EscauxFusion
Version 4.25.1 - Early deployment
Release notes
- Improvement: Added support for line_id in the Gigaset (PC-3088)
- Bugfix: Upgrade communication server to fix Sweet32 security flaw (PC-3763)
- Bugfix: Garbage files generated were generated while syncing prompts (PC-3426)
- Bugfix: Upgrade was failing to import Custom Profile (PC-2806)
- Bugfix: Missing configuration of speeddials for Polycom VVX350 (TS-6305)
- Bugfix: astdb could be corrupted on Communication Server shutdown (PC-3071)
- Bugfix: Upgrade music on hold module to restore legacy mp3 (PC-3607)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed components
Hide changed components
New module versions
- Cluster & SOP Active-Active Support
- Cluster & SOP Active-Active Support v.4.1.4 Show release notesHide release notes
- Bugfix: Prevent garbage to be propagated by filesync (PC-3426)
- Bugfix: Stop daemon for prompt file syncing when feature disabled (PC-3426)
- Bugfix: 'Automatic Sync' module parameter should be an on/off flag (PC-3426)
- Bugfix: Uninstall properly escaux-cluster-queue (TS-2960)
- Cluster & SOP Active-Active Support v.4.1.3 (intermediate version) Show release notesHide release notes
- Bugfix: Fix probe notification in case of sync failure (FMG-312)
Music On Hold
Communication Server
Communication Server v.3.41.0 (intermediate version) Show release notesHide release notes
- Feature: Distributed device state using SIP (PC-2600)
- Improvement: Initialize distributed device state cluster (CM-939)
- Improvement: Exclude peer from distributed device state (CM-939)
Communication Server v.3.40.0 (intermediate version) Show release notesHide release notes
- Feature: Prometheus metrics support (PC-2707)
- Improvement: astdb error count exported (PC-2836)
- Improvement: astdb reliability upgrade (PC-3071)
- Improvement: Increased kill timeout (PC-3071)
- Improvement: Possible to force stop subscriptions (PC-2839)
- Bugfix: Crash in send_provisional_keepalive (PC-3150)
- Bugfix: Strict sip peer identification based on callbackextension (TS-4396)
Communication Server v.3.39.9 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.39.8 (intermediate version) Show release notesHide release notes
- Bugfix: SIP session refresh could timeout too early when the refresh time was too low (FMG-1773)
Communication Server v.3.39.7 (intermediate version) Show release notesHide release notes
- Improvement: Include voicemail config generated by FMA (PC-3927)
Communication Server v.3.39.6 (intermediate version) Show release notesHide release notes
- Bugfix: Strict sip peer identification based on callbackextension (FMG-1068)
New resource versions
GigasetN720SAT
Unified End Point SIP peer
GigasetN510IP
GigasetN720IP
Cisco SPA112
Yealink T42S
Yealink T46S
Yealink T53W
Yealink T57W
Yealink T41P
Polycom Virtual Phone
Mitel6873
Stentofon Turbine Ip Station
Cisco ATA 191
PolycomVVX301
PolycomVVX150
PolycomVVX250
PolycomVVX350
PolycomVVX450
PolycomIP6000
PolycomIP550
PolycomIP560
PolycomIP650
PolycomIP670
PolycomIP331
PolycomIP450
PolycomIP7000
PolycomIP335
PolycomVVX500
PolycomVVX1500
PolycomVVX310
PolycomVVX400
PolycomVVX300
PolycomVVX410
PolycomVVX600
PolycomVVX101
PolycomVVX201
PolycomVVX401
PolycomVVX411
PolycomVVX311
PolycomVVX501
PolycomVVX601
PolycomTrio8500
GigasetN870SAT
- GigasetN870SAT v.2.0.0 Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3010)
- Improvement: use new Line ID field for MAC bs instead of dedicated var (PC-3088)
Mitel6863
- Mitel6863 v.2.0.0 Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3420)
- Bugfix: the language of the Mitel phones must be the one of the user (PC-3401)
- Bugfix: call forward must be disabled on Mitel phones (PC-3400)
- Bugfix: the name of the screen of the Mitel phones needed to be inline with Fusion Policy (PC-3405)
- Bugfix: admin password of the Mitel phone should be the same than the one for the Polycom (PC-3402)
Mitel6867
- Mitel6867 v.2.0.0 Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3420)
- Feature: new type of bottom softkey 'directory' to access LDAP corp. dir. (PC-3403)
- Bugfix: the language of the Mitel phones must be the one of the user (PC-3401)
- Bugfix: call forward must be disabled on Mitel phones (PC-3400)
- Bugfix: the name of the screen of the Mitel phones needed to be inline with Fusion Policy (PC-3405)
- Bugfix: admin password of the Mitel phone should be the same than the one for the Polycom (PC-3402)
Mitel6869
- Mitel6869 v.2.0.0 Show release notesHide release notes
- Feature: full sync_code rewriting for source SOP configuration and FMA support (PC-3420)
- Feature: new type of bottom softkey 'directory' to access LDAP corp. dir. (PC-3403)
- Bugfix: the language of the Mitel phones must be the one of the user (PC-3401)
- Bugfix: call forward must be disabled on Mitel phones (PC-3400)
- Bugfix: the name of the screen of the Mitel phones needed to be inline with Fusion Policy (PC-3405)
- Bugfix: admin password of the Mitel phone should be the same than the one for the Polycom (PC-3402)
GigasetN870IP
New action versions
- GetExtensionInfo
- GetExtensionInfo v.2.0.0 Show release notesHide release notes
- Improvement: This version has major changes and breaks the API. It allows for optimized queries when only simple information is queried. (M15078) - link
STARTCALLFLOW
Included components
Modules
Resources
Actions
Version 4.25.0 - Early deployment
Release notes
- Feature: Add profile to configure MME1 resource (PC-2334)
- Improvement: Support ldap directory and reboot for Mitel phones (PC-3279)
- Improvement: Support gigaset configuration from FMA (PC-3279)
- Improvement: Use custom caller name and add translations for voicemail notifier (PC-1325)(PC-1324)
- Improvement: Improve chat message send to notify about new voicemail (PC-1325)
- Improvement: Upgrade API for vCards (PC-1325)
- Improvement: Provide caller's personal DDI to FMU (PC-1572)
- Improvement: Add more information in external voicemail notification (PC-1325)
- Improvement: Add directory centric configuration for SOP API (PC-1606)
- Improvement: Emergency call based on extension's site (PC-1088)
- Improvement: Added variable OriginalCalledDdi MapDDI callflow (PC-1761)
- Improvement: Improve performance in large clusters (PC-1634)
- Improvement: Do not apply queue policies on propagation (PC-1634)
- Improvement: Upgrade tasks at template upgrading (MCH-742)
- Improvement: Make internal provisioning access restrictions configurable (PC-2795)
- Improvement: Set reports to template version when upgrading (TS-4266)
- Improvement: Update database schema to support the column line_id (PC-3183)
- Improvement: Gigaset Nx70 are now configurable from SOP (PC-3023)
- Improvement: FMA now allows asterisk config override (PC-3060)
- Improvement: Support Polycom over Internet for Steam (MCH-706)
- Improvement: Register phones in APL at creation (PC-2919)
- Improvement: Cisco module don't register Fusion in APL anymore (PC-2424)
- Improvement: Support ATA191 and Stentofon configuration from FMA (PC-2807)
- Improvement: Detect astdb corruption on restart (PC-2838)
- Improvement: User status is reloaded on apply changes (PC-2883)
- Bugfix: Fix sudoers permissions with escaux-fma (PC-837)
- Bugfix: Fix bad ETL expression in SDX6 resource generation (TS-879)
- Bugfix: Wrong permissions in tftpboot prevent UEP to fetch endpoint configuration (TS-2154)
- Bugfix: Fix COLP in CallQueuer (TS-2579)
- Bugfix: Fix missing parameter SopFaxNumberOfChannels in SOP profile (TS-2598)
- Bugfix: SopLanguage was ignored for external calls (TS-2626)
- Bugfix: Added missing nl_NL language in sop config (PC-2319)
- Bugfix: Fix value of global parameter TemplateConfRoom12 (PC-2305)
- Bugfix: Shortcodes failed after authentication (TS-2496)
- Bugfix: FMU mobile number not reachable in private mode (TS-2468)
- Bugfix: ATA191 provisioning was failing (PC-1701)
- Bugfix: Fix perl warning on apply-change (TS-1238)
- Bugfix: Report on a long range of time was slow (TS-2169)
- Bugfix: Fix typo in profile documentation (PC-0)
- Bugfix: Calls in queues were not visible in net.Console (TS-2838)
- Bugfix: Fix dbmonitor logging issue when there is no sufficient mysql privilege (TS-3007)
- Bugfix: Fix postsync issues when installing Mail Server module (PC-1723)
- Bugfix: Fix file system concurrency issue when generating new certificate (MCH-597) (TS-3065)
- Bugfix: Fix call termination code due to restriction in NumberReformatter callflow (TS-2004)
- Bugfix: Fix status change not taken into account (TS-3027)
- Bugfix: Busy tone in user profile was not played (TS-4040)
- Bugfix: Queue policies using a same queue were not applied (TS-3617)
- Bugfix: Fix filter fields issues in ReportCDR (TS-1621)
- Bugfix: Column selection was not taken into account in ReportQDR (TS-2531)
- Bugfix: Site callerID not set for emergency call (PC-3425)
- Bugfix: Template upgrade could fails when upgrading tasks (TS-4217)
- Bugfix: Avoid that the escaux-devices-api do too many dbGetProfileParameters in parallel (PC-3329)
- Bugfix: Ensure that provisioning is skipped if an apply changes is ongoing (PC-2961)
- Bugfix: Not possible to change system music on hold (PC-2609)
- Bugfix: Add caching on top of fusionGetQueues to avoid high load issue with queue policies on large setup (TS-5065)
- Bugfix: Force to answer the call before hanging up (TS-4234)
- Bugfix: Polycom provisioning fails when used through SOP DHCP (PC-2785)
- Bugfix: Upgrade SOP API module to fix hanging AMI sessions slowing down apply changes (TS-3810)
- Bugfix: Fix FMA startup on empty DB (PC-3039)
- Bugfix: Outbound proxy templating on Polycom resources was not correctly set (MCH-1265)
- Bugfix: /escaux/etc/resource was not created when no phone resources exist on SMP (PC-2919)
- Bugfix: Minimal voicemail length is now set to 0 (TS-4471)
- Bugfix: device owner information was missing in RWQ reports (PC-1547)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Turbine Ip Station Support
- Turbine Ip Station Support v.2.0.1 Show release notesHide release notes
- Feature: new driver for SDV3 allowing reconfigure from FMA (PC-2819)
- Improvement: migration of package escaux-turbine-station to git repository (PC-2819)
- Improvement: now use apt to install instead or raw dpkg (PC-2819)
Communication Server
Communication Server v.3.39.4 (intermediate version) Show release notesHide release notes
- Improvement: Make sip auto domain configurable (FMG-813)
- Improvement: Support of Swyx transfer (FMG-813)
Communication Server v.3.39.3 (intermediate version) Show release notesHide release notes
- Improvement: Prometheus exporter for defence (PC-2690)
Cisco ATA Support
Cisco ATA Support v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: new driver SDSA for ATA 191 allowing reconfigure from FMA (PC-2820)
SOP Base
SOP Base v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Create /escaux/etc/resource (PC-2937)
Gigaset Phone Support
- Gigaset Phone Support v.1.7.0 Show release notesHide release notes
- Feature: Nx70 drivers for line_id parameter support (PC-3088)
- Bugfix: Prevent 'provisioning failed' even if went good (PC-3010)
- Bugfix: fix codecs to prevent activation of PCMU (PC-3010)
Gigaset Phone Support v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Install gigaset package supporting FMA config (PC-3010)
- Bugfix: Fix provisioning URL behavior for Nx70 (PC-3010)
- Improvement: Codecs in config for Nx70 and better XML formatting (PC-3010)
Database Schema
Music On Hold
- Music On Hold v.2.0.0 Show release notesHide release notes
- Feature: Update default music on hold and include license files (PC-2609)
- Improvement: Custom music on hold files are not removed any more (PC-2609)
- Improvement: Setup debian packaging (PC-2609)
SOP API
SOP API v.5.17.1 (intermediate version) Show release notesHide release notes
- Bugfix: Explicitely destroy AMI HTTP sessions (TS-3810)
SOP API v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support of ENUMSTRING type (FMG-807)
- Improvement: Re-use HTTP AMI sessions (TS-3511)
- Bugfix: Correct fallback to extension's Secondary phone when Primary doesn't match (TS-680)
SOP API v.5.16.7 (intermediate version) Show release notesHide release notes
- Improvement: Expose call queuer associated to queue policy in vCards (CM-704)
SOP API v.5.16.6 (intermediate version) Show release notesHide release notes
- Bugfix: Fix duplicated DB entries issue when multiple queue policies use the same queue (TS-3617)
SOP API v.5.16.5 (intermediate version) Show release notesHide release notes
- Improvement: Allow to call fusion set presence via HTTP (fma) (TS-3511)
Unified End Point Support
Unified End Point Support v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Return an error when API is being used during an apply changes (TS-4047)
Mitel Phone Support
- Mitel Phone Support v.1.4.0 Show release notesHide release notes
- Feature: drivers for 6863/7/9i allowing reconfigure from SOP (PC-3420)
- Feature: add postsync script to cleanup no more used resources (PC-1925)
- Feature: activate LDAP Directory in Mitel 6867/9i (PC-3403)
- Feature: install Mitel language packs (PC-3402)
- Feature: allow setting admin password and default to same value as Polycom (PC-3402)
- Feature: allow to do a 'phone reload' to trigger refetching from phone (PC-1925)
- Bugfix: make 'phone reboot' working out (PC-1925)
New resource versions
SyncCDRDB v.3.0.5 (intermediate version) Show release notesHide release notes
- Bugfix: TS-44: SDR generation doesn't take state before last run into account leading to missing SDRs
SyncCDRDB v.3.0.4 (intermediate version) Show release notesHide release notes
- Bugfix: Incomplete instance in attribute_log broke the task (TS-833)
New action versions
Busy
AddQueueMember
CallService
GetXpath
GetXpath v.2.0.0 Show release notesHide release notes
- Improvement: added possibility to by-pass Xpath treatment and get the RAW body query result (M7966) - link
GetXpath v.1.4 Show release notesHide release notes
- Improvement: Compatibility with the Communication Server module
PlayPrompt
PlayVariable
PlayVariable v.1.1 Show release notesHide release notes
- Improvement: Compatibility with the Communication Server module
RemoveQueueMember
Wait
Answer
CheckHoliday
If
If v.1.6.0 Show release notesHide release notes
- Improvement: Use the default context instead of NoRestrict when going to the next callflow action
Hangup
Hangup v.1.3 Show release notesHide release notes
SetConnectedLine
SetLanguage
Pickup
GetDigit
CheckDate
SetVar
RecordPrompt
GetExtensions
GetExtensions v.1.7.0 Show release notesHide release notes
- Feature: Added the possibility to search on profile parameter value
- Feature: Added the possibility to search on primary or secondary phone
- Bugfix: Empty the result before collecting the result (M7130)
CallDevicesByExtension
- CallDevicesByExtension v.1.12.1 Show release notesHide release notes
- Bugfix: When no extensions was filled in, the callflow used to exit (M7214)
- Improvement: Now the dropdown to select extensions is optional
- Improvement: Compatibility with Communication Server 3 (M7654)
SetRingTone
SetCallerID
SetCallerID v.1.7.2 Show release notesHide release notes
- Improvement: Add 'Keep the original presentation but set the call as screened' (M7605)
- Improvement: Compatibility with Communication Server 3 (M7654)
GetTranslation
GetTranslation v.1.0.1 Show release notesHide release notes
- Improvement: Compatibility with Communication Server 3 (M7654)
CheckValues
DirectedCallPark
ExtensionExists
PrintMessage
VoiceMailMenu
ForEach
ForEach v.1.2.0 Show release notesHide release notes
- Feature: It is now possible to go through the same ForEach multiple times (see dependencies) (M7540)
- Bugfix: Use a namespaced variable 'comma' in order to not overload the global parameter COMMA (M7982)
CheckChannelGroup
Switch
GetExtensionInfo
GetExtensionInfo v.2.0.0 Show release notesHide release notes
- Improvement: This version has major changes and breaks the API. It allows for optimized queries when only simple information is queried. (M15078) - link
GetExtensionInfo v.1.6.0 Show release notesHide release notes
- Feature: Take default values into account for profile parameters (M8854)
- Feature: Added the possibility to do a lookup per mobile number (M10350)
- Improvement: Add support for the new profile parameters implementation (M8738)
Redirect
AppendDataInUserfield
SetMusicOnHold
GotoExtension
ManageHangupHandlers
SendIM
DisableCDR
JsonParse
GetHashParameter
GetSiteFromIP
AutoRecall
BeginSub
CheckDeviceAvailability
SplitString
SipSetHeader
SetRedirectingInfo
HTTP
- HTTP v.1.2.0 Show release notesHide release notes
- Feature: Display Content type (M15759)
- Improvement: Support custom HTTP methods in func_curl (M18044)
- Limitations: HTTPS support is not reliable
AddToConference
Voicemail
IVR
ForkCDR
FormatNumber
GetExtensionByParameterValue
SetPresenceState
DeleteDatabaseTree
GetPresenceState
Queue
CallDevices
CallInterface
GoSub
Return
GetSiteFromName
Included components
Modules
Resources
Actions
Version 4.24.1 - Early deployment
Release notes
- Improvement: Update FMA (PC-2106)
- Improvement: Allow to update extension of user (PC-2842)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.24.0 - Early deployment
Release notes
- Feature: Expose personal DDI for FMU P-Charge-Info (PC-2737)
- Feature: Support for Polycom VVX 150 and VVX 350 (PC-2382)
- Improvement: VSOP cpu limits (PC-1763)
- Improvement: Upgrade tasks at template upgrading (MCH-742)
- Improvement: Profile to configure MusicOnHold resource (PC-2334)
- Improvement: Allow config max database connections (PC-2486)
- Improvement: Update SMP reports versions (TS-2531) (TS-1621)
- Bugfix: Busy tone in user profile not played (TS-4040)
- Bugfix: Fix postsync.d causing config to disapear (TS-3476)
- Bugfix: Disable usage of state interface (TS-3463)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
ReportQDR
ReportCDR
PolycomVVX350
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.23.1 - Early deployment
Release notes
- Feature: Support for stentofon and ATA 191 in FMA (PC-2807)
- Feature: Communication Server defence exporter (PC-2690)
- Feature: Added support for Polycom VVX150 and VVX350 (PC-2382)
- Bugfix: Queue members were not always ringing (TS-3463)
- Bugfix: SDX6 resource missing after apply-change (TS-3476)
- Bugfix: Device owner missing in queue report (PC-1547)
- Bugfix: Visual glitch when filter on input channel on CDR report (TS-1621)
- Bugfix: Queue report displays all column instead of the one selected since version (TS-2531)
- Improvement: Max mysql configuration is now configurable (PC-2486)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Communication Server
Communication Server v.3.39.2 (intermediate version) Show release notesHide release notes
- Bugfix: Logger memory leak (PC-2538)
- Bugfix: Multiple refer transfer leak (PC-2538)
- Bugfix: Queue set member leak (PC-2538)
- Bugfix: Manager HTTP connection leak (PC-2538)
- Bugfix: Postinst breaks new installations (PC-1763)
Communication Server v.3.39.0 (intermediate version) Show release notesHide release notes
- Improvement: Detect CPU time allocated to vSOP (PC-1763)
- Improvement: Call back extension set on SIP INVITE contact header (FMG-792)
- Bugfix: Callflows using LOCK could sometimes run in parallel (FMG-896)
- Deprecated: New installations fail
Polycom Phone Support
Polycom Phone Support v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support for VVX350 (PC-2382)
- Bugfix: Fix VVX-150 interface for Status softkey feature (PC-2727)
Polycom Phone Support v.5.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Case sensitivity issue would cause phone configuration to be removed from /tftpboot (TS-3476)
Turbine Ip Station Support
- Turbine Ip Station Support v.2.0.1 Show release notesHide release notes
- Feature: new driver for SDV3 allowing reconfigure from FMA (PC-2819)
- Improvement: migration of package escaux-turbine-station to git repository (PC-2819)
- Improvement: now use apt to install instead or raw dpkg (PC-2819)
Cisco ATA Support
New resource versions
- Stentofon Turbine Ip Station
Cisco ATA 191
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.23.0 - Early deployment
Release notes
- Feature: escaux-fma override some SOP API (PC-0)
- Improvement: Update Database Schema Module to 3.11.0 (TS-3007)
- Bugfix: Calls in queues were not visible in net.Conosle (TS-2838)
- Bugfix: Give priority to pbx dialplan over national one (PC-303)
- Bugfix: Update Mail Server module to fix configuration update issue (PC-1723)
- Bugfix: Upgrade communication server to fix libcorosync dependency issue (PC-1723)
- Bugfix: Update corosync for baseline5 host compatibility (TS-2973)
- Bugfix: Fix file system concurrency issue when generating new certificate (MCH-597)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.38.1 Show release notesHide release notes
- Improvement: Configurable SIP UDP send buffer (TS-2862)
- Bugfix: Force update of libcorosync4
- Bugfix: Update of libjansson was depending on dahdi
Certificate Generator
Certificate Generator v.1.0.4 (intermediate version) Show release notesHide release notes
- Bugfix: Actual fix for the concurrency issues (PC-1723)
Certificate Generator v.1.0.3 (intermediate version) Show release notesHide release notes
- Improvement: Fix concurrency issue (MCH-597)
- Deprecated: Actually not the proper fix. 1.0.4 does this (MCH-597)
Database Schema
- Database Schema v.3.11.0 Show release notesHide release notes
- Improvement: dbmonitor - Check we have sufficient MySQL privileges prior to any request (TS-3007)
- Bugfix: dbmonitor - Call to archive for cdr table with right arguments
- Bugfix: dbmonitor - Date in archive process must stay identical throughout iterations
Mail Server
Mail Server v.2.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: make update-exim4.conf not fail (PC-1723)
net.Console
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.22.0 - Early deployment
Release notes
- Feature: Update module Fusion Management API (PC-1830)(PC1834)(PC-1976)
- Feature: Added shortcode to change queue forward number for specific status (PC-1022)
- Feature: Monitor queue status via BLF on Polycom phone (PC-1046)
- Feature: Handle exit on key press (DTMF) in QDR report (TS-2449)
- Improvement: Upgrade Sync LDAP task to 2.0.7 (TS-1978)
- Improvement: Update module LDAP Synchronization to 1.17.5 (TS-1978)
- Improvement: Upgrade module Polycom Phone Support to version 5.16.0 (PC-1063)
- Improvement: Use CallGroup for emergency (PC-2307)
- Improvement: Use CallGroup when called is unknown (PC-2307)
- Improvement: Added variable OriginalCalledDdi MapDDI callflow (PC-1761)
- Improvement: Gigaset N510 N720 firmware upgrade (PC-1765)
- Bugfix: Fix call termination code due to restriction in NumberReformatter callflow (TS-2004)
- Bugfix: Update SOP API to fix queue logout on standalone SOP when using queue policies (PC-0)
- Bugfix: Corosync does not start on default installation (PC-1786)
- Bugfix: Avoid blocking Communication Server on corosync restart (TS-2568)
- Bugfix: Fix COLP in CallQueuer (TS-2579)
- Bugfix: Fix missing parameter SopFaxNumberOfChannels in SOP profile (TS-2598)
- Bugfix: SopLanguge was ignored for external calls (TS-2626)
- Bugfix: Queue Code was not displayed in QDR report (TS-2610)
- Bugfix: Added missing nl_NL language in sop config (PC-2319)
- Bugfix: Fix value of global parameter TemplateConfRoom12 (PC-2305)
- Bugfix: Allow null first names in Fusion Management API (PC-1794)
- Bugfix: Fix ordering of queue policies (PC-1794)
- Bugfix: Prevent COLP for public sip trunk (TS-0)
- Bugfix: Align STARTDYNAMICAPPLICATION version (TS-2490)
- Bugfix: Shortcodes failed after authentication (TS-2496)
- Bugfix: FMU mobile number not reachable in private mode (TS-2468)
- Bugfix: ATA191 provisioning was failing (PC-1701)
- Bugfix: Fix perl warning on apply-change (TS-1238)
- Bugfix: Report on a long range of time was slow (TS-2169)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Cisco ATA Support
- Cisco ATA Support v.2.3.0 Show release notesHide release notes
- Feature: Upgraded firmware of ATA191 to 11.1SR4 (PC-1701)
- Improvement: Optimized package size (PC-1701)
- Bugfix: ATA 191 failed to provision (PC-1701)
- Bugfix: Support provisioning from internet (PC-1769)
Gigaset Phone Support
- Gigaset Phone Support v.1.5.0 Show release notesHide release notes
- Feature: Upgraded Gigaset N510 firmware to v258 (PC-1765)
- Feature: Upgraded Gigaset N720 firmware to v116 (PC-1765)
Gigaset Phone Support v.1.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix uninitialized vars in postsync script (PC-3919)
LDAP Synchronization
LDAP Synchronization v.1.17.4 (intermediate version) Show release notesHide release notes
- Bugfix: caller_id shouldn't be mandatory (TS-2581)
LDAP Synchronization v.1.17.3 (intermediate version) Show release notesHide release notes
- Bugfix: correct variables to generate right ldap.ini (TS-2581)
LDAP Synchronization v.1.17.2 (intermediate version) Show release notesHide release notes
- Bugfix: doesn't install dependencies as they are now defined in escaux-ldap package 1.17.2 (TS-2581)
- Bugfix: ldap.ini was not written anymore since using apt installation method (TS-2581)
- Bugfix: problem in variables, now passing char_encoding as constant utf8 to allow use this variable slot for caller_id (TS-2581)
LDAP Synchronization v.1.17.1 (intermediate version) Show release notesHide release notes
- Feature: support for setting caller id from LDAP attribute (TS-2581)
LDAP Synchronization v.1.17.0 (intermediate version) Show release notesHide release notes
- Feature: allow creation of 2 DDIs per entry (TS-2581)
- Improvement: now use apt to install escaux-ldap package (TS-2581)
- Bugfix: assign_ddi feature not used (TS-2581)
LDAP Synchronization v.1.16.2 (intermediate version) Show release notesHide release notes
- Bugfix: When resolving the DN to bind with, properly handle a bind failure (TS-2639)
LDAP Synchronization v.1.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: ldap.ini was generated incorrectly in 1.16.0
LDAP Synchronization v.1.16.0 (intermediate version) Show release notesHide release notes
- Feature: Support for Active Directory UPN authentication (PC-1080)
- Deprecated: ldap.ini incorrectly generated
SOP API
Polycom Phone Support
- Polycom Phone Support v.5.16.0 Show release notesHide release notes
- Feature: Ensure virtual phone gets reloaded if parameters.json changes (PC-874)
- Bugfix: Status was not always correctly displayed on VVX (PC-1063)
Polycom Phone Support v.5.15.3 (intermediate version) Show release notesHide release notes
- Improvement: IP networks allowed to access internal provisioning are now configurable (PC-2796)
Communication Server
- Communication Server v.3.38.0 Show release notesHide release notes
- Improvement: Update to latest corosync flatiron (TS-2568)
- Bugfix: Avoid blocking after corosync daemon restart (TS-2568)
- Deprecated: Install only works on Fusion
Communication Server v.3.37.8 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.37.7 (intermediate version) Show release notesHide release notes
- Improvement: Allow to no load modules (FMG-745)
Communication Server v.3.37.6 (intermediate version) Show release notesHide release notes
- Bugfix: func_lock - Under contention it becomes possible that multiple channels will be told they successfully obtained the lock (FMG-896)
Communication Server v.3.37.5 (intermediate version) Show release notesHide release notes
- Bugfix: REFER may contain broken authentication header (FMG-483)
- Bugfix: Allow standard length domain resolution in chan_sip (PC-1770)
Communication Server v.3.37.4 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in SIP redirect (TS-2509)
Communication Server v.3.37.3 (intermediate version) Show release notesHide release notes
- Bugfix: Callflow hooks without channels locking (PC-1612)
Communication Server v.3.37.2 (intermediate version) Show release notesHide release notes
- Improvement: Callflow hooks without channels locking (PC-1612)
- Bugfix: Filtered events should not wake manager sessions (PC-1193) (TS-1565)
New resource versions
ReportQDR
ReportQDR v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: Handle exit on key press (DTMF) (TS-2449)
ReportQDR v.2.2.3 (intermediate version) Show release notesHide release notes
- Bugfix: Report on a long range of time was slow (TS-2169)
SyncLDAP
SyncLDAP v.2.0.6 (intermediate version) Show release notesHide release notes
- Deprecated: Never deployed in production (PC-1080)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.21.1 - Early deployment
Release notes
- Bugfix: Fix ordering of queue policies (PC-1794)
- Bugfix: Allow null first names (PC-1794)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- SOP API
- SOP API v.5.16.1 Show release notesHide release notes
- Bugfix: Location card should be last in list (PC-1794)
- Improvement: Support 'Penalty' (with uppercase P) query parameter in fusionQueuePolicySetState
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.21.0 - Early deployment
Release notes
- Improvement: Improve performance in large clusters (PC-1634)
- Improvement: Do not apply queue policies on propagation (PC-1634)
- Bugfix: Fix typo in profile documentation (PC-0)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.17 - Early deployment
Release notes
- Bugfix: Apply changes failed with gigaset N510 and N720 devices (PC-3919)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.16 - Early deployment
Release notes
- Bugfix: Remove duplicate upgrade script (PC-3900)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.15 - Early deployment
Release notes
- Bugfix: Upgrade communication server to fix Sweet32 security flaw (PC-3763)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.41.0 (intermediate version) Show release notesHide release notes
- Feature: Distributed device state using SIP (PC-2600)
- Improvement: Initialize distributed device state cluster (CM-939)
- Improvement: Exclude peer from distributed device state (CM-939)
Communication Server v.3.40.0 (intermediate version) Show release notesHide release notes
- Feature: Prometheus metrics support (PC-2707)
- Improvement: astdb error count exported (PC-2836)
- Improvement: astdb reliability upgrade (PC-3071)
- Improvement: Increased kill timeout (PC-3071)
- Improvement: Possible to force stop subscriptions (PC-2839)
- Bugfix: Crash in send_provisional_keepalive (PC-3150)
- Bugfix: Strict sip peer identification based on callbackextension (TS-4396)
Communication Server v.3.39.9 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.39.8 (intermediate version) Show release notesHide release notes
- Bugfix: SIP session refresh could timeout too early when the refresh time was too low (FMG-1773)
Communication Server v.3.39.7 (intermediate version) Show release notesHide release notes
- Improvement: Include voicemail config generated by FMA (PC-3927)
Communication Server v.3.39.6 (intermediate version) Show release notesHide release notes
- Bugfix: Strict sip peer identification based on callbackextension (FMG-1068)
Communication Server v.3.39.5 (intermediate version) Show release notesHide release notes
- Bugfix: Some astdb corruption was not detected (PC-2838)
Communication Server v.3.39.4 (intermediate version) Show release notesHide release notes
- Improvement: Make sip auto domain configurable (FMG-813)
- Improvement: Support of Swyx transfer (FMG-813)
Communication Server v.3.39.3 (intermediate version) Show release notesHide release notes
- Improvement: Prometheus exporter for defence (PC-2690)
Communication Server v.3.39.2 (intermediate version) Show release notesHide release notes
- Bugfix: Logger memory leak (PC-2538)
- Bugfix: Multiple refer transfer leak (PC-2538)
- Bugfix: Queue set member leak (PC-2538)
- Bugfix: Manager HTTP connection leak (PC-2538)
- Bugfix: Postinst breaks new installations (PC-1763)
Communication Server v.3.39.0 (intermediate version) Show release notesHide release notes
- Improvement: Detect CPU time allocated to vSOP (PC-1763)
- Improvement: Call back extension set on SIP INVITE contact header (FMG-792)
- Bugfix: Callflows using LOCK could sometimes run in parallel (FMG-896)
- Deprecated: New installations fail
Communication Server v.3.38.1 (intermediate version) Show release notesHide release notes
- Improvement: Configurable SIP UDP send buffer (TS-2862)
- Bugfix: Force update of libcorosync4
- Bugfix: Update of libjansson was depending on dahdi
Communication Server v.3.38.0 (intermediate version) Show release notesHide release notes
- Improvement: Update to latest corosync flatiron (TS-2568)
- Bugfix: Avoid blocking after corosync daemon restart (TS-2568)
- Deprecated: Install only works on Fusion
Communication Server v.3.37.8 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.37.7 (intermediate version) Show release notesHide release notes
- Improvement: Allow to no load modules (FMG-745)
Communication Server v.3.37.6 (intermediate version) Show release notesHide release notes
- Bugfix: func_lock - Under contention it becomes possible that multiple channels will be told they successfully obtained the lock (FMG-896)
Communication Server v.3.37.5 (intermediate version) Show release notesHide release notes
- Bugfix: REFER may contain broken authentication header (FMG-483)
- Bugfix: Allow standard length domain resolution in chan_sip (PC-1770)
Communication Server v.3.37.4 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in SIP redirect (TS-2509)
Communication Server v.3.37.3 (intermediate version) Show release notesHide release notes
- Bugfix: Callflow hooks without channels locking (PC-1612)
Communication Server v.3.37.2 (intermediate version) Show release notesHide release notes
- Improvement: Callflow hooks without channels locking (PC-1612)
- Bugfix: Filtered events should not wake manager sessions (PC-1193) (TS-1565)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.14 - Early deployment
Release notes
- Bugfix: Upgrade MOH module to restore legacy mp3 (PC-3607)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.13 - Early deployment
Release notes
- Bugfix: Keep custom profiles after upgrade (PC-2806)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.12 - Early deployment
Release notes
- Bugfix: Not possible to change system music on hold (PC-2609)
- Bugfix: Avoid that the escaux-devices-api do too many dbGetProfileParameters in parallel (PC-3329)
- Bugfix: Ensure that provisioning is skipped if an apply changes is ongoing (PC-2961)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Music On Hold
- Music On Hold v.2.0.0 Show release notesHide release notes
- Feature: Update default music on hold and include license files (PC-2609)
- Improvement: Custom music on hold files are not removed any more (PC-2609)
- Improvement: Setup debian packaging (PC-2609)
Unified End Point Support
Unified End Point Support v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Return an error when API is being used during an apply changes (TS-4047)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.11 - Early deployment
Release notes
- Bugfix: Add caching on top of fusionGetQueues to avoid high load issue with queue policies on large setup (TS-5065)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.10 - Early deployment
Release notes
- Improvement: Added support for Polycom VVX150 and VVX350 (PC-2382)
- Bugfix: Upgrade SOP API module to fix hanging AMI sessions slowing down apply changes (TS-3810)
- Bugfix: Polycom provisioning fails when used through SOP DHCP (PC-2785)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Polycom Phone Support
- Polycom Phone Support v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support for VVX350 (PC-2382)
- Bugfix: Fix VVX-150 interface for Status softkey feature (PC-2727)
Polycom Phone Support v.5.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Case sensitivity issue would cause phone configuration to be removed from /tftpboot (TS-3476)
Polycom Phone Support v.5.16.0 (intermediate version) Show release notesHide release notes
- Feature: Ensure virtual phone gets reloaded if parameters.json changes (PC-874)
- Bugfix: Status was not always correctly displayed on VVX (PC-1063)
SOP API
SOP API v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support of ENUMSTRING type (FMG-807)
- Improvement: Re-use HTTP AMI sessions (TS-3511)
- Bugfix: Correct fallback to extension's Secondary phone when Primary doesn't match (TS-680)
SOP API v.5.16.7 (intermediate version) Show release notesHide release notes
- Improvement: Expose call queuer associated to queue policy in vCards (CM-704)
SOP Base
SOP Base v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Create /escaux/etc/resource (PC-2937)
New resource versions
PolycomVVX350
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.9 - Early deployment
Release notes
- Improvement: Set the minimal voicemail length to 0 (TS-4471)
- Improvement: Set reports to template version when upgrading (TS-4266)
- Bugfix: Template upgrade could fails when upgrading tasks (TS-4217)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.8 - Early deployment
Release notes
- Improvement: Make internal provisioning access restrictions configurable (PC-2795)
- Improvement: Upgrade tasks at template upgrading (MCH-742)
- Bugfix: Busy tone in user profile was not played (TS-4040)
- Bugfix: Queue policies using a same queue were not applied (TS-3617)
- Bugfix: Fix filter fields issues in ReportCDR (TS-1621)
- Bugfix: Column selection was not taken into account in ReportQDR (TS-2531)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
SOP API v.5.16.4 (intermediate version) Show release notesHide release notes
- Bugfix: Disable usage of state interface (TS-3463)
Polycom Phone Support
New resource versions
ReportQDR v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: Handle exit on key press (DTMF) (TS-2449)
ReportCDR
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.7 - Early deployment
Release notes
- Feature: Add profile to configure MME1 resource (PC-2334)
- Improvement: Improve performance in large clusters (PC-1634)
- Improvement: Do not apply queue policies on propagation (PC-1634)
- Bugfix: Calls in queues were not visible in net.Console (TS-2838)
- Bugfix: Fix dbmonitor logging issue when there is no sufficient mysql privilege (TS-3007)
- Bugfix: Fix postsync issues when installing Mail Server module (PC-1723)
- Bugfix: Fix file system concurrency issue when generating new certificate (MCH-597) (TS-3065)
- Bugfix: Fix call termination code due to restriction in NumberReformatter callflow (TS-2004)
- Bugfix: Fix status change not taken into account (TS-3027)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- SOP API
- SOP API v.5.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Location card should be last in list (PC-1794)
- Improvement: Support 'Penalty' (with uppercase P) query parameter in fusionQueuePolicySetState
SOP API v.5.16.0 (intermediate version) Show release notesHide release notes
- Improvement: Improve performance in large clusters (PC-1634)
Certificate Generator
Certificate Generator v.1.0.4 (intermediate version) Show release notesHide release notes
- Bugfix: Actual fix for the concurrency issues (PC-1723)
Certificate Generator v.1.0.3 (intermediate version) Show release notesHide release notes
- Improvement: Fix concurrency issue (MCH-597)
- Deprecated: Actually not the proper fix. 1.0.4 does this (MCH-597)
Database Schema
- Database Schema v.3.11.0 Show release notesHide release notes
- Improvement: dbmonitor - Check we have sufficient MySQL privileges prior to any request (TS-3007)
- Bugfix: dbmonitor - Call to archive for cdr table with right arguments
- Bugfix: dbmonitor - Date in archive process must stay identical throughout iterations
Database Schema v.3.10.0 (intermediate version) Show release notesHide release notes
- Feature: Add table to store current queues for extension. (PC-1634)
Database Schema v.3.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: Leave dbmonitor if a delete request fails when archiving (PC-541)
Database Schema v.3.9.0 (intermediate version) Show release notesHide release notes
- Feature: Call quality statistics (PC-749)
Mail Server
Mail Server v.2.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: make update-exim4.conf not fail (PC-1723)
net.Console
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.6 - Early deployment
Release notes
- Improvement: Added variable OriginalCalledDdi MapDDI callflow (PC-1761)
- Bugfix: Fix COLP in CallQueuer (TS-2579)
- Bugfix: Fix missing parameter SopFaxNumberOfChannels in SOP profile (TS-2598)
- Bugfix: SopLanguage was ignored for external calls (TS-2626)
- Bugfix: Added missing nl_NL language in sop config (PC-2319)
- Bugfix: Fix value of global parameter TemplateConfRoom12 (PC-2305)
- Bugfix: Shortcodes failed after authentication (TS-2496)
- Bugfix: FMU mobile number not reachable in private mode (TS-2468)
- Bugfix: ATA191 provisioning was failing (PC-1701)
- Bugfix: Fix perl warning on apply-change (TS-1238)
- Bugfix: Report on a long range of time was slow (TS-2169)
- Bugfix: Fix typo in profile documentation (PC-0)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Cisco ATA Support
- Cisco ATA Support v.2.3.0 Show release notesHide release notes
- Feature: Upgraded firmware of ATA191 to 11.1SR4 (PC-1701)
- Improvement: Optimized package size (PC-1701)
- Bugfix: ATA 191 failed to provision (PC-1701)
- Bugfix: Support provisioning from internet (PC-1769)
New resource versions
Cisco ATA 191
Cisco ATA 191 v.1.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Sync code was not running (TS-2205)
- Deprecated: intermediate fix version
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.5 - Early deployment
Release notes
- Improvement: Use custom caller name and add translations for voicemail notifier (PC-1325)(PC-1324)
- Improvement: Improve chat message send to notify about new voicemail (PC-1325)
- Improvement: Upgrade API for vCards (PC-1325)
- Improvement: Provide caller's personal DDI to FMU (PC-1572)
- Improvement: Add more information in external voicemail notification (PC-1325)
- Improvement: Add directory centric configuration for SOP API (PC-1606)
- Improvement: Emergency call based on extension's site (PC-1088)
- Bugfix: Fix sudoers permissions with escaux-fma (PC-837)
- Bugfix: Fix bad ETL expression in SDX6 resource generation (TS-879)
- Bugfix: Wrong permissions in tftpboot prevent UEP to fetch endpoint configuration (TS-2154)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Communication Server
TFTP Server
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.4 - Early deployment
Release notes
- Bugfix: PUM login/logout was failing (TS-1916)
- Bugfix: Fix typo on a queue ring strategy setting (leastrecent) (TS-1933)
- Bugfix: Revert module downgrade (TS-1909)
- Bugfix: "http(s)://" was not allowed in the browser navigation bar (TS-1604)
- Bugfix: Outgoingcall were failing (TS-1835)
- Bugfix: Specific incomingcallcatcher was not working (TS-1835)
- Bugfix: Gosub was executed even if hook does not exist (TS-1936)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Application Management Server
net.Console
TFTP Server
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.3 - Early deployment
Release notes
- Bugfix: Remove context Device in RestrictInternal (TS-1836)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.2 - Early deployment
Release notes
- Bugfix: Wrong package included in Cisco ATA Support (M0)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.1 - Early deployment
Release notes
- Improvement: Make optional creation of extension with MappDDI profile from LDAP Synchronization module (PC-1080)
- Bugfix: Add default and alternative callerid (PC-1339)
- Bugfix: Add missing translation (PC-1339)
- Bugfix: Access extensions from default context (TS-1540)
- Bugfix: Added missing Mitel firmware (PC-516)
- Bugfix: Prevent blank dropdown when listing extension through API (PC-1340)
- Bugfix: Configuration baddly displayed in ConnectMe (PC-1291)
- Bugfix: Callerid must be read only (PC-1291)
- Bugfix: Removed faulty ETL expr and replaced by default values in several modules (TS-1642)
- Bugfix: Fix wrong prompt translation (PC-1290)
- Bugfix: Missing support for Cisco ATA 191 (PC-482)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Cisco ATA Support
LDAP Synchronization
LDAP Synchronization v.1.15.3 (intermediate version) Show release notesHide release notes
- Bugfix: Don't generate error when no allowed ips are defined (M0)
LDAP Synchronization v.1.15.2 (intermediate version) Show release notesHide release notes
- Bugfix: Correctly pass UTF-8 through (TS-268)
LDAP Synchronization v.1.15.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow other sources to query LDAP (M24156)
SOP API
- SOP API v.5.14.0 Show release notesHide release notes
- Feature: Support multiple databases (PC-308)
- Feature: Support DNS for queue policy subscriptions (PC-841)
- Feature: Provide backup url for queue policy toggle (PC-686)
- Bugfix: Prevent apply-change error when no queue is configured (PC-1271)
- Bugfix: Prevent blank dropdown when listing extension (PC-1340)
- Bugfix: Fix issue causing callback loop when activating queue policy
Sounds
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.20.0 - Early deployment
Release notes
- Feature: Add API to upload prompts and MOH (PC-720)
- Feature: Added template resources for new Mitel phones (PC-0)
- Improvement: Add SMP API logging in SMPWebAudit (PC-1368)
- Improvement: Be able to skip specific actions when mobile number of a user is called (PC-1338)
- Improvement: Improve user's callflow regarding mobile call forwarding changes (PC-1338)
- Improvement: Expose voicemail email sender in SOP profile (PC-1012)
- Bugfix: Voicemail chat notification was not working when SDX6 was secondary phone (TS-1383)
- Bugfix: Contacts were duplicated in ConnectMe search (PC-1289)
- Bugfix: Use default context in custom presence callflow (PC-0)
- Bugfix: dbmonitor logs could fill disk space on standby SOPs (PC-541)
- Bugfix: Queue policy status redundancy puts back agents in queue (TS-1397)
- Bugfix: Missing database schema module upgrade for queue boards support (PC-0)
- Bugfix: AMI events blocks the SIP thread (PC-1193)
- Bugfix: Fix broken sudo for installation and upgrade (TS-1499)
- Dependency:
- SMP Application v5.15.1 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.37.0 Show release notesHide release notes
- Feature: Custom from user for subscriptions (PC-839)
- Improvement: Filtering out event categories from manager (PC-1193)
- Improvement: Dropping dialplan events by default (PC-1193)
- Improvement: Presence job filter without channels locking (PC-1427)
SOP API
SOP API v.5.13.0 (intermediate version) Show release notesHide release notes
- Feature: Expose API with vCards for queue policy of user (PC-813)
- Bugfix: Ensure extensions are sorted numerically in dbGetDirectoryInfoBody (PC-1289)
Database Schema
Database Schema v.3.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Align directory_entry last name size in SMP and SOP (PC-758)
Database Schema v.3.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: Leave dbmonitor if a delete request fails when archiving (PC-541)
File Manager
Polycom Phone Support
Polycom Phone Support v.5.15.1 (intermediate version) Show release notesHide release notes
- Bugfix: Wrong sudoers permissions (TS-1499)
- Deprecated: Breaks sudo (TS-1499)
New resource versions
Mitel6867
Mitel6873
Mitel6863
Mitel6869
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.19.0 - Early deployment
Release notes
- Feature: Added Stentophone support (PC-942)
- Feature: User can change his caller ID (PC-1053)
- Feature: Source SOP configuration and FMA support (PC-837)
- Feature: Make the display configurable in case of internal forward (PC-970)
- Feature: Add TemplateUserDefaults profile (PC-923)
- Feature: Added spoecific processing when the mobile phone of a user is called (PC-969)
- Feature: Configure Polycom Phone from FCC (PC-837)
- Feature: Cal Queue overview in Connect Me (PC-775)
- Feature: notify of new voicemail via chat (PC-652)
- Feature: Add business role parameter to presence (M0)
- Feature: Support storing penalty in queue_policy table (M0)
- Feature: HTTP AMI support (PC-314)
- Improvement: By default ring primary and secondary phone in the queue (PC-1030)
- Improvement: Improve presence notification performance (PC-314)
- Bugfix: No audio when HA module is used (TS-1199) (PC-832)
- Bugfix: Video rtp port were allocated for non-video calls (TS-1145)
- Bugfix: incorrect default countrycode (TS-1117)
- Bugfix: Incorrect labels on POlycom speedials (PC-803)
- Bugfix: Send report even when empty (PC-574)
- Bugfix: Default value of some profiles parameters were incorrect (TS-840)
- Bugfix: SVE resource should be monitored (PC-875)
- Bugfix: Preserve profile parameter when LDAP value is empty (TS-847)
- Bugfix: Queue members lost after asterisk crash (TS-689)
- Bugfix: Removed unssuported status page on Polycom SoundPoints (TS-648)
- Bugfix: Allow more characters in register password (TS-587)
- Bugfix: Busy tone played by user callflow was not always heard (TS-356)
- Bugfix: apply-change error on fax extension (TS-1237)
- Bugfix: Fixed "Average Converstation Duration" in reportCDR (TS-529)
- Bugfix: On login intentional status presence is not displayed (PC-759)
- Dependency:
- SMP Application v5.15.0 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Database Schema
Database Schema v.3.6.3 (intermediate version) Show release notesHide release notes
- Bugfix: Leave dbmonitor if a delete request fails when archiving (PC-541)
FAX Server
Unified End Point Support
Unified End Point Support v.2.3.3 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure escaux-devices-api is started at boot (PC-524)
System Base
System Base v.2.6.3 (intermediate version) Show release notesHide release notes
- Bugfix: Don't install irqbalance daemon by default (PC-538)
Cluster & SOP Active-Active Support
Cluster & SOP Active-Active Support v.4.1.1 (intermediate version) Show release notesHide release notes
- Improvement: Replaced CRON "RSync" scheduling by "LSyncd" for prompts (PC-111)
Cluster & SOP Active-Active Support v.4.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Optimize sync HTTP request computation (FMG-58)
Polycom Phone Support
Polycom Phone Support v.5.13.6 (intermediate version) Show release notesHide release notes
- Feature: Added support for Polycom Trio 8500 (PC-347)
- Feature: Added support for Polycom VVX 150 (PC-539)
SOP Base
SOP Base v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Don't restart xinetd (PC-581)
SOP Base v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: HTTP AMI support (PC-314)
Communication Server
- Communication Server v.3.36.1 Show release notesHide release notes
- Bugfix: Remove global video codec (TS-1145)
- Bugfix: Allow directrtpsetup when Dial option U and M are used (FMG-357)
Communication Server v.3.36.0 (intermediate version) Show release notesHide release notes
- Improvement: RTP bind address follows SIP TLS (PC-832)
- Improvement: Better support of privacy header (FMG-335)
- Bugfix: Crash on transfer with no header parameters (FMG-335) (TS-1214)
Communication Server v.3.35.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade libastphonenumber asterisk function (FMG-251)
- Improvement: Support short code checks on libastphonenumber (FMG-272)
- Improvement: Shared last call wrapup time between queues (PC-786)
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Bugfix: Semicolon issue on contact header (TS-395)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.3 (intermediate version) Show release notesHide release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.2 (intermediate version) Show release notesHide release notes
- Improvement: Expose "ignoresdpversion" asterisk option (FMG-254)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.1 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect semicolon on transfer contact header (TS-395)
- Bugfix: External voicemail notify script would reset permissions (PC-652)
- Bugfix: Avoid manager event on RTCP read (TS-513)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.0 (intermediate version) Show release notesHide release notes
- Improvement: res_json now based on libjansson to fix memory leak (PC-460)
- Improvement: libsrtp upgrade for SRTP stability (PC-692)
- Bugfix: Leak in AMI presence state reader (PC-737)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.33.1 (intermediate version) Show release notesHide release notes
- Bugfix: Duplicate presence job filter could deadlock on slow nodes (PC-667)
- Bugfix: Timestamps not played back correctly (TS-295)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.33.0 (intermediate version) Show release notesHide release notes
- Feature: Distributed device state (PC-210)
- Feature: AMI HTTP support (PC-314)
- Improvement: Increased AMI HTTP POST size (PC-314)
- Improvement: Forward SIP redirect URI parameters (FMG-118)
- Bugfix: Memory leak on PIDF NOTIFY parsing (TS-18)
- Bugfix: Crash in stringfields management (TS-12)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.32.0 (intermediate version) Show release notesHide release notes
- Feature: New channels and uptime SOP CLI commands (M24628) - link
- Feature: Create SIP peers using AMI (M25225) - link
- Feature: Create SIP outbound registrations using AMI (M25226) - link
- Improvement: Ensure SIPMute never blocks for too long (M25131) - link
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.31.3 (intermediate version) Show release notesHide release notes
- Improvement: RTP bind address follows SIP TLS (backport)(PC-832)
Communication Server v.3.31.2 (intermediate version) Show release notesHide release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.31.1 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in stringfields management (backport) (TS-12)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Turbine Ip Station Support
SOP API
SOP API v.5.12.1 (intermediate version) Show release notesHide release notes
- Bugfix: Do not remove users from queues with legacy members (TS-567)
SOP API v.5.12.0 (intermediate version) Show release notesHide release notes
- Bugfix: Support queues on multiple sops (PC-660)
- Improvement: Get value of a variable via API ccGetChannels (PC-654)
SOP API v.5.11.5 (intermediate version) Show release notesHide release notes
- Bugfix: Intentional status presence was lost after queue presence update (backport) (TS-3050)
SOP API v.5.11.4 (intermediate version) Show release notesHide release notes
- Bugfix: Do not remove users from queues with legacy members (TS-567)
SOP API v.5.11.3 (intermediate version) Show release notesHide release notes
- Improvement: Open firewall rules (FMG-221)
- Bugfix: Use context 'default' for presence (PC-314) (TS-382)
- Bugfix: Skip queues where no configuration is set (TS-384)
SOP API v.5.11.2 (intermediate version) Show release notesHide release notes
- Bugfix: Use boolean instead of integer to indicate presence
- Bugfix: Fix sorting in dbGetDirectoryInfo
- Bugfix: Ensure queue policy reload exits if no response from asterisk
SOP API v.5.11.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix issue preventing to set queue policy state
New resource versions
Yealink T42S
Yealink T46S
Yealink T53W
Yealink T57W
Yealink T41P
SIP Trunk
SIP Trunk v.2.6.1 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect source ip of RTP packet on HA configuration (TS-173)
SyncLDAP
- SyncLDAP v.2.0.5 Show release notesHide release notes
- Bugfix: restore primary and secondary phone provisioning (TS-641)
- Bugfix: preserve profile parameter when ldap value is empty (TS-847)
SyncLDAP v.2.0.4 (intermediate version) Show release notesHide release notes
- Bugfix: Convert first and last name from SMP to UTF-8 (TS-268)
- Bugfix: DDIs no synced any more (TS-277)
SyncLDAP v.2.0.3 (intermediate version) Show release notesHide release notes
- Bugfix: Task failed with profile parameter different from Template-User (M24648)
- Deprecated: DDIs no synced any more (TS-277)
PolycomVVX500
PolycomVVX500 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX500 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX500 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
Polycom Virtual Phone
ReportQDR
ReportQDR v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed variable escaping (TS-14)
PolycomIP331
PolycomIP331 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP331 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP331 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP335
PolycomIP335 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP335 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP335 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP450
PolycomIP450 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP450 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP450 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP550
PolycomIP550 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP550 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP550 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP560
PolycomIP560 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP560 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP560 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP6000
PolycomIP6000 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP6000 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP6000 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP650
PolycomIP650 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP650 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP650 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP670
PolycomIP670 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP670 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP670 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP7000
PolycomIP7000 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP7000 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP7000 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomTrio8500
PolycomVVX101
PolycomVVX101 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX101 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX101 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX1500
PolycomVVX1500 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX1500 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX1500 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX201
PolycomVVX201 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX201 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX201 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX250
PolycomVVX250 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX250 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX300
PolycomVVX300 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX300 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX300 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX301
PolycomVVX301 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX301 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX301 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX310
PolycomVVX310 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX310 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX310 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX311
PolycomVVX311 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX311 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX311 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX400
PolycomVVX400 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX400 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX400 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX401
PolycomVVX401 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX401 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX401 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX410
PolycomVVX410 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX410 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX410 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX411
PolycomVVX411 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX411 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX411 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX450
PolycomVVX450 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX450 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX501
PolycomVVX501 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX501 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX501 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX600
PolycomVVX600 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX600 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX600 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX601
PolycomVVX601 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX601 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX601 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
ReportCDR
ReportCDR v.2.17.0 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed SQL injection in summary report (M25582) - link
- Bugfix: Fixed duration for queued calls (TS-529)
- Improvement: Display the original called number (M20719) - link
- Improvement: Allow not operator "!" in filters (M20005) - link
- Improvement: Added filters "start_hour" and "end_hour" (M22496) - link
- Improvement: Added a mysql query timeout (M23755) - link
- Deprecated: Changes in var_X were not persistent
ReportCDR v.2.16.0 (intermediate version) Show release notesHide release notes
- Improvement: Implemented additional filter set (M19500) - link
- Bugfix: CSV report output could not be read by some tools because of a character encoding issue (M14735) - link
- Bugfix: The comma separated report output was not correct (M15842) - link
ReportCDR v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Added "usertag" and "usernote" CDR fields (M13662) - link
ReportCDR v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: sort by summarized columns
ReportCDR_Q
Stentofon Turbine Ip Station
- Stentofon Turbine Ip Station v.1.4.0 Show release notesHide release notes
- Bugfix: NTP server should be the SOP (PC-942)
- Bugfix: The firmware to be downloaded is defined by the module (PC-942)
New action versions
- STARTNULLAPPLICATION.1.0.0
STARTDYNAMICAPPLICATION.8.8.0
Included components
Modules
Resources
Actions
Version 4.18.0 - Early deployment
Release notes
- Feature: Notify of new voicemail via chat (PC-652)
- Feature: Enable LargeInternalDirectory (PC-469)
- Improvement: Fix directory patterns and use normal redir (PC-469)
- Improvement: Fix OutgoingCallCatcher with LargeInternalDirectory (MCH-479)
- Improvement: Fix IntraCluster routing with LargeInternalDirectory (PC-965)
- Improvement: Use startdynamicapplication for Template-MapDDI profile (PC-760)
- Improvement: Replace Redirect by GotoExtension in several callflows (PC-760)
- Improvement: Old receptionist callflow not used anymore removed (PC-760)
- Dependency:
- SMP Application v5.15.0 or higher
- Custom callflow: redirect to an internal extension must be done via the GotoExtension action instead of Redirect
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.6 - Early deployment
Release notes
- Bugfix: Backport fix typo breaking Fusion presence (TS-3050)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.5 - Early deployment
Release notes
- Bugfix: dbmonitor logs fill disk space (PC-541)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.34.3 Show release notesHide release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
- Communication Server v.3.34.2 (intermediate version) Show release notesHide release notes
- Improvement: Expose "ignoresdpversion" asterisk option (FMG-254)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.1 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect semicolon on transfer contact header (TS-395)
- Bugfix: External voicemail notify script would reset permissions (PC-652)
- Bugfix: Avoid manager event on RTCP read (TS-513)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Database Schema
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.2 - Early deployment
Release notes
- Bugfix: Legacy members where removed from queues at apply changes (TS-567)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.17.1 - Early deployment
Release notes
- Bugfix: Missing parameter NotifyFormat in Template-SipTrunk profile (TS-385)
- Bugfix: PC-314 Use context 'default' everywhere (TS-382)
- Bugfix: PC-314 deactivate virtual extensions (TS-177)
- Bugfix: PC-314 Use context 'default' in SOP API (TS-382)
- Bugfix: Disable CDR for presence (PC-784)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- SOP API
- SOP API v.5.11.3 Show release notesHide release notes
- Improvement: Open firewall rules (FMG-221)
- Bugfix: Use context 'default' for presence (PC-314) (TS-382)
- Bugfix: Skip queues where no configuration is set (TS-384)
Cluster & SOP Active-Active Support
New resource versions
No new resource versions.
