Network 1.20.1 1.23.2 (Early deployment)
Database Server   2.8.0 (Early deployment)
vSOP Support   2.2.0 (Early deployment)
SOP Base   1.9.1 (Early deployment)
Shell   1.23.0 (Deprecated)
NTP server   1.9.0 (Early deployment)
Watchdog   1.5.0 (Early deployment)
SNMP Agent 3.12.1 3.12.2 (Early deployment)
Kernel 1.2.0 1.2.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
VirtualSOP   2.0.2 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.6.1 - Early deployment

Release notes

  • Bugfix: Upgrade of the SNMP Agent module was failing (M15964)
  • Deprecated: INstallation would fail on HP ProLiant older than G9 (M15980)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.6.0 (Optional: if you want to benefit from the vSOP resource template)

Special manual upgrade actions

Action
The Shell module needs to be installed twice when upgrading from a version lower than 2.6.0
the hardware probe for exporting monitoring alarms, you can manually add the previous probes again |
If you are running an old Kernel, this one will be upgraded. A reboot of the SOP will be required before being able to install the other modules

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Schema   1.27.0
Network   1.20.1
RAID Support   1.2.0 (Early deployment)
System Base   1.10.1 (Deprecated)
Database Server   2.8.0 (Early deployment)
Kernel   1.2.0 (Early deployment)
vSOP Support   2.2.0 (Early deployment)
SOP Base   1.9.1 (Early deployment)
Shell   1.23.0 (Deprecated)
NTP server   1.9.0 (Early deployment)
Watchdog   1.5.0 (Early deployment)
SNMP Agent 3.12.0 3.12.1 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
VirtualSOP   2.0.2 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.6.0 - Deprecated

Release notes

  • Realease date: 16/08/2016
  • Feature: Used new HP Hardware probe in order to properly support HP Hardware monitoring (M14789)
  • Bugfix: the installation of the shell module was failing (M15715)
  • Bugfix: Admin user was not able to stop/restart a vSOP (M14973)
  • Bugfix: Upgraded the kernel to fix spontaneous reboot issues (M13387)
  • Bugfix: Ethernet probes were not configured properly (M15470)
  • Bugfix: Disk probes were not configured properly (M15470)
  • Bugfix: Root access was open (M14788)
  • Bugfix: vSOP Template upgrade could break vSOPs' connection with the SMP (M14760)
  • Bugfix: Admin access to shell was not working for many menus (M14774)
  • Limitation: To get admin access to the vSOP a restart of this one could be required
  • Limitation: Because of the migration to the HP Hardware probe the syslog sent by the BMS and the SOP OID have changed
  • Deprecated: Upgrade of SNMP Agent is failing (M15964)
  • Dependency:
    • Monitoring Service module >= 2.0.1 installed on the BMS
    • Baseline >= 3.0.0
    • SMP >= 5.6.0 (Optional: if you want to benefit from the vSOP resource template)

Special manual upgrade actions

Action
The Shell module needs to be installed twice when upgrading from a version lower than 2.6.0
The hardware probes have been replaced by a dedicated HP-hardware probe. In case you rely on the ID of the hardware probe for exporting monitoring alarms, you can manually add the previous probes again
If you are running an old Kernel, this one will be upgraded. A reboot of the SOP will be required before being able to install the other modules