New action versions
- STARTDYNAMICAPPLICATION.8.8.0
Included components
Modules
Resources
Actions
Version 4.17.0 - Early deployment
Release notes
- Feature: Allow to apply queue policies by parameter (PC-153)
- Feature: direct device calling through cluster (PC-209)
- Feature: Added support for Yealink T41P/T42S/T46S/T53W/T57W (PC-366)
- Feature: Added support for Cisco ATA 191 (PC-482)
- Improvement: Upgrade mserver to fix defence performance (PC-100)
- Improvement: Updated Fax Server (PC-109)
- Improvement: Replaced CRON "RSync" scheduling by "LSyncd" for prompts (PC-111)
- Improvement: Improve join/leave empty granularity (PC-120)
- Improvement: distributed device configurable (PC-210)
- Improvement: Install Fusion API (PC-310)
- Improvement: Use FusionSetPresence in callflow (PC-314)
- Improvement: Directory-centric queues for FleetManager integration (PC-434)
- Improvement: add busy tone as 2nd action (PC-466)
- Improvement: Add translation for status OutOfOffice (PC-485)
- Improvement: Ensure escaux-devices-api is started (PC-524)
- Improvement: Upgraded Polycom resources to 5.14.0 (PC-539)
- Improvement: Added RestrictEmergency (PC-555)
- Improvement: Disable net.console and mserver by default (PC-556)
- Improvement: Update system base, sop base, tftp (PC-581)
- Improvement: Update reportQDR to version 2.2.0 (TS-14)
- Improvement: removed completely deprecated idle url (O-10327979)
- Bugfix: Fixed parameters QueueRule and RingallRetry (PC-672)
- Bugfix: Bad called format for calls from FMU phones (TS-159)
- Bugfix: Incorrect RTP source IP with HA (TS-173)
- Bugfix: Bad prompt name UserSick in CallQueuer (TS-176)
- Bugfix: no queue policies in dialplan (MCH-249)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
FAX Server
- FAX Server v.2.8.0 Show release notesHide release notes
- Improvement: removed resource intensive defence script (PC-109)
- Deprecated: restore missing directory for fax server users (TS-13)
Application Management Server
Database Schema
Polycom Phone Support
Cisco ATA Support
SOP API
- SOP API v.5.11.2 Show release notesHide release notes
- Bugfix: Use boolean instead of integer to indicate presence
- Bugfix: Fix sorting in dbGetDirectoryInfo
- Bugfix: Ensure queue policy reload exits if no response from asterisk
SOP API v.5.11.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix issue preventing to set queue policy state
SOP API v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support default state per queue policy (PC-313)
- Feature: Expose Profile Parameters in Fusion Presence (PC-310)
- Improvement: Fusion Presence centralized refresh (PC-314)
- Bugfix: Status synchronization failed when status permissions was configured (FMG-128)
Cluster & SOP Active-Active Support
Cluster & SOP Active-Active Support v.4.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Optimize sync HTTP request computation (FMG-58)
Communication Server
- Communication Server v.3.34.0 Show release notesHide release notes
- Improvement: res_json now based on libjansson to fix memory leak (PC-460)
- Improvement: libsrtp upgrade for SRTP stability (PC-692)
- Bugfix: Leak in AMI presence state reader (PC-737)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.33.1 (intermediate version) Show release notesHide release notes
- Bugfix: Duplicate presence job filter could deadlock on slow nodes (PC-667)
- Bugfix: Timestamps not played back correctly (TS-295)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.33.0 (intermediate version) Show release notesHide release notes
- Feature: Distributed device state (PC-210)
- Feature: AMI HTTP support (PC-314)
- Improvement: Increased AMI HTTP POST size (PC-314)
- Improvement: Forward SIP redirect URI parameters (FMG-118)
- Bugfix: Memory leak on PIDF NOTIFY parsing (TS-18)
- Bugfix: Crash in stringfields management (TS-12)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.32.0 (intermediate version) Show release notesHide release notes
- Feature: New channels and uptime SOP CLI commands (M24628) - link
- Feature: Create SIP peers using AMI (M25225) - link
- Feature: Create SIP outbound registrations using AMI (M25226) - link
- Improvement: Ensure SIPMute never blocks for too long (M25131) - link
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
New resource versions
ReportQDR
- ReportQDR v.2.2.0 Show release notesHide release notes
- Improvement: show duration in minutes (M25421)
- Bugfix: filters didn't work anymore (TS-14)
- Deprecated: Wrong variable escaping (TS-14)
ReportQDR v.2.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Implemented additional set of filters (M21611)
- Improvement: Keep the temporary db table for debugging (M0)
- Improvement: Allow not operator "!" in filters (M20005)
- Feature: Allow selection of displayed columns in a summary report (M24803)
- Deprecated: Filters don't work on this version (TS-14)
ReportQDR v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Report on a long range of time was slow (TS-2169)
PolycomIP331
PolycomIP331 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP331 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP335
PolycomIP335 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP335 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP450
PolycomIP450 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP450 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP550
PolycomIP550 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP550 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP560
PolycomIP560 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP560 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP6000
PolycomIP6000 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP6000 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP650
PolycomIP650 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP650 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP670
PolycomIP670 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP670 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP7000
PolycomIP7000 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP7000 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomTrio8500
PolycomVVX101
PolycomVVX101 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX101 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX1500
PolycomVVX1500 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX1500 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX201
PolycomVVX201 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX201 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX250
PolycomVVX250 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX300
PolycomVVX300 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX300 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX301
PolycomVVX301 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX301 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX310
PolycomVVX310 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX310 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX311
PolycomVVX311 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX311 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX400
PolycomVVX400 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX400 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX401
PolycomVVX401 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX401 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX410
PolycomVVX410 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX410 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX411
PolycomVVX411 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX411 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX450
PolycomVVX450 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX500
PolycomVVX500 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX500 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX501
PolycomVVX501 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX501 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX600
PolycomVVX600 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX600 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomVVX601
PolycomVVX601 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX601 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
Cisco ATA 191
Yealink T42S
Yealink T46S
Yealink T53W
Yealink T57W
Yealink T41P
New action versions
- STARTNULLAPPLICATION.1.0.0
Included components
Modules
Resources
Actions
Version 4.16.8 - Early deployment
Release notes
- Bugfix: Wrong source IP in SDP for RTP binding in case of TLS (PC-832)
- Bugfix: SVE resource should be monitored (PC-875)
- Bugfix: Remove global SIP rtpbindaddr (TS-1199)(PC-832)
- Bugfix: dbmonitor logs fill disk space (PC-541)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
SOP Base
SOP Base v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: HTTP AMI support (PC-314)
System Base
Communication Server
Communication Server v.3.31.2 (intermediate version) Show release notesHide release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.31.1 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in stringfields management (backport) (TS-12)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Database Schema
New resource versions
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.5 - Early deployment
Release notes
- Bugfix: Upgrade system base to remove irqbalance daemon install (PC-538)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.4 - Early deployment
Release notes
- Bugfix: Missing includes to required libraries (PC-598)
- Bugfix: Wrong name for some template resources (PC-598)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.3 - Early deployment
Release notes
- Bugfix: Upgrade SOP API module (PC-643)
- Bugfix: Incorrect RTP source IP with HA (TS-173)
- Bugfix: Restore IP331 resource template (TS-197)
- Bugfix: Disable additional codecs on VVX videophone (TS-178)
- Bugfix: Upgrade custom resources during template upgrade (PC-598)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.2 - Early deployment
Release notes
- Bugfix: Ensure escaux-devices-api is started (PC-524)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Unified End Point Support
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.1 - Early deployment
Release notes
- Bugfix: Missing NotifyFormat parameter in Template-SipTrunk profile (TS-111)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.16.0 - Early deployment
Release notes
- Feature: Added template resources for VVX 250 & 450 (M25185)
- Feature: Added template resource for ReportCDR_Q (M0)
- Improvement: Migrate Z-Provisioning-SOA1 profile to legacy Template-SipTrunk (M22348)
- Improvement: Template upgrade support Fusion 4.5.0 (M20954)
- Improvement: Upgraded Polycom Support module to latest version 5.13.5 (M25185)
- Improvement: CIsco ATA firmware upgrade support (PC-60)
- Improvement: Set more permissive access-rights for some SOP profile parameters (M25613)
- Bugfix: align SOP language parameters (PC-130)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Network v.3.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: network interfaces sometimes don't come up when using bond interfaces on a vSOP host (M17981) - link
Network v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support for automatic failover to standby server (M0)
- Feature: Support active-standby link aggregation with bond interfaces (M11308) - link
Network v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to reconfigure the network without cutting the SMP Connection (M0)
Certificate Generator
Software sources
Software sources v.1.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: installation failed on a newly installed host (M22153) - link
Software sources v.1.3.0 (intermediate version) Show release notesHide release notes
- Feature: add a tool to retrieve apt sources
- Feature: support additional repositories with configuration files
- Improvement: don't install "Recommends" packages by default
- Bugfix: add missing updates repositories
- Bugfix: update sources on package upgrade
Unified End Point Support
Unified End Point Support v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Improve performance during apply changes. Better usage of cache (M0)
Cluster & SOP Active-Active Support
Cluster & SOP Active-Active Support v.4.0.3 (intermediate version) Show release notesHide release notes
- Bugfix: Allow upgrade of packages (M0)
Cluster & SOP Active-Active Support v.4.0.2 (intermediate version) Show release notesHide release notes
- Improvement: Sync file data when the daemon start (M22723) - link
- Bugfix: Avoid to delete file during lsyncd start (M22723) - link
Cluster & SOP Active-Active Support v.4.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Speed up the retry when the HTTP to other cluster fails (M22194) - link
- Bugfix: Avoid issue on vSOP start (M22194) - link
- Bugfix: Check if Asterisk Manager is running (M22194) - link
Cluster & SOP Active-Active Support v.4.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support file sync (M21530) - link
- Feature: Remove critical cron - use daemons (M19664) - link
- Feature: Fast retry in case of sync failure (M19664) - link
- Improvement: Remove forking in perl code (M19664) - link
- Improvement: Package split (M19664) (M21530) - link
Cluster & SOP Active-Active Support v.3.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Collect profile parameters list for all extensions (M22011) - link
Cluster & SOP Active-Active Support v.3.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow the status synchronisation (M21819) - link
- Bugfix: Don't sync if asterisk is not running (M21850) - link
Cluster & SOP Active-Active Support v.3.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Review sync of profile parameters (M20353) - link
Cluster & SOP Active-Active Support v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Add support for the third interface (M19687) - link
- Bugfix: Use interface configured in each the module for all sop in the cluster (M19687) - link
PUM
- PUM v.3.6.0 Show release notesHide release notes
- Improvement: Converted to debian packaging (M23654)
- Bugfix: Fixed dependencies issues causing both login and logout to fail (M23936)
net.Console
Unified Communication Model
System Base
- System Base v.2.6.1 Show release notesHide release notes
- Bugfix: It was not possible to change a dynamic provide by another one (M24076) - link
- Bugfix: Fixed errors generated by escaux-base during the apply changes (M24850) - link
Database Schema
Database Schema v.3.6.1 (intermediate version) Show release notesHide release notes
- Improvement: Add active field in queue policy to support 'default' value (M22489)
Communication Server
- Communication Server v.3.31.0 Show release notesHide release notes
- Feature: Force outgoing subscriptions refresh (M24751) - link
- Improvement: Filter duplicate presence callflow runs (M21224) - link
- Improvement: Activated extension pickup (M19406) - link
- Improvement: Check database integrity before startup (M24855) - link
- Improvement: Handle SQL escape character in dialplan function (M24367) - link
- Improvement: Don't respawn the process on normal exit status (M25017) - link
- Improvement: Set global flag of newly created endpoint abstraction resources (M25176) - link
- Bugfix: Exit when SIP TLS binding fails (M24590) - link
- Bugfix: Fix dependencies required by process-voicemail (M25021) - link
- Bugfix: Play date/time announcement in voicemail (M23149) - link
- Bugfix: Firewall support for TCP SIP (M24404) - link
- Bugfix: Crash in app_queue null CDR (M24750) - link
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.30.3 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in stringfields management (backport) (TS-12)
Communication Server v.3.30.2 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in app_queue ring_entry under load (M24750) - link
Communication Server v.3.30.1 (intermediate version) Show release notesHide release notes
- Bugfix: Date/time announcement was not played in voicemail (M23149) - link
- Bugfix: Open firewall TCP connection on port 5060 (M24404) - link
Communication Server v.3.30.0 (intermediate version) Show release notesHide release notes
- Feature: Set presence from manager (M24128) - link
Communication Server v.3.29.1 (intermediate version) Show release notesHide release notes
- Bugfix: Memory tracking was left activated (M23927) - link
High Availability
Gigaset Phone Support
Gigaset Phone Support v.1.3.0 (intermediate version) Show release notesHide release notes
- Bugfix: Upgraded Gigaset N720 IP PRO firmware to v113 (M23641)
Mitel Phone Support
SSH Peer Connectivity
SSH Peer Connectivity v.1.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Incomplete known_hosts after cluster installation (M25598)
SSH Peer Connectivity v.1.3.0 (intermediate version) Show release notesHide release notes
- Improvement: Update known_hosts on each SOP during SOP re-installation (M22723)
- Bugfix: Avoid install error on .ssh directory (M22723)
SSH Peer Connectivity v.1.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fix race condition when modules are not installed simultaneously on all sops in the cluster on first installation. (M22250)
SSH Peer Connectivity v.1.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: SSH connectivity was not working on baseline 2 vSop's. (M18406)
SSH Peer Connectivity v.1.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Replace deprecated DSA algorithm with RSA. (M15528)
- Potential update impact level 1
: no critical impact expected. Update can be applied without risk of breaking critical functionality.: Upgrade on all SOP's in the cluster at the same time.
SSH Peer Connectivity v.1.1.0 (intermediate version) Show release notesHide release notes
- Bugfix: Peer connectivity was not working on VSOP (M16212)
Cisco ATA Support
Polycom Phone Support
Polycom Phone Support v.5.13.4 (intermediate version) Show release notesHide release notes
- Bugfix: Local Admin password not set correctly on SOP (M24266)
- Bugfix: Phone reboot from SMP was not working (M24266)
New resource versions
net.Console X700
net.Console X700 v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to annotate the call with extra informations (M13662)
GigasetN720SAT
GigasetN870IP
PhoneZeroConf
PhoneZeroConf v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Write separate config outside of gen_extensions (M19660)
PolycomIP550
PolycomIP670
PolycomIP560
PolycomIP335
PolycomVVX500
PolycomVVX1500
PolycomVVX600
PolycomVVX501
PolycomVVX601
PolycomVVX601 v.5.10.2 (intermediate version) Show release notesHide release notes
GigasetN870SAT
SyncCDRDB
SyncCDRDB v.3.0.2 (intermediate version) Show release notesHide release notes
- Bugfix: Dst first name/last name and agent device owner were missing for a cluster config (M23609)
SyncCDRDB v.3.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: CDR of calls to extension looking like a callflows id were dropped (M23230)
ReportCDR_Q
Polycom Virtual Phone
Polycom Virtual Phone v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Default password was always used (M0)
Polycom Virtual Phone v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to set a fifth softkey (M20555)
- Feature: Allow to disable redundant transfer softkey (M20555)
Unified End Point SIP peer
Unified End Point SIP peer v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Added contact group in parameters of the SDX6
- Feature: Add the option to accept incoming caller id
GigasetN510IP
GigasetN510IP v.1.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: Removed parameter "handset_id" (M23057)
GigasetN720IP
GigasetN720IP v.1.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: Removed parameter "order" (M23057)
Cisco SPA112
Cisco SPA112 v.1.18.0 (intermediate version) Show release notesHide release notes
- Feature: Centralized provisioning (M21451)
- Improvement: Add RTP range ID (M21483)
- Improvement: Removed default SIP password and made it configurable (M21483)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: SIP password field is now required, empty value not allowed (M21483)
PolycomVVX250
PolycomVVX450
New action versions
Included components
Modules
Resources
Actions
Version 4.14.4 - Early deployment
Release notes
- Bugfix: net.Console removed from queue at apply changes (M25187)
- Bugfix: Update Application Management Server (PC-100)
- Bugfix: Update Fax Server (PC-109)
- Bugfix: VCS tool updated (M0)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
| Restart mserver |
| Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
SOP API v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to set state for one/all queue policies of a user (M25122)
- Bugfix: Allow to unset a profile parameter (M0)
- Deprecated: Allow to set state for one/all queue policies of a user does not work (M25122)
SOP API v.5.9.4 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure queue policy reload exits if no response from asterisk (TS-200)
SOP API v.5.9.3 (intermediate version) Show release notesHide release notes
- Bugfix: Improve speed of 50-queue-policy-apply (TS-10)
SOP API v.5.9.2 (intermediate version) Show release notesHide release notes
- Bugfix: Expose for each extension, the supervised extensions. (backport) (TS-10)
- Bugfix: only expose penalty when set in policy (backport) (TS-11)
SOP API v.5.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: On apply-change members could be removed from queues (M24889) - link
SOP API v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Allow a user to manage the queue policies of all extensions (M24479) - link
- Deprecated: On apply-change members could be removed from queues (M24889) - link
SOP API v.5.8.0 (intermediate version) Show release notesHide release notes
- Feature: Add fusionGetQueue (M24366) - link
- Bugfix: Ensure dbGetCallflow generates valid JSON (M24199) - link
- Bugfix: Ensure callhistory generates valid JSON (M24199) - link
- Bugfix: When default QP is "login" the QP must be changed manually before status can manage it (M24350) - link
- Deprecated: On apply-change members could be removed from queues (M24889) - link
SOP API v.5.7.3 (intermediate version) Show release notesHide release notes
- Bugfix: When default QP is "login", the QP must be changed manually before status can manage it (M24350) - link
- Deprecated: Unused version (M0)
SOP API v.5.7.2 (intermediate version) Show release notesHide release notes
- Bugfix: Set user agent during the profile sync in active active mode (M23613) - link
- Bugfix: Ensure dbGetCallflow generates valid JSON (M24199) - link
- Bugfix: Ensure callhistory generates valid JSON (M24199) - link
- Deprecated: On apply-change members could be removed from queues (M24889) - link
Application Management Server
FAX Server
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.14.3 - Deprecated
Release notes
- Bugfix: Upgrade mserver to fix defence performance (PC-100)
- Bugfix: Update fax server (PC-109)
- Deprecated: Wrong schema for queue resource template (M0)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Migrate Queue resource from template AQA0Z001 to AQA0Z000 prior to the upgrade |
| Restart mserver |
| Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
- FAX Server
- FAX Server v.2.8.0 Show release notesHide release notes
- Improvement: removed resource intensive defence script (PC-109)
- Deprecated: restore missing directory for fax server users (TS-13)
Application Management Server
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.14.1 - Deprecated
Release notes
- Bugfix: Fixed Polycom phone reload when firmware update scheduled (M23915)
- Bugfix: Switch back to free license for few profiles (M23903)
- Bugfix: Remove netDesktop dep for extra status (M23939)
- Bugfix: Queue member sync dependency (M22489)
- Bugfix: Pum broken (M23936)
- Bugfix: Disable MALLOC_DEBUG in CS release build (M23927)
- Bugfix: Disable monitoring via template (M23403)
- Improvement: Create service on APL domain by default (M23881)
- Improvement: Aligned softkeys config for all Polycom resources (M24079)
- Improvement: Add more sip parameters (M23243)
- Improvement: Updated user profile doc with new features (M23914)
- Improvement: Updated sop profile doc with new features (M23913)(M23915)
- Deprecated: On apply-change members could be removed from queues (M24889)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart mserver |
| Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
Polycom Phone Support
- Polycom Phone Support v.5.13.3 Show release notesHide release notes
- Improvement: make sure updated phone are properly rebooted (M23915)
- Improvement: updated polycom-drivers.deb version (M23915)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.14.0 - Early deployment
Release notes
- Feature: Send RPID to UEP (M15151)
- Feature: Allow extension with dashes in SOP API (M21945)
- Feature: Allow to select MOH in Template-CallQueuer profile (M22733)
- Feature: Added HA email notification (M21893)
- Feature: Support Cisco ATA over Internet (M21483)
- Feature: Added fleet role for restricted user profile view (M22487)
- Feature: Add fleetmanager roles (M22785)
- Improvement: SOP API uses crypt hash in secure mode (M9471)
- Improvement: Set queue policy to Off (M22489)
- Improvement: Added phone reload in case of HA switchover (M22617)
- Improvement: HA CLI improvement (M22617)
- Improvement: Custom voicemail extension for IVR (M22833)
- Improvement: Clarify profile layout and help for IVR and CallQueuer profiles (M22833)
- Improvement: Added EMAIL field to ShortNumber fleet view (M22661)
- Improvement: Prevent minutely fork of ifconfig (M23110)
- Improvement: Support remaining Polycom SP IP phones over internet (M23171)
- Improvement: Department exposed in the Fleetmanager (M22531)
- Improvement: Set default value for raise penalty (M22177)
- Improvement: Expose Template-SOP in fleetmanager (M22785)
- Improvement: Keep allign Queue configuration in Fusion's user-profile and the queues' members (M22613)
- Improvement: Support labels for queue policies (M22495)
- Improvement: Set limit to 30 devices for Gigaset N720 Sat (M23057)
- Improvement: Upgrade to bugfix VVX firmware 5.9.2 (M23502)
- Bugfix: Fixed /tftpboot permissions (M4235)
- Bugfix: Fix profile license for Fuzer (M18232)
- Bugfix: Restore hook before status change (M21894)
- Bugfix: Prevent proxy.pl from listening on 5050 (M6835)
- Bugfix: Bypass authentication for PUM logout (M22858)
- Bugfix: Adapt authentication check in PUM callflow (M22858)
- Bugfix: No voice after unhold when srtp is enable for Polycom SP IP phones (M22965)
- Bugfix: UEP transfer support for Polycom (M20555)
- Bugfix: Polycom Local Directory was not allowed (M22314)
- Bugfix: CDR of calls to extension looking like a callflows id were dropped (M23230)
- Bugfix: Removed order from Gigaset N510/N720 (M23057)
- Bugfix: Net.Console failed to start when default route was set on eth1 (M22636)
- Bugfix: Fixed net.Console speeddials on Windows 10 (M23256)
- Bugfix: Zerofconf task was not working in some conditions (M23271)
- Bugfix: Disable access code for Gigaset phones (M23100)
- Bugfix: VoicemailExtension in CallQueuer is now optional (M22833)
- Bugfix: Ringall and all agents busy does not raise the selected penalty (M22177)
- Bugfix: Fix permissions on user roles (M22785)
- Bugfix: Fix layout issue in TemplateUser profile (M0)
- Bugfix: Video was not working in some conditions when SRTP was enabled (M22350)
- Bugfix: Call waiting broken for some actions (M23496)
- Bugfix: German prompts corrections (M23483)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
LDAP Synchronization
File Manager
File Manager v.2.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Package refactoring and apt installation (M16550) - link
File Manager v.1.5.0 (intermediate version) Show release notesHide release notes
- Bugfix: Correct path to credentials file for baseline >= 3.0.0 (M0)
- Feature: Added firewall rules file (M13989) - link
File Manager v.1.4.9 (intermediate version) Show release notesHide release notes
- Improvement: By default, WebDAV didn't include a link to the fileman/files/contacts. (M11966) - link
File Manager v.1.4.8 (intermediate version) Show release notesHide release notes
- Improvement: Expose DAV network captures directory (M11068)
- Improvement: Expose server logs through DAV (M0)
PUM
System Base
- System Base v.2.6.0 Show release notesHide release notes
- Feature: Reliable sopsync when profile parameter change (M22067) - link
- Improvement: Avoid forking processes every minute when verifying connection to the SMP (M23110) - link
- Bugfix: Remove duplicate package escaux-evaluate (M22617) - link
- Bugfix: Restored CGIRPC required by PUM and Cluster Sync (M23654) - link
System Base v.2.5.3 (intermediate version) Show release notesHide release notes
- Feature: Support monitoring of core dumps (MCH-29)
System Base v.2.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Could not publish SSH public key from CLI (M21889) - link
System Base v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: allow to reread configuration files by daemon processes. (M17451) - link
SOP Base
High Availability
- High Availability v.5.1.0 Show release notesHide release notes
- Improvement: Display remote machine status (M22617)
- Improvement: Propose db slaving when going to standby (M22617)
- Improvement: Command 'ha standby' now available in root (M22617)
- Feature: Added email notification (M21893)
net.Console
net.Console v.3.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: set default route on eth0 (M22636)
Communication Server
- Communication Server v.3.29.0 Show release notesHide release notes
- Feature: Default channel timeout (M22735) - link
- Feature: Unlimited custom HTTP headers from dialplan HASH (M23267) - link
- Improvement: Update libastphonenumber library (M23774) - link
- Bugfix: ringall and all agents busy does not raise the selected penalty (M22177) - link
- Bugfix: Possible deadlock during REFER (M23467) - link
- Deprecated: Memory tracking was left activated (M23927) - link
Communication Server v.3.28.1 (intermediate version) Show release notesHide release notes
- Improvement: Don't install regflag manager module when configuration is not set (M23395) - link
- Bugfix: Packaging issue (M23395) - link
Communication Server v.3.28.0 (intermediate version) Show release notesHide release notes
- Feature: Migrate MWI NOTIFY to callflow hook (M23255) - link
- Improvement: Support libSS7 version 2 (M16321) - link
- Improvement: Reliably sync the profile status and the register flag (M22644) - link
- Deprecated: Installation issue (M23395) - link
Communication Server v.3.27.3 (intermediate version) Show release notesHide release notes
- Bugfix: Allow SayUnixTime to say date only (M22653) - link
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (M2925) - link
- Bugfix: Reference leak on failed transfer prevents RTP port clearing (M23001) - link
- Bugfix: Remove odbc idle check causing crashes (M17872) - link
Communication Server v.3.27.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fix crash on MWI subscription start or stop after DNS update (M22408) - link
Communication Server v.3.27.1 (intermediate version) Show release notesHide release notes
- Bugfix: Preferred device causing queue to only call that one device until timeout (M22267) - link
- Bugfix: Avoid locking during quick SIPMute use (M22474) - link
- Improvement: Add SIPMute manager command for easier synchronous use (M22474) - link
Gigaset Phone Support
Gigaset Phone Support v.1.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed file permissions (M4235)
- Bugfix: Fixed order entries for Gigaset N720 IP/SAT and Gigaset (M23057)
- Bugfix: Removed unused configuration files (M23058)
- Bugfix: Disabled access code for VoIP lines (M23100)
- Improvement: Deactivated call forward on Gigaset N720 DM PRO (M20377)
SOP API
- SOP API v.5.7.1 Show release notesHide release notes
- Improvement: Keep in-line Queues configuration in Fusion's user profile and actual dynamic queue 's members (M22613) - link
- Deprecated: On apply-change members could be removed from queues (M24889) - link
SOP API v.5.7.0 (intermediate version) Show release notesHide release notes
- Improvement: Use crypt password for secure mode (M9471) - link
- Feature: Allow extension with dashes (M21945) - link
- Feature: Allow queue policy to be 'On' by default (M22489) - link
- Bugfix: Prevent proxy.pl from listening on 5050 (M6835) - link
- Deprecated: Queue members lost after apply-change (M22613) - link
SOP API v.5.6.1 (intermediate version) Show release notesHide release notes
- Improvement: Update attribute log when the status change and propagating timestamp is set (M22011) - link
- Bugfix: Avoid error when status constrains is not set (M22011) - link
- Bugfix: Syntax errors (M22011) - link
Sounds
Sounds v.2.1.3 (intermediate version) Show release notesHide release notes
- Bugfix: Sounds module does not download prompts (M20437)
Polycom Phone Support
- Polycom Phone Support v.5.13.2 Show release notesHide release notes
- Bugfix: Bump VVX firmware from 5.9.1 to 5.9.2 (M23502)
- Bugfix: USB port warning displayed when using PoE (M23502)
- Bugfix: Wrong call log dates with some NTP servers (M23502)
Polycom Phone Support v.5.13.1 (intermediate version) Show release notesHide release notes
- Bugfix: Auto reload configuration flag was not working (M23346)
Polycom Phone Support v.5.13.0 (intermediate version) Show release notesHide release notes
- Feature: Upgraded FW to 4.0.14 for SPIP and 5.9.1 for VVX (M22966)
Polycom Phone Support v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade firmware for internet support on all remaining SPIP (330,450,550,560,670) (M23140)
- Feature: Added phone reset command (M22982)
- Improvement: Use crypt password for authentication (M22401)
- Bugfix: Local directory download was restricted when using firmware upgrade schedule (M22314)
- Deprecated: Intermediate release never used in production; higher version to be used instead (M0)
New resource versions
SyncLDAP
- SyncLDAP v.2.0.2 Show release notesHide release notes
- Bugfix: Data from previous imported user, extension, ddi were copied to next entry when template are used (M23224)
- Bugfix: Import of new user was failing when a template user was configured (M23224)
- Deprecated: DDIs no synced any more (TS-277)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.13.2 - Early deployment
Release notes
- Bugfix: Custom presence state update was broken (M22693)
- Bugfix: Revert SSH Peer Connectivity installation (M22693)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- SSH Peer Connectivity
- SSH Peer Connectivity v.1.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Replace deprecated DSA algorithm with RSA. (M15528)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Upgrade on all SOP's in the cluster at the same time.
SSH Peer Connectivity v.1.1.0 (intermediate version) Show release notesHide release notes
- Bugfix: Peer connectivity was not working on VSOP (M16212)
Network
Network v.3.1.0 (intermediate version) Show release notesHide release notes
- Feature: Add unlimited number of route (M18543) - link
Network v.3.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: network interfaces sometimes don't come up when using bond interfaces on a vSOP host (M17981) - link
Network v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support for automatic failover to standby server (M0)
- Feature: Support active-standby link aggregation with bond interfaces (M11308) - link
Network v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to reconfigure the network without cutting the SMP Connection (M0)
High Availability
- High Availability v.5.0.0 Show release notesHide release notes
- Improvement: removed safetynet dependency (M21072)
- Bugfix: When switching to MASTER state, processes sometimes failed to start (M21072)
- Improvement: keepalived script was not compatible with keepalived role (M21072)
- Bugfix: astdb replication was not working (M21508)
Certificate Generator
Polycom Phone Support
Polycom Phone Support v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to disable LLDP (M21839)
- Deprecated: PUM login and logout were failing (M22254)
New resource versions
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.13.1 - Early deployment
Release notes
- Bugfix: Skip SSH Peer Connectivity installation (M22693)
- Bugfix: ETL evaluation in HA module was failing (M22693)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.27.0 Show release notesHide release notes
- Feature: Escaux presence format v2 (M21131) - link
- Feature: Make available more queue results in variables (M20710) - link
- Feature: Dual use of pidf and epresence JSON on the same extension (M21131) - link
- Bugfix: Abnormal circuit reset in case of in/out ISUP message collision (M21737) - link
- Bugfix: Deadlock on SS7 ACM reception (M22046) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Voxtron and net.Buzz extended presence support removed (M21131) - link
SOP API
SOP API v.5.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Syntax error (M21819) - link
- Bugfix: Avoid crash when status role mapping is not defined (M21819) - link
SOP API v.5.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix applying queue policy on secondary phone
SOP API v.5.5.0 (intermediate version) Show release notesHide release notes
- Feature: Add support to personal queue policy (M21473) - link
SOP API v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Support dbGetQueuePolicyToggle and ccQueuePolicyToggle (M20424) - link
SOP API v.5.3.2 (intermediate version) Show release notesHide release notes
- Improvement: Forward user agent during the cluster sync (M20616) - link
- Bugfix: Remove syntax error (M20353) - link
SOP API v.5.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Issue to get status permission (M20896) - link
SOP API v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: Support roles for status (M20012) - link
- Feature: Support permission with constraints on status (M20297) - link
- Improvement: Log errors when parsing contacts.csv (M20306) - link
SOP API v.5.2.0 (intermediate version) Show release notesHide release notes
- Feature: Provide a default value for the callback number (M0)
Unified End Point Support
Unified End Point Support v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Support SVE phones (M0)
Unified End Point Support v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Support phone on UEP (M20403)
Unified End Point Support v.2.1.1 (intermediate version) Show release notesHide release notes
- Feature: Provides a proxy to the UEP (M17285)
- Bugfix: Add missing parameter (M0)
Unified End Point Support v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Provides a proxy to the UEP (M17285)
- Deprecated: Missing parameter
Unified End Point Support v.2.0.3 (intermediate version) Show release notesHide release notes
- Deprecated: Not released (M0)
Unified End Point Support v.2.0.2 (intermediate version) Show release notesHide release notes
- Bugfix: Add defenses to avoid involuntary slot reset (M0)
New resource versions
New action versions
Included components
Modules
Resources
Actions
Version 4.12.2 - Early deployment
Release notes
- Bugfix: Installation was failing on newly installed SOP (M22185)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.12.1 - Early deployment
Release notes
- Bugfix: net.Console failed to start (M21815)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Application Management Server
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.12.0 - Deprecated
Release notes
- Feature: Added Office and Site in net.Console's directory (M21790)
- Feature: Add IMRI Number parameter in SOP profile (M21695)
- Feature: Update display name in case of forward (M0)
- Bugfix: Gigaset template resource were not master resources (M0)
- Bugfix: Incorrect default value for ringtones causing ring delay on Polycom phones (M21938)
- Bugfix: FMU light was detected as an FMU call (M21760)
- Bugfix: set "Mail Server" mode as "Secure" by default (M21865)
- Bugfix: Incorrect message played when Voicemail Extension is configured (M21828)
- Bugfix: Phone status sometimes not updated in net.Console (M21758)
- Bugfix: Certificate install issue (M21664) (M21665)
- Bugfix: Status cannot be displayed in the directory overview (M0)
- Bugfix: CFU must be disabled if no forward number is configured (M20880)
- Bugfix: Prevent forward loop when forwarding to fmu mobile (M22003)
- Bugfix: IVR voicemail - Incorrect prompt (M21782)
- Bugfix: Custom ring tones for queues (M21897)
- Deprecated: net.Console failed to start (M21815)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart mserver |
| Upgrade net.Console application |
Changed components
Show changed componentsHide changed components
New module versions
- Mail Server
- Mail Server v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Disk space issue caused by local mailboxes (M14683)
- Bugfix: Force secure mode as default (M14683)
Mail Server v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12753)
Certificate Generator
- Certificate Generator v.1.0.1 Show release notesHide release notes
- Bugfix: Remove useless key conversion (M15528) - link
- Bugfix: Fix CRL generation when installing the module on 2 SOP's at the exact same time (M21665) - link
- Bugfix: Don't emit non-fatal errors (M21664) - link
Application Management Server
Unified Communication Model
Unified Communication Model v.1.13.3 (intermediate version) Show release notesHide release notes
- Bugfix: Phone status incorrect because incorrect startup dependency (M21758)
Database Schema
Database Schema v.3.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Leave dbmonitor if a delete request fails when archiving (PC-541)
Database Schema v.3.5.0 (intermediate version) Show release notesHide release notes
- Feature: Add call id to call quality table (M21261)
Database Schema v.3.4.0 (intermediate version) Show release notesHide release notes
- Feature: Add call quality table (M20549)
Database Schema v.3.3.0 (intermediate version) Show release notesHide release notes
- Feature: Support roles for status (M19523)
net.Console
- net.Console v.3.10.0 Show release notesHide release notes
- Bugfix: Fixed JxBrowser error with url containing white spaces (M0)
- Feature: Added fields site/office to directory entry (M21790)
net.Console v.3.9.3 (intermediate version) Show release notesHide release notes
- Bugfix: Added support of foreign protocols in JxBrowser (M20916)
- Improvement: Updated JxBrowser to version 6.18 (M0)
New resource versions
Unified End Point SIP peer v.1.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: Really allow no authentication (M0)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.11.1 - Early deployment
Release notes
- Bugfix: Default country was not taken into account to reformat number (M0)
- Bugfix: Call from UnifiedEndPoint was always considered as an FMU call (M21760)
- Bugfix: It was not possible to use teh server default codecs on the Gigaset phones (M21729)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
- Polycom Phone Support
- Polycom Phone Support v.5.10.0 Show release notesHide release notes
- Feature: Auto-reload of the configuration in case of configuration changes (M17423)
- Bugfix: Configuration reload when using SIPTLS was not working (M17423)
- Deprecated: PUM login and logout were failing (M22254)
- Polycom Phone Support v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade firmware for SPIP 670, 650 and 335 on Internet (M20669)
FAX Server
Communication Server
- Communication Server v.3.26.0 Show release notesHide release notes
- Improvement: Callflow after apply changes reload can now run for a longer time (M21408) - link
- Improvement: Added included directory for sip notify configuration (M17423) - link
- Improvement: Disable the defence during dialplan reload (M21518) - link
- Bugfix: Deadlock on SS7 call (M21370) - link
Communication Server v.3.25.0 (intermediate version) Show release notesHide release notes
- Feature: Added function MEMBER_QUEUE_LIST (M19859) - link
- Improvement: New commands to debug and monitor SIP subscriptions (M21115) - link
- Improvement: More hint and presencestate details shown (M21115) - link
- Improvement: Deactivate getpresence callflow during dialplan reload (M20411) - link
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Notify body could contain trailing line feed characters (M21114) - link
- Bugfix: Correctly forward return code from threadpool/taskprocessor (M21115) - link
- Bugfix: Do not outdate presencestate cache on first and last watcher (M21115) - link
- Bugfix: Avoid crash during the Escaux CDR driver load (M21124) - link
Communication Server v.3.24.0 (intermediate version) Show release notesHide release notes
- Feature: Added QUEUE_RAISE_PENALTY feature (M21060) - link
- Feature: Rules for ringall is now taken into account without expiry of the queue timeout (M21060) - link
- Bugfix: When parallel_retry was configured, higher penalty were also ringing (M21060) - link
New resource versions
- ReportQDR
- ReportQDR v.2.0.0 Show release notesHide release notes
- Improvement: Don't send report when empty (M19774)
- Improvement: Added SLA condition (M19498)
- Improvement: Added destination number for transferred call (M19947)
- Improvement: Added NOMEMBER result in summary/combined report (M20581)
- Improvement: Added first name + last name behind the destination number (M20643)
- Improvement: Implemented grand totals (M20705)
- ReportQDR v.1.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Would not generate 'Combined and Summary reports' if 'Summarized by...' has no value selected. (M11401)
- Bugfix: Character encoding issue for html output report (M12622)
- Bugfix: Column "Agent device owner" was missing in Combined and Summary reports (M17006)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB
- SyncCDRDB v.3.0.0 Show release notesHide release notes
- Feature: Synchronize queue log events (M19497)
- Improvement: Removed dependencies on attribute log and net.Supervisor (M20219)
- Improvement: Added first name + last name behind the destination number (M20643)
SyncCDRDB v.2.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: incorrect soprep was used to detect callflows (M25309)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: CDR of calls to extension looking like a callflows id were dropped (Backport) (M23230)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Cisco SPA8000
Cisco SPA112
QueueRule
PolycomIP6000
PolycomIP6000 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomIP650
PolycomIP650 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomIP331
PolycomIP331 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomIP7000
PolycomIP7000 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX500
PolycomVVX500 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX1500
PolycomVVX1500 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX310
PolycomVVX310 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX400
PolycomVVX400 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX300
PolycomVVX300 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX410
PolycomVVX410 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX600
PolycomVVX600 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX101
PolycomVVX101 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX201
PolycomVVX201 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX401
PolycomVVX401 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX411
PolycomVVX411 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX311
PolycomVVX311 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX601
PolycomVVX601 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX501
PolycomVVX501 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
PolycomVVX301
PolycomVVX301 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669)
Queue
GigasetN720IP
GigasetN510IP
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.11.0 - Early deployment
Release notes
- Feature: custom voicemail extension for CallQueuer (M20651)
- Feature: Latest versions of SyncCDRDB & ReportQDR (M21562)
- Feature: Added shortcodes for conflicting numbers (M21593)
- Feature: Room 8 added into Template-Conference (M21597)
- Feature: Fax server was not started (M21073)
- Improvement: customizable ringing time (M21379)
- Improvement: Removed unused entries in sop profile (M19846)
- Improvement: Allows to start hook when user answer call (M21396)
- Improvement: More infos shown in the FleetManager (M20887)
- Improvement: srtp for Polycom on Internet (M21197)
- Improvement: 99 speeddials filled in with LUA (M19674)
- Improvement: Disabled mwi and qualify on SDX6 (M0)
- Bugfix: Polycom on Internet reload + auto-reload (M17423)
- Bugfix: Incorrect config in case of pum login (M20283)
- Bugfix: Dynamic number shown in voicemail to email (M14849)
- Bugfix: Added D.PickUp SoftKey for every VVX phone (M21366)
- Bugfix: Incorrect DSCP values in Cisco ATA (M21105)
- Bugfix: Queue & IVR default prompts if not recorded (M21390)
- Bugfix: Fixed queue rule issue (M21060)
- Bugfix: Calling the mobile number of a colleague in private mode was not possible (M21364)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.10.0 - Early deployment
Release notes
- Feature: Support worldwide dialplan (M19846)
- Feature: Allow to bind SIP TLS on eth1 (M20536)
- Bugfix: Removed dialplan parsing warning in logs (M20686)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.3.23.0 Show release notesHide release notes
- Feature: Configurable bind addresses for SIP (M20536) - link
- Feature: Control of the sending of the 181 SIP message (M19306) - link
- Bugfix: Segfault when using NUM_INFO without all required arguments (M19846) - link
- Bugfix: JsonAdd/Set behavior on existing objects (M17879) - link
- Communication Server v.3.22.5 (intermediate version) Show release notesHide release notes
- Feature: New channels and uptime SOP CLI commands (backport) (M24628) (M25422) - link
Communication Server v.3.22.4 (intermediate version) Show release notesHide release notes
- Bugfix: Possible deadlock during REFER (backport) (M23467) - link
Communication Server v.3.22.3 (intermediate version) Show release notesHide release notes
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (backport) (M2925) - link
Communication Server v.3.22.2 (intermediate version) Show release notesHide release notes
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Fix crash on MWI subscription start or stop after DNS update (backport) (M22408) - link
- Bugfix: JsonAdd/Set behavior on existing objects (M17879) - link
Communication Server v.3.22.0 (intermediate version) Show release notesHide release notes
- Feature: Add library to format numbers (M15207) - link
- Feature: Synchronous REFER support (M16351) - link
- Bugfix: Fixed destination number on TRANSFER event in queue log (M19497) - link
Communication Server v.3.21.1 (intermediate version) Show release notesHide release notes
- Bugfix: res_json was leaking 2 bytes of return code (M17755) - link
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.9.0 - Early deployment
Release notes
- Feature: Added support for different ringtones between internal and external calls (M15829)
- Feature: Added support for Gigaset N510 and N720 base stations (M20657)
- Bugfix: Auto-negotiation of DTMF mode in SIP Trunk (M20598)
- Bugfix: Forward to external number fails when in private mode (M18777)
- Bugfix: Increased ATA first digit timeout (M20272)
- Bugfix: Quote were not accepted in LDAP search query (M18463)
- Bugfix: Duplicate CDRs in ReportCDR (M19908)
- Bugfix: Not able to listen to voicemail from inside net.Console (M19038)
- Bugfix: Not able to archive/delete voicemail in net.Console (M12858)
- Improvement: Allow calling emergency numbers with or without leading 0 (M19960)
- Improvement: Lowered SafetyNet dependency (M19667)
- Improvement: Load issue and symlink sync issue (M19656)
- Improvement: Fixed AllowForwardFromAgent (M19198)
- Improvement: Added support for Polycom IP6000 (M16844)
- Dependency:
- SMP Application v5.10.10 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
| Restart Application Management Server |
Changed components
Show changed componentsHide changed components
New module versions
- NTP server
- NTP server v.2.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Add firewall rule for NTP (M0)
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
NTP server v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Bugfix: There was a false error when installing on a vSOP (M12942) - link
Application Management Server
Application Management Server v.3.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone status was always busy (M21758)
- Deprecated: Attribute bundle does not start properly (M21758)
Web Server
Web Server v.2.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure that the installation does not remove critical packages. (M0)
Web Server v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix contents of mpm.conf (M0)
Web Server v.2.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Monitor Nginx (M16948) - link
Web Server v.2.1.0 (intermediate version) Show release notesHide release notes
- Bugfix: Support for newer apache packages from upstream (M0)
- Feature: Limit number of websocket connection (M15728) - link
- Feature: Added the ability to configure the session lifetime (M15748) - link
Web Server v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: The web server configuration was broken when upgrading from a previous version (M14455) - link
Web Server v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Feature: Added parameter to set max number of clients (M13809) - link
- Improvement: Added web server related packages from Sop Base module (M12772) - link
- Deprecated: Breaks Web server configuration when upgrading from a previous version. (M14455) - link
Web Server v.1.6.2 (intermediate version) Show release notesHide release notes
- Bugfix: Upgrading apache on baseline 2 to fix CVE-2011-319 which could crash it (M17647) - link
Web Server v.1.6.1 (intermediate version) Show release notesHide release notes
- Improvement: RC4 and EXPORT Ciphers suite support disabled (M13063) - link
- Bugfix: An error was reported during installation when no actual error occurred (M12150) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Now you can chose between nginx or apache for the websockets (M11729) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.3 (intermediate version) Show release notesHide release notes
- Bugfix: No longer display non pertinent error on install (M0)
- Bugfix: Weak Ciphers disabled on the whole server (M0)
- Improvement: Defense to prevent the wrong configuration of the IP address (M12239) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: SSL weak ciphers disabled (M0)
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: HTTP, OpenSSL and PHP version type detection disabled. (M11658) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.0 (intermediate version) Show release notesHide release notes
- Bugfix: Increased connection limit (M11175) - link
- Bugfix: Poodle vulnerability fixed by disabling SSLv3 (M11215) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: The required certificate serial could sometimes be detected incorrectly (M10650)
- Feature: Enabling failover/loadbalancing capability
- Feature: Added the ability to authenticate users using SMP API via HTTP Basic Authentication (M10089)
- Improvement: Reload Apache after apply changes
- Feature: Make the timeout configurable (M10670)
- Feature: Added option to disable default site (M10940)
- Feature: HTTP Basic Authentication caching
- Deprecated: Vulnerable to CVE-2011-319 (M17647)
Web Server v.1.3.0 (intermediate version) Show release notesHide release notes
- Feature: Provide Websocket proxy
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.2.6 (intermediate version) Show release notesHide release notes
- Bugfix: Fix compatibility issue with SOP Base module (M23979) - link
SNMP Agent
SNMP Agent v.4.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: Update debian version for baseline 3 and checks (M0)
SNMP Agent v.4.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove asterisk manager trace file (M17507) - link
- Bugfix: Incorrect version of packages for HP hardware monitoring selected
SNMP Agent v.4.1.0 (intermediate version) Show release notesHide release notes
- Feature: Include finished calls passed during the last polling period in computation (M11435) - link
- Feature: Support of Dahdi Trunk (M9308) - link
- Feature: Support NodeJS api monitoring (M16185) - link
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: Rating oriented probe to check connectivity (M13333) - link
- Improvement: Rating oriented probe for monitoring daily rating (M13332) - link
- Improvement: Support internal error in dialogic dsi probe (M13812) - link
- Improvement: Improve dahdi probe for lua expression (M15598) - link
- Improvement: Improve sip probe for lua expression (M13970) - link
- Improvement: Generate Probe ID to support inheritance (M16035) - link
- Bugfix: Fix false positive errors when installed on vsop (M12943) - link
- Bugfix: Fixed error with dmidecode command on vsops (M0)
- Bugfix: Support DL360 G9 and DL20 on baseline 3 (M15310) - link
- Bugfix: Upgrade SNMP subsystem for HP hardware probes support (M15763) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
SNMP Agent v.4.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Feature: Add SNMP agents for monitoring HP hardware (M12556) - link
- Feature: Added probe to monitor SOP cluster syncronization (M112522) - link
- Improvement: SMPP queue monitoring (M11421) - link
- Bugfix: Stopping snmpd on the vSOP host was causing the stop of snmpd on all vSOPs (M9792) - link
SNMP Agent v.3.13.1 (intermediate version) Show release notesHide release notes
- Bugfix: Monitor SMSC connection (M18019) - link
SNMP Agent v.3.13.0 (intermediate version) Show release notesHide release notes
- Feature: Support NodeJS api monitoring (M16185) - link
- Improvement: Generate Probe ID to support inheritance (M16035) - link
- Bugfix: Support multiple range of channels in dahdi monitoring (M17043) - link
- Bugfix: HP DL20 Gen9 machine crashed when module was installed on baseline 2. Remove support for HP Gen9 hardware monitoring on baseline 2 (M17258) - link
- Bugfix: Remove asterisk manager trace file (M17507) - link
SNMP Agent v.3.12.5 (intermediate version) Show release notesHide release notes
- Bugfix: Upgrade package version (M0)
SNMP Agent v.3.12.4 (intermediate version) Show release notesHide release notes
- Bugfix: Remove asterisk manager trace file (M17507)
- Deprecated: Wrong package installed (M0)
Cluster & SOP Active-Active Support
Cluster & SOP Active-Active Support v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Filemanager could not access some of the prompts (M18867) - link
Database Server
Database Server v.4.2.0 (intermediate version) Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
Database Server v.4.1.1 (intermediate version) Show release notesHide release notes
- Deprecated: Debugging version.