Changed components

Show changed components

New module versions

  • System Base
    • System Base v.1.10.1 Show release notes
      • Bugfix: Some scripts were not executable causing them to fail (M14144)
      • Bugfix: Coredumps were not created in some cases (M13582)
      • Bugfix: When doing rollback the configuration files were not restored (M14238)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
  • Database Server
    • Database Server v.2.8.0 Show release notes
      • Feature: Convert plugins to new library model (M14774)
      • Bugfix: ODBC only allowed a single query at the time. (M14911)
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
    • Database Server v.2.7.1 (intermediate version) Show release notes
      • Bugfix: Grants to write instant messages into the database were not written until tables were present (M13589)
    • Database Server v.2.7.0 (intermediate version) Show release notes
      • Bugfix: Use correct encoding for IM (M12334)
    • Database Server v.2.6.0 (intermediate version) Show release notes
      • Feature: Added shell plugin to restore database backup (M0)
    • Database Server v.2.5.0 (intermediate version) Show release notes
      • Improvement: Use escaux-minutely for minutely cronjobs (M7759)
      • Improvement: Reduce module installation time on high latency networks (M8766)
    • Database Server v.2.4.1 (intermediate version) Show release notes
      • Bugfix: do not write parent DB password to child SMP's database.ini (MS-299)
    • Database Server v.2.4.0 (intermediate version) Show release notes
      • Feature: Add administrative user to manage databases.
      • Feature: Automatically repair crashed tables when the database server starts up. (M6858)
      • Potential update impact level 2 DONE: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: New default behaviour is to automatically check and repair all databases. This can considerably increase startup time when it is used on large databases. Some applications may behave erratically while this check is running.
    • Database Server v.2.3.3 (intermediate version) Show release notes
      • Bugfix: Fixed symbolic link issue of libhtml-template-perl package (M0)
    • Database Server v.2.3.2 (intermediate version) Show release notes
      • Improvement: Backport of Database Restore shell plugin (M0)
  • Kernel
  • vSOP Support
    • vSOP Support v.2.2.0 Show release notes
      • Improvement: Upon installation of the vSOP the host sopkey and the container resource are written into the file system of the guest. (M0015271)
      • Bugfix: admin user was unable to access vSOP console created by root and vice-versa. (M14973)
      • Bugfix: Shared memory space was not accessible on baseline 3 vsops (M15885)
    • vSOP Support v.2.1.1 (intermediate version) Show release notes
      • Bugfix: The SMP connection of the VSOP was lost when a version before 2.0.0 of the System Base module was installed. (M14760)
  • SOP Base
  • Shell
    • Shell v.1.23.0 Show release notes
      • Feature: Convert plugins to new library model (M14774)
      • Bugfix: Shell plugins were not accessible for escaux user (M13994)
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade other modules too. The module documentation lists special upgrade actions for this version (M14774)
      • Deprecated: Login on Fileman was no more possible (M17628)
    • Shell v.1.22.1 (intermediate version) Show release notes
      • Bugfix: Shell plugins were not accessible for escaux user (M13994)
      • Bugfix: The module was not installed properly (M14665)
    • Shell v.1.22.0 (intermediate version) Show release notes
      • Bugfix: Possibly shell injection issues fixed. (M12681)
      • Feature: Added ll, grep and free command. (M12681)
      • Bugfix: Access to unauthorized files prevented. (M12681)
      • Feature: Allow some options for disk_usage, grep, free. (M12681)
      • Feature: Added uptime information to system_info. (M12681)
      • Feature: Allowed access to /tftpboot/ * and /etc/crond.d/ * files from sopcli (M12681)
      • Bugfix: Add escaux shell to shells list (M13125)
      • Deprecated: Shell plugins were not accessible for escaux user (Backport)(M13994)
  • NTP server
    • NTP server v.1.9.0 Show release notes
      • Feature: Convert plugins to new library model (M14774)
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
    • NTP server v.1.8.3 (intermediate version) Show release notes
      • Bugfix: Removed false error when installing on a vSOP (M12492)
    • NTP server v.1.8.2 (intermediate version) Show release notes
      • Improvement: Use iburst for faster initial NTP sync (M4620)
      • Bugfix: Shell plugin was not able to resync NTP correctly (M4620)
      • Improvement: Reduce module installation time on high latency networks (M8766)
  • Watchdog
    • Watchdog v.1.5.0 Show release notes
      • Feature: Convert plugins to new library model (M14774)
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
  • SNMP Agent
    • SNMP Agent v.3.12.0 Show release notes
      • Feature: Convert plugins to new library model (M14774)
      • Improvement: Improve dahdi probe for lua expression (M15598)
      • Improvement: Improve sip probe for lua expression (M13970)
      • Bugfix: Upgrade SNMP subsystem for HP hardware probes support (M15763)
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded (M14774)
      • Deprecated: Upgrade from previous version is failing on Baseline 3 (M15964)
    • SNMP Agent v.3.11.2 (intermediate version) Show release notes
      • Bugfix: SNMP agent was not restarted when it crashed and the machine was in standby mode (PC-1142)
    • SNMP Agent v.3.11.1 (intermediate version) Show release notes
      • Improvement: Improve sip probe for lua expression (backport) (M13970)
      • Bugfix: probe were not working on ProLiant older than G9 (backport) (M15980)
    • SNMP Agent v.3.11.0 (intermediate version) Show release notes
      • Bugfix: Support DL360 G9 and DL20 (M15310)
      • Deprecated: The installation could fail on some type of Server (M0)
    • SNMP Agent v.3.10.0 (intermediate version) Show release notes
      • Feature: Include finished calls passed during the last polling period in computation (M11435)
      • Feature: Support of Dahdi Trunk (M9308)
      • Bugfix: Fix false positive errors when installed on vsop (backport)(M12943)