Database Server v.4.1.0 (intermediate version) Show release notesHide release notes
- Bugfix: ODBC only allowed a single query at the time. (M14911) - link
Database Server v.4.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Bugfix: Grants to write instant messages into the database were not written until tables were present (M0013589) - link
Database Server v.3.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Enable FLAG_AUTO_RECONNECT option for LDAP dsn (M0004038)
- Deprecated: Not intended for production (M0)
Watchdog
Watchdog v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: Code refactoring (M16555) - link
- Improvement: Converted to APT (M16555) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
Watchdog v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Bugfix: default values could be incorrect when upgrading from a previous version and new options are available.(M10261) - link
System Base
Polycom Phone Support
Database Schema
Database Schema v.3.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Installation failed when db replication was activated (M19856)
Database Schema v.3.2.0 (intermediate version) Show release notesHide release notes
- Feature: Possibility to optimize the tables (M10409)
- Feature: Possibility to cleanup archived files (M10409)
- Improvement: Add index on scr column in the cdr table (M10292)
- Bugfix: SOP-SMP DB synchronization could fail (M16953)
- Improvement: Ensure that sop and cdrdb tables are created with latin1 encoding (M18407)
- Bugfix: Do not attempt to upgrade the database when it is not writable (M0018408)
Database Schema v.3.1.1 (intermediate version) Show release notesHide release notes
- Improvement: Add custom CDR fields (usertag and usernote) (M13662)
Database Schema v.3.1.0 (intermediate version) Show release notesHide release notes
- Improvement: added columns needed for the rating of premium (M13999) - link
- Bugfix: Decrease apply changes duration (M14120) - link
Database Schema v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Feature: Add some rating column in cdrdb.cdr (M12882)(M13353)(M13319) - link
- Improvement: Better cache serialization of data (M13856) - link
Database Schema v.2.10.3 (intermediate version) Show release notesHide release notes
- Improvement: Added index on CDR's uniqueid (backport) (M19908)
Call Management
- Call Management v.1.8.6 Show release notesHide release notes
- Bugfix: Listen to voicemail from inside net.Console was not working (M19038)
- Bugfix: Incorrect transfer destination was published in queue_log (M19497)
VMXML
net.Console
LDAP Server
LDAP Server v.1.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Remove dependency on safetynet (M19656)
LDAP Server v.1.7.4 (intermediate version) Show release notesHide release notes
- Bugfix: Quote were not accepted in search query (Backport) (M18463)
LDAP Server v.1.7.3 (intermediate version) Show release notesHide release notes
- Bugfix: The module installation was raising raising false errors. (M14173)
Gigaset Phone Support
- Gigaset Phone Support v.1.2.0 Show release notesHide release notes
- Bugfix: False positive message (M0)
- Feature: Reboot support for Gigaset N510 IP PRO and Gigaset N720 DM PRO (M20496)
- Improvement: Activated LDAP directory (M20373)
- Improvement: Activated mailbox (M20374)
- Improvement: Suppressed Voip wizard (M20376)
New resource versions
- PolycomIP6000
- PolycomIP6000 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
GigasetN720IP
GigasetN720SAT
SyncCDRDB
- SyncCDRDB v.2.5.0 Show release notesHide release notes
- Bugfix: Some call could have two CDRs (M19908)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Cisco SPA112
Cisco SPA112 v.1.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support Calls over Internet (M16268)
Cisco SPA112 v.1.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Set Three Way Call Serv to no by default (M15031)
- Bugfix: Lua expresiiion were not allowed in the dialplan (M15606)
Cisco SPA8000
SIP Trunk
SIP Trunk v.2.5.0 (intermediate version) Show release notesHide release notes
- Feature: Activation of the SIP TLS
GigasetN510IP
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.8.1 - Early deployment
Release notes
- Bugfix: Fix dependency issues on apache packages (M20311)
- Bugfix: Add default UEP feature set in sop.config (M20248)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- SOP Base
- SOP Base v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365)
- Improvement: Moved all web related packages in Web Server module. (M12772)
- Improvement: Added escaux-evaluate package from System Base module (M0)
- Bugfix: Add missing dependencies (M14560)
SOP Base v.1.9.2 (intermediate version) Show release notesHide release notes
- Bugfix: Compatibility issue with Web Server module (M0)
SOP Base v.1.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: Added missing dependencies (M14560)
SOP Base v.1.9.0 (intermediate version) Show release notesHide release notes
- Improvement: Daemonized updatephone.php & push_phone.pl (M9887)
- Deprecated: Missing dependencies (M14560)
SOP Base v.1.8.5 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed dependency issue when using baseline 2.6 (M23979)
- Bugfix: There was compatibility issue with the WebServer module (M23979)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.8.0 - Early deployment
Release notes
- Feature: Added support for Polycom VVX501 and VVX601 (M16527)
- Feature: Activate Polycom HTTP provisioning (M18513)
- Feature: Added support for HTTP provisioning in zeroconf task (M19078)
- Feature: Polycom Firmware upgrade scheduling (M18513)
- Feature: Added SipTrunk profile (M18261)
- Feature: Added support for SDX6 feature set in User profile (M18695)
- Improvement: Ensure unique mac address for SDX6 resources (M19673)
- Improvement: Use pincode from User profile for PUM login (M19274)
- Improvement: Caller ID added in fax2email subject (M16958)
- Improvement: Added prefix to Caller ID in IVR (M18311)
- Improvement: Preserve Called ID in OutgoingCallCatcher (M18886)
- Improvement: Added "allowForward" option in template CallQueuer (M19198)
- Improvement: Missing internet phone config added to template resources (M19394)
- Improvement: Added mobile number in FleetManager (M19221)
- Improvement: SIP keepalive for Polycom phones (M19716)
- Bugfix: Forward was not working for IVR-Absent (M17168)
- Bugfix: Fixed FMU call check in callflow (M19004)
- Bugfix: Call pickup blocking net.Console transfer (M19339)
- Bugfix: Invalid phone status in net.Console (M18823)
- Bugfix: Outbound sip trunk registration never sent on Fusion (M19154)
- Bugfix: Broken PUM login/logout (M19273)
- Bugfix: IP address of phones not displayed correctly in dbGetDirectoryInfo (M18937)
- Bugfix: Forward to external number fails when in private mode the PBX (M18777)
- Bugfix: Net.Console blocked if BlindTransfer & NoRinging/Answer received (M4078)
- Bugfix: Queue parameters not inherited from master (M0)
- Bugfix: Fixed phone IPs in dbGetDirectoryInfo (M0)
- Bugfix: Disposition was not always correct (M18722)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
| Restart Application Management Server |
Changed components
Show changed componentsHide changed components
New module versions
- Web Server
- Web Server v.1.2.4 (intermediate version) Show release notesHide release notes
- Bugfix: the required certificate serial could sometimes be detected incorrectly (M10650) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Polycom Phone Support
- Polycom Phone Support v.5.8.0 Show release notesHide release notes
- Feature: Added ability to limit simultaneous downloads (M18512)
- Feature: Added support of zeroconf when HTTP provisioning is used (M19078)
Polycom Phone Support v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: Support Polycom VVX501 and VVX601 (M16527)
- Feature: Added the ability to define firmware upgrade schedule (M18512)
Polycom Phone Support v.5.6.1 (intermediate version) Show release notesHide release notes
- Bugfix: Status page was not accessible when the HTTP provisioning was activated (M17415) - link
- Bugfix: Speedials not updated on configuration reload (M18373) - link
System Base
- System Base v.2.4.0 Show release notesHide release notes
- Bugfix: SSH connection - Be more tolerant against network failures (M18135) - link
- Bugfix: SSH connection - Try authentication with ECDSA and DSA key
- Bugfix: Cluster synchronization broke prompt symlinks (M18867) - link
- Improvement: Remove unused daemon process that caused memory issues (M19120) - link
- Feature: Added local tasks support (M18513) - link
System Base v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove unused packages causing network to restart slowly
- Deprecated: Unused daemon process was causing high memory usage (M19120) - link
DHCP Server
DHCP Server v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Topic Senior IP phone provisioning was not always working (M18199) - link
FAX Server
Call Management
Call Management v.1.8.4 (intermediate version) Show release notesHide release notes
- Bugfix: Outgoing calls towards an invalid number would create hanging calls (M18823)
SOP API
SOP API v.5.0.3 (intermediate version) Show release notesHide release notes
- Bugfix: Fix phone IP indication when in cluster (M0018937) - link
- Bugfix: Missing remote_chanel in attribute log when call coming from a queue (M17934) - link
- Bugfix: Update dependencies (M0)
Communication Server
- Communication Server v.3.21.0 Show release notesHide release notes
- Improvement: Allow "force mode" on Escaux CDR driver (M18714) - link
- Improvement: Remove defence daemon dependency on safetynet (M19502) - link
- Bugfix: Sometimes fails to start automatically on a new install (M19534) - link
- Bugfix: Outbound registrations were deactivated by default (M19154) - link
- Bugfix: AutoMute could prevent channel deletion (M19621) - link
- Bugfix: Correct version of libss7 (M19615) - link
Communication Server v.3.20.0 (intermediate version) Show release notesHide release notes
- Feature: Allow other packages to include dialplan configuration (M18096) - link
- Bugfix: Permissions on spool directory needed a second install to be correct (M19267) - link
- Bugfix: Incorrect digest response in the Proxy-Authentication header of the REFER message (M19412) - link
Communication Server v.3.19.2 (intermediate version) Show release notesHide release notes
- Bugfix: Permissions on spool directory needed a second install to be correct (backport) (M19267) - link
Communication Server v.3.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Removed leftover ~dev in package version
Communication Server v.3.19.0 (intermediate version) Show release notesHide release notes
- Feature: SS7 - Open media on ACM (M18205) - link
- Feature: SS7 - Make Called Party Status Indicator configurable (M18205) - link
- Feature: Add Escaux CDR driver (M18701) - link
- Improvement: Debconf system more reliable (M17929) - link
- Improvement: In ringall strategy ring members as soon as they are available (M18271) - link
- Improvement: Make voicemail-cleanup configurable (M18090) - link
- Improvement: Support custom HTTP methods in func_curl (M18044) - link
- Bugfix: Expires of a Subscribe response was ignored (M18825) - link
- Deprecated: Not installable because of leftover ~dev
Communication Server v.3.18.4 (intermediate version) Show release notesHide release notes
- Bugfix: res_json was leaking 2 bytes of return code (backport) (M17755) - link
Communication Server v.3.18.3 (intermediate version) Show release notesHide release notes
- Bugfix: Expires of a Subscribe response was ignored (M18825) - link
net.Console
PUM
New resource versions
- SyncCDRDB
- SyncCDRDB v.2.4.3 Show release notesHide release notes
- Bugfix: Disposition was not always correct (M18722)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
- SyncCDRDB v.2.4.2 (intermediate version) Show release notesHide release notes
- Bugfix: Filter escauccapi calls out of reports
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove comment from sync code(M0)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: Caller number change was not taken into account (M13837)
- Feature: Add custom CDR fields "usertag" and "usernote" (M13662)
- Deprecated: Broken sync code (M0)
PolycomUpgrade
PolycomIP331
- PolycomIP331 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomIP331 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP650
- PolycomIP650 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomIP650 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP7000
- PolycomIP7000 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomIP7000 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX101
- PolycomVVX101 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX101 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX1500
- PolycomVVX1500 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX1500 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX201
- PolycomVVX201 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX201 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX300
- PolycomVVX300 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX300 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX301
- PolycomVVX301 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX301 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX310
- PolycomVVX310 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX310 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX311
- PolycomVVX311 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX311 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX400
- PolycomVVX400 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX400 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX401
- PolycomVVX401 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX401 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX410
- PolycomVVX410 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX410 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX411
- PolycomVVX411 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX411 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX500
- PolycomVVX500 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX500 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX501
- PolycomVVX501 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX600
- PolycomVVX600 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PolycomVVX600 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX601
- PolycomVVX601 v.5.8.1 Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001)
- Improvement: Support IP6000 over Internet (M16844)
- Improvement: Allow to configure SIP Session timer (M19716)
PhoneZeroConf
PhoneZeroConf v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Support Polycom VVX501 and VVX601 (M16527)
New action versions
- STARTDYNAMICAPPLICATION.8.4.2
Included components
Modules
Resources
Actions
Version 4.7.1 - Early deployment
Release notes
- Bugfix: X.900 should not be allowed (M18232)
- Bugfix: Voicmeail were deleted by the apply-change (M18090)
- Bugfix: Status change from VVX were not working (M17415)
- Bugfix: The Directory softkey should not be visible on a Polycom phone (M18395)
- Bugfix: Password for shell access were not set (M17628)
- Bugfix: Profile parameters were not synced properly (M18546)
- Bugfix: Profile licenses were not correct (M18232)
- Bugfix: Changing admin password with recovery user was no longer working (M16945)
- Bugfix: Some profile parameter for the profile BasicDevice were missing (M18336)
- Bugfix: Reboot was needed to change the speeddials on Polycom (M17786)
- Bugfix: Status was not visible in the fleet manager (M16701)
- Bugfix: Music on Hold were not reloaded after an apply change (M18461)
- Bugfix: Click2Dial from Connect Me on a Active-Standby Fusion was not working (M16978)
- Bugfix: PUM could fail in a cluster (M16121)
- Bugfix: The presence callflow was triggered too often (M17545)
- Bugfix: Wav files were not attached email notifying new voicemail (M16786)
- Bugfix: Removed first and last name for DDI in the fleet manager view (M16701)
- Bugfix: UEP MAC from user's profile (M18433)
- Bugfix: Doc for queue rules was missing (M16973)
- Bugfix: Voicemail introduction prompts were missing in some languages (M18299)
- Bugfix: In case of blind transfer from net.Console call were not leaving the supervision area when in Voicemail (M17236)
- Bugfix: The embedded browser of net.Console was too old (M12764)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
| Restart Application Management Server |
Changed components
Show changed componentsHide changed components
New module versions
- Cluster & SOP Active-Active Support
- Cluster & SOP Active-Active Support v.2.0.0 Show release notesHide release notes
- Improvement: Packaging refactoring (M16552) - link
- Improvement: Converting to APT (M16552) - link
- Bugfix: Synchronization issue when an extension is removed (M16713) - link
- Cluster & SOP Active-Active Support v.1.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: Filemanager could not access some of the prompts (M18867) - link
Cluster & SOP Active-Active Support v.1.10.0 (intermediate version) Show release notesHide release notes
- Feature: Support of unlimited parameter size for speeddials (M14143) - link
- Feature: Added firewall rules (M13989) - link
- Bugfix: Synchronization issue when an extension is removed (M16713) - link
- Bugfix: Fixed profile synchronization issue (M14595) - link
Cluster & SOP Active-Active Support v.1.9.0 (intermediate version) Show release notesHide release notes
- Feature: Added error handling for the Cluster Synchronization probe (M11252) - link
- Improvement: Profile synchronization script could fetch too many extensions (M11252) - link
- Improvement: Launch status update callflow configured in SOP API (M13509) - link
- Bugfix: Profile synchronization was no more working with the new profile parameter set (M14102) - link
SOP API
- SOP API v.5.0.2 Show release notesHide release notes
- Bugfix: Display local IP for standalone sops or extensions with multiple sop even when cluster.ini is present (M16978) - link
- Bugfix: Display error when parsing invalid CSV file (M0)
- Bugfix: Compatibility with escaux user (M16876) - link
SOP API v.5.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix installation when older api version is installed on the machine (M0)
- Bugfix: Compatibility with escaux user (M16876) - link
SOP API v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to trigger a callflow when a parameter is changed (M14034) - link
- Feature: Add User Agent in dbSetProfile callback (M15755) - link
- Improvement: Re-introduce wildcards option (M15755) - link
- Improvement: Modular design and APT support (M0)
- Bugfix: No BillSec after ccOriginate on Local channels (M15952) - link
- Bugfix: No CalledNumber after ccOriginate on Local channels (M16422) - link
- Bugfix: Compatibility with escaux user (M16876) - link
SOP API v.4.19.0 (intermediate version) Show release notesHide release notes
- Feature: Allowing AdminVAR modification when request comes from local IP (M17391) - link
SOP API v.4.18.0 (intermediate version) Show release notesHide release notes
- Feature: Add User Agent in dbSetProfile callback (M15755) - link
- Improvement: Re-introduce wildcards option (M15755) - link
- Bugfix: No BillSec after ccOriginate on Local channels (M15952) - link
- Bugfix: No CalledNumber after ccOriginate on Local channels (M16422) - link
- Deprecated: Not compatible with escaux user (M16876) - link
PUM
net.Console
- net.Console v.3.9.0 Show release notesHide release notes
- Feature: Updated embedded browser with Chromium 55 (M12764)
- Feature: Updated Java runtime environement to Java 1.8.0_121 (M17541)
- Bugfix: Fixed call blind transferred to a voicemail not leaving the supervision area (M17236)
Shell
- Shell v.2.1.1 Show release notesHide release notes
- Bugfix: Using recovery user to modify admin password was not working (M16945) - link
- Bugfix: The password hashes for users of the filemanager were never set properly (M17628) - link
Shell v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: The default interface for the admin user is now the Escaux CLI instead of the SOP shell (M16256) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade other modules too. The module documentation lists special upgrade actions for this version (M14774) - link
Shell v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
Shell v.1.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Using recovery user to modify admin password was not working - backport (M16945)
- Bugfix: The password hashes for users of the filemanager were never set properly - backport (M17628)
Sounds
Sounds v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix french "Calendar" prompt (M0)
Sounds v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Add additional Statuses (M17919)
Sounds v.2.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Conversion to Apt (M16553)
Sounds v.1.14.0 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect voicemail introduction prompts (backport) (M18299)
Sounds v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Allow empty SOP directory field (M15782)
Sounds v.1.12.0 (intermediate version) Show release notesHide release notes
- Bugfix: Missing prompts added for Unavailable and Busy greetings (M13713)
Sounds v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Add English 'Corporate Mode Is Unavailable' Prompt (M0013819)
- Feature: New voicemail prompts added for en/fr/nl (M0013713)
- Improvement: Don't raise an error when the prompt directory is not found in SMP (M15589)
Communication Server
Unified Communication Model
New resource versions
Queue v.3.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow analogue ZDA devices registered in the queue to be called. (M11037)
Polycom Virtual Phone
PolycomIP331
PolycomIP650
PolycomIP650 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP7000
PolycomVVX500
PolycomVVX1500
PolycomVVX310
PolycomVVX400
PolycomVVX300
PolycomVVX410
PolycomVVX600
PolycomVVX101
PolycomVVX201
PolycomVVX301
PolycomVVX401
PolycomVVX411
PolycomVVX311
New action versions
- STARTDYNAMICAPPLICATION.8.4.3
Included components
Modules
Resources
Actions
Version 4.7.0 - Early deployment
Release notes
- Feature: Support of Polycom IP7000 over internet (M15791)
- Feature: Support of Polycom VVX 4xx for net.Console (M16490)
- Feature: Render SDX6 resource compatible with automatic provisioning (M17972)
- Feature: Render SDX6 resource compatible with instant messaging for UEP (M17348)
- Feature: Peer-specific RTP port range (M16702)
- Feature: Added possibility to configure a hook for queue connected (M17231)
- Feature: Added queue rules (M16973)
- Improvement: Added national prefix to called numbers (M17612)
- Improvement: Make group pickup work again (M17494)
- Improvement: Corrected SVE resource default values (M16977)
- Improvement: Presence and incoming call for UEP trunk (M15507)
- Improvement: Better support of database restarts for WebRTC (M18125)
- Bugfix: Missing option in voicemail menu (M17602)
- Bugfix: MWI light stays on (M17895)
- Bugfix: RTP ports were not freed after connectivity loss while ringing (M17777)
- Bugfix: SOA password in internal directory (M17525)
- Bugfix: Country code 44 conflict with shortcodes (M18134)
- Bugfix: net.Console timeout when putting onhold (M18116)
- Bugfix: Disabled status change URL for VVX101 (M17939)
- Bugfix: Permissions on sudoers file are incorrect (M18245)
- Bugfix: Added 30min ring time in CallQueuer (M17938)
- Bugfix: Too short timetout for OutgoingCallCatcher (M17426)
- Bugfix: Allow disabling DHCP server (M17924)
- Bugfix: Unexpected auto-answer (M16620)
- Bugfix: Ensure the provisioning task is created (M0)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
Call Management
Communication Server
Communication Server v.3.18.0 (intermediate version) Show release notesHide release notes
- Feature: Launch callflow after apply changes (M17007) - link
- Feature: New commands in SOP CLI (M14976) - link
- Improvement: EndPointAbstraction do not register at creation (M17007) - link
- Improvement: Added Connected Line Update in Intrude application (M17901) - link
- Bugfix: Protect against potential crashes in res_json (M17879) - link
- Deprecated: Installation on clean machine fails (M17929) - link
Communication Server v.3.17.2 (intermediate version) Show release notesHide release notes
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (backport) (M2925) - link
Communication Server v.3.17.1 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure installation on clean machine works (M17929) - link
Communication Server v.3.17.0 (intermediate version) Show release notesHide release notes
- Feature: SIP peer-specific RTP port range (M16702) - link
- Improvement: Continuous log rotation (M12330) - link
- Improvement: Review mapping ISUP cause - SIP error (M17466) - link
- Improvement: Make virtual extensions and presence state timeout configurable (M17545) - link
- Bugfix: RTP ports were not freed after connectivity loss while ringing (M17516) - link
- Bugfix: REINVITE with codec rordering were not propagated (M17405) - link
- Bugfix: SIP message body starting with spaces could be lost (M15422) - link
- Bugfix: Restored automatic start on first installation (M12330) - link
- Deprecated: Installation on clean machine fails (M17929) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Start/Stop and process monitoring changed - see admin guide (M12330) - link
Communication Server v.3.16.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M16491) - link
- Improvement: Define multiple range of CICS (M17043) - link
- Improvement: Debconf template format support
- Improvement: Immediate restart after crash (M17031) - link
- Bugfix: Avoid safetynet false positive (M17031) - link
- Bugfix: Conf bridge announcements not played in the user's language (M16253) - link
- Bugfix: T38 was only working on eth0 (M16616) - link
- Bugfix: Process crashed in case of ccOriginate API call (M16768) - link
- Bugfix: Custom unavailable minivm greeting was never played (M16855) - link
- Bugfix: The recorded name was not used when the option skip fallback was used (M16855) - link
- Bugfix: Correctly authenticate outgoing instant messages (M17348) - link
- Bugfix: Crash when handling codec's payloads (M16969) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: SMP and template must have apt support (M16491) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Start/Stop and process monitoring changed - see admin guide (M17031) - link
- Deprecated: Better upgrade process in 3.17.0 (M17031) - link
Communication Server v.3.15.6001 (intermediate version) Show release notesHide release notes
- Bugfix: Voicemail were deleted after an apply-change (M18090) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.12 (intermediate version) Show release notesHide release notes
- Bugfix: Remove odbc idle check causing crashes (backport) (M17872) - link
- Deprecated: Never deployed in production
Communication Server v.3.15.11 (intermediate version) Show release notesHide release notes
- Bugfix: Deadlock on SS7 ACM reception (M22046) - link
- Limitation: Restricted to Tele2 FMU and Fuzer CDG (M0)
Communication Server v.3.15.10 (intermediate version) Show release notesHide release notes
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Deadlock when making ISUP call (M21370) - link
- Bugfix: Avoid SS7 CIC dual seizure (M21737) - link
- Limitation: Restricted to Tele2 FMU and Fuzer CDG (M0)
- Deprecated: Deadlock still possible (M22046) - link
Communication Server v.3.15.9 (intermediate version) Show release notesHide release notes
- Improvement: SS7 - Open media on ACM (backport) (M18205) - link
- Improvement: SS7 - Enable/disable the support of the Called party's status indicator (backport) (M18205) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.8 (intermediate version) Show release notesHide release notes
- Improvement: Added Connected Line Update in Intrude application (backport) (M17901) - link
- Deprecated: Higher version provide significant improvements (M0)
New resource versions
Unified End Point SIP peer
PolycomVVX500
- PolycomVVX500 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP331
- PolycomIP331 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP7000
- PolycomIP7000 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791) - link
- Feature: SIP peer-specific RTP port range (M16702) - link
- Bugfix: Push feature was not working on VVX410 (M16490) - link
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950) - link
PolycomVVX101
- PolycomVVX101 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX1500
- PolycomVVX1500 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX201
- PolycomVVX201 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX300
- PolycomVVX300 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX301
- PolycomVVX301 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX310
- PolycomVVX310 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX311
- PolycomVVX311 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX400
- PolycomVVX400 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX401
- PolycomVVX401 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX410
- PolycomVVX410 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX411
- PolycomVVX411 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX600
- PolycomVVX600 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.6.3 - Early deployment
Release notes
- Bugfix: On new installation it was not possible to record voicemail (M18056)
- Bugfix: Context changes after template upgrade (M17453)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.6.2 - Early deployment
Release notes
- Bugfix: RTP ports were not freed after connectivity loss while ringing (M17516)
- Bugfix: Upgrade version of net.Console to prevent installation errors (M17923)
- Bugfix: Allow disabling DHCP server (M17924)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
- net.Console
- net.Console v.3.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Corrected german translations. (M14612)
- Bugfix: Missing branding directory was raising error (M14173)
net.Console v.3.8.0 (intermediate version) Show release notesHide release notes
- Feature: Set extra informations on call (M13662)
- Improvement: Support for SHA-512 and bcrypt password hashing (M9470)
Communication Server
- Communication Server v.3.15.7 Show release notesHide release notes
- Bugfix: RTP ports were not freed after connectivity loss while ringing (backport) (M17516) - link
- Bugfix: Continuous log rotation was not working (backport) (M12330) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.6 (intermediate version) Show release notesHide release notes
- Improvement: Debconf template format support (backport)
- Improvement: Continuous log rotation (backport) (M12330) - link
- Improvement: Make virtual extensions and presence state timeout configurable (backport) (M17545) - link
- Improvement: Review mapping ISUP cause - SIP error (backport) (M17466) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.5 (intermediate version) Show release notesHide release notes
- Bugfix: Correctly authenticate outgoing instant messages (backport) (M17348) - link
- Deprecated: Higher version provide significant improvements (M0)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.6.1 - Early deployment
Release notes
- Bugfix: VVXs phones were abnormally slow (M16654)
- Bugfix: The status softkey for the Polycom on Internet was not linked to the status-change IVR (M16732)
- Bugfix: The Forward-when-absent as not working in the CallQueuer (M17168)
- Bugfix: Communication Server process could crash when call was answered (M16969)
- Bugfix: Communication Server could crash when reloading the configuration (M16670)
- Bugfix: Prevented Polycom phones to usedatetime offset provided by the DHCP server (M17165)
- Bugfix: Prevented time to be overwritten by notification on Polycom VVX (M16614)
- Bugfix: On some Polycom VVX phones it was not possible to re-initiate a call right after a call hangup (M16991)
- Bugfix: After the template upgrade to version 4.6.0, it was needed to edit and save the SOP configuration in the directory (M16952)
- Bugfix: Two apply-changes were needed after the upgrade to the version 4.6.0 (M16953)
- Bugfix: Ip address of secondary SOP was not provided to the Unified Endpoint (M16210)
- Bugfix: Some SOP shell menu were not working due to dependencies issues
- Bugfix: Upgraded Queue Action to fix dependency issue (M16888)
- Bugfix: Unified End Point provisioning could fail when lost of device were configured (M17155)
- Bugfix: Configuration could be lost after an apply-change in some rare condition (M16800)
- Dependency:
- SMP Application v5.10.3 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
| Restart of the Application Management Server |
| Reboot of all the Polycom VVX |
Changed components
Show changed componentsHide changed components
New module versions
- Database Server
- Database Server v.2.8.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774)
- Bugfix: ODBC only allowed a single query at the time. (M14911)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
- Database Server v.2.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: Grants to write instant messages into the database were not written until tables were present (M13589)
Database Server v.2.7.0 (intermediate version) Show release notesHide release notes
- Bugfix: Use correct encoding for IM (M12334)
Database Server v.2.6.0 (intermediate version) Show release notesHide release notes
- Feature: Added shell plugin to restore database backup (M0)
Unified Communication Model
- Unified Communication Model v.1.13.1 Show release notesHide release notes
- Bugfix: Phone status propagation in a cluster could fail (M0)
- Deprecated: Profile synchronization was not completely switched off (M18546)
Call Management
Call Management v.1.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed wrong CDR encoding (M13666)
DHCP Server
- DHCP Server v.2.5.0 Show release notesHide release notes
- Feature: added support for Gigaset phones DHCP option 114 (M12978) - link
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
NTP server
- NTP server v.1.9.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
Watchdog
- Watchdog v.1.5.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
SOP API
- SOP API v.4.17.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
Application Management Server
- Application Management Server v.3.5.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
FAX Server
- FAX Server v.2.6.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774)
- Bugfix: Compatibility with escaux user (M16876)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
FAX Server v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Caller ID was not always present in email's subject (Backport) (M16958)
System Base
- System Base v.2.3.0 Show release notesHide release notes
- Bugfix: Coredumps appeared on the VSOP host filesystem instead of the VSOP filesystem (M16350) - link
- Bugfix: Apply changes could remove configuration in some rare cases (M16800) - link
- Bugfix: Remove obsolete public key (M16229) - link
- Feature: Generate more complex passwords (M16373) - link
- Deprecated: Unused daemon process was causing high memory usage (M19120) - link
Database Schema
Database Schema v.2.10.1 (intermediate version) Show release notesHide release notes
- Improvement: Add index on scr column in the cdr table (Backport) (M10292)
Polycom Phone Support
- Polycom Phone Support v.5.5.1 Show release notesHide release notes
- Bugfix: VVX firmware upgrade to 5.5.1 fixing VVX 300,310,400 and 410 slowness after upgrade (M16654)
- Bugfix: Fixes reported VVX 310 call issues (M16991)
- Bugfix: Use Datetime offset from the configuration file even if provided by the DHCP server (M17165)
Unified End Point Support
- Unified End Point Support v.2.0.1 Show release notesHide release notes
- Bugfix: Make timeout configurable and increase default value for request reset flag. (M17155)
- Bugfix: Avoid opening more files than the default ulimit value. (M0)
SNMP Agent
SNMP Agent v.3.12.2 (intermediate version) Show release notesHide release notes
- Bugfix: probe were not working on ProLiant older than G9 (M15980)
SNMP Agent v.3.12.1 (intermediate version) Show release notesHide release notes
- Bugfix: Upgrade of SNMP Agent on Baseline 3 could fail (M15964)
SNMP Agent v.3.12.0 (intermediate version) Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774)
- Improvement: Improve dahdi probe for lua expression (M15598)
- Improvement: Improve sip probe for lua expression (M13970)
- Bugfix: Upgrade SNMP subsystem for HP hardware probes support (M15763)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded (M14774)
- Deprecated: Upgrade from previous version is failing on Baseline 3 (M15964)
SNMP Agent v.3.11.2 (intermediate version) Show release notesHide release notes
- Bugfix: SNMP agent was not restarted when it crashed and the machine was in standby mode (PC-1142)
SNMP Agent v.3.11.1 (intermediate version) Show release notesHide release notes
- Improvement: Improve sip probe for lua expression (backport) (M13970)
- Bugfix: probe were not working on ProLiant older than G9 (backport) (M15980)
SNMP Agent v.3.11.0 (intermediate version) Show release notesHide release notes
- Bugfix: Support DL360 G9 and DL20 (M15310)
- Deprecated: The installation could fail on some type of Server (M0)
SNMP Agent v.3.10.0 (intermediate version) Show release notesHide release notes
- Feature: Include finished calls passed during the last polling period in computation (M11435)
- Feature: Support of Dahdi Trunk (M9308)
- Bugfix: Fix false positive errors when installed on vsop (backport)(M12943)
SNMP Agent v.3.9.0 (intermediate version) Show release notesHide release notes
- Feature: Rating oriented probe to check connectivity (M13333)
- Feature: Rating oriented probe for monitoring daily rating (M13332)
- Improvement: Support internal error in Dialogic DSI probe (M13812)
- Bugfix: SNMP agent not restarting on vHost if other instances already running in vSOPs (M14218)
SNMP Agent v.3.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed error with dmidecode command on vsops (M0)
SNMP Agent v.3.8.0 (intermediate version) Show release notesHide release notes
- Feature: Add SNMP agents for monitoring HP hardware (Backport) (M12556)
- Feature: Added probe to monitor SOP cluster syncronization (Backport) (M112522)
- Improvement: SMPP queue monitoring (Backport) (M11421)
- Bugfix: Stopping snmpd on the vSOP host was causing the stop of snmpd on all vSOPs (Backport) (M9792)
SNMP Agent v.3.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: missing system dependencies
SNMP Agent v.3.7.0 (intermediate version) Show release notesHide release notes
- Improvement: Probes will never run longer than a fixed time anymore (M11688)
- Deprecated: Missing system dependencies
Communication Server
Communication Server v.3.15.3 (intermediate version) Show release notesHide release notes
- Bugfix: Define multiple range of CICS (M17043)
- Bugfix: Fix crash during func_odbc reload (backport) (M16670)
- Bugfix: Crash when handling codec's payloads (backport) (M16969)
- Deprecated: Higher version provide significant improvements (M0)
New resource versions
- Generic Memory Usage
- Generic Memory Usage v.1.1.0 Show release notesHide release notes
- Bugfix: Graphs generation code fixed. (M8461)
- Improvement: Factorized common features from physical sops and virtual sops. (M8461)
Generic CPU Usage
PolycomIP331
PolycomIP650
PolycomVVX101
PolycomVVX1500
PolycomVVX201
PolycomVVX300
PolycomVVX301
PolycomVVX310
PolycomVVX311
PolycomVVX400
PolycomVVX401
PolycomVVX410
PolycomVVX411
PolycomVVX500
PolycomVVX600
Unified End Point SIP peer
- Unified End Point SIP peer v.1.7.0 Show release notesHide release notes
- Feature: Support cluster & active-active setups: the configuration file publishes the address of both SOP1 & SOP2 (M16210) - link
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.6.0 - Deprecated
Release notes
- Feature: Added support for VVX 101, 201, 301, 311, 401, 411 (M16013)
- Feature: Added specific profile to connect generic device (conference phone, door phone) (M15630)
- Feature: Added the possibility to play a busy tone when on the phone (M16023)
- Feature: Is is now to have differentiated behaviour "When I am on the phone" for internal and external calls (M16024)
- Improvement: Firmware of IP331 has been upgraded (M16829)
- Bugfix: Forwarding to external number from Call Queuer and Shortnumber was not working (M15651) (M16274)
- Bugfix: Anonymous call from UEP were not detected (M15507)
- Bugfix: Password for the phone on Internet were not correct (M16679)
- Bugfix: It was not possible to record the welcome voicemail message in the IVR and the Call Queuer (M16400)
- Bugfix: Join and leave announcement where not in the user's language (M16253)
- Bugfix: It was not possible to call the short codes from UEP (M16314) (M16396)
- Bugfix: The IVR option voicemail was not working (M16399 )
- Bugfix: Fail2ban configuration was broken by the reinstallation of the Firewall module (M15083)
- Bugfix: It was not possible to configure the extended subnets of the DHCP (M16152)
- Bugfix: Fixed French translation for CFU (M16237)
- Bugfix: 'Block anonymous calls' was not working (M15499)
- Deprecated: VVX firmware faced several stability issues (M16654)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
| Reboot of all the Polycom VVX and IP331 phones in order to upgrade the new Firmware |
Changed components
Show changed componentsHide changed components
New module versions
- Shell
- Shell v.1.23.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774)
- Bugfix: Shell plugins were not accessible for escaux user (M13994)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade other modules too. The module documentation lists special upgrade actions for this version (M14774)
- Deprecated: Login on Fileman was no more possible (M17628)
Test SMP Connectivity
Test SMP Connectivity v.1.0.1 (intermediate version) Show release notesHide release notes
- Deprecated: outdated (M0)
Firewall
Polycom Phone Support
- Polycom Phone Support v.5.5.0 Show release notesHide release notes
- Feature: Upgrade IP331 firwmare to enable internet (M16829)
- Deprecated: The firmware 5.5.0 offered in this release have several stability issue (M16654)
Polycom Phone Support v.5.4.0 (intermediate version) Show release notesHide release notes
- Improvement: Upgrade VVXs firmware version to 5.5.0 (M15891)
- Feature: Add support for VVX101, VVX201 (M15901)
- Feature: Add support for VVX101, VVX201, VVX301, VVX401, VVX411 (M15901)
- Deprecated: The firmware 5.5.0 offered in this release have several stability issue (M16654)
Polycom Phone Support v.5.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow provisioning to configure fail2ban (M14898)
Communication Server
- Communication Server v.3.15.2 Show release notesHide release notes
- Bugfix: Conf bridge announcements not played in the user's language (backport) (M16253)
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.1 (intermediate version) Show release notesHide release notes
- Bugfix: Process crashed in case of ccOriginate API call (M16768)
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.0 (intermediate version) Show release notesHide release notes
- Feature: Call swapping and transfer on media-strict PBX (M16247)
- Improvement: Packaging compatible with APT (M16327)
- Improvement: Ability to not send ISUP FAR message (M16226)
- Improvement: HTTP action func_curl now allows multiple headers (M16333)
- Improvement: Support recent cipher suites for tls (M15787)
- Bugfix: Memory leak when error on outgoing MWI suscription (M16288)
- Bugfix: Leak and global lock in HTTP action func_curl removed (M16333)
- Bugfix: Parsing crash of diversion header (M16349)
- Deprecated: Process crashes in case of ccOriginate API call (M16768)
Communication Server v.3.14.3 (intermediate version) Show release notesHide release notes
- Bugfix: Custom unavailable minivm greeting was never played (backport) (M16855)
- Bugfix: The recorded name was not used when the option skip fallback was used (backport) (M16855)
- Deprecated: Higher version provide significant improvements (M0)
New resource versions
PolycomVVX201
PolycomVVX301
PolycomVVX401
PolycomVVX311
PolycomVVX411
PolycomVVX410
PolycomVVX410 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX400
PolycomVVX400 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX310
PolycomVVX310 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX300
PolycomVVX300 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX1500
PolycomVVX1500 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX500
PolycomVVX500 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX600
PolycomVVX600 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomIP331
PolycomIP331 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomIP650
PolycomIP650 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.5.2 - Early deployment 
Restricted release!
Release notes
- Improvement: Local Password was deprecated
- Bugfix: Support for subscribe context (M15507) - link
- Bugfix: Unified End Point Abstraction in the auto-provisioning files (M16716) - link
- Bugfix: Firewall was blocking the net.Console and did not take into account the RTP port range (M16790) - link
- Bugfix: Template resources were not correct for Internet phones (M16679) - link
- Bugfix: Crash of asterisk in case of Originate (M16768) - link
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
Communication Server
- Communication Server v.3.14.2 Show release notesHide release notes
- Improvement: removed dependency with shell 1.23 (M0)
- Bugfix: Process crashed in case of ccOriginate API call (M16768) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.14.1 (intermediate version) Show release notesHide release notes
- Improvement: Compatibilty with updated fail2ban (M15083) - link
- Bugfix: Local networks are now whitelisted in fail2ban (M16059) - link
- Bugfix: Solve crashes when parsing JSON (M15859) - link
- Bugfix: Avoid codec negotiation loop in Alcatel call swapping (M15862) - link
- Bugfix: Dynamic payload change was not working (M16025) - link
- Bugfix: Prevent SDP-version-ignore in case of codec re-negotiation (M15994) - link
- Bugfix: Installation failed if older firewall module was present (M15989) - link
- Deprecated: Process crashes in case of ccOriginate API call (M16768) - link
Communication Server v.3.14.0 (intermediate version) Show release notesHide release notes
- Feature: Add option to skip the fallback in MinivmGreet application (M14606) - link
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: Compatibility with Chrome 52 for WebRTC external calls (M15479) - link
- Improvement: Add firewall rules (M15082) - link
- Bugfix: Fix small memory leak on every WebRTC call (M15479) - link
- Bugfix: Minivm tmp folder was not always created (M13783) - link
- Bugfix: Fix to get the sub directory (tmp) in minivm (M13783) - link
- Bugfix: Crash occurring when parsing the SIP message 181 forwarding (M15369) - link
- Deprecated: Higher version provide significant improvements (M0)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
New resource versions
- ReportCDR
- ReportCDR v.2.13.5 (intermediate version) Show release notesHide release notes
- Bugfix: Userfield filter was not taken into account (M15004) - link
- Deprecated: Missmach between report with comma and dot separated values (M15842) - link
ReportCDR v.2.13.4 (intermediate version) Show release notesHide release notes
- Bugfix: Userfiled filter was not saved (M15004) - link
- Deprecated: Missmach between report with comma and dot separated values (M15842) - link
SIP Trunk
SIP Trunk v.2.3.0 (intermediate version) Show release notesHide release notes
- Improvement: Support progress in-band per peer (M15139) - link
- Improvement: Number of call saved in configuration file for the new probe (M13970) - link
SIP Trunk v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: G.722 support (M12725) - link
- Improvement: Improve support of Caller ID method (M13191) - link
Unified End Point SIP peer
Unified End Point SIP peer v.1.5.0 (intermediate version) Show release notesHide release notes
- Feature: Support for feature management (M14931) - link
- Feature: Add language synchronization support (M0)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.5.1 - Early deployment Restricted release!
Release notes
- Feature: Configuration of the Intra-Cluster routing is now obsolete (M15803) - link
- Feature: Added the possibility to configure more IP routes (M15496) - link
- Feature: The Internet Phone is now activable in the User's profile (M15494) - link
- Feature: Added the possibility to play a busy tone when on the phone (M16023) - link
- Feature Added the possibility to make a difference between internal and external callers for the busy action (M16024) - link
- Feature: Added the possibility to configure more than 16 subnets in the DHCP (M16152) - link
- Improvement: Simplification of the Internet Phone configuration (M15494) - link
- Improvement: Virtual faxes are now pre-provisioned (M15497) - link
- Improvement Template shortcode are now accessible via ## or 85 prefixes (M0)
- Imporvement: Added more Subnet Masks when configuring routes (M0)
- Bugfix: Prevent balcklisting of UEP (M16059) - link
- Bugfix: SIP Progress were not forwarded anymore (M13756) - link
- Bugfix: Outgoing call from physical faxes were not working (M15774) - link
- Bugfix: Emergency number formatting was not working first interface (M15624) - link
- Bugfix: SOP API call from callflow was not working (M15819) - link
- Bugfix: Blind transfer in net.Console was not working (M15678) - link
- Bugfix: Added all fixes included in 4.4.1 and 4.4.2 (M15601) - link
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- FAX Server
- FAX Server v.2.4.2 (intermediate version) Show release notesHide release notes
- Bugfix: Add additional supported content types for PDF files for email to fax (M13793) - link
- Improvement: Allow disabling the body of the message (M13807) - link
- Deprecated: The apply-sop-change was not working properly (M0)
Mail Server
SOP API
- SOP API v.4.16.0 Show release notesHide release notes
- Bugfix: Ensure the filtering works for directory entries and external contacts. Ensure that error messages are returned in the correct format. Deprecate external sources of contact. Usage of UCModel is recommended (M14208) - link
SOP API v.4.15.2 (intermediate version) Show release notesHide release notes
- Feature: Allowing AdminVAR modification when request comes from local IP (M17391) - link
SOP API v.4.15.1 (intermediate version) Show release notesHide release notes
- Feature: Expose default value for enumerations (M15486) - link
Network
Software sources
New resource versions
Unified End Point SIP peer
MeshSipTrunk
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.5.0 - Early deployment Restricted release!
Release notes
- Feature: Added the possibility to configure Polycom on Internet (M15162) - link
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
Network
- Network v.2.0.2 Show release notesHide release notes
- Bugfix: Installation of the module took a very long time when no address was configured on eth1 and/or eth2 and DNS servers take a long time to respond (M0)
- Bugfix: The SMP connections were not reset properly after the network reconfiguration, causing a long reconnection time (M14596) - link
Network v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Static host entries were removed when the Network module was installed
Network v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Deprecated: Static host entries were removed when Network module was installed
Network v.1.24.1 (intermediate version) Show release notesHide release notes
- Bugfix: Static host entries were removed when the Network module was installed
Network v.1.24.0 (intermediate version) Show release notesHide release notes
- Feature: Added 4 new routes (M15495) - link
Software sources
- Software sources v.1.2.1 Show release notesHide release notes
- Bugfix: Connection to the SMP could be lost when the System Base module was downgraded to a version before 1.6.0 (M14760) - link
- Deprecated: Permissions on the hosts file were incorrect (M15819) - link
Firewall
- Firewall v.2.1.0 Show release notesHide release notes
- Feature: Fail2ban support (M14743) - link
- Improvement: Enable SIP TCP and SIP TLS for SOP (M14743) - link
- Bugfix: Allow SOP connection to SMP APT repository
- Bugfix: Additional Filter Pre-rules were not parsed
System Base
- System Base v.2.2.1 Show release notesHide release notes
- Bugfix: Add mission version from packages (M0)
- Bugfix: Restored the package escaux-evaluate (M0)
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Resource cleanup tool (M14313) - link
- Improvement: Added the ability to rotate logs file hourly (M13315) - link
- Bugfix: Coredumps were not generated in some cases (M13582) - link
- Bugfix: When doing rollback the configuration files were not restored (M14238) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Connection to the SMP could be lost when the module was downgraded to a version before 1.6.0 (M14760) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Provide hooks when the SSH connection is starting or stopped (M12594) - link
- Deprecated: Connection to the SMP could be lost when the module was downgraded to a version before 1.6.0 (M14760) - link
System Base v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Improvement: Move password generation to software sources module (M0)
- Improvement: Move escaux-evaluate package to SOP Base module (M0)
- Bugfix: Configuration management tool was not able to set a "0" value (M0)
- Bugfix: There was a memory leak in the SMP connection daemon (M13481) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: Cluster synchronization broke prompt symlinks (M18867) - link
- Improvement: Remove unused daemon process that caused memory issues (M19120) - link
- Feature: Added local tasks support (Backport)(M18513) - link
System Base v.1.12.2 (intermediate version) Show release notesHide release notes
- Bugfix: Apply changes could remove configuration in some rare cases (M16800) - link
- Bugfix: Remove obsolete public key (M16229) - link
- Deprecated: Unused daemon process was causing high memory usage (M19120) - link
System Base v.1.12.1 (intermediate version) Show release notesHide release notes
- Bugfix: Coredumps appeared on the VSOP host filesystem instead of the VSOP filesystem (M16350) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support of extended speeddials in Fusion 3 (M15395) - link
- Bugfix: Installation of apt modules issue when mixed with non apt(Backport) (M14760) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Resource cleanup tool (M14313) - link
- Improvement: Added the ability to rotate logs file hourly (Backport) (M13315) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.4.4 - Early deployment
Release notes
- Improvement: Added support for the Polycom VVX 501 and 601 (M16527)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| All Polycom phone needs to be rebooted in order to upgrade the firmware |
Changed components
Show changed componentsHide changed components
New module versions
- Polycom Phone Support
- Polycom Phone Support v.5.7.0 Show release notesHide release notes
- Feature: Support Polycom VVX501 and VVX601 (M16527)
- Feature: Added the ability to define firmware upgrade schedule (M18512)
New resource versions
PolycomVVX601
PolycomVVX411
PolycomVVX411 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PhoneZeroConf
PolycomIP331
PolycomIP331 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomIP650
PolycomIP650 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX101
PolycomVVX101 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX1500
PolycomVVX1500 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX201
PolycomVVX201 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX300
PolycomVVX300 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX301
PolycomVVX301 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX310
PolycomVVX310 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX311
PolycomVVX311 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX400
PolycomVVX400 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX401
PolycomVVX401 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX410
PolycomVVX410 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX500
PolycomVVX500 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
PolycomVVX600
PolycomVVX600 v.5.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to disable the directory softkey (M18395)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.4.3 - Early deployment
Release notes
- Feature: Added support of Polycom VVX101, VVX201, VVX301, VVX401, VVX411 (M18264) (M18270)
- Bugfix: Voicemail prompt issue in Spanish (M18299)
- Bugfix: External number forward from CallQueuer and ShortNumber was not possible (M18269)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| All Polycom phone needs to be rebooted in order to upgrade the firmware |
Changed components
Show changed componentsHide changed components
New module versions
Polycom Phone Support v.5.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: VVX firmware upgrade to 5.5.1 fixing VVX 300,310,400 and 410 slowness after upgrade (M16654)
- Bugfix: Fixes reported VVX 310 call issues (M16991)
- Bugfix: Use Datetime offset from the configuration file even if provided by the DHCP server (M17165)
Polycom Phone Support v.5.5.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade IP331 firwmare to enable internet (M16829)
- Deprecated: The firmware 5.5.0 offered in this release have several stability issue (M16654)
Polycom Phone Support v.5.4.0 (intermediate version) Show release notesHide release notes
- Improvement: Upgrade VVXs firmware version to 5.5.0 (M15891)
- Feature: Add support for VVX101, VVX201 (M15901)
- Feature: Add support for VVX101, VVX201, VVX301, VVX401, VVX411 (M15901)
- Deprecated: The firmware 5.5.0 offered in this release have several stability issue (M16654)
Polycom Phone Support v.5.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow provisioning to configure fail2ban (M14898)
Sounds
Sounds v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Allow empty SOP directory field (M15782)
Sounds v.1.12.0 (intermediate version) Show release notesHide release notes
- Bugfix: Missing prompts added for Unavailable and Busy greetings (M13713)
Sounds v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Add English 'Corporate Mode Is Unavailable' Prompt (M0013819)
- Feature: New voicemail prompts added for en/fr/nl (M0013713)
- Improvement: Don't raise an error when the prompt directory is not found in SMP (M15589)
New resource versions
PolycomVVX500
- PolycomVVX500 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX500 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomVVX500 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX500 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomIP331
- PolycomIP331 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP331 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomIP331 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP331 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomIP650
- PolycomIP650 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP650 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomIP650 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP650 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomVVX101
- PolycomVVX101 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX1500
- PolycomVVX1500 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX1500 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomVVX1500 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX1500 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX201
- PolycomVVX201 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX300
- PolycomVVX300 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX300 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomVVX300 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX300 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX301
- PolycomVVX301 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX310
- PolycomVVX310 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX310 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomVVX310 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX310 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX311
- PolycomVVX311 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX400
- PolycomVVX400 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX400 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomVVX400 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX400 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX401
- PolycomVVX401 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX410
- PolycomVVX410 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX410 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomVVX410 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX410 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
PolycomVVX411
- PolycomVVX411 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX600
- PolycomVVX600 v.5.7.0 Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX600 v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: IP331 on internet (M16829)
- Improvement: Normalize date and time display for VVXs (M15863)
PolycomVVX600 v.5.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX600 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.4.2 - Early deployment
Release notes
- Bugfix: Faxes were not allowed to make external call (M15774)
- Bugfix: Early media was not forward to SIP Phones (M13756)
- Bugfix: It was not possible to ring an extension without primary phone (M15906)
- Bugfix: The Cisco SPA112 and SPA8000 are now configure with a generic Dialplan (M15606)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
PolycomVVX601
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.4.1 - Early deployment
Release notes
- Bugfix: The apply-sop-change was indicating some errors (M15111)
- Bugfix: mail could use lots of disk space (M14683)
- Bugfix: it was not possible to call a national number from Escaux Connect (M15057)
- Bugfix: The LDAP module version was incorrect (M15101)
- Bugfix: Short number were not working (M14927)
- Bugfix: Offhook call placement was activated on the Polycom Virtual Phones (M15302)
- Bugfix: It was possible to bypass the call screening (M15059)
- Bugfix: Some probe were giving errors (M14181)
- Bugfix: Default language was not used when changing status via ##77 (M15466)
- Bugfix: CRM contacts were not merged (M14208)
- Bugfix: Activation of Call Forward on Busy via ##792 was not working (M15400)
- Bugfix: Updated translation catalog (M15111)
- Bugfix: The country code extracted from the Caller ID could be incorrect (M15245)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- FAX Server
- FAX Server v.2.4.2 (intermediate version) Show release notesHide release notes
- Bugfix: Add additional supported content types for PDF files for email to fax (M13793)
- Improvement: Allow disabling the body of the message (M13807)
- Deprecated: The apply-sop-change was not working properly (M0)
Mail Server
- Mail Server v.1.5.4 Show release notesHide release notes
- Bugfix: Disk space issue caused by local mailboxes (Backport)(M14683)
- Bugfix: Force secure mode as default (Backport)(M14683)
SOP API
- SOP API v.4.16.0 Show release notesHide release notes
- Bugfix: Ensure the filtering works for directory entries and external contacts. Ensure that error messages are returned in the correct format. Deprecate external sources of contact. Usage of UCModel is recommended (M14208) - link
SOP API v.4.15.2 (intermediate version) Show release notesHide release notes
- Feature: Allowing AdminVAR modification when request comes from local IP (M17391) - link
SOP API v.4.15.1 (intermediate version) Show release notesHide release notes
- Feature: Expose default value for enumerations (M15486) - link
New resource versions
- SIP selftest
- SIP selftest v.1.5.4 (intermediate version) Show release notesHide release notes
- Bugfix: SIP selftest was always failing after upgrade of the communication server (M21130)
Unified End Point SIP peer
SyncCDRDB
- SyncCDRDB v.2.3.2 Show release notesHide release notes
- Bugfix: Fix false error when doing apply change (M0)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.4.0 - Deprecated
Release notes
- Feature: Take into account the country code of the caller when reformatting the dialed number (M14531)
- Feature: Added the possibility to send the redirecting number or not in the OutgoingCallCatcher (M14693)
- Improvement: For a standard configuration no more incomingCallCatcher are needed (M14593)
- Improvement: The Application Management Server logging is now disabled by default (M14490)
- Bugfix: External call forwarded to an external number were rejected by the operator (M14693)
- Bugfix: CallHistory did not show the call with called in the plus E164 format (M14737)
- Bugfix: The drop down for ReceptionExtension in the TemplateReceptionist profile was always emty
- Bugfix: Only the two first iaxmodems were used to handle calls
- Bugfix: Some profile parameters were not shown in Escaux Connect (M14780)
- Bugfix: The department was actually making a group pickup
- Bugfix: ccOriginate was failing when the caller was an external number (M14727)
- Bugfix: The labels of some user's profile parameters where not translated (M14970)
- Bugfix: The shell module was not installed properly (M14665)
- Bugfix: LDAP module resintallation failed (M15021)
- Bugfix: The CallerNumber provided in the hooks should always be the internal extension (M14666)
- Bugfix: The SOP reconnection to the SMP when reinstalling the networl module could be very long (M14956)
- Bugfix: The timezone of the Polycom phone was incorrect when the module was installed during the DST period (M14953)
- Bugfix: It was not possible to the use the specific incomingCallCatcher any more (M14593)
- Bugfix: Archived attribute logs where never rotated and table was not optimzed after cleanup (M10409)
- Bugfix: When a user's extension was created in the directory, some default profile parameter values were missing (M14711)
- Bugfix: Some Spanish voicemail prompts were missing (M14690)
- Bugfix: The Spanish prompt asking for the pincode was incorrect (M14691)
- Bugfix: The automatic NAT detection was not working (M14090)
- Bugfix: The Application Management Server could generate too much logging (M13315)
- Bugfix: The national number reformating in E164 was not working for some countries such as Spain and Italy (M14818)
- Bugfix: It was not possible to configure an extrenal caller ID for physiscal faxes (M14687)
- Bugfix: The user's pincode could be reset during the night (M14732)
- Bugfix: The profile parameter were not provided by default in the user's language (M14785)
- Deprected: This version need to be put in cheat mode in order to be able to install it. Please consider using the 4.4.1 or higher instead
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart Communication Server |
| Restart Application Management Server |
| The IncomingCallCatcher are not ma,datory any more, they can be removed from the configuration |
Changed components
Show changed componentsHide changed components
New module versions
- Codec G.729 Annex A
- Codec G.729 Annex A v.3.1.0 Show release notesHide release notes
- Improvement: Removed unused configuration parameter (M0)
- Improvement: There was some false error message at installation time (M0)
Communication Server
- Communication Server v.3.13.0 Show release notesHide release notes
- Feature: MiniVM Support (M13781)
- Feature: MiniVM folder management support (M13780)
- Feature: MiniVM greeting management support (M13671)
- Feature: Fail2ban support (M14743)
- Feature: Support of custom CDR fields on ODBC (M13662)
- Feature: Early Media Suppression (M13756)
- Bugfix: Reload was needed to apply linear queue strategy (M13530)
- Bugfix: Fix WebRTC hold regression (M14070)
- Bugfix: When remote end sends a reinvite to change the codec, transcoding was not reinitialized (M13624)
- Bugfix: When remote end answers to a reinvite with several codecs, the channel codec was not the first codec proposed in the SDP (M13624)
- Bugfix: Process coredumps were not created in some cases (M13582)
- Bugfix: Misconfigured presence subscriptions could leak memory (M14357)
- Bugfix: RTP port not freed after fast ICE failure (M14502)
- Bugfix: NAT detection not always working (M14090)
- Bugfix: It was not possible to force the Caller ID in the Originate when the connected line is updated (M14727)
- Bugfix: Process failed to start after a fresh installation (M14951)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: In-band ringing setting "never" is now stricter. Must be changed to "no" to keep previous behavior (M13756)
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.12.0 (intermediate version) Show release notesHide release notes
- Improvement: Scalability and robustness registration flags (M11512)
- Improvement: Do not register at server startup (M13791)
- Bugfix: recvonly was missing in the SDP of the SIP trunk when a sendonly was received (M13299)
- Bugfix: RTP probation was not working (M12797)
- Bugfix: escall was not working when ulaw was not configure in the module (M13476)
- Bugfix: Define the maximum number of calls (M13602)
- Deprecated: Process failed to start after a fresh installation (M14951)
Communication Server v.3.11.10 (intermediate version) Show release notesHide release notes
- Improvement: Move ha scripts to asterisk (backport) (M17031)
- Bugfix: RTP ports were not freed after connectivity loss while ringing (backport) (M17516)
Communication Server v.3.11.9 (intermediate version) Show release notesHide release notes
- Bugfix: Fix crash during func_odbc reload (backport) (M16670)
- Improvement: Allow to configure HTTP bind address (backport) (M16508)
Communication Server v.3.11.8 (intermediate version) Show release notesHide release notes
- Bugfix: T38 was only working on eth0 (M16616)
- Deprecated: Apply changes fails because of syntax error in perl_code
Communication Server v.3.11.7 (intermediate version) Show release notesHide release notes
- Bugfix: Crash parsing diversion header (M16349)
- Deprecated: Apply changes fails because of syntax error in perl_code
Communication Server v.3.11.6 (intermediate version) Show release notesHide release notes
- Bugfix: Solve crashes when parsing JSON (backport) (M15859)
Communication Server v.3.11.5 (intermediate version) Show release notesHide release notes
- Improvement: Compatibility with Chrome 52 for WebRTC external calls (backport) (M15479)
- Bugfix: Fix small memory leak on every WebRTC call (backport) (M15479)
Communication Server v.3.11.4 (intermediate version) Show release notesHide release notes
- Bugfix: RTP port not freed after fast ICE failure (backport) (M14502)
Communication Server v.3.11.3 (intermediate version) Show release notesHide release notes
- Improvement: WebSocket connections more stable (backport) (M14354)
- Bugfix: Misconfigured presence subscriptions could leak memory (backport) (M14357)
Application Management Server
- Application Management Server v.3.4.1 Show release notesHide release notes
- Improvement: Added the possibility to configure the activation or not of the logging (M14490)
- Bugfix: Mserver were generating too much logs (M13315)
- Bugfix: Attribute state were not saved with the original timestamp (M14732)
Shell
Database Schema
- Database Schema v.2.10.0 Show release notesHide release notes
- Feature: Possibility to optimize the tables (backport) (M10409)
- Feature: Possibility to cleanup archived files (backport) (M10409)
Database Schema v.2.9.0 (intermediate version) Show release notesHide release notes
- Improvement: Add custom CDR fields (usertag and usernote) (Backport)(M13662)
- Bugfix: Decrease apply changes duration on smp level (Backport) (M14120)
Database Schema v.2.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Better cache serialization of data (Backport) (M13856)
SOP API
- SOP API v.4.15.0 Show release notesHide release notes
- Bugfix: extension's owner language was not taken into account in dbGetProfileParameters and dbGetProfileParametersLayout (M14785) - link
- Bugfix: Incorrect parameter permission when same parameter name is used in different parameter sets (M14780) - link
- Bugfix: The context of the extension was not consistently set (M14780) - link
- Bugfix: New API Method to optimize phone_overview on SMP (M14512) - link
- Bugfix: dbAuthenticate did not update the the secondary SOP (M14732) - link
SOP API v.4.14.0 (intermediate version) Show release notesHide release notes
- Feature: Unlimited parameter size for speeddials (M14143) - link
- Bugfix: In case of ccOriginate from a number instead a phone, the context of the phone's ext must be used (M14727) - link
- Bugfix: CallHistory did not show the call with called in the plus E164 format (M14737) - link
Polycom Phone Support
- Polycom Phone Support v.5.3.0 Show release notesHide release notes
- Feature: Connect phones over internet (M14742)
- Feature: Fail2ban support (M14743)
- Bugfix: Fixed false error message (M0)
- Bugfix: Timezone was not always correct when the timezone name was provided in input (M14953)
Sounds
Network
- Network v.1.23.2 Show release notesHide release notes
- Bugfix: The SMP connection were not reset properly after teh network reconfiguration, causing a long reconnection time (M14596)
Network v.1.23.0 (intermediate version) Show release notesHide release notes
- Feature: Missing IP aliases parameter for eth2 (M9960)
LDAP Server
LDAP Server v.1.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: Exposed all documented attributes (M0)
LDAP Server v.1.7.0 (intermediate version) Show release notesHide release notes
- Bugfix: Remove old mapping on installation (M11734)
- Feature: Expose new attributes (M11734)
New resource versions
PolycomVVX600
PolycomVVX410
PolycomVVX300
PolycomVVX310
PolycomVVX1500
PolycomVVX500
PolycomIP331
PolycomIP650
New action versions
- STARTFAXAPPLICATION.3.13.0
- STARTFAXAPPLICATION.3.13.0 v.3.13.0 Show release notesHide release notes
- Improvement: Only generate fax server configuration on specified sops for better synchronization performance (M11336) - link
- Bugfix: Only the first two iaxmodems were able to handle the calls on Communication Server
Included components
Modules
Resources
Actions
Version 4.3.0 - Deprecated
Release notes
- Feature: Added new language in the net.Console (M12497)
- Feature: net.Console uses the language defined for the user (M12497)
- Feature: Added new commands to the SOP CLI(M12681)
- Feature: Added default language when calling some special feature code such as the PUM login (M11111)
- Feature: Added support for hooks before calling a device, a queue or an interface (M11106)
- Feature: Support for UEP SIP Trunk (M14140)
- Feature: Support for default incoming call catcher (M13838)
- Improvement: More granular ringing time settings (M14414)
- Bugfix: Caller Number was not updated in the CDR Report (M13837)
- Bugfix: Called Number was not updated in the CDR Report (M13837)
- Bugfix: Sip Selftest probe was not installed properly
- Bugfix: The documentation for the profile Template-SOP was not correct
- Bugfix: It was not possible to generate the configuration of the VVX400 (M14074)
- Bugfix: There was permissions issues with SOP Shell (M12835)
- Bugfix: When doing rollback the configuration files were not restored (M14238)
- Bugfix: ccOriginate was not possible on a resource inherited from a template resource (M14186)
- Bugfix: CRM source filter was not taken into account by the SOP API (M14128)
- Bugfix: There was no check that a number with the OutgoingDialPrefix was properly reformatted (M14399)
- Bugfix: CFB via ##792+ was not working
- Deprecated: It is recommended to use the version 4.4.x instead of this version. The 4.4.x contains several important bug fixes
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart Communication Server |
| Restart Application Management Server |
| Reinstall net.Console |
| In case of update, check SDX6 resources. A new master resource SDX6 is added in Fusion 4.3. Don't forget to use it as template for existing SDX6 |
| In case of update, create an extension 'DefaultIncomingCallCatcher' |
| If fax connected on the Cisco ATA Box are in use, please create and use this new profile "TemplateFax" and configure the Callerid for outgoing faxes |
| For SOP in Germany, if they use fax connected behind Cisco device, please adapt the dialplan as following: ([1-9]xxxS0|1[01]x|1[2]xx|00xx.|000xx.) |
Changed components
Show changed componentsHide changed components
New module versions
- Shell
- Shell v.1.22.0 Show release notesHide release notes
- Bugfix: Possibly shell injection issues fixed. (M12681)
- Feature: Added ll, grep and free command. (M12681)
- Bugfix: Access to unauthorized files prevented. (M12681)
- Feature: Allow some options for disk_usage, grep, free. (M12681)
- Feature: Added uptime information to system_info. (M12681)
- Feature: Allowed access to /tftpboot/ * and /etc/crond.d/ * files from sopcli (M12681)
- Bugfix: Add escaux shell to shells list (M13125)
- Deprecated: Shell plugins were not accessible for escaux user (Backport)(M13994)
- Shell v.1.21.1 (intermediate version) Show release notesHide release notes
- Bugfix: Not possible to change the password in local admin password module on Baseline 3 (M9008)
- Bugfix: Removed the ability to shutdown or reboot sop via shortcut command (M11392)
- Bugfix: Full length of the password is now checked on Baseline 2 and 1 (M11476)
SOP API
- SOP API v.4.13.1 Show release notesHide release notes
- Bugfix: Fixed dbAuthenticate running forever on cluster configuration (M14290) - link
- Bugfix: PUM login/logout API was not working with the module Polycom Phone Support 5.0 (M13628) - link
- Bugfix: ccOriginate was not possible on a resource inherited from a template resource (M14186) - link
- Bugfix: Fixed pumLogin and pumLogout Internal Server error (M13628) - link
SOP API v.4.13.0 (intermediate version) Show release notesHide release notes
- Feature: Allow cluster synchronization to run status change callflow (M13509) - link
- Improvement: Added the possibility to retrieve a single parameter and its raw value (M14164) - link
- Bugfix: It was not possible to leave a voicemail after using ccRecord (M13834) - link
- Bugfix: Fixed source filter in dbGetDirectoryInfo (M14128) - link
Unified Communication Model
- Unified Communication Model v.1.13.0 Show release notesHide release notes
- Feature: Allow netConsole to obtain language from the SOP (M12497)
- Deprecated: Profile synchronization was not completely switched off (M18546)
net.Console
Unified End Point Support
Communication Server
- Communication Server v.3.11.2 Show release notesHide release notes
- Bugfix: Reload was needed to apply linear queue strategy (backport) (M13530)
- Bugfix: Update ICE stack fixing some crashes (backport) (M14190)
- Bugfix: Fix WebRTC hold regression (backport) (M14070)
System Base
- System Base v.1.10.1 Show release notesHide release notes
- Bugfix: Some scripts were not executable causing them to fail (M14144)
- Bugfix: Coredumps were not created in some cases (M13582)
- Bugfix: When doing rollback the configuration files were not restored (M14238)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
System Base v.1.10.0 (intermediate version) Show release notesHide release notes
- Improvement: Move password generation to software sources module (Backport) (M0)
- Bugfix: Configuration management tool was not able to set a "0" value (Backport) (M0)
- Bugfix: There was a memory leak in the SMP connection daemon (Backport) (M13481)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
New resource versions
- SIP Trunk
- SIP Trunk v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Inbound authentication user is now configurable (M11840)
- Feature: Allow overriding SIP URI domain (M11628)
- Feature: Symmetric Response Routing (M11628)
- Feature: Add notify format (M11907)
SIP Trunk v.1.55.1 (intermediate version) Show release notesHide release notes
- Bugfix: Some characters in register password were not accepted (TS-587)
SIP Trunk v.1.55.0 (intermediate version) Show release notesHide release notes
- Improvement: Number of call saved in configuration file for the new probe (Backport) (M13970)
SyncCDRDB
- SyncCDRDB v.2.3.1 Show release notesHide release notes
- Bugfix: Caller number change was not taken into account (M13837)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Unified End Point SIP peer
New action versions
Included components
Modules
Resources
Actions
Version 4.2.2 - Early deployment
Release notes
- Improvement: Added zero conf task in template
- Improvement: Faster phone firmware download. The blocksize of the TFTP server is now 1024 instead of 512 (M13233)
- Bugfix: Callback was not working on VSOP (M13548)
- Bugfix: Extension's presence state were not available in Escaux Connect (M13639)
- Bugfix: It was not possible to ring the mobile number was the Unified End Point was unregistered (private mode)
- Bugfix: It was not possible to set the service availability extension in the Time Checker (M13599 )
- Bugfix: Improve readability of escaux-callback log (M13771)
- Bugfix: The callerID name is now set to the same value than the callerID number
- Bugfix: There was a false error when installing the NTP Server on a VSOP (M12492)
- Bugfix: escall was no more working (M13476)
- Bugfix: there was some error when installing the DHCP Server (M13259) (M13115)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart Communication Server |
Changed components
Show changed componentsHide changed components
New module versions
TFTP Server
Communication Server
NTP server
New resource versions
No new resource versions.
New action versions
- STARTDYNAMICAPPLICATION.8.4.2
Included components
Modules
Resources
Actions
Version 4.2.1 - Early deployment
Release notes
- Bugfix: Some speedials were not configured properly on VX500 and VVX600
- Bugfix: Bad language used by the authenticator (M12724)
- Bugfix: Some CRM contact were not provided by the SOP API (M12964)
- Bugfix: Some prompt were sometimes played in English instead of the requested language (M13400)
- Bugfix: Audio grammar was not correct for Dutch (M13377)
- Bugfix: Voicemail email notification was not translated in Italian, Spanish and German (M13401)
- Bugfix: voicemail message was not attached to the email notification (M13401)
- Bugfix: Email notification for faxes were not translated (M13458)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart Communication Server |
| Restart Application Management Server |
Changed components
Show changed componentsHide changed components
New module versions
- Cluster & SOP Active-Active Support
SOP API
- SOP API v.4.12.2 Show release notesHide release notes
- Bugfix: Filtering on source, would return empty result (M12964) - link
- Bugfix: Call history was not set to UTC (M13309) - link
- Bugfix: Restore backward compatibility on lang parameter of dbGetProfileParametersLayout (M0)
Communication Server
- Communication Server v.3.11.0 Show release notesHide release notes
- Feature: Support REFER on own callid (M12936)
- Feature: New application SIPMute (M12935)
- Improvement: Never expose internal DNS aliases in outgoing requests (M13244)
- Improvement: Refresh MWI subscription on DNS update (M13374)
- Bugfix: RTP port exhaustion (M13145)
- Bugfix: MWI was using DNS even when not needed (M13180)
- Bugfix: Voice grammar in Dutch was incorrect (M13377)
- Bugfix: Externnotify was always activated (M13401)
Sounds
- Sounds v.1.10.1 Show release notesHide release notes
- Bugfix: added missing prompt 'hour' in nl_BE and nl_NL (M13377)
- Bugfix: Fix incorrectly named files which could cause some prompts to be played in english (M13400)
FAX Server
- FAX Server v.2.4.1 Show release notesHide release notes
- Bugfix: email notifications for faxes are not sent in the user's language (M13458)
- Deprecated: The apply-sop-change was not working properly (M0)
New resource versions
No new resource versions.
New action versions
- STARTDYNAMICAPPLICATION.8.4.1
Included components
Modules
Resources
Actions
Version 4.2.0 - Early deployment
Release notes
- Feature: Added translation of the profile parameters for fr, nl, de, it and es languages (M12458)
- Feature: Added new sounds with support for fr_BE, fr_FR, nl_BE, nl_NL, de_DE, it_IT, es_ES, en_GB (M12788)
- Feature: Added support for regional languages for the Polycom phones (M12720)
- Feature: Added support es, it, and de languages in the Fax-to-Email notification (M12862)
- Feature: Voicemail to email must take into account the user's language (M11574)
- Feature: Added support for SPA112 and SPA8000 with T38 support (M13065)
- Feature: Added support for the Polycom VVX1500 (M12696)
- Improvement: Idle page refresh time was too low for the Polycom IP331 (M12877)
- Improvement: Upgraded several module in order to have at least what Fusion 3.4 version (M12245)
- Bugfix: It was not possible to sync translation catalog with regional language (M13109)
- Bugfix: Grammar to say the time in French and in Spanish was incorrect (M13054)
- Bugfix: Speedials and BLF were not taken into account by the Polycom resources (M12842)
- Bugfix: Profile parameters were not taken into account when evaluating ETL on the SOP (M12581) (M12845)
- Bugfix: Forward to alternative number in Out Of Office status impossible (M13068)
- Bugfix: Forward to the mobile number was not working (M12864)
- Bugfix: Display name of an external call was showing the name of the called instead of the caller (M12864)
- Bugfix: Removed the possibility to configure Sangoma BRI or PRI which are not supported on Fusion 4 (M13066)
- Bugfix: Mails are now dropped if no postmaster is registered (M12842)
- Bugfix: Status softkey on teh Polycom VVX phones was not working (M13018)
- Bugfix: "Template-User" callflow fails when generating the personal menu prompt (M12396)
- Bugfix: Parameters were not filtered according to the defined user's role (M12843)
- Bugfix: The timezone defined on the SOP configuration was not taken into account on the Polycom phones (M12868)
- Bugfix: Click-to-dial was not working when dialing a number starting with '+' (M11571)
- Bugfix: Subscription to the presence was not working (M12849)
- Bugfix: Voicemail deposit was not working (M12800)
- Bugfix: The language of the phone did not take into account the user's language (M12469)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart Communication Server |
| Restart Application Management Server |
Changed components
Show changed componentsHide changed components
New module versions
- Unified Communication Model
- Unified Communication Model v.1.12.0 Show release notesHide release notes
- Bugfix: External contact synchronization failed when one of the extension fields was NULL (M11393)
- Bugfix: Some password could result in invalid login (M0)
- Improvement: Evenly spread the load for recurrently scheduled tasks (M8018)
- Deprecated: Profile synchronization was not completely switched off (M18546)
Database Schema
- Database Schema v.2.7.1 Show release notesHide release notes
- Bugfix: The total allowable size for "labels" is not limited anymore to 255 characters (M12550)
- Bugfix: Language in the translation catalog was truncated when defined regional language (M13109)
Database Schema v.2.7.0 (intermediate version) Show release notesHide release notes
- Improvement: Use correct encoding for instant messaging (M12334)
Database Schema v.2.6.0 (intermediate version) Show release notesHide release notes
- Feature: Support of HASH profile parameters (M11613)
- Improvement: Increase e_mail and email size (M10727)
Database Schema v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Split instant inbox into multiple tables (M11185)
- Feature: Allow to archive instant messages (M11193)
Database Schema v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Link user feedback to internal bugtracker (M10490)
- Bugfix: Increase attribute column size to 64 in attribute_state and attribute_log(M10714)
Database Schema v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Increase attribute column size to 64 in attribute_state and attribute_log(M10714)
Mail Server
Mail Server v.1.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Drop emails if no postmaster is specified in the configuration (M10966 & M11695) - link
- Deprecated: Issues found with exim and postmaster redirection to /dev/null (see v1.5.3) (M0)
SOP API
SOP API v.4.12.0 (intermediate version) Show release notesHide release notes
- Feature: Support of HASH parameters (M11613) - link
- Bugfix: Only select phones resources dbGetPhoneStatus (M11186) - link
- Bugfix: exten2 and context2 made optional in ccPark (M11552) - link
- Bugfix: ccOriginate doesn't accept + (M11571) - link
VMXML
Polycom Phone Support
System Base
- System Base v.1.9.0 Show release notesHide release notes
- Improvement: Added irqbalance daemon to spread interrupts across available CPU's (M12781)
- Bugfix: SOP based template processor did not work with new profile parameters (M12845)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
FAX Server
- FAX Server v.2.4.0 Show release notesHide release notes
- Feature: Included translations for Spanish, French, Dutch, Italian and German. (M0012862)
- Deprecated: The apply-sop-change was not working properly (M0)
FAX Server v.2.3.2 (intermediate version) Show release notesHide release notes
- Bugfix: Add additional supported content types for PDF files for email to fax - backport (M13793)
- Bugfix: Allow disabling the body of the message - backport (M13807)
FAX Server v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Apply extension change could render en empty FaxDispatch file (M11314)
Sounds
Sounds v.1.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: Prompts are not removed at module reinstall/upgrade (M9938)
Sounds v.1.9.0 (intermediate version) Show release notesHide release notes
- Feature: Added the possibility to synchronize custom prompts from the SMP to the SOP (M9807)
- Deprecated: Custom prompts were removed in some cases when the module was reinstalled
Communication Server
- Communication Server v.3.10.0 Show release notesHide release notes
- Feature: DTMF based transfer can now send REFER on original call (M12492)
- Bugfix: Syntax to say time was incorrect in French and in Spanish (M13054)
Communication Server v.3.9.0 (intermediate version) Show release notesHide release notes
- Feature: adding response to EC ping on websocket (M12824)
- Improvement: Use better From header in Endpoint Abstraction register (M12859)
- Bugfix: Always keep retrying MWI subscription (M12491)
Communication Server v.3.8.0 (intermediate version) Show release notesHide release notes
- Feature: Custom internal DNS entry (M12728)
- Improvement: Threadpool options are now configurable (M11201)
- Improvement: Support incoming SIP REFER from Lync (M12617)
- Improvement: Re-register on DNS update (M12745)
- Bugfix: Realtime peers using WebSocket were unreachable after reload (M12574)
- Bugfix: Make notification on VoicemailMenu deactivable (M12601)
- Bugfix: Not able to record voicemail (M12800)
Communication Server v.3.7.0 (intermediate version) Show release notesHide release notes
- Feature: Multi-threaded task processors for messaging and presence (M11195)
- Feature: Make RTP binding address configurable, per peer (M12369)
- Feature: Limit size of message queue (M11201)
- Feature: New HINT_WATCHERS function (M11904)
- Improvement: Use correct encoding for instant messaging (M12334)
- Improvement: React on first watcher of a hint (M12395)
- Bugfix: Base64-encoded presence data was truncated (M12398)(M12526)
- Bugfix: FMU sync process could fail to run completely (M12627)
- Bugfix: Restore the old pincode prompt when joining a conference call (M11684)
- Bugfix: ICE could fail because of too many candidates
- Bugfix: Try to avoid hanging WebSocket connections
Communication Server v.3.6.3 (intermediate version) Show release notesHide release notes
- Lock JLO validation Proximus FIA
- Feature: Possibility to force the peer port when the host is a DNS name (M13754) - link
Communication Server v.3.6.2 (intermediate version) Show release notesHide release notes
- Bugfix: MWI was using DNS even when not needed (backport) (M13180)
Communication Server v.3.6.1 (intermediate version) Show release notesHide release notes
- Feature: DTMF based transfer can now send REFER on original call (backport) (M12492)
- Bugfix: Always keep retrying MWI subscription (backport) (M12491)
Communication Server v.3.6.0 (intermediate version) Show release notesHide release notes
- Feature: Add Google Cloud Messaging support to XMPP module (M11450)
- Feature: Subscribe to Message Waiting Indicator in EPA (M11156)
- Feature: Support dynamic EPA registration (M11071)
- Feature: New JSON presence format (M11901)
- Improvement: Remove realtime priority by default, reducing load peaks (M11182)
- Improvement: Added user=phone in From PAI, RPID and Diversion headers (M11422)
- Improvement: Make http session limit configurable (M11175)
- Improvement: Parse contact URI arguments (M10528)
- Improvement: All the allowed codecs are now proposed in the reinvite so that the remote peer should always accept the SDP (M11604)
- Improvement: Expose mailbox information in MWI notify callflow (M11969)
- Improvement: Support out-of-order notify matching an outstanding subscription (M11822)
- Improvement: Subscribe action offers more options and reports status (M12121)
- Improvement: Prevent remote bridge when both end does not negotiate the same capabilities (M11793)
- Bugfix: Received REINVITE with new codec were not propagated (M10416)
- Bugfix: Blind transfers were not logged properly in queue_log (M10886)
- Bugfix: PAI should only provide SIP URI format in output (M11245)
- Bugfix: Avoid duplicating MWI subscriptions on reload (M11156)
- Bugfix: Domain in the PAI for COLP were incorrect (M11245)
- Bugfix: Authorization header could be corrupted (M11005)
- Bugfix: Upstream fixes for DTLS and messages (M11335)
- Bugfix: Diversion reason lost (M11245)
- Limitation: iLBC support has been deprecated. G.729 is recommended for low bandwidth environments
- Bugfix: Support dynamic nature of address whatever the ss7 prefix configuration (M11804)
Communication Server v.3.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Make RTP binding address configurable (backport) (M12369)
- Bugfix: Update DTLS crypto to fix incoming calls in Firefox 39+ (M11873)
Communication Server v.3.5.1 (intermediate version) Show release notesHide release notes
- Improvement: Make http session limit configurable (M11175)
- Bugfix: Upstream fixes for DTLS and messages (M11335)
Communication Server v.3.5.0 (intermediate version) Show release notesHide release notes
- Feature: New upstream version (M9933)
- Feature: Support registering on multiple PBX using Abstracted Endpoint 2 (M10273)
- Feature: Added the voicemail volume gain parameter (M9914)
- Feature: Add xmpp configuration (M10373)
- Improvement: Add privacy in diversion header (M10216)
- Improvement: Added the possibility to only trust the PAI header (M10158)
- Improvement: Specific certificates for DTLS-SRTP (M9931)
- Improvement: Added request URI when pushing NOTIFY to the callflow (M10458)
- Improvement: Log microseconds (M10443)
- Improvement: Update ICE stack (M10936)
- Bugfix: Upgrade libssl (M10052)
- Bugfix: It was not possible to transfer video call using dynamic payload such as H264 (M8954)
- Bugfix: Don't start asterisk when sipsocket fails to bind (M9934)
- Bugfix: Video not working when dual ring of phone with video support and another one without (M9919)
- Bugfix: No new WebSocket connection would sometimes be accepted (M9877)
- Bugfix: Process could crash when detecting fax tone (M10100)
- Bugfix: Recurrent crash during DTLS handshake (M10104)
- Bugfix: IAXVARS could make asterisk crash (M10064)
- Bugfix: When receiving an 480 SIP message the dialstatus variable is in congestion (M10443)
- Bugfix: Audio issue when REINVITE with specific codec is rejected by remote (M10416)
Communication Server v.3.4.7 (intermediate version) Show release notesHide release notes
- Bugfix: Memory leak when error on outgoing MWI subscription (backport) (M16288)
- Deprecated: Asterisk could crash in case of an attended transfer (M20164)
Communication Server v.3.4.6 (intermediate version) Show release notesHide release notes
- Bugfix: Encode uri of "refer-to" field during the transfer (M15563)
- Bugfix: Set the connected line and the peer IP in "refer-to" field during the transfer (M15563)
- Deprecated: Asterisk could crash in case of an attended transfer (M20164)
Communication Server v.3.4.5 (intermediate version) Show release notesHide release notes
- Feature: Early Media Suppression (backport) (M13756)
- Deprecated: Asterisk could crash in case of an attended transfer (M20164)
Communication Server v.3.4.4 (intermediate version) Show release notesHide release notes
- Improvement: Never expose internal DNS aliases in outgoing registrations (backport) (M13244)
- Bugfix: The SIPTRANSFER_REFERER variable did not contain the complete refer-by header (backport) (M13750)
- Deprecated: Asterisk could crash in case of an attended transfer (M20164)
Communication Server v.3.4.3 (intermediate version) Show release notesHide release notes
- Feature: Subscribe to Message Waiting Indicator in EPA (M12076 Backport) (M11156)
- Feature: Custom internal DNS entry (M12728 Backport)
- Improvement: Reregister on DNS update (M12745 Backport)
- Improvement: Support out-of-order notify matching an outstanding subscription (M12076 Backport) (M11822)
- Improvement: Support incoming SIP REFER from Lync (M12617 Backport)
- Bugfix: FMU synchronization mechanism was not always working (M12627 Backport)
- Bugfix: Crash during the notify contact parsing (M12939)
Communication Server v.3.4.2 (intermediate version) Show release notesHide release notes
- Improvement: Added user=phone in From PAI, RPID and Diversion headers (Backport M11422)
- Bugfix: Incorrect domain in COLP PAI (Backport M11245)
- Bugfix: PAI should only provide sip uri format in output (Backport M11245)
- Bugfix: Diversion reason lost (Backport M11245)
- Bugfix: Avoid duplicating MWI subscriptions on reload (Backport M11156)
Communication Server v.3.4.1 (intermediate version) Show release notesHide release notes
- Feature: Support registering on multiple PBX using Abstracted Endpoint 2 (Backport M10273) (M10488)
- Improvement: Added the possibility to only trust the PAI header (Backport M10158)
- Improvement: Add privacy in diversion header(M10216)
- Improvement: Add the possibility to define maximum number of calls (M10477)
- Bugfix: Authorization header could be corrupted (M11005)
Communication Server v.3.4.0 (intermediate version) Show release notesHide release notes
- Improvement: Added the possibility to configure the outbound registration timeout (M9699)
- Improvement: Added the ability to modify SIP retransmission timers (M9720)
- Bugfix: When using the custom transfer via the ' *' the called was able to trigger the transfer (M9705)
- Bugfix: SIP trunks using sipsocket and qualify could stay stuck in unreachable mode (M9888)
- Bugfix: When receiving a maddr address we should not resolve the sent-by host in the via header (M9806)
- Bugfix: Deactivate defense daemon when switching to standby mode (M9721)
- Feature: Expanded support of message content-types when outside context of a call (M9875)
Communication Server v.3.3.15 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed destination number on TRANSFER event in queue log (M19497)
- Bugfix: Blind transfers were not logged properly in queue_log (M10886)
Communication Server v.3.3.14 (intermediate version) Show release notesHide release notes
- Improvement: In case of ringall ring directly member when they get available (M18271)
Communication Server v.3.3.13 (intermediate version) Show release notesHide release notes
- Bugfix: REINVITE with codec rordering were not propagated (backport) (M17405)
Communication Server v.3.3.12 (intermediate version) Show release notesHide release notes
- Bugfix: Prevent SDP-version-ignore in case of codec re-negotiation (Backport) (M15994)
Communication Server v.3.3.11 (intermediate version) Show release notesHide release notes
- Feature: Support of custom CDR fields on ODBC (backport) (M13662)
- Bugfix: Coredumps were not generated in some cases (M13582)
Communication Server v.3.3.10 (intermediate version) Show release notesHide release notes
- Bugfix: Reload was needed to apply linear queue strategy (Backport M13530)
- Bugfix: When remote end sends a reinvite to change the codec, transcoding was not reinitialized (Backport M13624)
- Bugfix: When remote end answers to a reinvite with several codecs, the channel codec was not the first codec proposed in the SDP (Backport M13624)
Communication Server v.3.3.9 (intermediate version) Show release notesHide release notes
- Bugfix: recvonly was missing in the SDP of the SIP trunk when a sendonly was received (M13299)
- Bugfix: When remote end answers with several codecs many reinvite was sent (M13624)
- Bugfix: Maxcalls was not configurable (M13620)
Communication Server v.3.3.8 (intermediate version) Show release notesHide release notes
- Bugfix: SIP stack blocked when remote end answers a reinvite with several codecs (Backport M13343)
New resource versions
Cisco SPA112
PolycomIP331
PolycomIP331 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP331 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP331 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP331 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP331 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP331 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP331 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP331 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP331 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406)
PolycomIP331 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP331 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150)
- Feature: Allow to set a fifth softkey on every VVX (M22965)
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
- Improvement: Allow to adjust screen saver settings for every VVX (M23139)
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22965)
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
- Bugfix: No voice after unhold when srtp is enable for IP series phones (M22965)
PolycomIP650
PolycomIP650 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP650 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP650 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP650 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP650 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP650 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP650 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP650 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185)
PolycomIP650 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406)
PolycomIP650 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350)
PolycomIP650 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150)
- Feature: Allow to set a fifth softkey on every VVX (M22569)
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140)
- Improvement: Allow to adjust screen saver settings for every VVX (M23139)
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569)
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980)
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695)
PolycomVVX500
PolycomVVX500 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547)
PolycomVVX1500
PolycomVVX310
PolycomVVX310 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547)
PolycomVVX400
PolycomVVX400 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547)
PolycomVVX300
PolycomVVX300 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547)
PolycomVVX410
PolycomVVX410 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547)
PolycomVVX600
PolycomVVX600 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547)
SIP Trunk
New action versions
- STARTDYNAMICAPPLICATION.8.4
- STARTDYNAMICAPPLICATION.8.4 v.1.0.0 Show release notesHide release notes
- Bugfix: Stop using deprecated app, restoring compatibility with CS 3.5+ (M11467)
- Improvement: User language support for Voicemail (M11574)
Included components
Modules
Resources
Actions
Version 4.1.0 - Deprecated
Release notes
- Feature: The external CallerID is now always reformatted in +E164 (M12219)
- Feature: When dialing a national service number, the site of the caller's phone is used to know the local country and route the call to the country's SOP (M12215)
- Feature: The 'Outside line access code' is now configurable. It was always hardcoded to 0 (M12217)
- Feature: When dialing an emergency number, the site of the caller's phone is used in order to route the call to the country's SOP and add the site prefix to the called number (M12212)
- Feature: When calling from an internal phone a DDI of the cluster, the call is automatically redirected to the associated internal extension (M12222)
- Feature: The call restriction is now configurable per extension and not per device (M11231)
- Feature: The dialplan associated with each call restriction (Mobile, premium, international, etc.) is now configurable per SOP (M12223)
- Feature: The DSCP is configurable per SOP and taken into account by the Communication Server and the Polycom phones (M12319)
- Feature: Added feature codes to be able to manage call forward (M12282)
- Feature: Added feature codes for zeroconf, call waiting toggle (M12346)
- Improvement: Renamed 'My groups' by 'My Queues' in the user's profile (M12210)
- Improvement: Aligned the version of the actions used in the different callflows (M12247)
- Bugfix: Internal calls were not working when calling an FMU end point from a call group (M12719)
- Bugfix: License defined in the profile were not correct (M12705)
- Bugfix: PUM login was failing (M12799)
- Bugfix: it was not possible to record the customer prompts via the Recorder (M12316)
- Bugfix: Concatenation of the extension with the feature code (e.g. ##01) was not working (M12482)
- Bugfix: Campon, blind transfer, directed park were not working on net.Console (M12266)
- Bugfix: The SIP presence was not updated when changing the intentional status of an extension (M12523)
- Bugfix: Video support was enabled by default in the communication server (M12309)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
| Action |
| Restart Communication Server |
| Restart Application Management Server |
Changed components
Show changed componentsHide changed components
New module versions
- Unified End Point Support
Communication Server
- Communication Server v.3.3.7 Show release notesHide release notes
- Bugfix: Restored the old pincode prompt when joining a conference call - Backport (M11684)
- Deprecated: SIP stack blocked when remote end answers a reinvite with several codecs (M13343)
System Base
- System Base v.1.8.2 Show release notesHide release notes
- Bugfix: DB sync could failed when syncing parameter values (M12762)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
System Base v.1.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Included libtest-requires-perl dependency for libtest-sharedfork-perl (M0)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
System Base v.1.8.0 (intermediate version) Show release notesHide release notes
- Feature: Provide better password management through a tool (M11517)
- Bugfix: Fixed CVE-2014-0224 and CVE-2015-1793
- Deprecated: Adds an obsolete public key to the SOP (M16229)
System Base v.1.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: SSL/TLS weak MAC algorithms disabled (M11658)
- Bugfix: SSL/TLS server CBC mode ciphers disabled (M11658)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
System Base v.1.7.0 (intermediate version) Show release notesHide release notes
- Feature: Support for SHA-2 when using STARTTLS (M11519)
- Bugfix: Upgraded OpenSSL to the latest version (M11273)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
System Base v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Dynamic start of ssh connection (M9996)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
New resource versions
ReportFax
net.Console X900
net.Console X700
Generic SIP phone
ReportQDR
- ReportQDR v.1.8.0 Show release notesHide release notes
- Feature: Added QueueAccountCode column (M10885)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Unified End Point SIP peer
ReportCDR
- ReportCDR v.2.13.3 Show release notesHide release notes
- Feature: Allow to add pagebreaks after each group in summary report (M0012326)
- Deprecated: Missmach between report with comma and dot separated values (M15842)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 4.0.0 - Deprecated
Release notes
- Feature: Loudspeaker-Group (M5714)
- Feature: Module parameters in ETL (M11122)
- Feature: Card support (M11117)
- Feature: Modules updated (M11098)
- Feature: Timezone configurable in ETL (M11108)
- Feature: Some probes were not relevant for vsops (M11109)
- Feature: Add fax server (M11118)
- Feature: Support for G729 (M11116)
- Dependency:
- SMP Application v5.4 or higher
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
- Sangoma Card Support
- Sangoma Card Support v.2.10.0 Show release notesHide release notes
- Feature: Upgrade to Netborder 4.4.7, wanpipe drivers 7.0.11.4 and A10X firmware v40. Post installation : Check and apply the card's firmware update if needed (M9332)
- Improvement: Added the possibility to flash new firmware on the cards (M9332)
Escaux Connect
Escaux Connect v.2.6.3 (intermediate version) Show release notesHide release notes
- Improvement: implementing feature sets and tags with module escaux connect 2.6.3 (M10557) - link
Escaux Connect v.2.6.2 (intermediate version) Show release notesHide release notes
- Bugfix: Do not clear the search value when using "back" button (M10312) - link
- Bugfix: Check that the "call device" adds a 0 for external numbers (M10314) - link
- Bugfix: Incorrect SIP URI shown in newly opened chat (M10315) - link
- Bugfix: Categorized WebRTC self-test feedbacks (M10316) - link
- Bugfix: Some calls do not appear in Call History (M10317) - link
- Bugfix: Contact details button is now disable when relevant (M10318) - link
- Bugfix: Play ringtone locally when needed (M10322) - link
- Bugfix: Show a desktop notification when receiving a call (M10323) - link
- Bugfix: Improve visual differentiation between contact types (M10325) - link
- Bugfix: Display more relevant search results first (M10327) - link
- Bugfix: Optimize directory speed when no input is entered (M10329) - link
- Bugfix: Silent Mode notification was not displayed correctly (M10410) - link
- Bugfix: Avoid accidental call pickup by the user while typing text (M10414) - link
- Bugfix: Normalize phone number when trying to match to a contact (M10438) - link
- Bugfix: Allow only one outgoing call (M10461) - link
- Bugfix: Not redirected to a random page after a call (M10321) - link
- Improvement: Prevent closing the page when a call is still ongoing (M10467) - link
Escaux Connect v.2.6.1 (intermediate version) Show release notesHide release notes
- Features: Lots of new features for net.Desktop replacement (M9508) - link
- Improvement: Added collaboration capability to chat (for camera & screen sharing) (M9871) - link
- Bugfix: Reduced amount of subscriptions generated (M9937) - link
- Bugfix: Various stability improvements (M10004) - link
- Bugfix: default values could be incorrect when upgrading from a previous version and new options are available. (M10261) - link
Escaux Connect v.2.6.0 (intermediate version) Show release notesHide release notes
- Improvement: New implementation of directory module using the card dav protocol (M9677) - link
- Improvement: New implementation of chat module (M9827) - link
- Improvement: Integration of Escaux Connect Companion (M9733) - link
Escaux Connect v.2.5.16 (intermediate version) Show release notesHide release notes
- Bugfix: case-sensitive issue with voicemail field (FMG-1072)
Escaux Connect v.2.5.15 (intermediate version) Show release notesHide release notes
- Improvement: Support national number format on login (FMG-958)
- Bugfix: Issue on first configuration (FMG-958)
Escaux Connect v.2.5.14 (intermediate version) Show release notesHide release notes
- Improvement: Add app on android home screen (FMG-958)
- Improvement: Enlarge hamburger menu (FMG-864)
- Bugfix: Issue to customize main button (FMG-0)
Escaux Connect v.2.5.13 (intermediate version) Show release notesHide release notes
- Feature: Support enumstring profile parameter component (FMG-809)
Escaux Connect v.2.5.12 (intermediate version) Show release notesHide release notes
- Feature: Status permissions levels (M20013) - link
- Feature: Profile parameters shortcuts in the dashboard (M20014) - link
- Feature: Custom status icon (M20440) - link
New resource versions
SangomaBRI
- SangomaBRI v.2.4.0 Show release notesHide release notes
- Feature: Allow to set a default callerid in case a regular expression is not matched (M8655)
- Bugfix: Overlap Dialing without DNIS was causing the call to be hangup (M8417)
- Improvement: Add DTMF Mode option (M9166)
SangomaPRI
- SangomaPRI v.2.4.0 Show release notesHide release notes
- Feature: Allow to set a default callerid in case a regular expression is not matched (M8655) - link
- Bugfix: Overlap Dialing without DNIS was causing the call to be hangup (M8417) - link
- Bugfix: The clir flag was not transmitted to the Communication Server
- Improvement: Add DTMF Mode option (M9166) - link
Escaux Connect SIP peer
Abstracted Endpoint
PolycomVVX500
PolycomVVX500 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
- Improvement: Add video jitter buffer variables. (M11547)
PolycomVVX600
PolycomVVX600 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
- Improvement: Add video jitter buffer variables. (M11547)
PolycomIP330
- PolycomIP330 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
PolycomIP550
- PolycomIP550 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
PolycomIP670
- PolycomIP670 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
PolycomIP560
- PolycomIP560 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
PolycomIP450
- PolycomIP450 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
PolycomVVX310
PolycomVVX310 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
- Improvement: Add video jitter buffer variables. (M11547)
PolycomVVX400
PolycomVVX400 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
- Improvement: Add video jitter buffer variables. (M11547)
PolycomVVX300
PolycomVVX300 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
- Improvement: Add video jitter buffer variables. (M11547)
PolycomVVX410
PolycomVVX410 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735)
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709)
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514)
- Improvement: Add video jitter buffer variables. (M11547)
New action versions
- STARTDYNAMICAPPLICATION.8.3
Included components
Modules
Resources
Actions
Version 3.11.2 - Early deployment Restricted release!