New resource versions

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Schema   1.27.0
Network   1.20.1
RAID Support   1.2.0 (Early deployment)
System Base 1.10.0 1.10.1 (Deprecated)
Database Server 2.3.1 2.8.0 (Early deployment)
Kernel   1.2.0 (Early deployment)
vSOP Support 2.1.0 2.2.0 (Early deployment)
SOP Base 1.9.0 1.9.1 (Early deployment)
Shell 1.21.1 1.23.0 (Deprecated)
NTP server 1.8.1 1.9.0 (Early deployment)
Watchdog 1.4.1 1.5.0 (Early deployment)
SNMP Agent 3.9.0 3.12.0 (Deprecated)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
HP Hardware   1.0.0 (Early deployment)
VirtualSOP   2.0.2 (Early deployment)
Ethernet Traffic   1.0.2 (Early deployment)
Power Supplies Temperature   3.0.0 (Early deployment)
Power Supplies Redundancy   2.0.0 (Early deployment)
Fans   2.0.0 (Early deployment)
Ambient Temperature   2.0.0 (Early deployment)
CPU Temperature   2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.5.0 - Early deployment

Release notes

  • Release date: 18/03/2016
  • Feature: Upgraded the Vsop support module to automatically generate a root password (M11947)
  • Feature: Added watchdog to automatically restart crashed processes (M13094)
  • Improvement: Upgraded SOP Base to reduce load of scheduled jobs (M9887)
  • Improvement: The Generic CPU Usage probe thresholds are not dependant on the hardware anymore (M13016)
  • Improvement: Upgraded RAID support to be able to manage the raid controller and disks without reboot (M9646)
  • Improvement: Upgraded all hardware probes to avoid on hardware checks (M12556)
  • Improvement: Upgraded the System Base module to balance IRQs over available CPUs (M12781)
  • Bugfix: Updated Ethernet probe to ignore ethernet traffic of vSOPs (M10471)
  • Bugfix: Upgraded SNMP agent as stopping snmpd on the vSOP host was causing the stop of snmpd on all vSOPs (M9792)
  • Bugfix: Updated the vSOP resource to avoid quota errors after an apply changes (M12531)
  • Bugfix: Updated the Vsop support module to remove false errors at installation time (M12532)
  • Bugfix: Upgraded system base to fix memory leak issue (M13481)
  • Dependency:
    • SMP >= 5.6.0 (Optional: if you want to benefit from the vSOP resource template)
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
A reboot of the SOP is required

Changed components

Show changed components

New module versions

  • SOP Base
  • Watchdog
    • Watchdog v.1.4.1 Show release notes
      • Bugfix: default values could be incorrect when upgrading from a previous version and new options are available.(Backport) (M10261)
  • vSOP Support
    • vSOP Support v.2.1.0 Show release notes
      • Improvement: Have uniquely generated passwords for administrative accounts (M11517)
      • Improvement: Have a human readable output of the estimated size when exporting a VSOP (M0)
      • Bugfix: Error message about xfs package missing on baseline 2 (while xfs is not supported there) (M0)
      • Bugfix: Cleanup false positive error messages during installation (M12532)
      • Feature: Add new software repository to vsop installation (M12594)
    • vSOP Support v.2.0.3 (intermediate version) Show release notes
      • Bugfix: Removed XFS prog package in Lucid (M0)
  • RAID Support
  • System Base
    • System Base v.1.10.0 Show release notes
      • Improvement: Move password generation to software sources module (Backport) (M0)
      • Bugfix: Configuration management tool was not able to set a "0" value (Backport) (M0)
      • Bugfix: There was a memory leak in the SMP connection daemon (Backport) (M13481)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.9.0 (intermediate version) Show release notes
      • Improvement: Added irqbalance daemon to spread interrupts across available CPU's (M12781)
      • Bugfix: SOP based template processor did not work with new profile parameters (M12845)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.8.2 (intermediate version) Show release notes
      • Bugfix: DB sync could failed when syncing parameter values (M12762)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.8.1 (intermediate version) Show release notes
      • Bugfix: Included libtest-requires-perl dependency for libtest-sharedfork-perl (M0)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.8.0 (intermediate version) Show release notes
      • Feature: Provide better password management through a tool (M11517)
      • Bugfix: Fixed CVE-2014-0224 and CVE-2015-1793
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.7.1 (intermediate version) Show release notes
      • Bugfix: SSL/TLS weak MAC algorithms disabled (M11658)
      • Bugfix: SSL/TLS server CBC mode ciphers disabled (M11658)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.7.0 (intermediate version) Show release notes
      • Feature: Support for SHA-2 when using STARTTLS (M11519)
      • Bugfix: Upgraded OpenSSL to the latest version (M11273)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.6.0 (intermediate version) Show release notes
      • Feature: Dynamic start of ssh connection (M9996)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.5.0 (intermediate version) Show release notes
      • Feature: CGIRPC - Implements parallel GET request with asynchronous HTTP library (M9135)
      • Bugfix: Fixed installation issue when the logfile was not present - clean install (M0)
      • Improvement: added up to date version of compression library (M0)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.4.5 (intermediate version) Show release notes
      • Bugfix: Dependency issue with baseline 2.6 (M23979)
    • System Base v.1.4.4 (intermediate version) Show release notes
      • Bugfix: Fixed installation issue when the logfile was not present (clean install)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.4.3 (intermediate version) Show release notes
      • Bugfix: It was not possible to create a resource which was not linked to an extension (M9413)
      • Bugfix: PUM login/logout could fail when executed via a callflow
      • Deprecated: the installation was aborded when no log file was present (clean install)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.4.2 (intermediate version) Show release notes
      • Bugfix: fix warning log output of a library
      • Bugfix: Apply changes when configuring resources sharing the same MAC address failed (M9346)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.4.1 (intermediate version) Show release notes
      • Bugfix: Added support for ESCAUX template language to PUM. (M8822)
      • Bugfix: SopSyncFastDBSync now processes tables in the correct order (M9004)
      • Deprecated: Apply changes when configuring resources sharing the same MAC address failed (M9346)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.4.0 (intermediate version) Show release notes
      • Feature: Support for "SopSyncFastDBSync" to do the db sync queries locally on the sop which is especially important on high latency networks (M0008524)
      • Improvement: Reduce module installation time on high latency networks (M8766)
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
    • System Base v.1.3.3 (intermediate version) Show release notes
      • Bugfix: For REDACTED (MS-128)
    • System Base v.1.3.2 (intermediate version) Show release notes
      • Bugfix: Package installation could block on an interactive question on Baseline 3.
      • Deprecated: Adds an obsolete public key to the SOP (M16229)
  • SNMP Agent
    • SNMP Agent v.3.9.0 Show release notes
      • Feature: Rating oriented probe to check connectivity (M13333)
      • Feature: Rating oriented probe for monitoring daily rating (M13332)
      • Improvement: Support internal error in Dialogic DSI probe (M13812)
      • Bugfix: SNMP agent not restarting on vHost if other instances already running in vSOPs (M14218)
    • SNMP Agent v.3.8.1 (intermediate version) Show release notes
      • Bugfix: Fixed error with dmidecode command on vsops (M0)
    • SNMP Agent v.3.8.0 (intermediate version) Show release notes
      • Feature: Add SNMP agents for monitoring HP hardware (Backport) (M12556)
      • Feature: Added probe to monitor SOP cluster syncronization (Backport) (M112522)
      • Improvement: SMPP queue monitoring (Backport) (M11421)
      • Bugfix: Stopping snmpd on the vSOP host was causing the stop of snmpd on all vSOPs (Backport) (M9792)

New resource versions

  • VirtualSOP
  • Ethernet Traffic
  • Power Supplies Temperature
    • Power Supplies Temperature v.3.0.0 Show release notes
      • Feature: Monitor component through SNMP (M12556)
      • Limitation: In case of temperature alert in another hardware component, this probe will generate an alert even if said component is not monitored. (M12556)
    • Power Supplies Temperature v.2.0.0 (intermediate version) Show release notes
      • Feature: display the max value reported by sensors (M0)
      • Deprecated: Superseded by the HP Hardware probe. Please use that one where possible (M12556)
    • Power Supplies Temperature v.1.1.2 (intermediate version) Show release notes
      • Improvement: Make the line more visible in graph
      • Bugfix: Made the probe run on both active and standby sop (M9172) - link
      • Deprecated: Superseded by the HP Hardware probe. Please use that one where possible (M12556) - link
  • Power Supplies Redundancy
    • Power Supplies Redundancy v.2.0.0 Show release notes
      • Feature: Monitor component through SNMP (M12556)
    • Power Supplies Redundancy v.1.2.2 (intermediate version) Show release notes
      • Bugfix: Made the probe run on both active and standby sop (M9172)
      • Deprecated: Superseded by the HP Hardware probe. Please use that one where possible (M12556)
  • Fans
  • Ambient Temperature
    • Ambient Temperature v.2.0.0 Show release notes
      • Feature: Monitor component through SNMP (M12556)
      • Limitation: In case of temperature alert in another hardware component, this probe will generate an alert even if said component is not monitored. (M12556)
    • Ambient Temperature v.1.1.2 (intermediate version) Show release notes
      • Improvement: Made line in graph more visible
      • Bugfix: Made the probe run on both active and standby sop (M9172)
      • Deprecated: Superseded by the HP Hardware probe. Please use that one where possible (M12556)
  • CPU Temperature
    • CPU Temperature v.2.0.0 Show release notes
      • Feature: Monitor component through SNMP (M12556)
      • Limitation: In case of temperature alert in another hardware component, this probe will generate an alert even if said component is not monitored. (M12556)
    • CPU Temperature v.1.1.2 (intermediate version) Show release notes
      • Improvement: Made line more visible in graph
      • Bugfix: Made the probe run on both active and standby sop (M9172)
      • Deprecated: Superseded by the HP Hardware probe. Please use that one where possible (M12556)
  • Generic CPU Usage