Release notes
- Bugfix: Upgrade TFTP server module to have correct permissions on config files(TS-2154)
- Bugfix: Login failed when pincode is stored in an admin var (PC-4294)
- Bugfix: Upgraded Unified End Point Support module (M0013985) - link
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
- Unified End Point Support
TFTP Server
PUM
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.11.1 - Early deployment Restricted release!
Release notes
- Bugfix: PUM module upgraded (M23936) - link
- Bugfix: TFTP Server Module upgraded (M23936) - link
- Bugfix: Updated callflow *143
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
PUM v.3.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Use pincode defined in profile params (M19274) - link
TFTP Server
TFTP Server v.3.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: Don't give write access to all users (M4235) - link
- Bugfix: Reload TFTP instead of restarting it (PC-581)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.11.0 - Early deployment Restricted release!
Release notes
- Improvement: Support for baseline 4 guest installations. (M0)
- Improvement: Reset Password mail internationalization (M12029) - link
- Improvement: Generate missing languages (M12487) - link
- Improvement: Removed dependency with safetynet (M21023) - link
- Bugfix: Use firmware version for VVX350 aligned with other Polycoms (PC-2382)
- Bugfix: Upgrading apache on baseline 2 to fix CVE-2011-319 which could crash it (M17647) - link
- Bugfix: Ensure escaux-devices-api does not overload SOP API. (PC-3329)
- Bugfix: Rsync daemon sometimes did not restart properly (PC-581)
- Bugfix: Upgraded escaux-asterisk-lib to match SOP API (TS-3810)
- Bugfix: Installation of the module took a very long time when no address was configured on eth1 and/or eth2 and DNS servers take a long time to respond (M0)
- Bugfix: The SMP connections were not reset properly after the network reconfiguration, causing a long reconnection time (M14596) - link
- Bugfix: LDAP synchronization 1.4.0 was not importing DDIs any more (M20763) - link
- Bugfix: Deactivate 3DES ciphers for SIP TLS (TS-7941)
- Bugfix: Phone status incorrect because incorrect startup dependency (M21758) - link
- Feature: New driver SDSA for ATA 191 allowing reconfigure from FMA (PC-2820)
- Feature: Upgraded Gigaset N510 firmware to v258 (PC-1765)
- Feature: Upgraded Gigaset N720 firmware to v116 (PC-1765)
- Feature: Updated CA following change on Orange's side (MCH-1197)
Special manual upgrade actions
| Action |
| Apply Changes |
| Restart CS |
| Restart all Polycom phones |
| Restart all Cisco ATA 191 resources |
| Restart all Gigaset N510 and N720 base stations |
| In case SDS-resources (Cisco SPA112,SPA8000,ATA191) are used, the SIP password field cannot be empty anymore inside the resource |
Changed components
Show changed componentsHide changed components
New module versions
Network
- Network v.2.0.2 Show release notesHide release notes
- Bugfix: Installation of the module took a very long time when no address was configured on eth1 and/or eth2 and DNS servers take a long time to respond (M0)
- Bugfix: The SMP connections were not reset properly after the network reconfiguration, causing a long reconnection time (M14596) - link
Network v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Static host entries were removed when the Network module was installed
Network v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Deprecated: Static host entries were removed when Network module was installed
Network v.1.24.1 (intermediate version) Show release notesHide release notes
- Bugfix: Static host entries were removed when the Network module was installed
Network v.1.24.0 (intermediate version) Show release notesHide release notes
- Feature: Added 4 new routes (M15495) - link
Network v.1.23.2 (intermediate version) Show release notesHide release notes
- Bugfix: The SMP connection were not reset properly after teh network reconfiguration, causing a long reconnection time (M14596) - link
Network v.1.23.0 (intermediate version) Show release notesHide release notes
- Feature: Missing IP aliases parameter for eth2 (M9960) - link
Web Server
LDAP Synchronization
LDAP Synchronization v.1.14.0 (intermediate version) Show release notesHide release notes
- Feature: Expose the definition of LDAP attribute to determine the user role for FUSION 4 (M12721) - link
- Feature: Added the ability to define primary and secondary phone (M18517) - link
- Deprecated: LDAP synchronization 1.4.0 was not importing DDIs any more (M20763) - link
LDAP Synchronization v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Support LDAP redundancy in LDAP module (M14430) - link
LDAP Synchronization v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added the ability to configure ldap paged size (M12109) - link
- Bugfix: Fixed fax number synchronization (M12290) - link
- Bugfix: Fixed issue caused by leading and trailing spaces in configuration values (M12197) - link
FAX Server
FAX Server v.2.6.1 (intermediate version) Show release notesHide release notes
- Bugfix: Caller ID was not always present in email's subject (M16958) - link
Unified Communication Model
System Base
System Base v.2.6.3 (intermediate version) Show release notesHide release notes
- Bugfix: Don't install irqbalance daemon by default (PC-538)
System Base v.2.6.2 (intermediate version) Show release notesHide release notes
- Bugfix: Uninstall unused packages if they are installed (FMG-30)
System Base v.2.6.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to change a dynamic provide by another one (M24076) - link
- Bugfix: Fixed errors generated by escaux-base during the apply changes (M24850) - link
System Base v.2.6.0 (intermediate version) Show release notesHide release notes
- Feature: Reliable sopsync when profile parameter change (M22067) - link
- Improvement: Avoid forking processes every minute when verifying connection to the SMP (M23110) - link
- Bugfix: Remove duplicate package escaux-evaluate (M22617) - link
- Bugfix: Restored CGIRPC required by PUM and Cluster Sync (M23654) - link
System Base v.2.5.3 (intermediate version) Show release notesHide release notes
- Feature: Support monitoring of core dumps (MCH-29)
System Base v.2.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Could not publish SSH public key from CLI (M21889) - link
System Base v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: allow to reread configuration files by daemon processes. (M17451) - link
System Base v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Don't install minutely cron helper (M19502) - link
System Base v.2.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: SSH connection - Be more tolerant against network failures (M18135) - link
- Bugfix: SSH connection - Try authentication with ECDSA and DSA key
- Bugfix: Cluster synchronization broke prompt symlinks (M18867) - link
- Improvement: Remove unused daemon process that caused memory issues (M19120) - link
- Feature: Added local tasks support (M18513) - link
System Base v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove unused packages causing network to restart slowly
- Deprecated: Unused daemon process was causing high memory usage (M19120) - link
System Base v.2.3.0 (intermediate version) Show release notesHide release notes
- Bugfix: Coredumps appeared on the VSOP host filesystem instead of the VSOP filesystem (M16350) - link
- Bugfix: Apply changes could remove configuration in some rare cases (M16800) - link
- Bugfix: Remove obsolete public key (M16229) - link
- Feature: Generate more complex passwords (M16373) - link
- Deprecated: Unused daemon process was causing high memory usage (M19120) - link
System Base v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Add mission version from packages (M0)
- Bugfix: Restored the package escaux-evaluate (M0)
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Resource cleanup tool (M14313) - link
- Improvement: Added the ability to rotate logs file hourly (M13315) - link
- Bugfix: Coredumps were not generated in some cases (M13582) - link
- Bugfix: When doing rollback the configuration files were not restored (M14238) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Connection to the SMP could be lost when the module was downgraded to a version before 1.6.0 (M14760) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Provide hooks when the SSH connection is starting or stopped (M12594) - link
- Deprecated: Connection to the SMP could be lost when the module was downgraded to a version before 1.6.0 (M14760) - link
System Base v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Improvement: Move password generation to software sources module (M0)
- Improvement: Move escaux-evaluate package to SOP Base module (M0)
- Bugfix: Configuration management tool was not able to set a "0" value (M0)
- Bugfix: There was a memory leak in the SMP connection daemon (M13481) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
Gigaset Phone Support
- Gigaset Phone Support v.1.5.0 Show release notesHide release notes
- Feature: Upgraded Gigaset N510 firmware to v258 (PC-1765)
- Feature: Upgraded Gigaset N720 firmware to v116 (PC-1765)
Gigaset Phone Support v.1.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix uninitialized vars in postsync script (PC-3919)
Gigaset Phone Support v.1.4.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for N870 base stations (M23222) - link
Gigaset Phone Support v.1.3.0 (intermediate version) Show release notesHide release notes
- Bugfix: Upgraded Gigaset N720 IP PRO firmware to v113 (M23641) - link
Gigaset Phone Support v.1.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Set limit to 30 for Gigaset N720 Sat (M23057) - link
Gigaset Phone Support v.1.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed file permissions (M4235) - link
- Bugfix: Fixed order entries for Gigaset N720 IP/SAT and Gigaset (M23057) - link
- Bugfix: Removed unused configuration files (M23058) - link
- Bugfix: Disabled access code for VoIP lines (M23100) - link
- Improvement: Deactivated call forward on Gigaset N720 DM PRO (M20377) - link
Gigaset Phone Support v.1.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: False positive message (M0)
- Feature: Reboot support for Gigaset N510 IP PRO and Gigaset N720 DM PRO (M20496) - link
- Improvement: Activated LDAP directory (M20373) - link
- Improvement: Activated mailbox (M20374) - link
- Improvement: Suppressed Voip wizard (M20376) - link
Software sources
SMS API
SMS API v.3.0.5 (intermediate version) Show release notesHide release notes
- Bugfix: libssl1.0.0-compatible SHA-1 fingerprint for DigiCert CA (M24890) - link
SMS API v.3.0.4 (intermediate version) Show release notesHide release notes
- Bugfix: SMS Status "ErrorCode = XX" was not correctly parsed (M22954) - link
SMS API v.3.0.3 (intermediate version) Show release notesHide release notes
- Bugfix: Add Digicert CA G2 to baseline2 CA database (M20631) - link
Polycom Phone Support
Polycom Phone Support v.5.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support for VVX350 (PC-2382)
- Bugfix: Fix VVX-150 interface for Status softkey feature (PC-2727)
Polycom Phone Support v.5.16.1 (intermediate version) Show release notesHide release notes
- Bugfix: Case sensitivity issue would cause phone configuration to be removed from /tftpboot (TS-3476)
Polycom Phone Support v.5.16.0 (intermediate version) Show release notesHide release notes
- Feature: Ensure virtual phone gets reloaded if parameters.json changes (PC-874)
- Bugfix: Status was not always correctly displayed on VVX (PC-1063)
Polycom Phone Support v.5.15.3 (intermediate version) Show release notesHide release notes
- Improvement: IP networks allowed to access internal provisioning are now configurable (PC-2796)
Polycom Phone Support v.5.15.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fix sudoers permissions on upgrade (TS-1499)
Polycom Phone Support v.5.15.1 (intermediate version) Show release notesHide release notes
- Bugfix: Wrong sudoers permissions (TS-1499)
- Deprecated: Breaks sudo (TS-1499)
Polycom Phone Support v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
- Deprecated: Breaks sudo (TS-1499)
Polycom Phone Support v.5.13.6 (intermediate version) Show release notesHide release notes
- Feature: Added support for Polycom Trio 8500 (PC-347)
- Feature: Added support for Polycom VVX 150 (PC-539)
Polycom Phone Support v.5.13.5 (intermediate version) Show release notesHide release notes
- Improvement: Added support for VVX 250 & 450 (M25185) - link
Polycom Phone Support v.5.13.4 (intermediate version) Show release notesHide release notes
- Bugfix: Local Admin password not set correctly on SOP (M24266) - link
- Bugfix: Phone reboot from SMP was not working (M24266) - link
Polycom Phone Support v.5.13.3 (intermediate version) Show release notesHide release notes
- Improvement: make sure updated phone are properly rebooted (M23915) - link
- Improvement: updated polycom-drivers.deb version (M23915) - link
Polycom Phone Support v.5.13.2 (intermediate version) Show release notesHide release notes
- Bugfix: Bump VVX firmware from 5.9.1 to 5.9.2 (M23502) - link
- Bugfix: USB port warning displayed when using PoE (M23502) - link
- Bugfix: Wrong call log dates with some NTP servers (M23502) - link
Cisco ATA Support
Cisco ATA Support v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: Upgraded firmware of ATA191 to 11.1SR4 (PC-1701)
- Improvement: Optimized package size (PC-1701)
- Bugfix: ATA 191 failed to provision (PC-1701)
- Bugfix: Support provisioning from internet (PC-1769)
Cisco ATA Support v.2.2.1 (intermediate version) Show release notesHide release notes
- Feature: Added support for Cisco ATA 191 (PC-482)
- Bugfix: Old version of package escaux-sipura was installed
Cisco ATA Support v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for Cisco ATA 191 (PC-482)
- Deprecated: Main feature not working
Cisco ATA Support v.2.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Firmware upgrade support (PC-60)
- Improvement: Custom CA support (M23764) - link
Cisco ATA Support v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Creating a service shouldn't try to set APL domain (M23881) - link
Cisco ATA Support v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support central provisioning (M21451) - link
- Feature: Support HTTP provisioning (M16267) - link
- Improvement: Converted to APT
SOP Base
SOP Base v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Create /escaux/etc/resource (PC-2937)
SOP Base v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: SMP Lua Support (PC-837)
- Improvement: Load phone source in driver (PC-837)
SOP Base v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Don't restart xinetd (PC-581)
SOP Base v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: HTTP AMI support (PC-314)
SOP Base v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Ensure phone configuration reload after HA switch (M22617) - link
- Feature: Added phone reset command (M22982) - link
SOP Base v.2.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Remove dependency on watchdog and safetynet (M19656) - link
SOP Base v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M12365) - link
- Improvement: Moved all web related packages in Web Server module. (M12772) - link
- Improvement: Added escaux-evaluate package from System Base module (M0)
- Bugfix: Add missing dependencies (M14560) - link
SOP Base v.1.9.2 (intermediate version) Show release notesHide release notes
- Bugfix: Compatibility issue with Web Server module (M0)
Unified End Point Support
Unified End Point Support v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Return an error when API is being used during an apply changes (TS-4047)
Unified End Point Support v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Update version of nodejs
Unified End Point Support v.2.3.3 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure escaux-devices-api is started at boot (PC-524)
Unified End Point Support v.2.3.2 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure registered phones are not removed at apply changes (M0)
Unified End Point Support v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Improve performance during apply changes. Better usage of cache (M0)
Unified End Point Support v.2.3.0 (intermediate version) Show release notesHide release notes
- Bugfix: Allow primary or secondary phone to be used as phone on UEP. (M21822) - link
Unified End Point Support v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Support SVE phones (M0)
Unified End Point Support v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Support phone on UEP (M20403) - link
Communication Server
Communication Server v.3.41.0 (intermediate version) Show release notesHide release notes
- Feature: Distributed device state using SIP (PC-2600)
- Improvement: Initialize distributed device state cluster (CM-939)
- Improvement: Exclude peer from distributed device state (CM-939)
Communication Server v.3.40.0 (intermediate version) Show release notesHide release notes
- Feature: Prometheus metrics support (PC-2707)
- Improvement: astdb error count exported (PC-2836)
- Improvement: astdb reliability upgrade (PC-3071)
- Improvement: Increased kill timeout (PC-3071)
- Improvement: Possible to force stop subscriptions (PC-2839)
- Bugfix: Crash in send_provisional_keepalive (PC-3150)
- Bugfix: Strict sip peer identification based on callbackextension (TS-4396)
Communication Server v.3.39.9 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.39.8 (intermediate version) Show release notesHide release notes
- Bugfix: SIP session refresh could timeout too early when the refresh time was too low (FMG-1773)
Communication Server v.3.39.7 (intermediate version) Show release notesHide release notes
- Improvement: Include voicemail config generated by FMA (PC-3927)
Communication Server v.3.39.6 (intermediate version) Show release notesHide release notes
- Bugfix: Strict sip peer identification based on callbackextension (FMG-1068)
Communication Server v.3.39.5 (intermediate version) Show release notesHide release notes
- Bugfix: Some astdb corruption was not detected (PC-2838)
Communication Server v.3.39.4 (intermediate version) Show release notesHide release notes
- Improvement: Make sip auto domain configurable (FMG-813)
- Improvement: Support of Swyx transfer (FMG-813)
Communication Server v.3.39.3 (intermediate version) Show release notesHide release notes
- Improvement: Prometheus exporter for defence (PC-2690)
Communication Server v.3.39.2 (intermediate version) Show release notesHide release notes
- Bugfix: Logger memory leak (PC-2538)
- Bugfix: Multiple refer transfer leak (PC-2538)
- Bugfix: Queue set member leak (PC-2538)
- Bugfix: Manager HTTP connection leak (PC-2538)
- Bugfix: Postinst breaks new installations (PC-1763)
Communication Server v.3.39.0 (intermediate version) Show release notesHide release notes
- Improvement: Detect CPU time allocated to vSOP (PC-1763)
- Improvement: Call back extension set on SIP INVITE contact header (FMG-792)
- Bugfix: Callflows using LOCK could sometimes run in parallel (FMG-896)
- Deprecated: New installations fail
Communication Server v.3.38.1 (intermediate version) Show release notesHide release notes
- Improvement: Configurable SIP UDP send buffer (TS-2862)
- Bugfix: Force update of libcorosync4
- Bugfix: Update of libjansson was depending on dahdi
Communication Server v.3.38.0 (intermediate version) Show release notesHide release notes
- Improvement: Update to latest corosync flatiron (TS-2568)
- Bugfix: Avoid blocking after corosync daemon restart (TS-2568)
- Deprecated: Install only works on Fusion
Communication Server v.3.37.8 (intermediate version) Show release notesHide release notes
- Improvement: Allow the possibility to process error in response of OPTIONS (FMG-1647)
Communication Server v.3.37.7 (intermediate version) Show release notesHide release notes
- Improvement: Allow to no load modules (FMG-745)
Communication Server v.3.37.6 (intermediate version) Show release notesHide release notes
- Bugfix: func_lock - Under contention it becomes possible that multiple channels will be told they successfully obtained the lock (FMG-896)
Communication Server v.3.37.5 (intermediate version) Show release notesHide release notes
- Bugfix: REFER may contain broken authentication header (FMG-483)
- Bugfix: Allow standard length domain resolution in chan_sip (PC-1770)
Communication Server v.3.37.4 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in SIP redirect (TS-2509)
Communication Server v.3.37.3 (intermediate version) Show release notesHide release notes
- Bugfix: Callflow hooks without channels locking (PC-1612)
Communication Server v.3.37.2 (intermediate version) Show release notesHide release notes
- Improvement: Callflow hooks without channels locking (PC-1612)
- Bugfix: Filtered events should not wake manager sessions (PC-1193) (TS-1565)
Communication Server v.3.37.1 (intermediate version) Show release notesHide release notes
- Improvement: External voicemail notification reports more information (PC-1325)
Communication Server v.3.37.0 (intermediate version) Show release notesHide release notes
- Feature: Custom from user for subscriptions (PC-839)
- Improvement: Filtering out event categories from manager (PC-1193)
- Improvement: Dropping dialplan events by default (PC-1193)
- Improvement: Presence job filter without channels locking (PC-1427)
Communication Server v.3.36.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove global video codec (TS-1145)
- Bugfix: Allow directrtpsetup when Dial option U and M are used (FMG-357)
Communication Server v.3.36.0 (intermediate version) Show release notesHide release notes
- Improvement: RTP bind address follows SIP TLS (PC-832)
- Improvement: Better support of privacy header (FMG-335)
- Bugfix: Crash on transfer with no header parameters (FMG-335) (TS-1214)
Communication Server v.3.35.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade libastphonenumber asterisk function (FMG-251)
- Improvement: Support short code checks on libastphonenumber (FMG-272)
- Improvement: Shared last call wrapup time between queues (PC-786)
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Bugfix: Semicolon issue on contact header (TS-395)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.3 (intermediate version) Show release notesHide release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.2 (intermediate version) Show release notesHide release notes
- Improvement: Expose "ignoresdpversion" asterisk option (FMG-254)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.1 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect semicolon on transfer contact header (TS-395)
- Bugfix: External voicemail notify script would reset permissions (PC-652)
- Bugfix: Avoid manager event on RTCP read (TS-513)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
- Deprecated: crash on transfer with no header parameters (TS-1214)
Communication Server v.3.34.0 (intermediate version) Show release notesHide release notes
- Improvement: res_json now based on libjansson to fix memory leak (PC-460)
- Improvement: libsrtp upgrade for SRTP stability (PC-692)
- Bugfix: Leak in AMI presence state reader (PC-737)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.33.1 (intermediate version) Show release notesHide release notes
- Bugfix: Duplicate presence job filter could deadlock on slow nodes (PC-667)
- Bugfix: Timestamps not played back correctly (TS-295)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.33.0 (intermediate version) Show release notesHide release notes
- Feature: Distributed device state (PC-210)
- Feature: AMI HTTP support (PC-314)
- Improvement: Increased AMI HTTP POST size (PC-314)
- Improvement: Forward SIP redirect URI parameters (FMG-118)
- Bugfix: Memory leak on PIDF NOTIFY parsing (TS-18)
- Bugfix: Crash in stringfields management (TS-12)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.32.0 (intermediate version) Show release notesHide release notes
- Feature: New channels and uptime SOP CLI commands (M24628) - link
- Feature: Create SIP peers using AMI (M25225) - link
- Feature: Create SIP outbound registrations using AMI (M25226) - link
- Improvement: Ensure SIPMute never blocks for too long (M25131) - link
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.31.3 (intermediate version) Show release notesHide release notes
- Improvement: RTP bind address follows SIP TLS (backport)(PC-832)
Communication Server v.3.31.2 (intermediate version) Show release notesHide release notes
- Bugfix: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.31.1 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in stringfields management (backport) (TS-12)
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.31.0 (intermediate version) Show release notesHide release notes
- Feature: Force outgoing subscriptions refresh (M24751) - link
- Improvement: Filter duplicate presence callflow runs (M21224) - link
- Improvement: Activated extension pickup (M19406) - link
- Improvement: Check database integrity before startup (M24855) - link
- Improvement: Handle SQL escape character in dialplan function (M24367) - link
- Improvement: Don't respawn the process on normal exit status (M25017) - link
- Improvement: Set global flag of newly created endpoint abstraction resources (M25176) - link
- Bugfix: Exit when SIP TLS binding fails (M24590) - link
- Bugfix: Fix dependencies required by process-voicemail (M25021) - link
- Bugfix: Play date/time announcement in voicemail (M23149) - link
- Bugfix: Firewall support for TCP SIP (M24404) - link
- Bugfix: Crash in app_queue null CDR (M24750) - link
- Deprecated: asterisk persistent memory lost after asterisk crash (TS-689)
Communication Server v.3.30.3 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in stringfields management (backport) (TS-12)
Communication Server v.3.30.2 (intermediate version) Show release notesHide release notes
- Bugfix: Crash in app_queue ring_entry under load (M24750) - link
Communication Server v.3.30.1 (intermediate version) Show release notesHide release notes
- Bugfix: Date/time announcement was not played in voicemail (M23149) - link
- Bugfix: Open firewall TCP connection on port 5060 (M24404) - link
Communication Server v.3.30.0 (intermediate version) Show release notesHide release notes
- Feature: Set presence from manager (M24128) - link
Communication Server v.3.29.1 (intermediate version) Show release notesHide release notes
- Bugfix: Memory tracking was left activated (M23927) - link
Communication Server v.3.29.0 (intermediate version) Show release notesHide release notes
- Feature: Default channel timeout (M22735) - link
- Feature: Unlimited custom HTTP headers from dialplan HASH (M23267) - link
- Improvement: Update libastphonenumber library (M23774) - link
- Bugfix: ringall and all agents busy does not raise the selected penalty (M22177) - link
- Bugfix: Possible deadlock during REFER (M23467) - link
- Deprecated: Memory tracking was left activated (M23927) - link
Communication Server v.3.28.1 (intermediate version) Show release notesHide release notes
- Improvement: Don't install regflag manager module when configuration is not set (M23395) - link
- Bugfix: Packaging issue (M23395) - link
Communication Server v.3.28.0 (intermediate version) Show release notesHide release notes
- Feature: Migrate MWI NOTIFY to callflow hook (M23255) - link
- Improvement: Support libSS7 version 2 (M16321) - link
- Improvement: Reliably sync the profile status and the register flag (M22644) - link
- Deprecated: Installation issue (M23395) - link
Communication Server v.3.27.3 (intermediate version) Show release notesHide release notes
- Bugfix: Allow SayUnixTime to say date only (M22653) - link
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (M2925) - link
- Bugfix: Reference leak on failed transfer prevents RTP port clearing (M23001) - link
- Bugfix: Remove odbc idle check causing crashes (M17872) - link
Communication Server v.3.27.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fix crash on MWI subscription start or stop after DNS update (M22408) - link
Communication Server v.3.27.1 (intermediate version) Show release notesHide release notes
- Bugfix: Preferred device causing queue to only call that one device until timeout (M22267) - link
- Bugfix: Avoid locking during quick SIPMute use (M22474) - link
- Improvement: Add SIPMute manager command for easier synchronous use (M22474) - link
Communication Server v.3.27.0 (intermediate version) Show release notesHide release notes
- Feature: Escaux presence format v2 (M21131) - link
- Feature: Make available more queue results in variables (M20710) - link
- Feature: Dual use of pidf and epresence JSON on the same extension (M21131) - link
- Bugfix: Abnormal circuit reset in case of in/out ISUP message collision (M21737) - link
- Bugfix: Deadlock on SS7 ACM reception (M22046) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Voxtron and net.Buzz extended presence support removed (M21131) - link
Communication Server v.3.26.0 (intermediate version) Show release notesHide release notes
- Improvement: Callflow after apply changes reload can now run for a longer time (M21408) - link
- Improvement: Added included directory for sip notify configuration (M17423) - link
- Improvement: Disable the defence during dialplan reload (M21518) - link
- Bugfix: Deadlock on SS7 call (M21370) - link
Communication Server v.3.25.0 (intermediate version) Show release notesHide release notes
- Feature: Added function MEMBER_QUEUE_LIST (M19859) - link
- Improvement: New commands to debug and monitor SIP subscriptions (M21115) - link
- Improvement: More hint and presencestate details shown (M21115) - link
- Improvement: Deactivate getpresence callflow during dialplan reload (M20411) - link
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Notify body could contain trailing line feed characters (M21114) - link
- Bugfix: Correctly forward return code from threadpool/taskprocessor (M21115) - link
- Bugfix: Do not outdate presencestate cache on first and last watcher (M21115) - link
- Bugfix: Avoid crash during the Escaux CDR driver load (M21124) - link
Communication Server v.3.24.0 (intermediate version) Show release notesHide release notes
- Feature: Added QUEUE_RAISE_PENALTY feature (M21060) - link
- Feature: Rules for ringall is now taken into account without expiry of the queue timeout (M21060) - link
- Bugfix: When parallel_retry was configured, higher penalty were also ringing (M21060) - link
Communication Server v.3.23.0 (intermediate version) Show release notesHide release notes
- Feature: Configurable bind addresses for SIP (M20536) - link
- Feature: Control of the sending of the 181 SIP message (M19306) - link
- Bugfix: Segfault when using NUM_INFO without all required arguments (M19846) - link
- Bugfix: JsonAdd/Set behavior on existing objects (M17879) - link
Communication Server v.3.22.5 (intermediate version) Show release notesHide release notes
- Feature: New channels and uptime SOP CLI commands (backport) (M24628) (M25422) - link
Communication Server v.3.22.4 (intermediate version) Show release notesHide release notes
- Bugfix: Possible deadlock during REFER (backport) (M23467) - link
Communication Server v.3.22.3 (intermediate version) Show release notesHide release notes
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (backport) (M2925) - link
Communication Server v.3.22.2 (intermediate version) Show release notesHide release notes
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Fix crash on MWI subscription start or stop after DNS update (backport) (M22408) - link
- Bugfix: JsonAdd/Set behavior on existing objects (M17879) - link
Communication Server v.3.22.0 (intermediate version) Show release notesHide release notes
- Feature: Add library to format numbers (M15207) - link
- Feature: Synchronous REFER support (M16351) - link
- Bugfix: Fixed destination number on TRANSFER event in queue log (M19497) - link
Communication Server v.3.21.1 (intermediate version) Show release notesHide release notes
- Bugfix: res_json was leaking 2 bytes of return code (M17755) - link
Communication Server v.3.21.0 (intermediate version) Show release notesHide release notes
- Improvement: Allow "force mode" on Escaux CDR driver (M18714) - link
- Improvement: Remove defence daemon dependency on safetynet (M19502) - link
- Bugfix: Sometimes fails to start automatically on a new install (M19534) - link
- Bugfix: Outbound registrations were deactivated by default (M19154) - link
- Bugfix: AutoMute could prevent channel deletion (M19621) - link
- Bugfix: Correct version of libss7 (M19615) - link
Communication Server v.3.20.0 (intermediate version) Show release notesHide release notes
- Feature: Allow other packages to include dialplan configuration (M18096) - link
- Bugfix: Permissions on spool directory needed a second install to be correct (M19267) - link
- Bugfix: Incorrect digest response in the Proxy-Authentication header of the REFER message (M19412) - link
Communication Server v.3.19.2 (intermediate version) Show release notesHide release notes
- Bugfix: Permissions on spool directory needed a second install to be correct (backport) (M19267) - link
Communication Server v.3.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Removed leftover ~dev in package version
Communication Server v.3.19.0 (intermediate version) Show release notesHide release notes
- Feature: SS7 - Open media on ACM (M18205) - link
- Feature: SS7 - Make Called Party Status Indicator configurable (M18205) - link
- Feature: Add Escaux CDR driver (M18701) - link
- Improvement: Debconf system more reliable (M17929) - link
- Improvement: In ringall strategy ring members as soon as they are available (M18271) - link
- Improvement: Make voicemail-cleanup configurable (M18090) - link
- Improvement: Support custom HTTP methods in func_curl (M18044) - link
- Bugfix: Expires of a Subscribe response was ignored (M18825) - link
- Deprecated: Not installable because of leftover ~dev
Communication Server v.3.18.4 (intermediate version) Show release notesHide release notes
- Bugfix: res_json was leaking 2 bytes of return code (backport) (M17755) - link
Communication Server v.3.18.3 (intermediate version) Show release notesHide release notes
- Bugfix: Expires of a Subscribe response was ignored (M18825) - link
Communication Server v.3.18.2 (intermediate version) Show release notesHide release notes
- Bugfix: Music On Hold were not reloaded during apply-change (M18461) - link
- Improvement: Make voicemail-cleanup configurable (M18090) - link
Communication Server v.3.18.1 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure installation on clean machine works (M17929) - link
- Bugfix: Fix permissions on sudoers file (M18245) - link
Communication Server v.3.18.0 (intermediate version) Show release notesHide release notes
- Feature: Launch callflow after apply changes (M17007) - link
- Feature: New commands in SOP CLI (M14976) - link
- Improvement: EndPointAbstraction do not register at creation (M17007) - link
- Improvement: Added Connected Line Update in Intrude application (M17901) - link
- Bugfix: Protect against potential crashes in res_json (M17879) - link
- Deprecated: Installation on clean machine fails (M17929) - link
Communication Server v.3.17.2 (intermediate version) Show release notesHide release notes
- Bugfix: Restore 180 forwading behavior when early media suppression is disabled (backport) (M2925) - link
Communication Server v.3.17.1 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure installation on clean machine works (M17929) - link
Communication Server v.3.17.0 (intermediate version) Show release notesHide release notes
- Feature: SIP peer-specific RTP port range (M16702) - link
- Improvement: Continuous log rotation (M12330) - link
- Improvement: Review mapping ISUP cause - SIP error (M17466) - link
- Improvement: Make virtual extensions and presence state timeout configurable (M17545) - link
- Bugfix: RTP ports were not freed after connectivity loss while ringing (M17516) - link
- Bugfix: REINVITE with codec rordering were not propagated (M17405) - link
- Bugfix: SIP message body starting with spaces could be lost (M15422) - link
- Bugfix: Restored automatic start on first installation (M12330) - link
- Deprecated: Installation on clean machine fails (M17929) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Start/Stop and process monitoring changed - see admin guide (M12330) - link
Communication Server v.3.16.0 (intermediate version) Show release notesHide release notes
- Feature: Install packages using apt (M16491) - link
- Improvement: Define multiple range of CICS (M17043) - link
- Improvement: Debconf template format support
- Improvement: Immediate restart after crash (M17031) - link
- Bugfix: Avoid safetynet false positive (M17031) - link
- Bugfix: Conf bridge announcements not played in the user's language (M16253) - link
- Bugfix: T38 was only working on eth0 (M16616) - link
- Bugfix: Process crashed in case of ccOriginate API call (M16768) - link
- Bugfix: Custom unavailable minivm greeting was never played (M16855) - link
- Bugfix: The recorded name was not used when the option skip fallback was used (M16855) - link
- Bugfix: Correctly authenticate outgoing instant messages (M17348) - link
- Bugfix: Crash when handling codec's payloads (M16969) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: SMP and template must have apt support (M16491) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: Start/Stop and process monitoring changed - see admin guide (M17031) - link
- Deprecated: Better upgrade process in 3.17.0 (M17031) - link
New resource versions
- ReportQDR
- ReportQDR v.1.8.1 Show release notesHide release notes
- Bugfix: Would not generate 'Combined and Summary reports' if 'Summarized by...' has no value selected. (M11401) - link
- Bugfix: Character encoding issue for html output report (M12622) - link
- Bugfix: Column "Agent device owner" was missing in Combined and Summary reports (M17006) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
- ReportQDR v.1.8.0 (intermediate version) Show release notesHide release notes
- Feature: Added QueueAccountCode column (M10885) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
ReportQDR v.1.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: Added ORDER BY for combined reports (T10165011)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SIP Trunk
SIP Trunk v.2.3.0 (intermediate version) Show release notesHide release notes
- Improvement: Support progress in-band per peer (M15139) - link
- Improvement: Number of call saved in configuration file for the new probe (M13970) - link
SIP Trunk v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: G.722 support (M12725) - link
- Improvement: Improve support of Caller ID method (M13191) - link
Aastra 622d
Aastra 632d
Cisco SPA8000
Cisco SPA8000 v.1.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow space in dialplan (M20272) - link
GigasetN510IP
SyncCDRDB
- SyncCDRDB v.2.5.2 Show release notesHide release notes
- Bugfix: incorrect soprep was used to detect callflows (M25309) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: CDR of calls to extension looking like a callflows id were dropped (Backport) (M23230) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.5.0 (intermediate version) Show release notesHide release notes
- Bugfix: Some call could have two CDRs (M19908) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.4.3 (intermediate version) Show release notesHide release notes
- Bugfix: Disposition was not always correct (M18722) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.4.2 (intermediate version) Show release notesHide release notes
- Bugfix: Filter escauccapi calls out of reports
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Remove comment from sync code(M0)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: Caller number change was not taken into account (M13837) - link
- Feature: Add custom CDR fields "usertag" and "usernote" (M13662) - link
- Deprecated: Broken sync code (M0)
Cisco SPA112
Cisco SPA112 v.1.18.0 (intermediate version) Show release notesHide release notes
- Feature: Centralized provisioning (M21451) - link
- Improvement: Add RTP range ID (M21483) - link
- Improvement: Removed default SIP password and made it configurable (M21483) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: SIP password field is now required, empty value not allowed (M21483) - link
Cisco SPA112 v.1.17.2 (intermediate version) Show release notesHide release notes
- Bugfix: ToS default values were incorrect (M21105) - link
Cisco SPA112 v.1.17.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow space in dialplan (M20272) - link
Cisco SPA112 v.1.17.0 (intermediate version) Show release notesHide release notes
- Feature: Support Calls over Internet (M16268) - link
Polycom Virtual Phone
Polycom Virtual Phone v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
Polycom Virtual Phone v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Default password was always used (M0)
Polycom Virtual Phone v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to set a fifth softkey (M20555) - link
- Feature: Allow to disable redundant transfer softkey (M20555) - link
ReportCDR_Q
ReportCDR_Q v.1.6.0 (intermediate version) Show release notesHide release notes
- Improvement: show duration in minutes (M25421) - link
- Improvement: GrandTotal added for CDR_Q (M20284) - link
ReportCDR_Q v.1.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Display the original called number. (M20719) - link
- Improvement: Implemented additional set of filters. (M21611) - link
- Improvement: Allow not operator "!" in filters (M20005) - link
ReportCDR_Q v.1.4.1 (intermediate version) Show release notesHide release notes
- M19774: don't send report when empty - link
ReportCDR_Q v.1.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: Character encoding issue for html output report (M12622) - link
- Bugfix: Fixed missing events when the "last agent device owner" is empty (M20644) - link
- Improvement: Added NOMEMBER result in summary/combined report (M20581) - link
PolycomVVX150
PolycomVVX250
PolycomVVX350
PolycomVVX450
PhoneZeroConf
PhoneZeroConf v.2.3.2 (intermediate version) Show release notesHide release notes
- Bugfix: Task crashed when /var/tmp/ip-mac.log or /var/tmp/ip-mac.log.1 was missing (M23271) - link
PhoneZeroConf v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Write separate config outside of gen_extensions (M19660) - link
PhoneZeroConf v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: Support zeroconf for HTTP based Polycom provisioning (M19078) - link
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.10.7 - Deprecated Restricted release!
Release notes
- Improvement: allow custom ringing time for CallQueuer profile (PC-981)
- Deprecated: Not used in RL, shifting versions (M0)
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- LDAP Synchronization
- LDAP Synchronization v.1.14.0 Show release notesHide release notes
- Feature: Expose the definition of LDAP attribute to determine the user role for FUSION 4 (M12721) - link
- Feature: Added the ability to define primary and secondary phone (M18517) - link
- Deprecated: LDAP synchronization 1.4.0 was not importing DDIs any more (M20763) - link
- LDAP Synchronization v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Support LDAP redundancy in LDAP module (M14430) - link
LDAP Synchronization v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added the ability to configure ldap paged size (M12109) - link
- Bugfix: Fixed fax number synchronization (M12290) - link
- Bugfix: Fixed issue caused by leading and trailing spaces in configuration values (M12197) - link
New resource versions
- SyncLDAP
- SyncLDAP v.1.9.1 (intermediate version) Show release notesHide release notes
- Improvement: Display owner of extension that is modified (M8804) - link
- Deprecated: Accidental debug caused out-of-memory (M0)
SyncLDAP v.1.9 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters get garbled(M00000) - link
SyncLDAP v.1.8 (intermediate version) Show release notesHide release notes
- Bugfix: Corrected the visual bug of the report when 'Delete Policy' set to never
SyncLDAP v.1.7 (intermediate version) Show release notesHide release notes
- Feature: Added option 'Delete Policy' (M0004505) - link
- Deprecated: Visual bug in the report
SyncLDAP v.1.6 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters not properly displayed in debug output report (M0004461) - link
SyncLDAP v.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: users with non-ascii characters in their name are always reported as being updated
SyncLDAP v.1.4 (intermediate version) Show release notesHide release notes
- bugfix: updates in user attributes not synced
SyncLDAP v.1.3 (intermediate version) Show release notesHide release notes
- Improvement: Improved report
- Improvement: Catch errors if record already exists on SMP with source not LDAP
- Feature: Dry-run mode
- Improvement: Improved detection of HA mode
SyncLDAP v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: minor corrections
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.10.6 - Early deployment Restricted release!