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
Database Schema   1.27.0
Network   1.20.1
SOP Base 1.8.3 1.9.0 (Deprecated)
Watchdog   1.4.1
Shell   1.21.1 (Early deployment)
vSOP Support 2.0.2 2.1.0 (Early deployment)
RAID Support 1.1.1 1.2.0 (Early deployment)
System Base 1.3.1 1.10.0 (Deprecated)
SNMP Agent 3.7.1 3.9.0 (Early deployment)

Resources

Resource Previous release version Version
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 2.0.1 2.0.2 (Early deployment)
Ethernet Traffic 1.0 1.0.2 (Early deployment)
Power Supplies Temperature 1.1.1 3.0.0 (Early deployment)
Power Supplies Redundancy 1.2.1 2.0.0 (Early deployment)
Fans 1.1.1 2.0.0 (Early deployment)
Ambient Temperature 1.1.1 2.0.0 (Early deployment)
CPU Temperature 1.1.1 2.0.0 (Early deployment)
Generic CPU Usage   1.1.0 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.4.3 - Early deployment

Release notes

* Bugfix: Apply change after removing one vSop won't remove them all anymore. (M12291)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
A reboot of the SOP is required

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
Database Schema   1.27.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3
Network   1.20.1
RAID Support   1.1.1
Shell   1.21.1 (Early deployment)
SNMP Agent   3.7.1 (Early deployment)
vSOP Support 2.0.1 2.0.2 (Early deployment)

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1 (Deprecated)
Power Supplies Temperature   1.1.1 (Deprecated)
Power Supplies Redundancy   1.2.1 (Deprecated)
Fans   1.1.1 (Deprecated)
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP   2.0.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.4.2 - Deprecated

Release notes

  • Bugfix: Packages of baseline 3 were missing for snmp agent (M0)
  • Deprecated: Apply change after removing 1 vSop removes them all. (M12291)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
None

Changed components

Show changed components

New module versions

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
Database Schema   1.27.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3
Network   1.20.1
vSOP Support   2.0.1 (Deprecated)
RAID Support   1.1.1
Shell   1.21.1 (Early deployment)
SNMP Agent 3.7.0 3.7.1 (Early deployment)

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1 (Deprecated)
Power Supplies Temperature   1.1.1 (Deprecated)
Power Supplies Redundancy   1.2.1 (Deprecated)
Fans   1.1.1 (Deprecated)
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP   2.0.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.4.1 - Deprecated

Release notes

  • Bugfix: Probes sometimes blocked, creating a high load (M11688)
  • Deprecated: Packages of baseline 3 were missing for snmp agent (M0)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
A reboot of the SOP is required

Changed components

Show changed components

New module versions

  • SNMP Agent
    • SNMP Agent v.3.7.0 Show release notes
      • Improvement: Probes will never run longer than a fixed time anymore (M11688)
      • Deprecated: Missing system dependencies
    • SNMP Agent v.3.6.1 (intermediate version) Show release notes
      • Feature: Added synchronization check into mysql replication probe. (M11456)
      • Improvement: Some probes will not report error on vsop. (M11109)

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
Database Schema   1.27.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3
Network   1.20.1
vSOP Support   2.0.1 (Deprecated)
RAID Support   1.1.1
Shell   1.21.1 (Early deployment)
SNMP Agent 3.6.0 3.7.0 (Deprecated)

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1 (Deprecated)
Power Supplies Temperature   1.1.1 (Deprecated)
Power Supplies Redundancy   1.2.1 (Deprecated)
Fans   1.1.1 (Deprecated)
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP   2.0.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.4.0 - Deprecated

Release notes

  • Feature: Multiple guests can now have the same VLAN ID on one single host (M11724)
  • Bugfix: Upgraded shell to version 1.21.1 to make sure the password can be changed through the shell (M9008)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
Update the vsop resources to version 2.0.1. Starting from SMP 5.6.X
Make the resource inherit from the template resource to avoid having to update manually in the future
A reboot of the SOP is required

Changed components

Show changed components

New module versions

  • vSOP Support
    • vSOP Support v.2.0.1 Show release notes
      • Bugfix: VSOP files are well deleted when corresponding resources are deleted on SMP (M9857)
      • Bugfix: Fixed missing /run/lock folder in baseline 3 (M11660)
      • Deprecated: Apply changes removes all VSOPs on host when part of cluster (M12291)
    • vSOP Support v.2.0.0 (intermediate version) Show release notes
      • Feature: Support hard disk quota for vSOPs with XFS
      • Feature: Support for multiple guests with same VLAN ID on same host. (M8403)
    • vSOP Support v.1.3.0 (intermediate version) Show release notes
      • Feature: Export and import of VSOP data (M8293)
  • Shell
    • Shell v.1.21.1 Show release notes
      • Bugfix: Not possible to change the password in local admin password module on Baseline 3 (M9008)
      • Bugfix: Removed the ability to shutdown or reboot sop via shortcut command (M11392)
      • Bugfix: Full length of the password is now checked on Baseline 2 and 1 (M11476)
    • Shell v.1.21.0 (intermediate version) Show release notes
      • Improvement: Capture traffic on all interfaces (M11125)
    • Shell v.1.20.0 (intermediate version) Show release notes
      • Feature: Added diagnostic tools to CLI: system_info ntp_check_sync ntp_resync run_date trace disk_usage (M10394)
    • Shell v.1.19.1 (intermediate version) Show release notes
      • Improvement: Removed ambiguous version number displayed in the shell interface (M8271)
    • Shell v.1.19.0 (intermediate version) Show release notes
      • Feature: Added diagnostic tools to CLI: arp cat dpkg_list dpkg_list_escaux dump_to_sftp less ls netstat nslookup ping probe_list probe_run probe_run_all ps pstree ssh telnet top traceroute (M9049)
    • Shell v.1.18.0 (intermediate version) Show release notes
      • Bugfix: Display correct version number (M8271)
    • Shell v.1.17.0 (intermediate version) Show release notes
      • Bugfix: Keyboard was not configured correctly on Baseline 3 with SOPShell (M8075)
      • Bugfix: The feature to configure eth1 could make the Shell unusable on small screens. It was removed. (M8068)
      • Feature: Added keyboard configuration to SOPCli (M8075)
      • Bugfix: Permissions were not correctly set on capture files (M7554)
      • Improvement: Reduce module installation time on high latency networks (M8766)

New resource versions

  • MigrateProfileParameters
  • VirtualSOP
    • VirtualSOP v.2.0.1 Show release notes
      • Bugfix: Only last VLAN defined was taken into account
    • VirtualSOP v.2.0.0 (intermediate version) Show release notes
      • Feature: Support for multiple guests with same VLAN ID on same host. (M8403)
    • VirtualSOP v.1.2.0 (intermediate version) Show release notes
      • Bugfix: VSOP installation behaves properly when ETL is used (M7769)
      • Improvement: Clarified guest/host eth0/1 configuration
      • Limitation: On the same physical host, each vlan id can only be used by one vSOP at a time (M8403)
      • Feature: Support hard disk limit with quota on XFS (M8265)
      • Improvement: Allow mounting SSHFS on VSOPs (M9203)
      • Feature: Added support for Fax Server in VSOP. (M9769)
      • Limitation: cannot install more than 1 vSOP resource with the same VLAN ID (M8404)

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
Database Schema   1.27.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3
Network   1.20.1
SNMP Agent   3.6.0
vSOP Support 1.2.0 2.0.1 (Deprecated)
RAID Support   1.1.1
Shell 1.16.0 1.21.1 (Early deployment)

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1 (Deprecated)
Power Supplies Temperature   1.1.1 (Deprecated)
Power Supplies Redundancy   1.2.1 (Deprecated)
Fans   1.1.1 (Deprecated)
MigrateProfileParameters   1.0.0 (Early deployment)
VirtualSOP 1.1.2 2.0.1 (Early deployment)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.3.0 - Early deployment

Release notes

  • Improvement: Upgraded SNMP agent module (M0)
  • Improvement: Upgraded the RAID support module (M0)
  • Bugfix: Updated the vsop resource to avoid getting LUA code in the install.ini file (M0)
  • Bugfix: Upgraded the SOPshell to avoid resetting passwords (M9008)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
Update the vsop resources to version 1.1.2. Optionally, you can make the resource inherit from the template resource to avoid having to update manually in the future
A reboot of the SOP is required