Release notes
- Improvement: Add Local Admin Password module (M21635) - link
- Bugfix: update Polycom Firmware to 4.0.14 for SPIP and 5.9.1 for VVX (M22966) - link
- Bugfix: when no codec are defined on Gigaset, default codec is not chosen (M21729) - link
- Bugfix: The number of static members in a Queue were limited to 40 (M21661) - link
- Bugfix: Remove Gigaset Support Module v 1.2.0 and backport to 1.1.2 (M21730) - link
- Bugfix: Disable DND on Polycom 560 doesn't work when you login with PUM (M20283) - link
- Bugfix: Language not taken in to account in some Polycom phones (M18161) - link
- Bugfix: Detection UEP/FMU not working (M22463) - link
- Bugfix: short code fusion 3 not working when FMU corportate (M22501) - link
- Bugfix: No probe log when SyncDBRDB's clean option is ON and the probe never changed state for the past 3 years(M9058) - link
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- LDAP Synchronization
- LDAP Synchronization v.1.14.0 Show release notesHide release notes
- Feature: Expose the definition of LDAP attribute to determine the user role for FUSION 4 (M12721) - link
- Feature: Added the ability to define primary and secondary phone (M18517) - link
- Deprecated: LDAP synchronization 1.4.0 was not importing DDIs any more (M20763) - link
- LDAP Synchronization v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Support LDAP redundancy in LDAP module (M14430) - link
LDAP Synchronization v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added the ability to configure ldap paged size (M12109) - link
- Bugfix: Fixed fax number synchronization (M12290) - link
- Bugfix: Fixed issue caused by leading and trailing spaces in configuration values (M12197) - link
Polycom Phone Support
Polycom Phone Support v.5.13.0 (intermediate version) Show release notesHide release notes
- Feature: Upgraded FW to 4.0.14 for SPIP and 5.9.1 for VVX (M22966) - link
Polycom Phone Support v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade firmware for internet support on all remaining SPIP (330,450,550,560,670) (M23140) - link
- Feature: Added phone reset command (M22982) - link
- Improvement: Use crypt password for authentication (M22401) - link
- Bugfix: Local directory download was restricted when using firmware upgrade schedule (M22314) - link
- Deprecated: Intermediate release never used in production; higher version to be used instead (M0)
Polycom Phone Support v.5.11.1 (intermediate version) Show release notesHide release notes
- Bugfix: PUM login and logout were failing (M22254) - link
Polycom Phone Support v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to disable LLDP (M21839) - link
- Deprecated: PUM login and logout were failing (M22254) - link
Polycom Phone Support v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Auto-reload of the configuration in case of configuration changes (M17423) - link
- Bugfix: Configuration reload when using SIPTLS was not working (M17423) - link
- Deprecated: PUM login and logout were failing (M22254) - link
Polycom Phone Support v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade firmware for SPIP 670, 650 and 335 on Internet (M20669) - link
Polycom Phone Support v.5.8.1 (intermediate version) Show release notesHide release notes
- Improvement: Increased the number of ringtone available via the alert-info header (M15829) - link
Polycom Phone Support v.5.8.0 (intermediate version) Show release notesHide release notes
- Feature: Added ability to limit simultaneous downloads (M18512) - link
- Feature: Added support of zeroconf when HTTP provisioning is used (M19078) - link
New resource versions
- SyncCDRDB
- SyncCDRDB v.2.3.2 Show release notesHide release notes
- Bugfix: Fix false error when doing apply change (M0)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
- SyncCDRDB v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Caller number change was not taken into account (M13837) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: Add queueaccountcode to the related queue. (M10885) - link
- Bugfix: Missing information on blind transfer in qdr (M10885) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: sync fails with substr outside of string error (TS-333)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncLDAP
SyncLDAP v.1.9.1 (intermediate version) Show release notesHide release notes
- Improvement: Display owner of extension that is modified (M8804) - link
- Deprecated: Accidental debug caused out-of-memory (M0)
SyncLDAP v.1.9 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters get garbled(M00000) - link
SyncLDAP v.1.8 (intermediate version) Show release notesHide release notes
- Bugfix: Corrected the visual bug of the report when 'Delete Policy' set to never
SyncLDAP v.1.7 (intermediate version) Show release notesHide release notes
- Feature: Added option 'Delete Policy' (M0004505) - link
- Deprecated: Visual bug in the report
SyncLDAP v.1.6 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters not properly displayed in debug output report (M0004461) - link
SyncLDAP v.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: users with non-ascii characters in their name are always reported as being updated
SyncLDAP v.1.4 (intermediate version) Show release notesHide release notes
- bugfix: updates in user attributes not synced
SyncLDAP v.1.3 (intermediate version) Show release notesHide release notes
- Improvement: Improved report
- Improvement: Catch errors if record already exists on SMP with source not LDAP
- Feature: Dry-run mode
- Improvement: Improved detection of HA mode
SyncLDAP v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: minor corrections
Polycom Virtual Phone
Polycom Virtual Phone v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to set a fifth softkey (M20555) - link
- Feature: Allow to disable redundant transfer softkey (M20555) - link
PolycomIP6000
PolycomIP6000 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomIP6000 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP6000 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP650
PolycomIP650 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomIP650 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP650 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP331
PolycomIP331 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomIP331 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP331 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomIP7000
PolycomIP7000 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomIP7000 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP7000 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX500
PolycomVVX500 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX500 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX500 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX1500
PolycomVVX1500 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX1500 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX1500 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX310
PolycomVVX310 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX310 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX310 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX400
PolycomVVX400 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX400 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX400 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX300
PolycomVVX300 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX300 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX300 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX410
PolycomVVX410 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX410 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX410 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX600
PolycomVVX600 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX600 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX600 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX101
PolycomVVX101 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX101 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX101 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX201
PolycomVVX201 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX201 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX201 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX401
PolycomVVX401 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX401 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX401 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX411
PolycomVVX411 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX411 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX411 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX311
PolycomVVX311 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX311 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX311 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
PolycomVVX601
PolycomVVX601 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX601 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX501
PolycomVVX501 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX501 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX301
PolycomVVX301 v.5.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support IP650 and IP335 on internet (M20669) - link
PolycomVVX301 v.5.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Phone language selection only worked when global setting was selected (M19001) - link
- Improvement: Support IP6000 over Internet (M16844) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX301 v.5.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Code alignment (M0)
Queue
PolycomTrio8500
PolycomVVX150
PolycomVVX250
PolycomVVX450
PolycomVVX350
New action versions
Included components
Modules
Resources
Actions
Version 3.10.5 - Early deployment Restricted release!
Release notes
- Improvement: Support the Gigaset Pro Series as a replacement solution for the Snom M9 (M21113) - link
Special manual upgrade actions
| Action |
| Update the SIP trunk towards the UEP to version 2.4.0 (if used) |
| Set Subscribe Context = default in SIP Trunk to UEP |
| Apply Changes |
Changed components
Show changed componentsHide changed components
New module versions
- LDAP Synchronization
- LDAP Synchronization v.1.14.0 Show release notesHide release notes
- Feature: Expose the definition of LDAP attribute to determine the user role for FUSION 4 (M12721) - link
- Feature: Added the ability to define primary and secondary phone (M18517) - link
- Deprecated: LDAP synchronization 1.4.0 was not importing DDIs any more (M20763) - link
- LDAP Synchronization v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Support LDAP redundancy in LDAP module (M14430) - link
LDAP Synchronization v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added the ability to configure ldap paged size (M12109) - link
- Bugfix: Fixed fax number synchronization (M12290) - link
- Bugfix: Fixed issue caused by leading and trailing spaces in configuration values (M12197) - link
Gigaset Phone Support
- Gigaset Phone Support v.1.2.0 Show release notesHide release notes
- Bugfix: False positive message (M0)
- Feature: Reboot support for Gigaset N510 IP PRO and Gigaset N720 DM PRO (M20496) - link
- Improvement: Activated LDAP directory (M20373) - link
- Improvement: Activated mailbox (M20374) - link
- Improvement: Suppressed Voip wizard (M20376) - link
Gigaset Phone Support v.1.1.1 Show release notesHide release notes
- Improvement: Added support for new satellite resource SDG4 (M19158) - link
- Improvement: Upgraded firmware version to lastest v108 (M19158) - link
New resource versions
- SyncLDAP
- SyncLDAP v.1.9.1 (intermediate version) Show release notesHide release notes
- Improvement: Display owner of extension that is modified (M8804) - link
- Deprecated: Accidental debug caused out-of-memory (M0)
SyncLDAP v.1.9 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters get garbled(M00000) - link
SyncLDAP v.1.8 (intermediate version) Show release notesHide release notes
- Bugfix: Corrected the visual bug of the report when 'Delete Policy' set to never
SyncLDAP v.1.7 (intermediate version) Show release notesHide release notes
- Feature: Added option 'Delete Policy' (M0004505) - link
- Deprecated: Visual bug in the report
SyncLDAP v.1.6 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters not properly displayed in debug output report (M0004461) - link
SyncLDAP v.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: users with non-ascii characters in their name are always reported as being updated
SyncLDAP v.1.4 (intermediate version) Show release notesHide release notes
- bugfix: updates in user attributes not synced
SyncLDAP v.1.3 (intermediate version) Show release notesHide release notes
- Improvement: Improved report
- Improvement: Catch errors if record already exists on SMP with source not LDAP
- Feature: Dry-run mode
- Improvement: Improved detection of HA mode
SyncLDAP v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: minor corrections
GigasetN510IP
GigasetN510IP v.1.0.1 Show release notesHide release notes
- Bugfix: No default codec when none selected (M16455) - link
- Improvement: Ability to define the handset order to avoid unexpected extension change on the same physical device (M16455) - link
GigasetN720IP
GigasetN720SAT
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.10.4 - Early deployment
Release notes
- Improvement: add Report FMU/UEP (M0)
- Bugfix: ssh connections are now restored correctly (M18315)
- Bugfix: outgoing calls towards an invalid number creates hanging calls in Mserver (M18823)
- Bugfix: voicemail now working in IVr profile (M19979)
- Bugfix: Language is now working in IVR profile (M19578)
- Bugfix: voicemail can be listen inside netConsole (M19038)
- Bugfix: restriction unique MAC address for resource SDX6 (M19673)
- Bugfix: remove consolekit (M19120)
- Bugfix: DHCP server support specific vendor (M18199)
- Bugfix: Locked profiles use now correct variables (M19945)
- Bugfix: fix license for profile Calendar (M0)
- Bugfix: in phone status, Thomson appears now on the correct SOP (M20250)
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
net.Supervisor
- net.Supervisor v.1.6.0 Show release notesHide release notes
- Feature: Added parsing of QUEUEACCOUNTCODE event from queue_log (M10885)
- Improvement: Menu buttons and queue selection combobox moved to the top of the interface in order to display big queue names (M9270)
- Bugfix: Fixed issue related to transfer time count as waiting time (M10541)
SOP Base
SOP Base v.1.9.0 (intermediate version) Show release notesHide release notes
- Improvement: Daemonized updatephone.php & push_phone.pl (M9887)
- Deprecated: Missing dependencies (M14560)
SOP Base v.1.8.5 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed dependency issue when using baseline 2.6 (M23979)
- Bugfix: There was compatibility issue with the WebServer module (M23979)
Watchdog
- Watchdog v.1.5.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774)
LDAP Server
SNMP Agent
- SNMP Agent v.3.13.0 Show release notesHide release notes
- Feature: Support NodeJS api monitoring (M16185) - link
- Improvement: Generate Probe ID to support inheritance (M16035) - link
- Bugfix: Support multiple range of channels in dahdi monitoring (M17043) - link
- Bugfix: HP DL20 Gen9 machine crashed when module was installed on baseline 2. Remove support for HP Gen9 hardware monitoring on baseline 2 (M17258) - link
- Bugfix: Remove asterisk manager trace file (M17507) - link
SNMP Agent v.3.12.5 (intermediate version) Show release notesHide release notes
- Bugfix: Upgrade package version (M0)
SNMP Agent v.3.12.4 (intermediate version) Show release notesHide release notes
- Bugfix: Remove asterisk manager trace file (M17507)
- Deprecated: Wrong package installed (M0)
Escaux Connect
System Base
- System Base v.1.13.0 Show release notesHide release notes
- Bugfix: Cluster synchronization broke prompt symlinks (M18867)
- Improvement: Remove unused daemon process that caused memory issues (M19120)
- Feature: Added local tasks support (Backport)(M18513)
System Base v.1.12.2 (intermediate version) Show release notesHide release notes
- Bugfix: Apply changes could remove configuration in some rare cases (M16800)
- Bugfix: Remove obsolete public key (M16229)
- Deprecated: Unused daemon process was causing high memory usage (M19120)
System Base v.1.12.1 (intermediate version) Show release notesHide release notes
- Bugfix: Coredumps appeared on the VSOP host filesystem instead of the VSOP filesystem (M16350)
- Deprecated: Adds an obsolete public key to the SOP (M16229)
Unified End Point Support
Unified End Point Support v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Provides a proxy to the UEP (M17285)
- Deprecated: Missing parameter
Unified End Point Support v.2.0.3 (intermediate version) Show release notesHide release notes
- Deprecated: Not released (M0)
Unified End Point Support v.2.0.2 (intermediate version) Show release notesHide release notes
- Bugfix: Add defenses to avoid involuntary slot reset (M0)
Database Schema
Database Schema v.2.10.2 (intermediate version) Show release notesHide release notes
- Bugfix: SOP-SMP DB synchronization could fail (M16953)
Call Management
- Call Management v.1.8.6 Show release notesHide release notes
- Bugfix: Listen to voicemail from inside net.Console was not working (M19038)
- Bugfix: Incorrect transfer destination was published in queue_log (M19497)
Call Management v.1.8.5 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect call tracking in case of call pickup (M19339)
Call Management v.1.8.4 (intermediate version) Show release notesHide release notes
- Bugfix: Outgoing calls towards an invalid number would create hanging calls (M18823)
VMXML
VMXML v.2.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Set right to allow asterisk to play voicemail (M18056) - link
New resource versions
- SyncLDAP
- SyncLDAP v.1.9.1 (intermediate version) Show release notesHide release notes
- Improvement: Display owner of extension that is modified (M8804)
- Deprecated: Accidental debug caused out-of-memory (M0)
SyncLDAP v.1.9 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters get garbled(M00000)
SyncLDAP v.1.8 (intermediate version) Show release notesHide release notes
- Bugfix: Corrected the visual bug of the report when 'Delete Policy' set to never
SyncLDAP v.1.7 (intermediate version) Show release notesHide release notes
- Feature: Added option 'Delete Policy' (M0004505)
- Deprecated: Visual bug in the report
SyncLDAP v.1.6 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters not properly displayed in debug output report (M0004461)
SyncLDAP v.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: users with non-ascii characters in their name are always reported as being updated
SyncLDAP v.1.4 (intermediate version) Show release notesHide release notes
- bugfix: updates in user attributes not synced
SyncLDAP v.1.3 (intermediate version) Show release notesHide release notes
- Improvement: Improved report
- Improvement: Catch errors if record already exists on SMP with source not LDAP
- Feature: Dry-run mode
- Improvement: Improved detection of HA mode
SyncLDAP v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: minor corrections
PhoneZeroConf
Irisnet Cloudphone Report
ThomsonST2022
ThomsonST2030
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.10.3 - General deployment
Release notes
- Improvement: Support of VVX 501 & 601 (M16527)
- Bugfix: passwords for admin and customer are never set from the local admin password module (M17628)
- Bugfix: remove auto offhook in SVE2 resource template (M18497)
- Bugfix: primary and secondary phone aren't taken correctly from AD (M18517)
- Bugfix: Slot gets reset after making a change in the profile parameters (M18515)
- Bugfix: Fusion 3.10.2 Speeddial global var is declared as admin var but needs to be user var (M18414)
- Bugfix: adapt DHCP server module to support vendor and/or hardware specific (M18199)
- Bugfix: Possibilty to disable the directory softkey on VVX (M18157)
- Bugfix: Support VVX4xx with netConsole (M0)
Special manual upgrade actions
| Action |
| Apply Changes |
| Install Modules |
Changed components
Show changed componentsHide changed components
New module versions
SOP API
SOP API v.4.18.0 (intermediate version) Show release notesHide release notes
- Feature: Add User Agent in dbSetProfile callback (M15755) - link
- Improvement: Re-introduce wildcards option (M15755) - link
- Bugfix: No BillSec after ccOriginate on Local channels (M15952) - link
- Bugfix: No CalledNumber after ccOriginate on Local channels (M16422) - link
- Deprecated: Not compatible with escaux user (M16876) - link
SOP API v.4.17.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
SOP API v.4.16.0 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure the filtering works for directory entries and external contacts. Ensure that error messages are returned in the correct format. Deprecate external sources of contact. Usage of UCModel is recommended (M14208) - link
LDAP Synchronization
- LDAP Synchronization v.1.14.0 Show release notesHide release notes
- Feature: Expose the definition of LDAP attribute to determine the user role for FUSION 4 (M12721)
- Feature: Added the ability to define primary and secondary phone (M18517)
- Deprecated: LDAP synchronization 1.4.0 was not importing DDIs any more (M20763)
LDAP Synchronization v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Support LDAP redundancy in LDAP module (M14430)
LDAP Synchronization v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added the ability to configure ldap paged size (M12109)
- Bugfix: Fixed fax number synchronization (M12290)
- Bugfix: Fixed issue caused by leading and trailing spaces in configuration values (M12197)
SMS API
Sangoma Vega Gateway Support
- Sangoma Vega Gateway Support v.1.2.0 Show release notesHide release notes
- Bugfix: The gateway was not reconnecting after power outage (M16090) - link
- Bugfix: Voice issues once call last more than 7 minutes (M16233) - link
- Bugfix: Randomn echo issues (M15915) - link
- Improvement: Firmware and dsp upgrade (M16232) - link
Call Management
Shell
- Shell v.1.23.1 Show release notesHide release notes
- Bugfix: Using recovery user to modify admin password was not working - backport (M16945)
- Bugfix: The password hashes for users of the filemanager were never set properly - backport (M17628)
Communication Server
- Communication Server v.3.15.6001 Show release notesHide release notes
- Bugfix: Voicemail were deleted after an apply-change (M18090) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.12 (intermediate version) Show release notesHide release notes
- Bugfix: Remove odbc idle check causing crashes (backport) (M17872) - link
- Deprecated: Never deployed in production
Communication Server v.3.15.11 (intermediate version) Show release notesHide release notes
- Bugfix: Deadlock on SS7 ACM reception (M22046) - link
- Limitation: Restricted to Tele2 FMU and Fuzer CDG (M0)
Communication Server v.3.15.10 (intermediate version) Show release notesHide release notes
- Improvement: Cleanup register flag (M21202) - link
- Bugfix: Deadlock when making ISUP call (M21370) - link
- Bugfix: Avoid SS7 CIC dual seizure (M21737) - link
- Limitation: Restricted to Tele2 FMU and Fuzer CDG (M0)
- Deprecated: Deadlock still possible (M22046) - link
Communication Server v.3.15.9 (intermediate version) Show release notesHide release notes
- Improvement: SS7 - Open media on ACM (backport) (M18205) - link
- Improvement: SS7 - Enable/disable the support of the Called party's status indicator (backport) (M18205) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.8 (intermediate version) Show release notesHide release notes
- Improvement: Added Connected Line Update in Intrude application (backport) (M17901) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.7 (intermediate version) Show release notesHide release notes
- Bugfix: RTP ports were not freed after connectivity loss while ringing (backport) (M17516) - link
- Bugfix: Continuous log rotation was not working (backport) (M12330) - link
- Deprecated: Higher version provide significant improvements (M0)
Unified Communication Model
Polycom Phone Support
- Polycom Phone Support v.5.7.0 Show release notesHide release notes
- Feature: Support Polycom VVX501 and VVX601 (M16527)
- Feature: Added the ability to define firmware upgrade schedule (M18512)
Polycom Phone Support v.5.6.1 (intermediate version) Show release notesHide release notes
- Bugfix: Status page was not accessible when the HTTP provisioning was activated (M17415) - link
- Bugfix: Speedials not updated on configuration reload (M18373) - link
Polycom Phone Support v.5.6.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade firmware for IP7000 on Internet (M15791) - link
New resource versions
ReportCDR
ReportCDR v.2.13.6 (intermediate version) Show release notesHide release notes
- Bugfix: The comma separated report output was not correct (M15842)
ReportCDR v.2.13.5 (intermediate version) Show release notesHide release notes
- Bugfix: Userfield filter was not taken into account (M15004)
- Deprecated: Missmach between report with comma and dot separated values (M15842)
ReportCDR v.2.13.4 (intermediate version) Show release notesHide release notes
- Bugfix: Userfiled filter was not saved (M15004)
- Deprecated: Missmach between report with comma and dot separated values (M15842)
ReportCDR v.2.13.3 (intermediate version) Show release notesHide release notes
- Feature: Allow to add pagebreaks after each group in summary report (M0012326)
- Deprecated: Missmach between report with comma and dot separated values (M15842)
ReportCDR v.2.13.2 (intermediate version) Show release notesHide release notes
- Bugfix: Removed summarize by caller id (M10877)
- Deprecated: Missmach between report with comma and dot separated values (M15842)
ReportCDR v.2.13.1 (intermediate version) Show release notesHide release notes
- Feature: Add the userfield column (M8960)
- Improvement: Make filters with OR operator work on more fields (M6597)
- Deprecated: Missmach between report with comma and dot separated values (M15842)
ReportCDR v.2.13.0 (intermediate version) Show release notesHide release notes
- Feature: Support price decimal formating for sum and detail report (M0)
- Bugfix: Incorrect timestamp was used in some circumstances (M765)
- Deprecated: Missmach between report with comma and dot separated values (M15842)
SyncLDAP
SyncLDAP v.1.9.1 (intermediate version) Show release notesHide release notes
- Improvement: Display owner of extension that is modified (M8804)
- Deprecated: Accidental debug caused out-of-memory (M0)
SyncLDAP v.1.9 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters get garbled(M00000)
SyncLDAP v.1.8 (intermediate version) Show release notesHide release notes
- Bugfix: Corrected the visual bug of the report when 'Delete Policy' set to never
SyncLDAP v.1.7 (intermediate version) Show release notesHide release notes
- Feature: Added option 'Delete Policy' (M0004505)
- Deprecated: Visual bug in the report
SyncLDAP v.1.6 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters not properly displayed in debug output report (M0004461)
SyncLDAP v.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: users with non-ascii characters in their name are always reported as being updated
SyncLDAP v.1.4 (intermediate version) Show release notesHide release notes
- bugfix: updates in user attributes not synced
SyncLDAP v.1.3 (intermediate version) Show release notesHide release notes
- Improvement: Improved report
- Improvement: Catch errors if record already exists on SMP with source not LDAP
- Feature: Dry-run mode
- Improvement: Improved detection of HA mode
SyncLDAP v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: minor corrections
ReportSDR
SangomaVega3000FXS
Unified End Point SIP peer
QueueRule
Queue
Queue v.3.2.0 (intermediate version) Show release notesHide release notes
- Feature: Queue rules (M16973)
Queue v.3.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow analogue ZDA devices registered in the queue to be called. (M11037)
Polycom Virtual Phone
PolycomIP331
PolycomIP331 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP6000
PolycomIP6000 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP650
PolycomIP650 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomIP7000
PolycomIP7000 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791) - link
- Feature: SIP peer-specific RTP port range (M16702) - link
- Bugfix: Push feature was not working on VVX410 (M16490) - link
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950) - link
PolycomVVX500
PolycomVVX500 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX1500
PolycomVVX1500 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX310
PolycomVVX310 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX400
PolycomVVX400 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX300
PolycomVVX300 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX410
PolycomVVX410 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX600
PolycomVVX600 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX101
PolycomVVX101 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX201
PolycomVVX201 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX301
PolycomVVX301 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX401
PolycomVVX401 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX411
PolycomVVX411 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX311
PolycomVVX311 v.5.7.0 (intermediate version) Show release notesHide release notes
- Feature: IP7000 on internet (M15791)
- Feature: SIP peer-specific RTP port range (M16702)
- Bugfix: Push feature was not working on VVX410 (M16490)
- Bugfix: Postsync missing implementations when using two different version on the same SOP (M16950)
PolycomVVX501
PolycomVVX601
New action versions
- STARTAPPLICATION.3.1.0
- STARTAPPLICATION.3.1.0 v.1.00 Show release notesHide release notes
- Improvement: Added LastUserOffice LastUserDepartment LastUserLogin LastUserOwner LastUserProfile and LastUserStatus (M6757)
- Limitation: If a change occurs after an apply change, it won't be taken into account by STARTAPPLICATION. Use STARTDYNAMIC application instead.(M6757)
Included components
Modules
Resources
Actions
Version 3.10.2 - Deprecated Restricted release!
Release notes
- Bugfix: E164 standardization in call history (M17940) - link
- Bugfix: standardization of Polycom display to extension + Name (M0)
- Bugfix: Clean up mess of bad implementation of Connecting Service (M0)
- Bugfix: Clean up mess old release and wrong implementation (M0)
- Bugfix: Translation Typo error (M0)
- Deprecated: useless (M0)
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- SOP API
- SOP API v.4.17.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
- SOP API v.4.16.0 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure the filtering works for directory entries and external contacts. Ensure that error messages are returned in the correct format. Deprecate external sources of contact. Usage of UCModel is recommended (M14208) - link
New resource versions
- SyncLDAP
- SyncLDAP v.1.9.1 (intermediate version) Show release notesHide release notes
- Improvement: Display owner of extension that is modified (M8804) - link
- Deprecated: Accidental debug caused out-of-memory (M0)
SyncLDAP v.1.9 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters get garbled(M00000) - link
SyncLDAP v.1.8 (intermediate version) Show release notesHide release notes
- Bugfix: Corrected the visual bug of the report when 'Delete Policy' set to never
SyncLDAP v.1.7 (intermediate version) Show release notesHide release notes
- Feature: Added option 'Delete Policy' (M0004505) - link
- Deprecated: Visual bug in the report
SyncLDAP v.1.6 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters not properly displayed in debug output report (M0004461) - link
SyncLDAP v.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: users with non-ascii characters in their name are always reported as being updated
SyncLDAP v.1.4 (intermediate version) Show release notesHide release notes
- bugfix: updates in user attributes not synced
SyncLDAP v.1.3 (intermediate version) Show release notesHide release notes
- Improvement: Improved report
- Improvement: Catch errors if record already exists on SMP with source not LDAP
- Feature: Dry-run mode
- Improvement: Improved detection of HA mode
SyncLDAP v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: minor corrections
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.10.1 - Early deployment Restricted release!
Release notes
- Bugfix: Calendar extension not linked to the SOP (M18064) - link
- Bugfix: Calendar inverted signal for Corporate/Private mode to UEP (M18065) - link
- Bugfix: Translations typo error (M18074) - link
- Bugfix: Redirect WebRTC calls in corporate mode to Fusion (M18076) - link
- Bugfix: Upgrade shell to fix admin login (M16132) - link
- Bugfix: change voicemail mode to default (M17477) - link
Special manual upgrade actions
| Action |
| Install modules |
| Apply Changes |
Changed components
Show changed componentsHide changed components
New module versions
SOP API
- SOP API v.4.17.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
SOP API v.4.16.0 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure the filtering works for directory entries and external contacts. Ensure that error messages are returned in the correct format. Deprecate external sources of contact. Usage of UCModel is recommended (M14208) - link
New resource versions
- SyncLDAP
- SyncLDAP v.1.9.1 (intermediate version) Show release notesHide release notes
- Improvement: Display owner of extension that is modified (M8804) - link
- Deprecated: Accidental debug caused out-of-memory (M0)
SyncLDAP v.1.9 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters get garbled(M00000) - link
SyncLDAP v.1.8 (intermediate version) Show release notesHide release notes
- Bugfix: Corrected the visual bug of the report when 'Delete Policy' set to never
SyncLDAP v.1.7 (intermediate version) Show release notesHide release notes
- Feature: Added option 'Delete Policy' (M0004505) - link
- Deprecated: Visual bug in the report
SyncLDAP v.1.6 (intermediate version) Show release notesHide release notes
- Bugfix: non-ascii characters not properly displayed in debug output report (M0004461) - link
SyncLDAP v.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: users with non-ascii characters in their name are always reported as being updated
SyncLDAP v.1.4 (intermediate version) Show release notesHide release notes
- bugfix: updates in user attributes not synced
SyncLDAP v.1.3 (intermediate version) Show release notesHide release notes
- Improvement: Improved report
- Improvement: Catch errors if record already exists on SMP with source not LDAP
- Feature: Dry-run mode
- Improvement: Improved detection of HA mode
SyncLDAP v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: minor corrections
TopicSeniorIpPhone
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.10.0 - General deployment Restricted release!
Release notes
- Feature: Add the possibility to configure a connecting service in the CallQueuer (M16820) - link
- Feature: VoicemailMenu is in full mode, not Lite anymore (M17477) - link
- Feature: Support of UEP 2.x (M16153) - link
- Feature: Add support for FMU Calendar mode (M17325) - link
- Feature: Add support for FMU Locked Calendar mode (M17325) - link
- Feature: update all template polycom's resources to support 99 speeddials (M0)
- Feature: Mail-to-Fax now support gif/jpg image in mail footnote (M13957) - link
- Feature: ConnectMe/FMU Corporate mode will not go back anymore to FMU (M0)
- Improvement: Add new profile parameter's translation for UEP 2.x (M0)
- Improvement: security enforcement (M0)
- Improvement: Aligned the version of CallDevices that was used (M16620) - link
- Improvement: Upgraded Cluster Sync module to remove size limit for speeddials (M14143) - link
- Improvement: Import new default template SDX6 resource (M0)
- Improvement: Import default template for Polycom VVX101/201/301/311/401/411 (M0)
- Improvement: Remove NTP server for vSOP (M16993) - link
- Improvement: Upgraded the SIP selftest probe (dependency) (M15994) - link
- Improvement: Aligned ringing time for user and callqueuer profile (M15648) - link
- Improvement: Aligned the version of GetExtensions that was used (M0)
- Improvement: Improved the auto answer mechanism for net.Console (M16620) - link
- Improvement: Removed the necessity to configure the type of reception phone for net.Console (M16620) - link
- Improvement: Add Thomson module & resource (M0)
- Improvement: Add LG module & resource (M0)
- Improvement: Add Algo module & resource (M0)
- Improvement: Add Topic Senior module & resource (M0)
- Improvement: Remove netBuzz module (M0)
- Improvement: Remove netDesktop module (M0)
- Improvement: Remove Kernel module (M0)
- Improvement: Remove Sangoma module (M0)
- Bugfix: Upgraded the Communication Server module to fix codec change issues when reinviting (M15994) - link
- Bugfix: Fusion Presence don't flood anymore (M17545) - link
- Bugfix: Upgraded Polycom firmware to avoid slowness on VVX phones (M16654) - link
- Bugfix: It was not possible to activate a forward via the web menu on the VVX phones (M15981) - link
- Bugfix: Date and time was not shown correctly on the VVX phones (M16614) - link
- Bugfix: Changed routing table to make sure premium services can't be called when not allowed (M16058) - link
- Bugfix: Upgraded the SNMP Agent module to avoid random crashes (M17258) - link
- Bugfix: Upgraded PUM as it was not working in clustered setups (M16121) - link
- Bugfix: It was not possible to set a call forward to a number containing a + (M17023) - link
- Bugfix: Pincode is now correctly pushed on all cluster's sop (M17391) - link
- Bugfix: phone's context is correctly set now if the phone's resource use a template (M16411) - link
- Bugfix: clean up Escaux Connect Module parameters (M0)
- Bugfix: clean up SIP trunk parameters after resource update (M0)
- Bugfix: Queue log are now correctly recorded in DB (M17253) - link
Special manual upgrade actions
| Action |
| Install modules |
| Apply changes |
| Restart Communication Server |
| Restart application management server |
| Reboot Polycom phones |
| Reinstall net.Console |
Changed components
Show changed componentsHide changed components
New module versions
net.Buzz
- net.Buzz v.1.4.0 Show release notesHide release notes
- Feature: Enabled IM/Presence by default (M8035) - link
- Feature: Configurable voicemail extension (M8770) - link
- Limitation: The option "Hide my number" doesn't result in a hidden number. Workaround: hide the number through a callflow. (M9347) - link
- Limitation: The online status dropdown is shown but should be disregarded. (M9347) - link
- Limitation: Hiding the intentional status through "Preferences > Privacy" doesn't work. (M9347) - link
- Limitation: Transferring/holding video calls can in some cases lead to unexpected application behavior. Workaround: Initiate a voice call instead. (M9350) - link
Kernel
Call Management
LDAP Synchronization
Database Server
- Database Server v.2.8.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Bugfix: ODBC only allowed a single query at the time. (M14911) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
Database Server v.2.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: Grants to write instant messages into the database were not written until tables were present (M13589) - link
Database Server v.2.7.0 (intermediate version) Show release notesHide release notes
- Bugfix: Use correct encoding for IM (M12334) - link
Database Server v.2.6.0 (intermediate version) Show release notesHide release notes
- Feature: Added shell plugin to restore database backup (M0)
Shell
- Shell v.1.23.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Bugfix: Shell plugins were not accessible for escaux user (M13994) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade other modules too. The module documentation lists special upgrade actions for this version (M14774) - link
- Deprecated: Login on Fileman was no more possible (M17628) - link
DHCP Server
- DHCP Server v.2.5.0 Show release notesHide release notes
- Feature: added support for Gigaset phones DHCP option 114 (M12978) - link
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
NTP server
- NTP server v.1.9.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
SOP API
- SOP API v.4.17.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
SOP API v.4.16.0 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure the filtering works for directory entries and external contacts. Ensure that error messages are returned in the correct format. Deprecate external sources of contact. Usage of UCModel is recommended (M14208) - link
SOP API v.4.15.2 Show release notesHide release notes
- Feature: Allowing AdminVAR modification when request comes from local IP (M17391) - link
Application Management Server
- Application Management Server v.3.5.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
FAX Server
- FAX Server v.2.6.0 Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Bugfix: Compatibility with escaux user (M16876) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
FAX Server v.2.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Caller ID was not always present in email's subject (Backport) (M16958) - link
FAX Server v.2.5.0 (intermediate version) Show release notesHide release notes
- Feature: Support for PNG/GIF/BMP/JPG in html email body (M13957) - link
FAX Server v.2.4.2 (intermediate version) Show release notesHide release notes
- Bugfix: Add additional supported content types for PDF files for email to fax (M13793) - link
- Improvement: Allow disabling the body of the message (M13807) - link
- Deprecated: The apply-sop-change was not working properly (M0)
FAX Server v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: email notifications for faxes are not sent in the user's language (M13458) - link
- Deprecated: The apply-sop-change was not working properly (M0)
FAX Server v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Included translations for Spanish, French, Dutch, Italian and German. (M0012862) - link
- Deprecated: The apply-sop-change was not working properly (M0)
Escaux Connect
SNMP Agent
SNMP Agent v.3.12.2 (intermediate version) Show release notesHide release notes
- Bugfix: probe were not working on ProLiant older than G9 (M15980) - link
SNMP Agent v.3.12.1 (intermediate version) Show release notesHide release notes
- Bugfix: Upgrade of SNMP Agent on Baseline 3 could fail (M15964) - link
SNMP Agent v.3.12.0 (intermediate version) Show release notesHide release notes
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: Improve dahdi probe for lua expression (M15598) - link
- Improvement: Improve sip probe for lua expression (M13970) - link
- Bugfix: Upgrade SNMP subsystem for HP hardware probes support (M15763) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded (M14774) - link
- Deprecated: Upgrade from previous version is failing on Baseline 3 (M15964) - link
SNMP Agent v.3.11.2 (intermediate version) Show release notesHide release notes
- Bugfix: SNMP agent was not restarted when it crashed and the machine was in standby mode (PC-1142)
New resource versions
VSOP Memory Usage
TainetVenus2832
TainetVenus2832 v.1.1.0 Show release notesHide release notes
- Feature: Allows configuration of registration time (M7894) - link
- Improvement: added the possibility to configure the dialplan (M8713) - link
net.Buzz
ReportCDR_Q
TainetVenus2804
TainetVenus2816
ThomsonST2022
ThomsonST2030
LG-Ericsson IP8815
LG-Ericsson IP8830
LG-Ericsson IP8820
LG-Ericsson IP8840
Algo8180
- Algo8180 v.1.2.0 Show release notesHide release notes
- Improvement: VLAN settings exposed in the resource (M0)
- Improvement: Resource creation with duplicate MAC address is no longer allowed (M14025) - link
TopicSeniorIpPhone
- TopicSeniorIpPhone v.1.1.0 Show release notesHide release notes
- Feature: Ability to enable and configure LLDP interval (M14133) - link
- Deprecated: DHCP Option 120 should be disabled by default when provisioned (TS-5087)
PolycomVVX1500
Unified End Point SIP peer
Unified End Point SIP peer v.1.8.0 Show release notesHide release notes
- Feature: Instant Messaging support (M17348) - link
- Feature: Support for profile preference (M0)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.6.0 - Deprecated Restricted release!
Release notes
- Bugfix: Upgraded the Communication Server module to fix codec change issues when reinviting (M15994) - link
- Bugfix: Upgraded the SIP selftest probe (dependency) (M15994) - link
- Bugfix: Aligned ringing time for user and callqueuer profile (M15648) - link
- Bugfix: Upgraded Polycom firmware to avoid slowness on VVX phones (M16654) - link
- Bugfix: It was not possible to activate a forward via the web menu on the VVX phones (M15981) - link
- Bugfix: Date and time was not shown correctly on the VVX phones (M16614) - link
- Bugfix: Changed routing table to make sure premium services can't be called when not allowed (M16058) - link
- Bugfix: Upgraded the SNMP Agent module to avoid random crashes (M17258) - link
- Bugfix: Upgraded PUM as it was not working in clustered setups (M16121) - link
- Bugfix: Aligned the version of GetExtensions that was used (M0)
- Improvement: Aligned the version of CallDevices that was used (M16620) - link
- Bugfix: Improved the auto answer mechanisme for net.Console (M16620) - link
- Bugfix: Removed the necessity to configure the type of reception phone for net.Console (M16620) - link
- Feature: Added the possibility to configure a connecting service in the CallQueuer (M16820) - link
- Bugfix: It was not possible to set a call forward to a number containing a + (M17023) - link
- Feature: Removed Escaux Connect support to support Unified End Point integration (M16153) - link
- Improvement: Upgraded Cluster Sync module to remove size limit for speeddials (M14143) - link
- Deprecated: bad last build, wrong implementation, too many errors, unusable (M0)
Special manual upgrade actions
| Action |
| Restart of the Communication Server |
| Reboot of all Polycom VVX phones |
| Reinstall net.Console |
| Make sure the Connecting Service in the Template-CallQueuer extensions is empty (if not used) as this is a reused global parameter |
Changed components
Show changed componentsHide changed components
New module versions
LG-Ericsson Phone support
- LG-Ericsson Phone support v.1.0.4 Show release notesHide release notes
- Bugfix: Old configuration files were not correctly deleted after an apply changes (M8764) - link
- Bugfix: Templates will no longer be deleted if they still used as resources (M10051) - link
Thomson Phone Support
- Thomson Phone Support v.1.5.1 Show release notesHide release notes
- Bugfix: Old configuration files were not deleted correctly after an apply changes (M8764) - link
- Bugfix: Special characters breaks corporate directory (M9450) - link
Topic Phone Support
Cluster & SOP Active-Active Support
- Cluster & SOP Active-Active Support v.1.10.0 Show release notesHide release notes
- Feature: Support of unlimited parameter size for speeddials (M14143) - link
- Feature: Added firewall rules (M13989) - link
- Bugfix: Synchronization issue when an extension is removed (M16713) - link
- Bugfix: Fixed profile synchronization issue (M14595) - link
Cluster & SOP Active-Active Support v.1.9.0 (intermediate version) Show release notesHide release notes
- Feature: Added error handling for the Cluster Synchronization probe (M11252) - link
- Improvement: Profile synchronization script could fetch too many extensions (M11252) - link
- Improvement: Launch status update callflow configured in SOP API (M13509) - link
- Bugfix: Profile synchronization was no more working with the new profile parameter set (M14102) - link
SOP API
Polycom Phone Support
- Polycom Phone Support v.5.5.1 Show release notesHide release notes
- Bugfix: VVX firmware upgrade to 5.5.1 fixing VVX 300,310,400 and 410 slowness after upgrade (M16654) - link
- Bugfix: Fixes reported VVX 310 call issues (M16991) - link
- Bugfix: Use Datetime offset from the configuration file even if provided by the DHCP server (M17165) - link
Polycom Phone Support v.5.5.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade IP331 firwmare to enable internet (M16829) - link
- Deprecated: The firmware 5.5.0 offered in this release have several stability issue (M16654) - link
Unified End Point Support
- Unified End Point Support v.2.0.1 Show release notesHide release notes
- Bugfix: Make timeout configurable and increase default value for request reset flag. (M17155) - link
- Bugfix: Avoid opening more files than the default ulimit value. (M0)
PUM
Communication Server
- Communication Server v.3.15.6 Show release notesHide release notes
- Improvement: Debconf template format support (backport)
- Improvement: Continuous log rotation (backport) (M12330) - link
- Improvement: Make virtual extensions and presence state timeout configurable (backport) (M17545) - link
- Improvement: Review mapping ISUP cause - SIP error (backport) (M17466) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.5 (intermediate version) Show release notesHide release notes
- Bugfix: Correctly authenticate outgoing instant messages (backport) (M17348) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.4 (intermediate version) Show release notesHide release notes
- Bugfix: Avoid safetynet false positive (M17031) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.3 (intermediate version) Show release notesHide release notes
- Bugfix: Define multiple range of CICS (M17043) - link
- Bugfix: Fix crash during func_odbc reload (backport) (M16670) - link
- Bugfix: Crash when handling codec's payloads (backport) (M16969) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.2 (intermediate version) Show release notesHide release notes
- Bugfix: Conf bridge announcements not played in the user's language (backport) (M16253) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.1 (intermediate version) Show release notesHide release notes
- Bugfix: Process crashed in case of ccOriginate API call (M16768) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.15.0 (intermediate version) Show release notesHide release notes
- Feature: Call swapping and transfer on media-strict PBX (M16247) - link
- Improvement: Packaging compatible with APT (M16327) - link
- Improvement: Ability to not send ISUP FAR message (M16226) - link
- Improvement: HTTP action func_curl now allows multiple headers (M16333) - link
- Improvement: Support recent cipher suites for tls (M15787) - link
- Bugfix: Memory leak when error on outgoing MWI suscription (M16288) - link
- Bugfix: Leak and global lock in HTTP action func_curl removed (M16333) - link
- Bugfix: Parsing crash of diversion header (M16349) - link
- Deprecated: Process crashes in case of ccOriginate API call (M16768) - link
Communication Server v.3.14.3 (intermediate version) Show release notesHide release notes
- Bugfix: Custom unavailable minivm greeting was never played (backport) (M16855) - link
- Bugfix: The recorded name was not used when the option skip fallback was used (backport) (M16855) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.14.2 (intermediate version) Show release notesHide release notes
- Improvement: removed dependency with shell 1.23 (M0)
- Bugfix: Process crashed in case of ccOriginate API call (M16768) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.14.1 (intermediate version) Show release notesHide release notes
- Improvement: Compatibilty with updated fail2ban (M15083) - link
- Bugfix: Local networks are now whitelisted in fail2ban (M16059) - link
- Bugfix: Solve crashes when parsing JSON (M15859) - link
- Bugfix: Avoid codec negotiation loop in Alcatel call swapping (M15862) - link
- Bugfix: Dynamic payload change was not working (M16025) - link
- Bugfix: Prevent SDP-version-ignore in case of codec re-negotiation (M15994) - link
- Bugfix: Installation failed if older firewall module was present (M15989) - link
- Deprecated: Process crashes in case of ccOriginate API call (M16768) - link
Communication Server v.3.14.0 (intermediate version) Show release notesHide release notes
- Feature: Add option to skip the fallback in MinivmGreet application (M14606) - link
- Feature: Convert plugins to new library model (M14774) - link
- Improvement: Compatibility with Chrome 52 for WebRTC external calls (M15479) - link
- Improvement: Add firewall rules (M15082) - link
- Bugfix: Fix small memory leak on every WebRTC call (M15479) - link
- Bugfix: Minivm tmp folder was not always created (M13783) - link
- Bugfix: Fix to get the sub directory (tmp) in minivm (M13783) - link
- Bugfix: Crash occurring when parsing the SIP message 181 forwarding (M15369) - link
- Deprecated: Higher version provide significant improvements (M0)
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: You will have to upgrade the Shell module and other modules too. Please verify the release notes of the Shell module 1.23.0 to find out which modules need to be upgraded. (M14774) - link
New resource versions
PolycomIP331
PolycomIP330
PolycomIP450
PolycomIP550
PolycomIP560
PolycomIP6000
PolycomIP650
PolycomIP670
PolycomIP7000
PolycomVVX101
PolycomVVX201
PolycomVVX300
PolycomVVX301
PolycomVVX310
PolycomVVX311
PolycomVVX400
PolycomVVX401
PolycomVVX410
PolycomVVX411
PolycomVVX500
PolycomVVX600
Unified End Point SIP peer
- Unified End Point SIP peer v.1.7.0 Show release notesHide release notes
- Feature: Support cluster & active-active setups: the configuration file publishes the address of both SOP1 & SOP2 (M16210) - link
Unified End Point SIP peer v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to configure more features (M0)
Unified End Point SIP peer v.1.5.0 (intermediate version) Show release notesHide release notes
- Feature: Support for feature management (M14931) - link
- Feature: Add language synchronization support (M0)
Unified End Point SIP peer v.1.4.0 (intermediate version) Show release notesHide release notes
- Feature: Added the possibility to configure the Outside Line Access Code (M15057) - link
Unified End Point SIP peer v.1.3.0 (intermediate version) Show release notesHide release notes
- Improvement: Better support provisioning in clusters
Unified End Point SIP peer v.1.2.2 (intermediate version) Show release notesHide release notes
- Improvement: Do not generate configuration when no extension is assigned to SDX6 (M12360) - link
Unified End Point SIP peer v.1.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Mobile number was ignored in the provisioning
Unified End Point SIP peer v.1.2.0 (intermediate version) Show release notesHide release notes
- Feature: Add Home and Mobile number to the provisioning file (M11138) - link
- Improvement: When Unified End Point Support module is installed, deleted resources are removed from the provisioning directory (M11500) - link
- Deprecated: Does not take in account the mobile number
Unified End Point SIP peer v.1.14.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
Unified End Point SIP peer v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Added contact group in parameters of the SDX6
- Feature: Add the option to accept incoming caller id
Unified End Point SIP peer v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Support IMRI number (M21695) - link
Unified End Point SIP peer v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support transfer context (M20711) - link
Unified End Point SIP peer v.1.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: Really allow no authentication (M0)
Unified End Point SIP peer v.1.10.0 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure unique mac address (M19673) - link
New action versions
- STARTDYNAMICAPPLICATION.8.4.3
Included components
Modules
Resources
Actions
Version 3.5.2 - General deployment
Release notes
- Bugfix: Updated net.Console to avoid freeze during attended transfer to a queue (M16325)
- Bugfix: Upgraded API to make sure the pincode is not reset during the night (M14732)
- Bugfix: Updated StartDynamicApplication to make sure the e-mail notifications are received correctly (M13401)
- Bugfix: Upgraded zeroconf to make sure new Polycom VVX models are supported (M16634)
Special manual upgrade actions
| Action |
| Reinstall net.Console |
Changed components
Show changed componentsHide changed components
New module versions
- SOP API
- SOP API v.4.15.0 Show release notesHide release notes
- Bugfix: extension's owner language was not taken into account in dbGetProfileParameters and dbGetProfileParametersLayout (M14785) - link
- Bugfix: Incorrect parameter permission when same parameter name is used in different parameter sets (M14780) - link
- Bugfix: The context of the extension was not consistently set (M14780) - link
- Bugfix: New API Method to optimize phone_overview on SMP (M14512) - link
- Bugfix: dbAuthenticate did not update the the secondary SOP (M14732) - link
net.Console
New resource versions
PhoneZeroConf v.2.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Make ZeroConf working when the "allowguest" option is set to no. (M9338)
- Feature: Added the ability to configure the ZeroConf extension (M0)
PhoneZeroConf v.1.9 (intermediate version) Show release notesHide release notes
- Improvement: Added compatibility with sopsync instead of checkd (M6071)
PhoneZeroConf v.1.8 (intermediate version) Show release notesHide release notes
- Feature: SOP1 and SOP2 fields of the phone will now be updated according to the extension
PhoneZeroConf v.1.7 (intermediate version) Show release notesHide release notes
- Feature: support Aastra 6753i phone
PhoneZeroConf v.1.6 (intermediate version) Show release notesHide release notes
- Feature: support Polycom IP335 phone
PhoneZeroConf v.1.5 (intermediate version) Show release notesHide release notes
- Feature: support aastra 6739i phone
PhoneZeroConf v.1.4 (intermediate version) Show release notesHide release notes
- Bugfix: phones not rebooted when phone not on same LAN as SOP
PhoneZeroConf v.1.3 (intermediate version) Show release notesHide release notes
- Bugfix: phones not reloaded when not scheduled (ran by checkd) (M0003857)
PhoneZeroConf v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: apply changes not performed when task is scheduled and in a cluster environment (M0003930)
PhoneZeroConf v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Implements Polycom IP 500/501
PhoneZeroConf v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Implements Aastra 6737i (M10280)
New action versions
- STARTDYNAMICAPPLICATION.8.4.2
Included components
Modules
Resources
Actions
Version 3.5.1 - Early deployment Restricted release!