Changed components

Show changed components

New module versions

  • SNMP Agent
    • SNMP Agent v.3.6.0 Show release notes
      • Feature: Support monitoring interface status for Sangoma PRI interfaces (M10388)
      • Feature: Generic Callflow monitoring probe (M10262)
      • Feature: Add probe for SMPP server (M10309)
      • Improvement: Restart SNMP daemon when it has crashed (M10376)
      • Improvement: Critical message for the DB Consistency probe (M0)
      • Bugfix: Fix level computation issue and add more information in the message (M9647)
      • Bugfix: vsop memory probe shows no graphs (actually it does but the limit is so high that the used is scaled down to become invisible) (M0)
      • Bugfix: Generic CPU probe was not accurate on vSOPs (M0)
      • Bugfix: The power supply temperature probe was not working properly on some HP DL360 G8 (M0)
    • SNMP Agent v.3.5.1 (intermediate version) Show release notes
      • Bugfix: Fix level computation issue and add more information in the message (M9647)
    • SNMP Agent v.3.5.0 (intermediate version) Show release notes
      • Feature: New probe to monitor the Dialogic stack (M9647)
      • Bugfix: Incorrect swap value for generic (vsop) memory probe (M9946)
      • Bugfix: Clean the file probe_oids when no probes are configured (M9816)
    • SNMP Agent v.3.4.6 (intermediate version) Show release notes
      • Bugfix: Hardware monitoring of HP Gen9 servers was not working on baseline3 (M24174)
    • SNMP Agent v.3.4.5 (intermediate version) Show release notes
      • Bugfix: Compatibility with HP Gen9 servers (M19021)
      • Potential update impact level 1 DONE: no critical impact expected. Update can be applied without risk of breaking critical functionality.: This removes support for monitoring of the Power Supply Temperatures (M19021)
    • SNMP Agent v.3.4.4 (intermediate version) Show release notes
      • Bugfix: PRI probe for Sangoma NetBorder PRI interfaces could only monitor the first interface (M9634)
    • SNMP Agent v.3.4.3 (intermediate version) Show release notes
      • Feature: Support for monitoring Sangoma NetBorder BRI interfaces (M8718)
      • Bugfix: PRI probe for Sangoma NetBorder PRI interfaces was not working (M9204)
  • RAID Support

New resource versions

  • VirtualSOP

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
vSOP Support   1.2.0
Database Schema   1.27.0
Shell   1.16.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3
Network   1.20.1
SNMP Agent 3.4.2 3.6.0
RAID Support 1.1.0 1.1.1

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1 (Deprecated)
Power Supplies Temperature   1.1.1 (Deprecated)
Power Supplies Redundancy   1.2.1 (Deprecated)
Fans   1.1.1 (Deprecated)
VirtualSOP 1.1.0 1.1.2

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.2.2 - Early deployment

Release notes

  • Bugfix: The 255.255.255.255 netmask was missing in the route options (M0)
  • Limitation: module local admin password resets all passwords of all users (M9008)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
If you changed the routing options with the new netmask, reinstall all modules

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
vSOP Support   1.2.0
Database Schema   1.27.0
Shell   1.16.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3
RAID Support   1.1.0
SNMP Agent   3.4.2
Network   1.20.1

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
VirtualSOP   1.1.0 (Early deployment)
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1 (Deprecated)
Power Supplies Temperature   1.1.1 (Deprecated)
Power Supplies Redundancy   1.2.1 (Deprecated)
Fans   1.1.1 (Deprecated)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.2.1 - Early deployment

Release notes

  • Bugfix: Upgraded SNMP Agent and Raid Support to make the raid probe work (M9642)
  • Bugfix: Upgraded Network module to fix a route problem (M9651)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
None

Changed components

Show changed components

New module versions

  • RAID Support
  • SNMP Agent
    • SNMP Agent v.3.4.2 Show release notes
      • Feature: Support for monitoring RAID on baseline 3. (M9030)
    • SNMP Agent v.3.4.1 (intermediate version) Show release notes
      • Improvement: Factorized the implementation of physical sop probes and virtual sops probe. (M8461)
      • Bugfix: Fixed incoherent values between physical sops and virtual sops. (M8461)
    • SNMP Agent v.3.4.0 (intermediate version) Show release notes
      • Feature: Check and report the synchronization state of the NTP server (M4620)
      • Feature: Created the DHCP configuration probe plugin (M8495)
      • Feature: Creation of a generic Memory usage probe (for SOPs or vSOPs) (M8461)
      • Feature: Creation of a generic CPU usage probe (for SOPs or vSOPs) (M8460)
      • Feature: Creation of a inode usage on a partition probe (for SOPs or vSOPs) (M8033)
      • Bugfix: Reactivate net.Console availability probe (M8482)
      • Bugfix: vsop memory reports used memory including cache instead of just rss (M8281)
  • Network
    • Network v.1.20.1 Show release notes
      • Bugfix: Routes were not generated properly on standalone sops (M9262)
    • Network v.1.20.0 (intermediate version) Show release notes
      • Feature: Allow configuration of eth1 in case of High Availability, without a shared address (M8073)
      • Improvement: Removed obsolete cronjob for a better vSOP performance (M7975)
      • Limitation: Baseline 1 not supported (M7975)
      • Deprecated: Routes not correctly configured on a standalone sop (M9262)
    • Network v.1.19.0 (intermediate version) Show release notes
      • Feature: Support for optional High Availability on eth1
      • Bugfix: Routes were not taken into account when vSOP module was installed on baseline 3
      • Bugfix: Ethernet bridge was not working properly on vSOP hosts on baseline 3
      • Bugfix: Default gateway was added on both the main and the alias interfaces in case of High Availability. Routes were not added in that case (M7783)

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
vSOP Support   1.2.0
Database Schema   1.27.0
Shell   1.16.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3
RAID Support 1.0.2 1.1.0
SNMP Agent 3.3.0 3.4.2
Network 1.18.1 1.20.1

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
VirtualSOP   1.1.0 (Early deployment)
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1 (Deprecated)
Power Supplies Temperature   1.1.1 (Deprecated)
Power Supplies Redundancy   1.2.1 (Deprecated)
Fans   1.1.1 (Deprecated)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.2.0 - Early deployment

Release notes

  • Feature: Added 2 additional routes (M0)
  • Feature: Upgraded vSop resource to support Baseline 3 guests (M0)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
Manually export & import vSop resources
A reboot of the SOP is required

Changed components

Show changed components

New module versions

No new module versions.

New resource versions

  • VirtualSOP
    • VirtualSOP v.1.1.0 Show release notes
      • Feature: Add support for baseline 3 vSOP's (M7534)
      • Feature: Support for a private network with NAT
      • Limitation: cannot install more than 1 vSOP resource with the same VLAN ID (M8404)
    • VirtualSOP v.1.0.7 (intermediate version) Show release notes
      • Feature: Added support for Fax Server in VSOP. (M9769)
      • Limitation: cannot install more than 1 vSOP resource with the same VLAN ID (M8404)

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
RAID Support   1.0.2
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
Network   1.18.1
vSOP Support   1.2.0
Database Schema   1.27.0
Shell   1.16.0
SNMP Agent   3.3.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
RAID Status   1.1.0
VirtualSOP 1.0.6 1.1.0 (Early deployment)
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1 (Deprecated)
Power Supplies Temperature   1.1.1 (Deprecated)
Power Supplies Redundancy   1.2.1 (Deprecated)
Fans   1.1.1 (Deprecated)

Actions

Action Previous release version Version
STARTAPPLICATION.3.1.0   1.00 (Early deployment)

Version 2.1.1 - Early deployment

Release notes

  • Bugfix: Upgraded SNMP Agent and Raid Support to make the raid probe work (M9642)
  • Dependency:
    • Baseline >= 3.0.0

Special manual upgrade actions

Action
None

Changed components

Show changed components

New module versions

  • RAID Support
  • SNMP Agent
    • SNMP Agent v.3.4.2 Show release notes
      • Feature: Support for monitoring RAID on baseline 3. (M9030)
    • SNMP Agent v.3.4.1 (intermediate version) Show release notes
      • Improvement: Factorized the implementation of physical sop probes and virtual sops probe. (M8461)
      • Bugfix: Fixed incoherent values between physical sops and virtual sops. (M8461)
    • SNMP Agent v.3.4.0 (intermediate version) Show release notes
      • Feature: Check and report the synchronization state of the NTP server (M4620)
      • Feature: Created the DHCP configuration probe plugin (M8495)
      • Feature: Creation of a generic Memory usage probe (for SOPs or vSOPs) (M8461)
      • Feature: Creation of a generic CPU usage probe (for SOPs or vSOPs) (M8460)
      • Feature: Creation of a inode usage on a partition probe (for SOPs or vSOPs) (M8033)
      • Bugfix: Reactivate net.Console availability probe (M8482)
      • Bugfix: vsop memory reports used memory including cache instead of just rss (M8281)

New resource versions

No new resource versions.

New action versions

No new action versions.

Included components

Modules

Module Previous release version Version
Test SMP Connectivity   1.0.0
Localization   1.1.2 (Deprecated)
Database Server   2.3.1
NTP server   1.8.1
Network   1.18.1
vSOP Support   1.2.0
Database Schema   1.27.0
Shell   1.16.0
System Base   1.3.1 (Deprecated)
SOP Base   1.8.3
RAID Support 1.0.2 1.1.0
SNMP Agent 3.3.0 3.4.2

Resources

Resource Previous release version Version
Ethernet Traffic   1.0
CPU Load Average   1.0
Memory Usage   1.1
MusicOnHoldSelector   1.1
Disk Space   1.2
VirtualSOP   1.0.6
RAID Status   1.1.0
Ambient Temperature   1.1.1 (Deprecated)
CPU Temperature   1.1.1