Release notes
- Bugfix: Replaced the Escaux Connect parameters to the phone settings menu to avoid seeing the "advanced settings" menu in Escaux Connect (M14939) - link
- Bugfix: Updated Escaux Connect to have a translation for the main menu (M14939) - link
- Bugfix: Upgraded SNMP agent to make it work on new server types (M16446) - link
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- SNMP Agent
- SNMP Agent v.3.11.0 (intermediate version) Show release notesHide release notes
- Bugfix: Support DL360 G9 and DL20 (M15310) - link
- Deprecated: The installation could fail on some type of Server (M0)
Escaux Connect
Escaux Connect v.2.5.9 (intermediate version) Show release notesHide release notes
- Improvement: Use SMP password policy and display proper error message (M14685) - link
- Bugfix: Forgot password issue on iOS9 devices (M0014705) - link
- Bugfix: Remove installation issue (M15589) - link
- Deprecated: Rights expired for background image (M17916) - link
Escaux Connect v.2.5.8 (intermediate version) Show release notesHide release notes
- Feature: Make reset password configurable (M12953) - link
- Feature: Allow to use icons as intentional status (M13762) - link
- Deprecated: Rights expired for background image (M17916) - link
Escaux Connect v.2.5.7 (intermediate version) Show release notesHide release notes
- Improvement: Escaux connect: if there is only one category, skip it (M13277) - link
- Deprecated: Not used in production. (M0)
Escaux Connect v.2.5.6 (intermediate version) Show release notesHide release notes
- Bugfix: On Internet explorer, do not select as favorite when pressing enter (M0011782) - link
- Deprecated: Rights expired for background image (M17916) - link
Escaux Connect v.2.5.5 (intermediate version) Show release notesHide release notes
- Bugfix: On Internet Explorer 10 and below you would get logged out when pressing enter after searching for a contact (M11782) - link
- Deprecated: Rights expired for background image (M17916) - link
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.5.0 - Early deployment Restricted release!
Release notes
- Bugfix: Updated Application Management Server to reduce logfile size (M13315) - link
- Bugfix: Updated net.Desktop to remove false errors after installation (M14173) - link
- Bugfix: Updated net.Console to remove false errors after installation (M14173) - link
- Bugfix: Updated webserver to remove false errors after installation (M14173) - link
- Bugfix: Updated Unified Communications Module to remove false errors after installation (M14173) - link
- Bugfix: Updated Test Smp Connectivity to remove false errors after installation (M14173) - link
- Bugfix: Updated Sangoma Card Support Module to remove false errors after installation (M14173) - link
- Bugfix: Updated LDAP Server to remove false errors after installation (M14173) - link
- Improvement: Updated Database Schema to clean up archived data (M10409) - link
- Feature: Updated Aastra Phone Support Module to have firmware 6.2 (M15085) - link
- Bugfix: Updated Mail Module to reduce disk space usage (M14683) - link
- Bugfix: Updated Unified Communications Module to improve merging mechanism (M11393) - link
- Bugfix: Updated SOP API Module to show international calls via dbGetCallHistory (M14737) - link
- Improvement: Updated SIP Trunk to correctly connect towards UEP Servers (M15193) - link
- Bugfix: Updated SNMP Agent Module to remove false errors when installing on vSOP's (M12943) - link
- Bugfix: Updated Shell Module to give customer access to Test Smp Connectivity (M12835) - link
- Bugfix: Updated Cisco ATA Support to have firmware 1.4.1 (M15031) - link
- Bugfix: Updated Call Management in order to make sure net.Console won't freeze in specific use cases (M14723) - link
- Bugfix: Updated System Base in order to be able store a high number of speeddials (M14143) - link
- Feature: Removed the sangoma module by default to support the new baseline. (M15861) - link
- Feature: Upgraded Polycom phone support to support VVX101, VVX201, VVX301, VVX311, VVX401, and VVX411 (M15901) - link
- Feature: Upgraded all Polycom resources to version 5.5 to support new VVX phones (M11423) - link
- Bugfix: Added missing translations (M14939) - link
- Improvement: Added the possibility for resellers to install the Third Party Remote Access module
Special manual upgrade actions
| Action |
| Restart the SOP |
| Reinstall net.Dektop |
| Reinstall net.Console |
| Reboot all phones |
Changed components
Show changed componentsHide changed components
New module versions
- Third Party Remote Access
VMXML
Web Server
- Web Server v.1.6.1 Show release notesHide release notes
- Improvement: RC4 and EXPORT Ciphers suite support disabled (M13063) - link
- Bugfix: An error was reported during installation when no actual error occurred (M12150) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Now you can chose between nginx or apache for the websockets (M11729) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.3 (intermediate version) Show release notesHide release notes
- Bugfix: No longer display non pertinent error on install (M0)
- Bugfix: Weak Ciphers disabled on the whole server (M0)
- Improvement: Defense to prevent the wrong configuration of the IP address (M12239) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: SSL weak ciphers disabled (M0)
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: HTTP, OpenSSL and PHP version type detection disabled. (M11658) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.5.0 (intermediate version) Show release notesHide release notes
- Bugfix: Increased connection limit (M11175) - link
- Bugfix: Poodle vulnerability fixed by disabling SSLv3 (M11215) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: The required certificate serial could sometimes be detected incorrectly (M10650) - link
- Feature: Enabling failover/loadbalancing capability
- Feature: Added the ability to authenticate users using SMP API via HTTP Basic Authentication (M10089) - link
- Improvement: Reload Apache after apply changes
- Feature: Make the timeout configurable (M10670) - link
- Feature: Added option to disable default site (M10940) - link
- Feature: HTTP Basic Authentication caching
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.3.0 (intermediate version) Show release notesHide release notes
- Feature: Provide Websocket proxy
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.2.6 (intermediate version) Show release notesHide release notes
- Bugfix: Fix compatibility issue with SOP Base module (M23979) - link
Web Server v.1.2.5 (intermediate version) Show release notesHide release notes
- Bugfix: Upgrading apache on baseline 2 to fix CVE-2011-319 (Backport)(M17647) - link
Web Server v.1.2.4 (intermediate version) Show release notesHide release notes
- Bugfix: the required certificate serial could sometimes be detected incorrectly (M10650) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Communication Server
- Communication Server v.3.13.0 Show release notesHide release notes
- Feature: MiniVM Support (M13781) - link
- Feature: MiniVM folder management support (M13780) - link
- Feature: MiniVM greeting management support (M13671) - link
- Feature: Fail2ban support (M14743) - link
- Feature: Support of custom CDR fields on ODBC (M13662) - link
- Feature: Early Media Suppression (M13756) - link
- Bugfix: Reload was needed to apply linear queue strategy (M13530) - link
- Bugfix: Fix WebRTC hold regression (M14070) - link
- Bugfix: When remote end sends a reinvite to change the codec, transcoding was not reinitialized (M13624) - link
- Bugfix: When remote end answers to a reinvite with several codecs, the channel codec was not the first codec proposed in the SDP (M13624) - link
- Bugfix: Process coredumps were not created in some cases (M13582) - link
- Bugfix: Misconfigured presence subscriptions could leak memory (M14357) - link
- Bugfix: RTP port not freed after fast ICE failure (M14502) - link
- Bugfix: NAT detection not always working (M14090) - link
- Bugfix: It was not possible to force the Caller ID in the Originate when the connected line is updated (M14727) - link
- Bugfix: Process failed to start after a fresh installation (M14951) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: In-band ringing setting "never" is now stricter. Must be changed to "no" to keep previous behavior (M13756) - link
- Deprecated: Higher version provide significant improvements (M0)
Communication Server v.3.12.0 (intermediate version) Show release notesHide release notes
- Improvement: Scalability and robustness registration flags (M11512) - link
- Improvement: Do not register at server startup (M13791) - link
- Bugfix: recvonly was missing in the SDP of the SIP trunk when a sendonly was received (M13299) - link
- Bugfix: RTP probation was not working (M12797) - link
- Bugfix: escall was not working when ulaw was not configure in the module (M13476) - link
- Bugfix: Define the maximum number of calls (M13602) - link
- Deprecated: Process failed to start after a fresh installation (M14951) - link
Communication Server v.3.11.10 (intermediate version) Show release notesHide release notes
- Improvement: Move ha scripts to asterisk (backport) (M17031) - link
- Bugfix: RTP ports were not freed after connectivity loss while ringing (backport) (M17516) - link
Communication Server v.3.11.9 (intermediate version) Show release notesHide release notes
- Bugfix: Fix crash during func_odbc reload (backport) (M16670) - link
- Improvement: Allow to configure HTTP bind address (backport) (M16508) - link
Communication Server v.3.11.8 (intermediate version) Show release notesHide release notes
- Bugfix: T38 was only working on eth0 (M16616) - link
- Deprecated: Apply changes fails because of syntax error in perl_code
Communication Server v.3.11.7 (intermediate version) Show release notesHide release notes
- Bugfix: Crash parsing diversion header (M16349) - link
- Deprecated: Apply changes fails because of syntax error in perl_code
Communication Server v.3.11.6 (intermediate version) Show release notesHide release notes
- Bugfix: Solve crashes when parsing JSON (backport) (M15859) - link
Communication Server v.3.11.5 (intermediate version) Show release notesHide release notes
- Improvement: Compatibility with Chrome 52 for WebRTC external calls (backport) (M15479) - link
- Bugfix: Fix small memory leak on every WebRTC call (backport) (M15479) - link
Communication Server v.3.11.4 (intermediate version) Show release notesHide release notes
- Bugfix: RTP port not freed after fast ICE failure (backport) (M14502) - link
Communication Server v.3.11.3 (intermediate version) Show release notesHide release notes
- Improvement: WebSocket connections more stable (backport) (M14354) - link
- Bugfix: Misconfigured presence subscriptions could leak memory (backport) (M14357) - link
Communication Server v.3.11.2 (intermediate version) Show release notesHide release notes
- Bugfix: Reload was needed to apply linear queue strategy (backport) (M13530) - link
- Bugfix: Update ICE stack fixing some crashes (backport) (M14190) - link
- Bugfix: Fix WebRTC hold regression (backport) (M14070) - link
Communication Server v.3.11.1 (intermediate version) Show release notesHide release notes
- Bugfix: escall was not working when ulaw was not configure in the module (backport) (M13476) - link
Communication Server v.3.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support REFER on own callid (M12936) - link
- Feature: New application SIPMute (M12935) - link
- Improvement: Never expose internal DNS aliases in outgoing requests (M13244) - link
- Improvement: Refresh MWI subscription on DNS update (M13374) - link
- Bugfix: RTP port exhaustion (M13145) - link
- Bugfix: MWI was using DNS even when not needed (M13180) - link
- Bugfix: Voice grammar in Dutch was incorrect (M13377) - link
- Bugfix: Externnotify was always activated (M13401) - link
Communication Server v.3.10.0 (intermediate version) Show release notesHide release notes
- Feature: DTMF based transfer can now send REFER on original call (M12492) - link
- Bugfix: Syntax to say time was incorrect in French and in Spanish (M13054) - link
Communication Server v.3.9.0 (intermediate version) Show release notesHide release notes
- Feature: adding response to EC ping on websocket (M12824) - link
- Improvement: Use better From header in Endpoint Abstraction register (M12859) - link
- Bugfix: Always keep retrying MWI subscription (M12491) - link
Communication Server v.3.8.0 (intermediate version) Show release notesHide release notes
- Feature: Custom internal DNS entry (M12728) - link
- Improvement: Threadpool options are now configurable (M11201) - link
- Improvement: Support incoming SIP REFER from Lync (M12617) - link
- Improvement: Re-register on DNS update (M12745) - link
- Bugfix: Realtime peers using WebSocket were unreachable after reload (M12574) - link
- Bugfix: Make notification on VoicemailMenu deactivable (M12601) - link
- Bugfix: Not able to record voicemail (M12800) - link
Communication Server v.3.7.0 (intermediate version) Show release notesHide release notes
- Feature: Multi-threaded task processors for messaging and presence (M11195) - link
- Feature: Make RTP binding address configurable, per peer (M12369) - link
- Feature: Limit size of message queue (M11201) - link
- Feature: New HINT_WATCHERS function (M11904) - link
- Improvement: Use correct encoding for instant messaging (M12334) - link
- Improvement: React on first watcher of a hint (M12395) - link
- Bugfix: Base64-encoded presence data was truncated (M12398)(M12526) - link
- Bugfix: FMU sync process could fail to run completely (M12627) - link
- Bugfix: Restore the old pincode prompt when joining a conference call (M11684) - link
- Bugfix: ICE could fail because of too many candidates
- Bugfix: Try to avoid hanging WebSocket connections
Communication Server v.3.6.3 (intermediate version) Show release notesHide release notes
- Lock JLO validation Proximus FIA
- Feature: Possibility to force the peer port when the host is a DNS name (M13754) - link
Communication Server v.3.6.2 (intermediate version) Show release notesHide release notes
- Bugfix: MWI was using DNS even when not needed (backport) (M13180) - link
Communication Server v.3.6.1 (intermediate version) Show release notesHide release notes
- Feature: DTMF based transfer can now send REFER on original call (backport) (M12492) - link
- Bugfix: Always keep retrying MWI subscription (backport) (M12491) - link
Communication Server v.3.6.0 (intermediate version) Show release notesHide release notes
- Feature: Add Google Cloud Messaging support to XMPP module (M11450) - link
- Feature: Subscribe to Message Waiting Indicator in EPA (M11156) - link
- Feature: Support dynamic EPA registration (M11071) - link
- Feature: New JSON presence format (M11901) - link
- Improvement: Remove realtime priority by default, reducing load peaks (M11182) - link
- Improvement: Added user=phone in From PAI, RPID and Diversion headers (M11422) - link
- Improvement: Make http session limit configurable (M11175) - link
- Improvement: Parse contact URI arguments (M10528) - link
- Improvement: All the allowed codecs are now proposed in the reinvite so that the remote peer should always accept the SDP (M11604) - link
- Improvement: Expose mailbox information in MWI notify callflow (M11969) - link
- Improvement: Support out-of-order notify matching an outstanding subscription (M11822) - link
- Improvement: Subscribe action offers more options and reports status (M12121) - link
- Improvement: Prevent remote bridge when both end does not negotiate the same capabilities (M11793) - link
- Bugfix: Received REINVITE with new codec were not propagated (M10416) - link
- Bugfix: Blind transfers were not logged properly in queue_log (M10886) - link
- Bugfix: PAI should only provide SIP URI format in output (M11245) - link
- Bugfix: Avoid duplicating MWI subscriptions on reload (M11156) - link
- Bugfix: Domain in the PAI for COLP were incorrect (M11245) - link
- Bugfix: Authorization header could be corrupted (M11005) - link
- Bugfix: Upstream fixes for DTLS and messages (M11335) - link
- Bugfix: Diversion reason lost (M11245) - link
- Limitation: iLBC support has been deprecated. G.729 is recommended for low bandwidth environments
- Bugfix: Support dynamic nature of address whatever the ss7 prefix configuration (M11804) - link
Communication Server v.3.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Make RTP binding address configurable (backport) (M12369) - link
- Bugfix: Update DTLS crypto to fix incoming calls in Firefox 39+ (M11873) - link
Communication Server v.3.5.1 (intermediate version) Show release notesHide release notes
- Improvement: Make http session limit configurable (M11175) - link
- Bugfix: Upstream fixes for DTLS and messages (M11335) - link
Communication Server v.3.5.0 (intermediate version) Show release notesHide release notes
- Feature: New upstream version (M9933) - link
- Feature: Support registering on multiple PBX using Abstracted Endpoint 2 (M10273) - link
- Feature: Added the voicemail volume gain parameter (M9914) - link
- Feature: Add xmpp configuration (M10373) - link
- Improvement: Add privacy in diversion header (M10216) - link
- Improvement: Added the possibility to only trust the PAI header (M10158) - link
- Improvement: Specific certificates for DTLS-SRTP (M9931) - link
- Improvement: Added request URI when pushing NOTIFY to the callflow (M10458) - link
- Improvement: Log microseconds (M10443) - link
- Improvement: Update ICE stack (M10936) - link
- Bugfix: Upgrade libssl (M10052) - link
- Bugfix: It was not possible to transfer video call using dynamic payload such as H264 (M8954) - link
- Bugfix: Don't start asterisk when sipsocket fails to bind (M9934) - link
- Bugfix: Video not working when dual ring of phone with video support and another one without (M9919) - link
- Bugfix: No new WebSocket connection would sometimes be accepted (M9877) - link
- Bugfix: Process could crash when detecting fax tone (M10100) - link
- Bugfix: Recurrent crash during DTLS handshake (M10104) - link
- Bugfix: IAXVARS could make asterisk crash (M10064) - link
- Bugfix: When receiving an 480 SIP message the dialstatus variable is in congestion (M10443) - link
- Bugfix: Audio issue when REINVITE with specific codec is rejected by remote (M10416) - link
Communication Server v.3.4.7 (intermediate version) Show release notesHide release notes
- Bugfix: Memory leak when error on outgoing MWI subscription (backport) (M16288) - link
- Deprecated: Asterisk could crash in case of an attended transfer (M20164) - link
Communication Server v.3.4.6 (intermediate version) Show release notesHide release notes
- Bugfix: Encode uri of "refer-to" field during the transfer (M15563) - link
- Bugfix: Set the connected line and the peer IP in "refer-to" field during the transfer (M15563) - link
- Deprecated: Asterisk could crash in case of an attended transfer (M20164) - link
Communication Server v.3.4.5 (intermediate version) Show release notesHide release notes
- Feature: Early Media Suppression (backport) (M13756) - link
- Deprecated: Asterisk could crash in case of an attended transfer (M20164) - link
Communication Server v.3.4.4 (intermediate version) Show release notesHide release notes
- Improvement: Never expose internal DNS aliases in outgoing registrations (backport) (M13244) - link
- Bugfix: The SIPTRANSFER_REFERER variable did not contain the complete refer-by header (backport) (M13750) - link
- Deprecated: Asterisk could crash in case of an attended transfer (M20164) - link
Communication Server v.3.4.3 (intermediate version) Show release notesHide release notes
- Feature: Subscribe to Message Waiting Indicator in EPA (M12076 Backport) (M11156) - link
- Feature: Custom internal DNS entry (M12728 Backport) - link
- Improvement: Reregister on DNS update (M12745 Backport) - link
- Improvement: Support out-of-order notify matching an outstanding subscription (M12076 Backport) (M11822) - link
- Improvement: Support incoming SIP REFER from Lync (M12617 Backport) - link
- Bugfix: FMU synchronization mechanism was not always working (M12627 Backport) - link
- Bugfix: Crash during the notify contact parsing (M12939) - link
Communication Server v.3.4.2 (intermediate version) Show release notesHide release notes
- Improvement: Added user=phone in From PAI, RPID and Diversion headers (Backport M11422) - link
- Bugfix: Incorrect domain in COLP PAI (Backport M11245) - link
- Bugfix: PAI should only provide sip uri format in output (Backport M11245) - link
- Bugfix: Diversion reason lost (Backport M11245) - link
- Bugfix: Avoid duplicating MWI subscriptions on reload (Backport M11156) - link
Communication Server v.3.4.1 (intermediate version) Show release notesHide release notes
- Feature: Support registering on multiple PBX using Abstracted Endpoint 2 (Backport M10273) (M10488) - link
- Improvement: Added the possibility to only trust the PAI header (Backport M10158) - link
- Improvement: Add privacy in diversion header(M10216) - link
- Improvement: Add the possibility to define maximum number of calls (M10477) - link
- Bugfix: Authorization header could be corrupted (M11005) - link
Communication Server v.3.4.0 (intermediate version) Show release notesHide release notes
- Improvement: Added the possibility to configure the outbound registration timeout (M9699) - link
- Improvement: Added the ability to modify SIP retransmission timers (M9720) - link
- Bugfix: When using the custom transfer via the ' *' the called was able to trigger the transfer (M9705) - link
- Bugfix: SIP trunks using sipsocket and qualify could stay stuck in unreachable mode (M9888) - link
- Bugfix: When receiving a maddr address we should not resolve the sent-by host in the via header (M9806) - link
- Bugfix: Deactivate defense daemon when switching to standby mode (M9721) - link
- Feature: Expanded support of message content-types when outside context of a call (M9875) - link
Communication Server v.3.3.15 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed destination number on TRANSFER event in queue log (M19497) - link
- Bugfix: Blind transfers were not logged properly in queue_log (M10886) - link
Communication Server v.3.3.14 (intermediate version) Show release notesHide release notes
- Improvement: In case of ringall ring directly member when they get available (M18271) - link
Communication Server v.3.3.13 (intermediate version) Show release notesHide release notes
- Bugfix: REINVITE with codec rordering were not propagated (backport) (M17405) - link
Communication Server v.3.3.12 (intermediate version) Show release notesHide release notes
- Bugfix: Prevent SDP-version-ignore in case of codec re-negotiation (Backport) (M15994) - link
SOP API
- SOP API v.4.14.0 Show release notesHide release notes
- Feature: Unlimited parameter size for speeddials (M14143) - link
- Bugfix: In case of ccOriginate from a number instead a phone, the context of the phone's ext must be used (M14727) - link
- Bugfix: CallHistory did not show the call with called in the plus E164 format (M14737) - link
SOP API v.4.13.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed dbAuthenticate running forever on cluster configuration (M14290) - link
- Bugfix: PUM login/logout API was not working with the module Polycom Phone Support 5.0 (M13628) - link
- Bugfix: ccOriginate was not possible on a resource inherited from a template resource (M14186) - link
- Bugfix: Fixed pumLogin and pumLogout Internal Server error (M13628) - link
SOP API v.4.13.0 (intermediate version) Show release notesHide release notes
- Feature: Allow cluster synchronization to run status change callflow (M13509) - link
- Improvement: Added the possibility to retrieve a single parameter and its raw value (M14164) - link
- Bugfix: It was not possible to leave a voicemail after using ccRecord (M13834) - link
- Bugfix: Fixed source filter in dbGetDirectoryInfo (M14128) - link
SOP API v.4.12.2 (intermediate version) Show release notesHide release notes
- Bugfix: Filtering on source, would return empty result (M12964) - link
- Bugfix: Call history was not set to UTC (M13309) - link
- Bugfix: Restore backward compatibility on lang parameter of dbGetProfileParametersLayout (M0)
SOP API v.4.12.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed profile parameter permissions (M12843) - link
- Bugfix: Regional language were rejected by dbGetProfileParametersLayout (M13123) - link
SOP API v.4.12.0 (intermediate version) Show release notesHide release notes
- Feature: Support of HASH parameters (M11613) - link
- Bugfix: Only select phones resources dbGetPhoneStatus (M11186) - link
- Bugfix: exten2 and context2 made optional in ccPark (M11552) - link
- Bugfix: ccOriginate doesn't accept + (M11571) - link
SOP API v.4.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for UEP 1.1.
- Bugfix: Reporting an error returns an error (M10941) - link
- Bugfix: Error when using contexts (M10960) - link
- Feature: Added context data (M10960) - link
- Improvement: Added sync_from field when querying user info (M11207) - link
SNMP Agent
- SNMP Agent v.3.10.0 Show release notesHide release notes
- Feature: Include finished calls passed during the last polling period in computation (M11435) - link
- Feature: Support of Dahdi Trunk (M9308) - link
- Bugfix: Fix false positive errors when installed on vsop (backport)(M12943) - link
SNMP Agent v.3.9.0 (intermediate version) Show release notesHide release notes
- Feature: Rating oriented probe to check connectivity (M13333) - link
- Feature: Rating oriented probe for monitoring daily rating (M13332) - link
- Improvement: Support internal error in Dialogic DSI probe (M13812) - link
- Bugfix: SNMP agent not restarting on vHost if other instances already running in vSOPs (M14218) - link
SNMP Agent v.3.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed error with dmidecode command on vsops (M0)
SNMP Agent v.3.8.0 (intermediate version) Show release notesHide release notes
- Feature: Add SNMP agents for monitoring HP hardware (Backport) (M12556) - link
- Feature: Added probe to monitor SOP cluster syncronization (Backport) (M112522) - link
- Improvement: SMPP queue monitoring (Backport) (M11421) - link
- Bugfix: Stopping snmpd on the vSOP host was causing the stop of snmpd on all vSOPs (Backport) (M9792) - link
SNMP Agent v.3.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: missing system dependencies
SNMP Agent v.3.7.0 (intermediate version) Show release notesHide release notes
- Improvement: Probes will never run longer than a fixed time anymore (M11688) - link
- Deprecated: Missing system dependencies
Application Management Server
- Application Management Server v.3.4.1 Show release notesHide release notes
- Improvement: Added the possibility to configure the activation or not of the logging (M14490) - link
- Bugfix: Mserver were generating too much logs (M13315) - link
- Bugfix: Attribute state were not saved with the original timestamp (M14732) - link
net.Console
net.Console v.3.8.0 (intermediate version) Show release notesHide release notes
- Feature: Set extra informations on call (M13662) - link
- Improvement: Support for SHA-512 and bcrypt password hashing (M9470) - link
net.Console v.3.7.0 (intermediate version) Show release notesHide release notes
- Feature: net.Console build with new translations DE, ES, IT. (M12497) - link
- Improvement: Updated default branding
Shell
Shell v.1.22.0 (intermediate version) Show release notesHide release notes
- Bugfix: Possibly shell injection issues fixed. (M12681) - link
- Feature: Added ll, grep and free command. (M12681) - link
- Bugfix: Access to unauthorized files prevented. (M12681) - link
- Feature: Allow some options for disk_usage, grep, free. (M12681) - link
- Feature: Added uptime information to system_info. (M12681) - link
- Feature: Allowed access to /tftpboot/ * and /etc/crond.d/ * files from sopcli (M12681) - link
- Bugfix: Add escaux shell to shells list (M13125) - link
- Deprecated: Shell plugins were not accessible for escaux user (Backport)(M13994) - link
Sounds
Sounds v.1.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: added missing prompt 'hour' in nl_BE and nl_NL (M13377) - link
- Bugfix: Fix incorrectly named files which could cause some prompts to be played in english (M13400) - link
Sounds v.1.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added new prompt for fr_BE, fr_FR, nl_BE, nl_NL, it_IT, es_ES, en_GB, de_DE (M12788) - link
Sounds v.1.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: Prompts are not removed at module reinstall/upgrade (M9938) - link
Sounds v.1.9.0 (intermediate version) Show release notesHide release notes
- Feature: Added the possibility to synchronize custom prompts from the SMP to the SOP (M9807) - link
- Deprecated: Custom prompts were removed in some cases when the module was reinstalled
Database Schema
Database Schema v.2.10.0 (intermediate version) Show release notesHide release notes
- Feature: Possibility to optimize the tables (backport) (M10409) - link
- Feature: Possibility to cleanup archived files (backport) (M10409) - link
Database Schema v.2.9.0 (intermediate version) Show release notesHide release notes
- Improvement: Add custom CDR fields (usertag and usernote) (Backport)(M13662) - link
- Bugfix: Decrease apply changes duration on smp level (Backport) (M14120) - link
Database Schema v.2.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Better cache serialization of data (Backport) (M13856) - link
Database Schema v.2.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: The total allowable size for "labels" is not limited anymore to 255 characters (M12550) - link
- Bugfix: Language in the translation catalog was truncated when defined regional language (M13109) - link
Database Schema v.2.7.0 (intermediate version) Show release notesHide release notes
- Improvement: Use correct encoding for instant messaging (M12334) - link
Database Schema v.2.6.0 (intermediate version) Show release notesHide release notes
- Feature: Support of HASH profile parameters (M11613) - link
- Improvement: Increase e_mail and email size (M10727) - link
Database Schema v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Split instant inbox into multiple tables (M11185) - link
- Feature: Allow to archive instant messages (M11193) - link
Database Schema v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Link user feedback to internal bugtracker (M10490) - link
- Bugfix: Increase attribute column size to 64 in attribute_state and attribute_log(M10714) - link
Unified Communication Model
- Unified Communication Model v.1.13.1 Show release notesHide release notes
- Bugfix: Phone status propagation in a cluster could fail (M0)
- Deprecated: Profile synchronization was not completely switched off (M18546) - link
Unified Communication Model v.1.13.0 (intermediate version) Show release notesHide release notes
- Feature: Allow netConsole to obtain language from the SOP (M12497) - link
- Deprecated: Profile synchronization was not completely switched off (M18546) - link
Unified Communication Model v.1.12.0 (intermediate version) Show release notesHide release notes
- Bugfix: External contact synchronization failed when one of the extension fields was NULL (M11393) - link
- Bugfix: Some password could result in invalid login (M0)
- Improvement: Evenly spread the load for recurrently scheduled tasks (M8018) - link
- Deprecated: Profile synchronization was not completely switched off (M18546) - link
Call Management
Call Management v.1.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed wrong CDR encoding (M13666) - link
Aastra Phone Support
Aastra Phone Support v.2.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Register a ZEROCONF user when no config is specified. (M9338) - link
- Feature: Added Mitel OMM System 6.1 (M13633) - link
Aastra Phone Support v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Add new Aastra phone 6737i (M10280) - link
Mail Server
System Base
- System Base v.1.12.0 Show release notesHide release notes
- Feature: Added support of extended speeddials in Fusion 3 (M15395) - link
- Bugfix: Installation of apt modules issue when mixed with non apt(Backport) (M14760) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Resource cleanup tool (M14313) - link
- Improvement: Added the ability to rotate logs file hourly (Backport) (M13315) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
Cisco ATA Support
Local Admin Password
Local Admin Password v.1.1.3 (intermediate version) Show release notesHide release notes
- Bugfix: Really remove password full administrative password changes (M15525) - link
Test SMP Connectivity
Test SMP Connectivity v.1.0.1 (intermediate version) Show release notesHide release notes
- Deprecated: outdated (M0)
net.Desktop
LDAP Server
LDAP Server v.1.7.2 (intermediate version) Show release notesHide release notes
- Bugfix: Some package were not installed properly after a reinstallation (M15021) - link
LDAP Server v.1.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: Exposed all documented attributes (M0)
LDAP Server v.1.7.0 (intermediate version) Show release notesHide release notes
- Bugfix: Remove old mapping on installation (M11734) - link
- Feature: Expose new attributes (M11734) - link
Polycom Phone Support
- Polycom Phone Support v.5.4.0 Show release notesHide release notes
- Improvement: Upgrade VVXs firmware version to 5.5.0 (M15891) - link
- Feature: Add support for VVX101, VVX201 (M15901) - link
- Feature: Add support for VVX101, VVX201, VVX301, VVX401, VVX411 (M15901) - link
- Deprecated: The firmware 5.5.0 offered in this release have several stability issue (M16654) - link
Polycom Phone Support v.5.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow provisioning to configure fail2ban (M14898) - link
Polycom Phone Support v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: Connect phones over internet (M14742) - link
- Feature: Fail2ban support (M14743) - link
- Bugfix: Fixed false error message (M0)
- Bugfix: Timezone was not always correct when the timezone name was provided in input (M14953) - link
Polycom Phone Support v.5.2.1 (intermediate version) Show release notesHide release notes
- Improvement: Adapted the timezone support (M12868) - link
Polycom Phone Support v.5.2.0 (intermediate version) Show release notesHide release notes
- Feature: Allow HTTP and HTTPS provisioning at the same time (M9905) - link
- Improvement: Register a ZEROCONF user when no config is specified (M9338) - link
- Bugfix: Checked installed Polycom Virtual Phone resources version to be > 1.12.0 and restored PUM functionality when updating Polycom Virtual Phone resources (M11599) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
New resource versions
- SIP Trunk
- SIP Trunk v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Inbound authentication user is now configurable (M11840) - link
- Feature: Allow overriding SIP URI domain (M11628) - link
- Feature: Symmetric Response Routing (M11628) - link
- Feature: Add notify format (M11907) - link
SIP Trunk v.1.55.1 (intermediate version) Show release notesHide release notes
- Bugfix: Some characters in register password were not accepted (TS-587)
SIP Trunk v.1.55.0 (intermediate version) Show release notesHide release notes
- Improvement: Number of call saved in configuration file for the new probe (Backport) (M13970) - link
Cisco SPA112
PolycomVVX101
PolycomVVX201
PolycomVVX301
PolycomVVX401
PolycomVVX311
PolycomVVX411
PolycomVVX410
PolycomVVX410 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomVVX410 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomVVX410 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomVVX410 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomVVX400
PolycomVVX400 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomVVX400 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomVVX400 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomVVX400 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomVVX310
PolycomVVX310 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomVVX310 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomVVX310 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomVVX310 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomVVX300
PolycomVVX300 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomVVX300 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomVVX300 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomVVX300 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomVVX500
PolycomVVX500 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomVVX500 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomVVX500 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomVVX500 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomVVX600
PolycomVVX600 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomVVX600 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomVVX600 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomVVX600 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP330
PolycomIP330 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP330 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP330 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP330 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP330 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
- Bugfix: Correct digitmap syntax in the provisioning file. (M0)
PolycomIP330 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP330 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP330 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP330 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP330 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP330 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP330 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP330 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP330 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomIP560
PolycomIP560 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP560 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP560 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP560 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP560 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP560 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP560 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP560 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP560 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP560 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP560 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP560 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP560 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP560 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomIP331
PolycomIP331 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP331 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP331 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP331 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP331 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP331 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP331 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP331 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP331 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP331 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP331 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP331 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP331 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP331 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22965) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22965) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: No voice after unhold when srtp is enable for IP series phones (M22965) - link
PolycomIP6000
PolycomIP6000 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP6000 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP6000 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP6000 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP6000 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP6000 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP6000 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP6000 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP6000 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP6000 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP6000 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP6000 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP6000 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP6000 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomIP650
PolycomIP650 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP650 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP650 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP650 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP650 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP650 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP650 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP650 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP650 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP650 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP650 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP650 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP650 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP650 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomIP450
PolycomIP450 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP450 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP450 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP450 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP450 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP450 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP450 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP450 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP450 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP450 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP450 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP450 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP450 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP450 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomIP670
PolycomIP670 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP670 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP670 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP670 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP670 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP670 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP670 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP670 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP670 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP670 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP670 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP670 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP670 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP670 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomIP550
PolycomIP550 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP550 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP550 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP550 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP550 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP550 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP550 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP550 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP550 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP550 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP550 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP550 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP550 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP550 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomIP7000
PolycomIP7000 v.5.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was impossible to disable Do Not Disturb functionality (M14433) - link
PolycomIP7000 v.5.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow custom SIP server port (M14770) - link
- Feature: Allow custom NTP server (M14742) - link
PolycomIP7000 v.5.3.0 (intermediate version) Show release notesHide release notes
- Feature: added support for user's regional language (M12720) - link
PolycomIP7000 v.5.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed Sync code misalignment. (M11547) - link
PolycomIP7000 v.5.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix video jitter buffer variables format in Polycom configuration file. (M11547) - link
PolycomIP7000 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomIP7000 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomIP7000 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomIP7000 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomIP7000 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomIP7000 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomIP7000 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomIP7000 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomIP7000 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
New action versions
- STARTDYNAMICAPPLICATION.8.4
- STARTDYNAMICAPPLICATION.8.4 v.1.0.0 Show release notesHide release notes
- Bugfix: Stop using deprecated app, restoring compatibility with CS 3.5+ (M11467) - link
- Improvement: User language support for Voicemail (M11574) - link
Included components
Modules
Resources
Actions
Version 3.4.5 - Early deployment Restricted release!
Release notes
- Bugfix: Updated High Availability module to make sure that DHCP leases were correctly synchronized in an Active-Standby setup (M13726) - link
- Bugfix: Updated Communication Server module to make sure Linear Queue RingStrategy is being activated without asterisk reboot needed (M13530) - link
- Bugfix: Updated Communication Server module to make sure core dumps are taken correctly (M13582) - link
- Bugfix: Updated System Base module as a dependency of Communication Server (M13582) - link
- Bugfix: Updated NTP Server module to remove false positieve errors when installing the module (M12942) - link
- Bugfix: Updated StartApplication in case FMU calls are used (M13683) - link
- Bugfix: Disabled call-recording in conference profile to safe disk space (M14080) - link
- Bugfix: Removed less-used optional modules in order to have clean setup (M14046) - link
- Bugfix: Removed less-used optional phone-resources in order to have clean setup (M14092) - link
- Bugfix: Updated Aastra Phone Support module in order to support OMM 5.0 (M14255) - link
- Bugfix: Added StartMessagingApplication to support future profiles (M14269) - link
- Bugfix: Updated callflow *200 in order to make sure that Blind Transfers were correctly handled by the OutgoingCallCatcher (M14247) - link
- Bugfix: Updated callflow *136 in order to make sure that Blind Transfers were correctly handled by the OutgoingCallCatcher (M14303) - link
- Bugfix: Updated Cisco SPA2102 in order to make sure that all configuration files or created on all sop's in the cluster (M14312) - link
- Bugfix: PUM login/logout was no longer possible via an API call (M13628) - link
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
High Availability
NTP server
System Base
- System Base v.1.10.1 Show release notesHide release notes
- Bugfix: Some scripts were not executable causing them to fail (M14144) - link
- Bugfix: Coredumps were not created in some cases (M13582) - link
- Bugfix: When doing rollback the configuration files were not restored (M14238) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.10.0 (intermediate version) Show release notesHide release notes
- Improvement: Move password generation to software sources module (Backport) (M0)
- Bugfix: Configuration management tool was not able to set a "0" value (Backport) (M0)
- Bugfix: There was a memory leak in the SMP connection daemon (Backport) (M13481) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.9.0 (intermediate version) Show release notesHide release notes
- Improvement: Added irqbalance daemon to spread interrupts across available CPU's (M12781) - link
- Bugfix: SOP based template processor did not work with new profile parameters (M12845) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.8.2 (intermediate version) Show release notesHide release notes
- Bugfix: DB sync could failed when syncing parameter values (M12762) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.8.1 (intermediate version) Show release notesHide release notes
- Bugfix: Included libtest-requires-perl dependency for libtest-sharedfork-perl (M0)
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.8.0 (intermediate version) Show release notesHide release notes
- Feature: Provide better password management through a tool (M11517) - link
- Bugfix: Fixed CVE-2014-0224 and CVE-2015-1793
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.7.1 (intermediate version) Show release notesHide release notes
- Bugfix: SSL/TLS weak MAC algorithms disabled (M11658) - link
- Bugfix: SSL/TLS server CBC mode ciphers disabled (M11658) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.7.0 (intermediate version) Show release notesHide release notes
- Feature: Support for SHA-2 when using STARTTLS (M11519) - link
- Bugfix: Upgraded OpenSSL to the latest version (M11273) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Dynamic start of ssh connection (M9996) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
FAX Server
- FAX Server v.2.3.2 Show release notesHide release notes
- Bugfix: Add additional supported content types for PDF files for email to fax - backport (M13793) - link
- Bugfix: Allow disabling the body of the message - backport (M13807) - link
Communication Server
Communication Server v.3.3.10 (intermediate version) Show release notesHide release notes
- Bugfix: Reload was needed to apply linear queue strategy (Backport M13530) - link
- Bugfix: When remote end sends a reinvite to change the codec, transcoding was not reinitialized (Backport M13624) - link
- Bugfix: When remote end answers to a reinvite with several codecs, the channel codec was not the first codec proposed in the SDP (Backport M13624) - link
Communication Server v.3.3.9 (intermediate version) Show release notesHide release notes
- Bugfix: recvonly was missing in the SDP of the SIP trunk when a sendonly was received (M13299) - link
- Bugfix: When remote end answers with several codecs many reinvite was sent (M13624) - link
- Bugfix: Maxcalls was not configurable (M13620) - link
SOP API
SOP API v.4.10.3 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed pumLogin and pumLogout method (Backport) (M13628) - link
New resource versions
New action versions
- STARTMESSAGINGAPPLICATION.1.0
Included components
Modules
Resources
Actions
Version 3.4.4 - General deployment Restricted release!
Release notes
- Bugfix: Updated DHCP Server module to remove visual errors (M13115) - link
- Improvement: Upgraded SipTrunk resource to support G.722 (M13268) - link
- Bugfix: Updated Queue resource to be compatible with queue action (M13724) - link
- Bugfix: Updated Queue action to be compatible with queue resource (M13724) - link
- Bugfix: Added StartApplication 3.2.0 in case FMU calls are used (M13683) - link
- Bugfix: Updated TFTP Server module in order to make block-size configurable (M13233) - link
- Bugfix: Updated Communication Server module in order to solve SIP Stack issue in special cases. (M13343) - link
- Bugfix: Updated AutoRecall action to make sure the callback function was working correctly. (M13548) - link
- Bugfix: Updated callflow *100 in order to have CFUTransferPrefix available if needed (M13295) - link
Special manual upgrade actions
| Action |
| Restart Asterisk |
| Restart Mserver |
Changed components
Show changed componentsHide changed components
New module versions
Communication Server
TFTP Server
TFTP Server v.3.1.3 (intermediate version) Show release notesHide release notes
- Improvement: Reduce module installation time on high latency networks (M8766) - link
TFTP Server v.3.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
New resource versions
SIP Trunk
SIP Trunk v.1.53.1 (intermediate version) Show release notesHide release notes
- Bugfix: When the Caller-ID method was set to 'P-Asserted-Id header', the Remote-Party-ID was also taken into account (M10158) - link
New action versions
- STARTAPPLICATION.3.2.0
- STARTAPPLICATION.3.2.0 v.1.0.0 Show release notesHide release notes
- Feature: Added the possibility to fork the cdr in order to get the new destination in the CDR (M10911) - link
- Improvement: Generates voicemail configuration only if the extension has a primary phone
Included components
Modules
Resources
Actions
Version 3.4.3 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by newer release
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
- ReportQDR
- ReportQDR v.1.7.0 Show release notesHide release notes
- Improvement: In addition to the Agent Device, also show the Agent Device Owner (M8722) - link
- Feature: allow to use "|" (OR) in filters
- Bugfix: Unable to list last agents due to empty combobox selections (M5516) - link
- Improvement: Make filters with OR operator work on more fields (M6597) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
- ReportQDR v.1.6.1 (intermediate version) Show release notesHide release notes
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.4.2 - Deprecated
Release notes
- Bugfix: Updated mail server to avoid big log files (M10966)
- Bugfix: Contacts folder is included via Webdav (M11966)
- Bugfix: The message to enter the conference bridges was unclair. (M11684)
- Improvement: Added the possibility to deactivate CFU without changing CFB via shortcode (85794). (M12282)
- Bugfix: Escaux Connect : You can choose some special characters ( like "-" (minus) ) for a user's password
- Deprecated: High load caused by mailserver (M11695)
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
- Mail Server
- Mail Server v.1.5.2 Show release notesHide release notes
- Bugfix: Drop emails if no postmaster is specified in the configuration (M10966 & M11695) - link
- Deprecated: Issues found with exim and postmaster redirection to /dev/null (see v1.5.3) (M0)
File Manager
File Manager v.1.4.8 (intermediate version) Show release notesHide release notes
- Improvement: Expose DAV network captures directory (M11068)
- Improvement: Expose server logs through DAV (M0)
Communication Server
- Communication Server v.3.3.7 Show release notesHide release notes
- Bugfix: Restored the old pincode prompt when joining a conference call - Backport (M11684)
- Deprecated: SIP stack blocked when remote end answers a reinvite with several codecs (M13343)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.4.1 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
| Action |
| Reboot SOP |
| Reboot all phones |
Changed components
Show changed componentsHide changed components
New module versions
NTP server v.1.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Compatibility with baseline 3
SNMP Agent
SNMP Agent v.3.6.0 (intermediate version) Show release notesHide release notes
- Feature: Support monitoring interface status for Sangoma PRI interfaces (M10388) - link
- Feature: Generic Callflow monitoring probe (M10262) - link
- Feature: Add probe for SMPP server (M10309) - link
- Improvement: Restart SNMP daemon when it has crashed (M10376) - link
- Improvement: Critical message for the DB Consistency probe (M0)
- Bugfix: Fix level computation issue and add more information in the message (M9647) - link
- Bugfix: vsop memory probe shows no graphs (actually it does but the limit is so high that the used is scaled down to become invisible) (M0)
- Bugfix: Generic CPU probe was not accurate on vSOPs (M0)
- Bugfix: The power supply temperature probe was not working properly on some HP DL360 G8 (M0)
SNMP Agent v.3.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix level computation issue and add more information in the message (M9647) - link
Database Schema
Cluster & SOP Active-Active Support
Cluster & SOP Active-Active Support v.1.8.0 (intermediate version) Show release notesHide release notes
- Feature: Support for synchronization of parameter sets (M8746) - link
- Bugfix: Prefere DSA host key algorithm with SSH peer connectivity (M9443) - link
- Feature: Added the ability to select either network interface to use for sychronization is eth0 or eth0 (M0)
- Bugfix: Profile parameter value size was limited to 255 characters (M10699) - link
- Bugfix: Problem in last synchronization timestamp (M11136) - link
- Deprecated: Synchronization of parameter set is not working (M14102) - link
Cluster & SOP Active-Active Support v.1.7.0 (intermediate version) Show release notesHide release notes
- Feature: Synchronization of profile parameters will now reconfigure the local phones when needed (M7940) - link
- Bugfix: Active-active queue management was not working properly
Communication Server
- Communication Server v.3.3.6 Show release notesHide release notes
- Improvement: All the allowed codecs are now proposed in the reinvite so that the remote peer should always accept the SDP (Backport M11604) - link
- Bugfix: Audio issue when REINVITE with specific codec is rejected by remote end (Backport M10416) - link
- Bugfix: Received REINVITE with new codec were not propagated (Backport M10416) - link
- Bugfix: It was not possible to transfer video call using dynamic payload such as H264 (Backport M8954) - link
- Bugfix: Video was not working when doing a dual ringing of a phone with support and other one without (Backport M9919) - link
- Deprecated: SIP stack blocked when remote end answers a reinvite with several codecs (M13343) - link
DHCP Server
FAX Server
Shell
- Shell v.1.21.1 Show release notesHide release notes
- Bugfix: Not possible to change the password in local admin password module on Baseline 3 (M9008) - link
- Bugfix: Removed the ability to shutdown or reboot sop via shortcut command (M11392) - link
- Bugfix: Full length of the password is now checked on Baseline 2 and 1 (M11476) - link
Shell v.1.21.0 (intermediate version) Show release notesHide release notes
- Improvement: Capture traffic on all interfaces (M11125) - link
Shell v.1.20.0 (intermediate version) Show release notesHide release notes
- Feature: Added diagnostic tools to CLI: system_info ntp_check_sync ntp_resync run_date trace disk_usage (M10394) - link
SOP API
New resource versions
PolycomVVX500
PolycomVVX500 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomVVX500 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomVVX500 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomVVX500 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX500 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX500 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomVVX500 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomVVX500 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomVVX500 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomVVX500 v.5.1.4 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomVVX600
PolycomVVX600 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomVVX600 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomVVX600 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomVVX600 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX600 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX600 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomVVX600 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomVVX600 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomVVX600 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomVVX600 v.5.1.4 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP6000
- PolycomIP6000 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP330
- PolycomIP330 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP550
- PolycomIP550 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP670
- PolycomIP670 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP650
- PolycomIP650 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP560
- PolycomIP560 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP331
- PolycomIP331 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP450
- PolycomIP450 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomIP7000
- PolycomIP7000 v.5.1.4 Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomVVX310
PolycomVVX310 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomVVX310 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomVVX310 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomVVX310 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX310 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX310 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomVVX310 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomVVX310 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomVVX310 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomVVX310 v.5.1.4 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomVVX400
PolycomVVX400 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomVVX400 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomVVX400 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomVVX400 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX400 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX400 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomVVX400 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomVVX400 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomVVX400 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomVVX400 v.5.1.4 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomVVX300
PolycomVVX300 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomVVX300 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomVVX300 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomVVX300 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX300 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX300 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomVVX300 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomVVX300 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomVVX300 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomVVX300 v.5.1.4 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
PolycomVVX410
PolycomVVX410 v.5.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
- Improvement: Add video jitter buffer variables. (M11547) - link
PolycomVVX410 v.5.15.1 (intermediate version) Show release notesHide release notes
- Feature: Support Polycoms on Steam with SBC (MCH-706)
PolycomVVX410 v.5.15.0 (intermediate version) Show release notesHide release notes
- Feature: Source SOP configuration and FMA support (PC-837)
PolycomVVX410 v.5.14.0 (intermediate version) Show release notesHide release notes
- Feature: added support for Polycom VVX 150 (PC-539)
PolycomVVX410 v.5.13.0 (intermediate version) Show release notesHide release notes
- Bugfix: force default no ringtone when BLF is triggered (TS-53)
- Feature: added support for Poly Trio 8500 (PC-347)
PolycomVVX410 v.5.12.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVX 250 (M25185) - link
PolycomVVX410 v.5.11.0 (intermediate version) Show release notesHide release notes
- Feature: Support for pickup on a BLF key (M19406) - link
PolycomVVX410 v.5.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: SRTP on video-enabled VVX (M22350) - link
PolycomVVX410 v.5.10.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for VVXD60 dect (M23150) - link
- Feature: Allow to set a fifth softkey on every VVX (M22569) - link
- Feature: Added support for Polycom IP450, IP550 over Internet (M23140) - link
- Improvement: Allow to adjust screen saver settings for every VVX (M23139) - link
- Improvement: Allow to select h264 video codec for VVX 500/501/600/601 (M22569) - link
- Improvement: Allow to adjust screen backlight settings for every VVX (M22978) (M22980) - link
- Bugfix: Now voice after unhold when srtp is enable for IP series phones (M22695) - link
PolycomVVX410 v.5.1.4 (intermediate version) Show release notesHide release notes
- Bugfix: Headset options were not taken into account by the resource. (M10735) - link
- Bugfix: Use real name as defined in the directory when label is not explicitly defined (M9709) - link
- Bugfix: Remove "uninitialized value" warnings when doing an apply change. (M11514) - link
SNOM320
SNOM320 v.3.13.0 (intermediate version) Show release notesHide release notes
- Feature: Configurable voicemail service extension. (M7747) - link
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.4.0 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Unified Communication Model
- Unified Communication Model v.1.11.0 Show release notesHide release notes
- Improvement: Do not store remote attributes to attribute_log, they are transmitted to the clients only (net.Desktop, net.Supervisor) (M9666) - link
- Improvement: Avoid storing attribute_logs when value (M9666) - link
- Improvement: Some scheduled tasks have been randomized in order to prevent load on vSOPs (M8018) - link
- Bugfix: default values could be incorrect when upgrading from a previous version and new options are available (M10261) - link
- Deprecated: Profile synchronization was not completely switched off (M18546) - link
Application Management Server
- Application Management Server v.3.4.0 Show release notesHide release notes
- Feature: Allow to select which attributes in the database to be sent to the clients. (M9666) - link
- Feature: Randomize cron jobs to avoid high load on VSOP host (M8018) - link
Call Management
FAX Server
- FAX Server v.2.3.0 Show release notesHide release notes
- Feature: When using a virtual fax extension combined with STARTDYNAMICAPPLICATION, you can now customize the header caller id using the fax Number. (M9668) - link
Escaux Connect
- Escaux Connect v.2.6.2 Show release notesHide release notes
- Bugfix: Do not clear the search value when using "back" button (M10312) - link
- Bugfix: Check that the "call device" adds a 0 for external numbers (M10314) - link
- Bugfix: Incorrect SIP URI shown in newly opened chat (M10315) - link
- Bugfix: Categorized WebRTC self-test feedbacks (M10316) - link
- Bugfix: Some calls do not appear in Call History (M10317) - link
- Bugfix: Contact details button is now disable when relevant (M10318) - link
- Bugfix: Play ringtone locally when needed (M10322) - link
- Bugfix: Show a desktop notification when receiving a call (M10323) - link
- Bugfix: Improve visual differentiation between contact types (M10325) - link
- Bugfix: Display more relevant search results first (M10327) - link
- Bugfix: Optimize directory speed when no input is entered (M10329) - link
- Bugfix: Silent Mode notification was not displayed correctly (M10410) - link
- Bugfix: Avoid accidental call pickup by the user while typing text (M10414) - link
- Bugfix: Normalize phone number when trying to match to a contact (M10438) - link
- Bugfix: Allow only one outgoing call (M10461) - link
- Bugfix: Not redirected to a random page after a call (M10321) - link
- Improvement: Prevent closing the page when a call is still ongoing (M10467) - link
Escaux Connect v.2.6.1 (intermediate version) Show release notesHide release notes
- Features: Lots of new features for net.Desktop replacement (M9508) - link
- Improvement: Added collaboration capability to chat (for camera & screen sharing) (M9871) - link
- Bugfix: Reduced amount of subscriptions generated (M9937) - link
- Bugfix: Various stability improvements (M10004) - link
- Bugfix: default values could be incorrect when upgrading from a previous version and new options are available. (M10261) - link
Escaux Connect v.2.6.0 (intermediate version) Show release notesHide release notes
- Improvement: New implementation of directory module using the card dav protocol (M9677) - link
- Improvement: New implementation of chat module (M9827) - link
- Improvement: Integration of Escaux Connect Companion (M9733) - link
Escaux Connect v.2.5.16 (intermediate version) Show release notesHide release notes
- Bugfix: case-sensitive issue with voicemail field (FMG-1072)
Escaux Connect v.2.5.15 (intermediate version) Show release notesHide release notes
- Improvement: Support national number format on login (FMG-958)
- Bugfix: Issue on first configuration (FMG-958)
Escaux Connect v.2.5.14 (intermediate version) Show release notesHide release notes
- Improvement: Add app on android home screen (FMG-958)
- Improvement: Enlarge hamburger menu (FMG-864)
- Bugfix: Issue to customize main button (FMG-0)
Escaux Connect v.2.5.13 (intermediate version) Show release notesHide release notes
- Feature: Support enumstring profile parameter component (FMG-809)
Escaux Connect v.2.5.12 (intermediate version) Show release notesHide release notes
- Feature: Status permissions levels (M20013) - link
- Feature: Profile parameters shortcuts in the dashboard (M20014) - link
- Feature: Custom status icon (M20440) - link
Escaux Connect v.2.5.11 (intermediate version) Show release notesHide release notes
- Bugfix: Click to dial was not possible when CallModule was not enabled (M17916) - link
- Bugfix: Added the new official background (M17916) - link
Escaux Connect v.2.5.10 (intermediate version) Show release notesHide release notes
- Improvement: Added translations for the generated MAIN menu (M14939) - link
- Deprecated: Rights expired for background image (M17916) - link
Escaux Connect v.2.5.9 (intermediate version) Show release notesHide release notes
- Improvement: Use SMP password policy and display proper error message (M14685) - link
- Bugfix: Forgot password issue on iOS9 devices (M0014705) - link
- Bugfix: Remove installation issue (M15589) - link
- Deprecated: Rights expired for background image (M17916) - link
Escaux Connect v.2.5.8 (intermediate version) Show release notesHide release notes
- Feature: Make reset password configurable (M12953) - link
- Feature: Allow to use icons as intentional status (M13762) - link
- Deprecated: Rights expired for background image (M17916) - link
Escaux Connect v.2.5.7 (intermediate version) Show release notesHide release notes
- Improvement: Escaux connect: if there is only one category, skip it (M13277) - link
- Deprecated: Not used in production. (M0)
Escaux Connect v.2.5.6 (intermediate version) Show release notesHide release notes
- Bugfix: On Internet explorer, do not select as favorite when pressing enter (M0011782) - link
- Deprecated: Rights expired for background image (M17916) - link
Escaux Connect v.2.5.5 (intermediate version) Show release notesHide release notes
- Bugfix: On Internet Explorer 10 and below you would get logged out when pressing enter after searching for a contact (M11782) - link
- Deprecated: Rights expired for background image (M17916) - link
Escaux Connect v.2.5.4 (intermediate version) Show release notesHide release notes
- Bugfix: Empty language in profile parameter triggers error (M10950) - link
- Deprecated: Rights expired for background image (M17916) - link
New resource versions
Unified End Point SIP peer
New action versions
- STARTFAXAPPLICATION.3.12
- STARTFAXAPPLICATION.3.12 v.3.12.0 Show release notesHide release notes
- Bugfix: Invalid extension would impact other extensions (M7875) - link
- Improvement: Configured fax number in fax extension no longer used to avoid loops (M0)
- Feature: Expose Fax Number field as Caller ID number in the fax header for email to fax (M9668) - link
STARTAPPLICATION.3.1.1
- STARTAPPLICATION.3.1.1 v.1.0.0 Show release notesHide release notes
- Feature: Save called number into a variable LastCalledNumber (M8941) - link
- Feature: Save called context into a variable LastCalledContext (M8941) - link
STARTDYNAMICAPPLICATION.8.3
Included components
Modules
Resources
Actions
Version 3.3.1 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
Watchdog
SOP API
Escaux Connect
FAX Server
DHCP Server
DHCP Server v.2.4.2 (intermediate version) Show release notesHide release notes
- Bugfix: Default values could be incorrect when upgrading from a previous version and new options are available. (M10261) - link
- Improvement: When installing the module unconfigured, the install failure message is now more explicit (M9975) - link
New resource versions
PolycomIP6000
PolycomIP330
PolycomIP550
PolycomIP670
PolycomIP650
PolycomIP560
PolycomIP450
PolycomIP7000
PolycomVVX500
PolycomVVX310
PolycomVVX400
PolycomVVX300
PolycomVVX410
PolycomVVX600
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.3.0 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
| Action |
| Restart Asterisk |
| Reinstall net.Dektop |
| Reboot all phones |
Changed components
Show changed componentsHide changed components
New module versions
- Cluster & SOP Active-Active Support
- Cluster & SOP Active-Active Support v.1.6.0 Show release notesHide release notes
- Feature: Synchronize dynamic profile parameters (M7498) - link
- Bugfix: Queue synchronization was not working for Communication Server module (M6696) - link
Mail Server
Codec G.729 Annex A
net.Buzz
- net.Buzz v.1.4.0 Show release notesHide release notes
- Feature: Enabled IM/Presence by default (M8035) - link
- Feature: Configurable voicemail extension (M8770) - link
- Limitation: The option "Hide my number" doesn't result in a hidden number. Workaround: hide the number through a callflow. (M9347) - link
- Limitation: The online status dropdown is shown but should be disregarded. (M9347) - link
- Limitation: Hiding the intentional status through "Preferences > Privacy" doesn't work. (M9347) - link
- Limitation: Transferring/holding video calls can in some cases lead to unexpected application behavior. Workaround: Initiate a voice call instead. (M9350) - link
net.Buzz v.1.3.0 (intermediate version) Show release notesHide release notes
- Feature: Provides net.Buzz 3.5.4.0 build 70924
- Improvement: Add computerid and build parameter to logging (M6388) - link
- Improvement: Support video calls (M6601) - link
- Bugfix: License key was visible (M6411) - link
- Bugfix: net.Buzz freezes when using invalid LDAP configuration (M6387) - link
System Status
System Status v.2.3.2 (intermediate version) Show release notesHide release notes
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
Database Server
Database Server v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: do not write parent DB password to child SMP's database.ini (MS-299)
Database Server v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Add administrative user to manage databases.
- Feature: Automatically repair crashed tables when the database server starts up. (M6858) - link
- Potential update impact level 2
: in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: New default behaviour is to automatically check and repair all databases. This can considerably increase startup time when it is used on large databases. Some applications may behave erratically while this check is running.
Database Server v.2.3.3 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed symbolic link issue of libhtml-template-perl package (M0)
Database Server v.2.3.2 (intermediate version) Show release notesHide release notes
- Improvement: Backport of Database Restore shell plugin (M0)
Database Server v.2.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
Database Server v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: Compatibility with Baseline 3 (M6026) - link
- Feature: Timezone support
Dahdi
Sounds
Sounds v.1.8.5 (intermediate version) Show release notesHide release notes
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
High Availability
- High Availability v.2.8.0 Show release notesHide release notes
- Feature: Added support for parameter sets synchronization (M8746) - link
- Feature: Added command line interface to control the HA switch (M8337) - link
- Bugfix: Added missing file for communication server modules syncronization (M8602) - link
- Bugfix: Voicemails were not synced for communication server modules (M8602) - link
- Bugfix: Fixed incomplete syncronization of Profile Parameters between active and standby sops (M8674) - link
- Bugfix: HA switch mode broken in Shell plugin (M9552) - link
Watchdog
Watchdog v.1.3.0 (intermediate version) Show release notesHide release notes
- Improvement: Reduce module installation time on high latency networks (M8766) - link
Watchdog v.1.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
Application Management Server
Application Management Server v.3.3.8 (intermediate version) Show release notesHide release notes
- Improvement: Detect more accurately the size of the log for rotation (M9015) - link
Application Management Server v.3.3.7 (intermediate version) Show release notesHide release notes
- Bugfix: mserver wasn't launching a syncbundles automatically at startup (M7977) - link
Call Management
Call Management v.1.7.4 (intermediate version) Show release notesHide release notes
- Improvement: User events are now monitored by call management, its allows to remove dialplan events on the asterisk manager (M9015) - link
FAX Server
FAX Server v.2.2.3 (intermediate version) Show release notesHide release notes
- Feature: Caller ID name and Caller ID number is now set to whatever is set in the module when sending a fax. (M6769) - link
- Bugfix: When number of phones was set to 0, a wrong value was created in the configuration file (M7977) - link
- Improvement: Make email dispatching more robust to invalid characters (M7875) - link
FAX Server v.2.2.2 (intermediate version) Show release notesHide release notes
- Bugfix: Some packages were copied to the wrong installation directory
- Bugfix: Charset not correctly recognized with some mail clients
- Bugfix: Octet-stream not correctly recognized
FAX Server v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Characters encoding not correctly recognized (M7487) - link
- Feature: Support of octet-stream for mail-to-fax attached PDFs (M0)
FAX Server v.2.2.0 (intermediate version) Show release notesHide release notes
- Bugfix: Special characters not correctly transcoded in html and plain/text documents(M7334) - link
Thomson Phone Support
- Thomson Phone Support v.1.5.1 Show release notesHide release notes
- Bugfix: Old configuration files were not deleted correctly after an apply changes (M8764) - link
- Bugfix: Special characters breaks corporate directory (M9450) - link
Thomson Phone Support v.1.5.0 (intermediate version) Show release notesHide release notes
- Feature: Firmware upgrade to 2.78 for ST2030 to fix transfer through corporate directory (M8619) - link
Thomson Phone Support v.1.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: add missing dsp firmware file for ST2022.
Thomson Phone Support v.1.4.0 (intermediate version) Show release notesHide release notes
- Improvement: Firmware upgrade to 1.66 for st2030 (M8153) - link
- Improvement: Firmware upgrade to 3.66 for st2022 (M8024) - link
- Bugfix: Right encoding for the directory search results (M8275) - link
Thomson Phone Support v.1.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Configuration files were not generated
Thomson Phone Support v.1.3.0 (intermediate version) Show release notesHide release notes
- NEVER TO BE RELEASED : Phone API is broken : see 1.3.1 instead.
- locked
- Added phone driver to allow configuration reload from the SOP (M7835) - link
Web Server
- Web Server v.1.2.3 Show release notesHide release notes
- Bugfix: Increase serial number of issued certificates when the database holds a higher serial number. (M9333) - link
- Bugfix: Enabled PHP garbage collection of session files. (M9425) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.2.2 (intermediate version) Show release notesHide release notes
- Feature: allow restricted Subject Alternative Names to be configured.
- Improvement: Use 2048 bit key length to generate certificates.
- Bugfix: The shared ssl serial file was used instead of 1 serial file per SOP.
- Bugfix: Be more tolerant against re-installing the SMP.
- Bugfix: The certificate chain was not generated correctly for multiple SMP levels.
- Bugfix: The certificate validity parameter was not taken into account.
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
Web Server v.1.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Upload limit was too strict (M7850) - link
- Deprecated: Impossible to start Apache due to mismatch between certificate and certificate key (M0)
Web Server v.1.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Change default upload value of php to 10 MB (M7212) - link
- Feature: Possibility to authenticate based on web application session (M7435) - link
- Feature: It is now possible to reinstall the module without overwriting existing certificates
- Deprecated: Upload limit was too strict for bulk admin (M7850) - link
Aastra Phone Support
System Base
- System Base v.1.5.0 Show release notesHide release notes
- Feature: CGIRPC - Implements parallel GET request with asynchronous HTTP library (M9135) - link
- Bugfix: Fixed installation issue when the logfile was not present - clean install (M0)
- Improvement: added up to date version of compression library (M0)
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.4.5 (intermediate version) Show release notesHide release notes
- Bugfix: Dependency issue with baseline 2.6 (M23979) - link
System Base v.1.4.4 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed installation issue when the logfile was not present (clean install)
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
net.Desktop
Database Schema
- Database Schema v.2.3.0 Show release notesHide release notes
- Feature: Added a user_feedback table in cdrdb (M9434) - link
- Feature: New SMS API status in cdrdb (M8857) - link
- Improvement: add field for more secure password storage (M6386) - link
- Feature: Added tables for carddav caching (M9865) - link
- Bugfix: default values could be incorrect when upgrading from a previous version and new options are available. (M10261) - link
Database Schema v.2.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: Baseline 1 compatibility. (M10865) - link
Database Schema v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Support new profile parameter types (M8737) - link
- Feature: Support for roles (M8870) - link
- Improvement: added indexes on home and mobile number fiels of the directory table (M8972) - link
- Improvement: Increase size of accountcode to 255 characters (M9264) - link
- Improvement: DB monitor process without limitation of records per day (M9079) - link
Database Schema v.2.1.1 (intermediate version) Show release notesHide release notes
- Improvement: Removed dependency on baseline 2. Profile parameters on baseline 1 are limited to 255 characters
- Improvement: SyncCDRDB would not synchronize when reinstalling a SOP. (M8118) - link
- Improvement: Reduce module installation time on high latency networks (M8766) - link
- Bugfix: DB Monitor does not work correctly when history to keep is greater than 12 months (M8057) - link
- Bugfix: Context not synced when swapping the name of two contexts (M8285) - link
- Limitation: Profile parameters on baseline 1 are limited to 255 characters.
Database Schema v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: User column added to attribute log (M7502) - link
- Improvement: Avoid starting the scheduled task at the same minute for each VSOP(M7978) - link
Database Schema v.2.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Increased size of profile parameters from 255 to 1024 characters (also requires SMP >= 5.0.0) (M7885) - link
Database Schema v.1.28.0 (intermediate version) Show release notesHide release notes
- Bugfix: Increase size of account code field in CDR to 255 characters (M9264) - link
SOP API
- SOP API v.4.10.0 Show release notesHide release notes
- Feature: Added dbAddFeedback that collects feedback from users (M9434) - link
- Feature: Added dbGetTimezone that gives the current time zone of the SOP (M9551) - link
- Feature: Added dbGetUser that gives optimized information about a user for ESCAUX Connect (M9676) - link
- Feature: Added pumLogin and pumLogout that allow to connect and disconnect extension with PUM enabled on a given phone (M9738) - link
- Feature: dbCheckPinCode & dbGetParkedChannels can now be called through the network (M9372) - link
- Feature: Added error trace to feedback (M0)
- Feature: Added the API ccGetVar (M9501) - link
- Bugfix: dbSetProfile API call would not change intentional status if the context was not provided. Now, the default context is "1" (M9730) - link
- Bugfix: default values could be incorrect when upgrading from a previous version and new options are available (M10261) - link
- Bugfix: Close remote api access security breach in dbGetMConnectProvisioning (M10442) - link
SOP API v.4.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: Correct the API dbSetProfile method (M9676) - link
SOP API v.4.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support for new profile parameter types (M8737) - link
- Feature: Return outgoing number in dbGetDirectoryInfo (M8821) - link
- Feature: Return extension's context name in dbGetDirectoryInfo (M8755) - link
- Improvement: Allow local channels for ccHangup (M9064) - link
- Bugfix: Set user when X-REMOTE-USER is given
- Improvement: Allow ccRedirect on channels whose current user is participating (M9112) - link
- Improvement: dbGetCallHistory can now output in JSON (M9114) - link
- Bugfix: Take context_id into account when updating profile status
- Bugfix: Queue call counters in net.Supervisor were not updated properly in some cases (M9261) - link
- Deprecated: The API dbSetProfile method failed silently (M9676) - link
SOP API v.4.8.1 (intermediate version) Show release notesHide release notes
- Improvement: Added a new "local_only" parameter to dbGetDirectoryInfo to only fetch directory of local SOP (M8646) - link
SOP API v.4.8.0 (intermediate version) Show release notesHide release notes
- Feature: Forward API requests when "mc_api_forwarding_server" is given (M8626) - link
- Feature: Return extension's SOPKEYs and IPs (M8626) - link
SOP API v.4.7.1 (intermediate version) Show release notesHide release notes
- Improvement: Allow star character ( *) and hash character (#) in profile parameters (M8587) - link
SOP API v.4.7.0 (intermediate version) Show release notesHide release notes
- Feature: provisioning call for m.Connect (M8103) - link
- Improvement: Avoid starting the scheduled task at the same minute for each VSOP (M7978) - link
- Improvement: Allow phone pattern to be given to ccPhoneReboot (M8415) - link
- Improvement: Do not return net.PBX contacts when source is set to something else (M8428) - link
- Bugfix: Allow accented characters in the values of profile parameters (M8387) - link
SOP API v.4.6.0 (intermediate version) Show release notesHide release notes
- Feature: Log user responsible for profile parameter or status change into attribute log (M7502) - link
- Feature: Exposed the parameter 'filename' for ccRecord API (M7961) - link
SOP API v.4.5.0 (intermediate version) Show release notesHide release notes
- Bugfix: Attempting reboot of an unsupported phone reported success instead of reporting failure (M7890) - link
- Feature: Requests to the API are now propagated to the other SOP in case of active-active (M7940) - link
- Feature: dbGetDirectoryInfo now returns contacts imported through UC Model (M7749) - link
DHCP Server
- DHCP Server v.2.4.1 Show release notesHide release notes
- Bugfix: DHCP configuration was not generated on the standby SOPs after an apply-change
- Bugfix: DHCP server was started on standby clone after the reinstallation of the module
DHCP Server v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to ignore config without writing the network definition in the configuration file (M8150) - link
- Feature: Correctly generating error files for the DHCP configuration probe (M8495) - link
- Bugfix: Configuration was not correctly generated when putting phone in different VLAN than SOPs with other default gateway (M8410) - link
- Improvement: Reduce module installation time on high latency networks (M8766) - link
Escaux Connect
- Escaux Connect v.2.5.2 Show release notesHide release notes
- Bugfix: Fixed DTMF (M9550) - link
- Feature: Use timezones from the SOP and user's browser to display right dates in callhistory (M9551) - link
- Improvement: Split packages between web application and Windows installer (M9817) - link
- Bugfix: Call pickup tooltip not correctly translated (M10627) - link
- Bugfix: Call history is displayed correctly when last call seen (M10628) - link
- Deprecated: Rights expired for background image (M17916) - link
Network
Network v.1.21.1 (intermediate version) Show release notesHide release notes
- To the person thinking of deploying this module to ED: The network module has been a source of headache for our support team as it has been riddled with bugs. Before you deploy it to ED, make sure
- - you have tested it with ALL currently supported baselines/kernels
- - you verify that the interfaces are correctly configured and that the routes are set
- - the documentation is complete
- - the dependencies are complete and correct
- -- JMA 20140910
- Bugfix: Routes were not generated properly on standalone sops (M9262) - link
- BUgfix: Correctly generate /etc/hosts file to make sudo command work correctly (M9201) - link
Network v.1.21.0 (intermediate version) Show release notesHide release notes
- Feature: Added the possibility to configure IP aliases on ethX interfaces.
- Deprecated: Routes not correctly configured on a standalone sop (M9262) - link
File Manager
File Manager v.1.4.6 (intermediate version) Show release notesHide release notes
- Bugfix: Exposed record calls for WebDav access (M3015) - link
File Manager v.1.4.5 (intermediate version) Show release notesHide release notes
- Improvement: Reduce module installation time on high latency networks (M8766) - link
File Manager v.1.4.4 (intermediate version) Show release notesHide release notes
- Bugfix: Ensure right permissions are applied on existing files (M4021) - link
- Bugfix: Uploaded files were incorrectly renamed (M7930) - link
- Improvement: Added a root directory in the webdav management (M8148) - link
- Improvement: Exposed the call recordings in webdav (M0)
File Manager v.1.4.3 (intermediate version) Show release notesHide release notes
- Improvement: Adding uploads directory (M5930) - link
Polycom Phone Support
- Polycom Phone Support v.5.1.1 Show release notesHide release notes
- Bugfix: In case of upgrade the default value for 'Daylight Savings Time: month to stop' was not set to 'October' (M9681) - link
- Bugfix: Remote reboot was not possible after changing the admin password (M10071) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
SNMP Agent
- SNMP Agent v.3.5.0 Show release notesHide release notes
- Feature: New probe to monitor the Dialogic stack (M9647) - link
- Bugfix: Incorrect swap value for generic (vsop) memory probe (M9946) - link
- Bugfix: Clean the file probe_oids when no probes are configured (M9816) - link
SNMP Agent v.3.4.6 (intermediate version) Show release notesHide release notes
- Bugfix: Hardware monitoring of HP Gen9 servers was not working on baseline3 (M24174) - link
SNMP Agent v.3.4.5 (intermediate version) Show release notesHide release notes
- Bugfix: Compatibility with HP Gen9 servers (M19021) - link
- Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality.: This removes support for monitoring of the Power Supply Temperatures (M19021) - link
SNMP Agent v.3.4.4 (intermediate version) Show release notesHide release notes
- Bugfix: PRI probe for Sangoma NetBorder PRI interfaces could only monitor the first interface (M9634) - link
LDAP Synchronization
LDAP Synchronization v.1.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: Add missing dependencies (hmac and sha1 libs) (M9686) - link
- Bugfix: Package bugfix of "cn=" (M9686) - link
- Bugfix: The fax number and the home number were inverted
- Bugfix: Synchronize home number (M9567) - link
LDAP Synchronization v.1.10.0 (intermediate version) Show release notesHide release notes
- Feature: Synchronize the callflow from an ldap attribute (M3299) - link
- Improvement: Extend OpenLDAP login option (M4330) - link
- Bugfix: Username with underscore was not allowed for authenticating user (M5936) - link
- Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: If the callflow ldap property parameter is set, the callflows of the extensions will be synchronized each time the ldap sync task is executed. Leave the callflow property field empty to retain the old behaviour.
Communication Server
- Communication Server v.3.3.5 Show release notesHide release notes
- Bugfix: Process could crash when the action SetRemoteVar was used on a IAX channel (Backport M10064) - link
- Bugfix: SIP trunks using sipsocket and qualify could stay stuck in unreachable mode (Backport M9888) - link
Communication Server v.3.3.4 (intermediate version) Show release notesHide release notes
- Bugfix: Don't start asterisk when sipsocket fails to bind (Backport of M9934) - link
- Bugfix: Process could have crashed when detecting afax tone (Backport of M10100) - link
Communication Server v.3.3.3 (intermediate version) Show release notesHide release notes
- Bugfix: Security upgrade of libssl for WebRTC (M9639) - link
- Bugfix: Video not stopped when call is put on hold (M9350) - link
Communication Server v.3.3.2 (intermediate version) Show release notesHide release notes
- Improvement: Add person activity to presence notify (M9371) - link
- Improvement: The channel variable FORWARD_CHANNEL is now set when the Dial Asterisk Options 'i' is used (M9390) - link
- Bugfix: Leftover presence channels could stay in the channels list (M9545) - link
- Bugfix: Video not stopped when call is put on hold (M9350) - link
- Deprecated: Crash when putting a call on hold (M9350) - link
Communication Server v.3.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Set the correct RTP source address when using SIP sockets (M9305) - link
Communication Server v.3.3.0 (intermediate version) Show release notesHide release notes
- Improvement: Propagate hangup cause on CANCEL messages (M9224) - link
- Improvement: Smaller MTU for DTLS handshake (M9320) - link
- Bugfix: Increase size of account code field in CDR to 255 characters (M9264) - link
- Bugfix: The music on Hold was not stopped after the call transfer to a queue's agent (M7492) - link
Communication Server v.3.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: When using the custom transfer via the ' *' the called was able to trigger the transfer (Backport) (M9705) - link
Communication Server v.3.2.0 (intermediate version) Show release notesHide release notes
- Feature: Add WebRTC support (M8955) - link
- Feature: Add DTLS-SRTP support for WebRTC in Firefox and newer Chrome (M8767) - link
- Feature: ICE and RTP configuration to work behind NAT (M9117) - link
- Feature: Notify m.Connect when a registration is overwritten (M8893) - link
- Feature: New action Subscribe usable in callflows (M8676) - link
- Feature: Notify presence events to m.Connect (M8677) - link
- Feature: Allow voicemail configuration per extension (M8780) - link
- Improvement: Reduce module installation time on high latency networks (M8766) - link
- Improvement: Prevent asterisk to start without binding on requested SIP or IAX addresses (M8732) - link
- Improvement: Prevent uncontrolled growth of log files (M8400) - link
- Improvement: Avoid blocking indefinitely on FastAGI callflow actions (M7462) - link
- Improvement: Latest security fixes (M9027) - link
- Improvement: Asterisk reload was slow when using several thousands global variables (M8855) - link
- Improvement: Unused configuration global variables were not removed upon reload (M9062) - link
- Improvement: Added the possibility to deactivate the Jitter Buffer when bridging two IAX channels (M8083) - link
- Improvement: Added the possibility to configure the maximum number of simultaneous calls (M9139) - link
- Bugfix: There was a one way audio issue when dynamic feature and direct rtp setup were used Together (M8964) - link
- Bugfix: The custom DTMF based call transfer was not woring since version 3.0 (M9084) - link
- Bugfix: Video was wrongly offered in outgoing invite even when caller did not support it (M8050) - link
- Bugfix: Activating the Jitter Buffer and the IAX trunking was causing audio quality issue (M8083) - link
- Bugfix: There was a one way audio when calling a device which answers with two codecs and when DirectMedia is disabled (M9083) - link
- Bugfix: No Directmedia when calling a phone in G729 only via a Queue and when the caller supports COLP (M9083) - link
- Bugfix: The SDP in the OK could be different from the SDP provided in the provisional call progress (M9083) - link
- Bugfix: The process could crash when confirming an attened transfer while the consulted destination was still ringing (M9130) - link
- Bugfix: Fixed memory leak which occured when making call and answering them (M9202) - link
- Bugfix: Additional SIP sockets were not compatible with dynamic address on a SIP trunk (M9187) - link
- Bugfix: There was stale channels when using the DTMF based call transfer (M9292) - link
Communication Server v.3.1.0 (intermediate version) Show release notesHide release notes
- Feature: Support for preferred devices in Queues (M5968) - link
- Feature: Configurable email return-path header (M2601) - link
- Feature: Support for remote party presence/extended presence (M7384) - link
- Feature: Voicemail with less options (M8032) - link
- Feature: Detection of voicemail outcome: minimum length and maximum silence of voicemails are now configurable (M7996) - link
- Feature: Add video support on Communication Server 3 (M7912) - link
- Improvement: Use escaux-minutely for minutely cronjobs (M7759) - link
- Improvement: Register to a remote peer when using a SIP socket (M7903) - link
- Improvement: Add a timeout for external scripts (AGI) (M7462) - link
- Bugfix: Parsing of "Additional SIP sockets" was not working in some cases, with multiple adresses (M7903) - link
- Bugfix: In some call transfer scenarios old mediastreams could remain in the list (M7489) - link
- Bugfix: Disabling voicemail to e-mail was not possible
- Bugfix: Hangup cause was not always propagated by the Dial application (M8129) - link
- Bugfix: Reason header was not parsed in the Bye message (M8129) - link
- Bugfix: Asterisk was stopping trying to register SIP Trunks after receiving a 403 (M7917) - link
- Bugfix: An invalid host value for a peer could not be corrected by a reload (M8144) - link
- Bugfix: The variable SIP_CODEC was not taken into account for inbound call (M8388) - link
- Bugfix: No ringback tone when dialing a phone with a new codec after answering a call (M8257) - link
- Bugfix: Multi-codec issue when dynamic feature or recording is used (M6921) - link
- Bugfix: In a multi codec environment the reinvite was not always sent to set up the call in peer to peer
- Bugfix: Originate failed because the macro could loose their context (M8463) - link
- Improvement: Register to a remote peer when using a SIP socket (M7903) - link
- Bugfix: Parsing of "Additional SIP sockets" was not working in some cases, with multiple adresses (M7903) - link
- Bugfix: In some call transfer scenarios old mediastreams could remain in the list (M7489) - link
- Bugfix: Disabling email to voicemail was not possible (M0)
- Bugfix: The iax trunk frequency set did not always match the one configured (M8044) - link
- Bugfix: The process could crash after a reinvite (M9024) - link
- Limitation: When using H264 and DirectMedia together, video stream might not be working after a call transfer (M9087) - link
- Deprecated: Higher versions provide significant improvements (M0)
Communication Server v.3.0.5 (intermediate version) Show release notesHide release notes
- Bugfix: Memory leak in advanced codec negotiation (M8552) - link
- Deprecated: Higher versions provide significant improvements (M0)
Communication Server v.3.0.4 (intermediate version) Show release notesHide release notes
- Feature: Setting specific channel variables with SIP INFO messages (M7712) - link
- Deprecated: Higher versions provide significant improvements (M0)
Communication Server v.3.0.3 (intermediate version) Show release notesHide release notes
- Feature: Add SIP overload control and blacklist (M7539) - link
- Bugfix: Memory leak and locking problems in external notify (M7648) - link
- Bugfix: Potential crash in external notify (M7479) - link
- Bugfix: Potential crash in net.Console support due to race condition (M7731) - link
- Bugfix: Add missing config file for T.38 support
- Deprecated: Higher versions provide significant improvements (M0)
Communication Server v.3.0.2 (intermediate version) Show release notesHide release notes
- Bugfix: Put chan_dahdi in a separate package (M7640) - link
- Deprecated: Higher versions provide significant improvements (M0)
Communication Server v.3.0.1 (intermediate version) Show release notesHide release notes
- Bugfixc: Port codec negotiation patch to asterisk 11 (M7344) - link
- Deprecated: Higher versions provide significant imporvements (M0)
Communication Server v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Limited support for SS7 (M6919) - link
- Improvement: Conference without a dependency on Dahdi (M7345) - link
- Deprecated: Higher versions provide significant imporvements (M0)
Communication Server v.2.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: MWI notification stays after voicemail deletion (backport) (M15652) - link
Communication Server v.2.10.0 (intermediate version) Show release notesHide release notes
- Feature: Activation of RTP probation to prevent some one way audio issue (M12797) - link
Communication Server v.2.9.1 (intermediate version) Show release notesHide release notes
- Bugfix: There was a performance issue when looking for global variables (M11983) - link
- Bugfix: escall was not working when ulaw was not configured in the module
- Bugfix: process could crash or be stuck in a deadlock when a chain of local channels was created (M12025) - link
- Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: This release breaks compatibility with older versions of the Call Management module, the SOP API module, the Application Management Server module and the StartDynamicApplication application selector. Please carefully verify the dependencies before upgrading
Communication Server v.2.9.0 (intermediate version) Show release notesHide release notes
- Improvement: Globals are now indexed on asterisk 1.8 (M9561) - link
- Improvement: Added the ability to modify timers (M9720) - link
- Bugfix: Audio issue when REINVITE with specific codec is rejected by remote end (M10416) - link
- Bugfix: Received REINVITE with new codec were not propagated (M10416) - link
- Bugfix: Blind transfer were not logger properly in queue_log (M10886) - link
- Limitation: iLBC support has been deprecated. G.729 is recommended for low bandwidth environments
Communication Server v.2.8.7 (intermediate version) Show release notesHide release notes
- Bugfix: Video lost when SIP Session Timers is activated (M19546) - link
Communication Server v.2.8.6 (intermediate version) Show release notesHide release notes
- Improvement: Removed dependency on DAHDI module (M19147) - link
- Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: This removes support for the AddToConference action (M19147) - link
Communication Server v.2.8.5 (intermediate version) Show release notesHide release notes
- Improvement: activation of RTP probation (Backport M12797) - link
Communication Server v.2.8.4 (intermediate version) Show release notesHide release notes
- Improvement: Added the ability to modify SIP timers (M9720) - link
- Bugfix: Deactivate defense daemon when switching to standby mode (M9721) - link
LDAP Server
LDAP Server v.1.5.2 (intermediate version) Show release notesHide release notes
- Locked by WTI: Fusion3.3.0
- Empty last names are replaced by "?"; so Polycom phones can list them (M7157) - link
LDAP Server v.1.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixed wrong depency for slapd (M0)
LDAP Server v.1.5.0 (intermediate version) Show release notesHide release notes
- Improvement: increase maximum number of records returned (M5632) - link
- Feature: added a Shell plugin to search local LDAP server (M5481) - link
- Feature: added the ldap-utils package (M5481) - link
Shell
Shell v.1.19.0 (intermediate version) Show release notesHide release notes
- Feature: Added diagnostic tools to CLI: arp cat dpkg_list dpkg_list_escaux dump_to_sftp less ls netstat nslookup ping probe_list probe_run probe_run_all ps pstree ssh telnet top traceroute (M9049) - link
Shell v.1.18.0 (intermediate version) Show release notesHide release notes
- Bugfix: Display correct version number (M8271) - link
Shell v.1.17.0 (intermediate version) Show release notesHide release notes
- Bugfix: Keyboard was not configured correctly on Baseline 3 with SOPShell (M8075) - link
- Bugfix: The feature to configure eth1 could make the Shell unusable on small screens. It was removed. (M8068) - link
- Feature: Added keyboard configuration to SOPCli (M8075) - link
- Bugfix: Permissions were not correctly set on capture files (M7554) - link
- Improvement: Reduce module installation time on high latency networks (M8766) - link
Shell v.1.16.0 (intermediate version) Show release notesHide release notes
- Feature: Added tools to the commandline shell that allow management of the network configuration and the SMP connection. (M7604) - link
Shell v.1.15.1 (intermediate version) Show release notesHide release notes
- Improvement: Enable Asterisk Events logging using Sop Shell (M5926) - link
- Improvement: Added the possibility to configure eth1 (M7708) - link
- Bugfix: Wrong file permissions on output network captures (M4021) - link
Shell v.1.15.0 (intermediate version) Show release notesHide release notes
- Feature: Basic command line access on SOP (M7282) - link
Shell v.1.14.6 (intermediate version) Show release notesHide release notes
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
- Deprecated: This version does not properly limit SCP access (M11014) - link
net.Supervisor
net.Supervisor v.1.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible clear the preferences from the application. (M8783) - link
- Feature: Added a landing page. (M8774) - link
net.Supervisor v.1.5.0 (intermediate version) Show release notesHide release notes
- Bugfix: Fix safetynet configuration file. (M0)
- Bugfix: net.Supervisor is now compatible with Web Server. (M0)
- Bugfix: net.Supervisor was displayig 'no data' until we change the "History to consider" (M8404) - link
- Bugfix: "History to consider" in case of a MAX value changes suddenly (M8408) - link
- Improvement: Improve reconnection mechanism (M5913) - link
- Improvement: Updated Jsch to version 0.1.50. (M0)
- Improvement: Code maintenance (M5376) - link
net.Supervisor v.1.4.7 (intermediate version) Show release notesHide release notes
- Bugfix: Support Java 7u45. This version of Java breaks JNLP compatibility. (M7484) - link
PUM
PUM v.3.4.0 (intermediate version) Show release notesHide release notes
- Bugfix: Broadcast status to clustered SOPs with parallel request fix timeout issue. (M9135) - link
New resource versions
MeshSipTrunk
MeshSipTrunk v.1.13.1 (intermediate version) Show release notesHide release notes
- Bugfix: The trunk was not propagating the 180 SIP Ringing transparently
net.Buzz
net.Buzz v.1.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Added g722 audio codec support (M6601) - link
- Improvement: Added video support (M6601) - link
net.Buzz v.1.0.2 (intermediate version) Show release notesHide release notes
- Deprecated: Version no longer supported
SangomaBRI
- SangomaBRI v.2.4.0 Show release notesHide release notes
- Feature: Allow to set a default callerid in case a regular expression is not matched (M8655) - link
- Bugfix: Overlap Dialing without DNIS was causing the call to be hangup (M8417) - link
- Improvement: Add DTMF Mode option (M9166) - link
SangomaPRI
- SangomaPRI v.2.4.0 Show release notesHide release notes
- Feature: Allow to set a default callerid in case a regular expression is not matched (M8655) - link
- Bugfix: Overlap Dialing without DNIS was causing the call to be hangup (M8417) - link
- Bugfix: The clir flag was not transmitted to the Communication Server
- Improvement: Add DTMF Mode option (M9166) - link
Escaux Connect SIP peer
- Escaux Connect SIP peer v.1.1.0 Show release notesHide release notes
- Improvement: WebSocket domain name provisioned from SMP (M0)
- Feature: Added softkeys and their configuration (M9112) - link
- Feature: Added the ice_delay_200 flag to keep caller ringing while ICE negociating (M9116) - link
- Feature: Make STUN server configurable (M9375) - link
Cisco SPA2102
- Cisco SPA2102 v.1.15.0 Show release notesHide release notes
- Feature: Added codec selection for fax pass-through (M8788) - link
- Deprecated: This version does not create the configuration files on all SOPs of a cluster
Cisco SPA2102 v.1.14.2 (intermediate version) Show release notesHide release notes
- Bugfix: Only write codec configuration on the selected SOP (M12881) - link
Cisco SPA2102 v.1.14.1 (intermediate version) Show release notesHide release notes
- Bugfix: 6693: When you dialed internal numbers (1000 or 1100), the Belgian dialplan called the emergency services (100) (M6693) - link
- Bugfix: Display the correct RTP ToS/DiffServ Value for EF (M9791) - link
- Deprecated: Affects codec settings on other SOP of a cluster (M12881) - link
ThomsonST2030
ThomsonST2030 v.1.60.0 (intermediate version) Show release notesHide release notes
- Feature: Upgrade to firmware 2.78 to fix transfers through corporate directory (M8619) - link
- Feature: Configurable voicemail service extension. (M7747) - link
ThomsonST2030 v.1.51.0 (intermediate version) Show release notesHide release notes
- Feature: Added "Extension and Name" option in the "Display owner info" field. (M8891) - link
- Improvement: Allow all combinations of display name and extension. (M8891) - link
- Bugfix: Configuration was not generated when a lot of phones are used in the cluster. (M8666) - link
ThomsonST2030 v.1.50.0 (intermediate version) Show release notesHide release notes
- Improvement: Firmware upgrade to 1.66 (M8153) - link
- Feature: COLP support (M8153) - link
- Bugfix: Accented characters were not displayed correctly (M8275) - link
ThomsonST2030 v.1.41.1 (intermediate version) Show release notesHide release notes
- Bugfix: Configuration was not updated when changes were made via mConnect (M8062) - link
ThomsonST2030 v.1.41.0 (intermediate version) Show release notesHide release notes
- LOCK IRISNET
- NEVER TO BE RELEASED (this version is buggy; see 1.41.1)
ThomsonST2030 v.1.40.0 (intermediate version) Show release notesHide release notes
- Feature: Allow configuration reload from the SOP (M7835) - link
ThomsonST2030 v.1.39.0 (intermediate version) Show release notesHide release notes
- Feature: Added Active-Active support (M7420) - link
- Feature: Allows the resource to be reconfigured on the SOP (M7450) - link
- Improvement: The "global" language has been added to use the language of the owner (M7826) - link
SIP Trunk
- SIP Trunk v.1.53.0 Show release notesHide release notes
- Improvement: Enabled redundancy mode for T38 and set T38 maxdatagram to 400 (M0)
- Improvement: Added the possibility to activate the Promiscuous Redirect (M9504) - link
- Feature: Added auth register and user register options (M9568) - link
SIP Trunk v.1.52.2 (intermediate version) Show release notesHide release notes
- Improvement: Allow to restrict INVITE to known IP (MS-474)
SIP Trunk v.1.52.1 (intermediate version) Show release notesHide release notes
- Bugfix: Service creation mode was not working for all fields (M8993) - link
- Feature: Add the P-Preferred-ID option and the P-Preferred-ID-NO_CLIR option in the caller ID method (M8963) - link
SIP Trunk v.1.52.0 (intermediate version) Show release notesHide release notes
- Feature: Allow to set a default callerid in case a regular expression is not matched (M8655) - link
- Improvement: activate local Music-on-hold or not (M8381) - link
- Improvement: Added the possibility to activate the reinvite on outgoing calls only (M8436) - link
SIP Trunk v.1.51.0 (intermediate version) Show release notesHide release notes
- Improvement: added the release cause in the SIP header when hanging up the call (M8129) - link
SIP Trunk v.1.50.0 (intermediate version) Show release notesHide release notes
- Improvement: Support of providers sending the called extension in the TO header (M6897) - link
- Bugfix: Register was not working when a sipsock id was set (M7903) - link
- Bugfix: Register timeout to request was not applied to Communication Server 3 (M7903) - link
- Feature: Added the possibility to configure ptime (M8013) - link
SIP Trunk v.1.47.0 (intermediate version) Show release notesHide release notes
- Feature: Support Extra codecs including video codecs (g723, h261, h263, h263, h264, mpeg4) (M7512) - link
SIP Trunk v.1.46.0 (intermediate version) Show release notesHide release notes
- Feature: Select another SIP socket than the default one (M6625) - link
- Feature: Added the possibility to provide a SOPKey in the sip gateway field (M6843) - link
- Feature: Configurable qualify timers (M7070) - link
- Feature: Configurable register timeout requested on remote host (M7070) - link
- Improvement: You can now use the variable "resource name"_DirectoryIdentifier in order to use the directory identifier in a callflow (M6994) - link
- Improvement: Added the possibility to configure SIP retransmission timer (M6777) - link
- Improvement: Added the possibility to configure SIP session timers (M6779) - link
- Bugfix: The "Send Caller ID method" option always set "Use Private-Asserted_Identity"
PolycomIP550
PolycomIP6000
PolycomIP330
PolycomIP330 v.5.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500 (M0)
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0 (M0)
PolycomIP330 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomIP330 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: This resource now supports Escaux SOP Templating language for the speeddials. (M7595) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. The speedials were refactored
- Improvement: Removed slow rexec comands during apply changes (M7787) - link
- Improvement: Removed unsupported g722 from the porposed codec list (M5333) - link
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. The softkey configuration was misleading and not correctly applied (M7634) - link
- Feature: Configurable voicemail service extension. (M7747) - link
PolycomIP330 v.4.9 (intermediate version) Show release notesHide release notes
- Feature: Option to disable contact editing in the phone's directory (M4249) - link
PolycomIP330 v.4.8 (intermediate version) Show release notesHide release notes
- Feature: Add an extra value in the Message Type drop down (M0004180) - link
- Feature: Be able to indicate something else than the SOPs as the server 1 and server 2 (M0004149) - link
PolycomIP330 v.4.7 (intermediate version) Show release notesHide release notes
- Feature: added the possibility to not append the extension at the end of the idle url
PolycomIP330 v.4.6 (intermediate version) Show release notesHide release notes
- Feature: Configurable sip account password (M0004063) - link
PolycomIP330 v.4.5 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting (M0003970) - link
- Feature: Added 802.1x phone supplicant authentication
- Feature: Check if mac address is not already used for another phone (M0003853) - link
- Feature: Added possibility to configure Push URL (M0003970) - link
PolycomIP330 v.4.3 (intermediate version) Show release notesHide release notes
- Bugfix: Absolute symbolic links replaced with relative symbolic links to fix an incompatibility with the new TFTP server.
PolycomIP330 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP330 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomIP330 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomIP330 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
PolycomIP330 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
PolycomIP330 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomIP330 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
PolycomIP670
PolycomIP650
PolycomIP560
PolycomIP331
PolycomIP450
PolycomIP7000
PolycomVVX500
PolycomVVX310
PolycomVVX400
PolycomVVX300
PolycomVVX410
PolycomVVX600
SyncCDRDB
- SyncCDRDB v.2.2.0 Show release notesHide release notes
- Bugfix: Keep last state for "probe" class in attribute_log table (M9058) - link
- Bugfix: Delete data after 2 years and not 3 (M9058) - link
- Bugfix: Check and compare row->{dst} with list of callflows, skip if it matches (M9488) - link
- Bugfix: Records were missing when a call was leaving a queue when there are no members (M9160) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.1.2 (intermediate version) Show release notesHide release notes
- Improvement: added support for asterisk 18 (MS-467)
SyncCDRDB v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Compatibility with baseline 8 (MS-418)
SyncCDRDB v.2.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Synchronize Agent Device Owner for qdr (M8722) - link
- Improvement: Keep the longest userfield when aggregate the CDR (M8960) - link
- Bugfix: Fix Lua expression in timezone (M9552) - link
- Bugfix: IAX device were not filled in when importing CDRs
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Sync username from attribute logs (M7502) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.1.9 (intermediate version) Show release notesHide release notes
- Bugfix: required for clustered smp
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.1.8 (intermediate version) Show release notesHide release notes
- fixes device chopped at 8 chars
- limit feature
SyncCDRDB v.1.7 (intermediate version) Show release notesHide release notes
- Bugfix: fixes if no uniqueid in source cdrdb
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.1.6 (intermediate version) Show release notesHide release notes
- Bugfix: no update schema (use DB module)
- Bugfix: don't run on multiple SOPs (confusing with cluster)
- Bugfix: don't run on HA standby when using HA 2.0 / stable-4
- Deprecated: Significant improvements have been done to newer versions
SyncCDRDB v.1.5 (intermediate version) Show release notesHide release notes
- Bugfix: correctly set accountcode, etc when in cluster mode
- Deprecated: Significant improvements have been done to newer versions
SyncCDRDB v.1.4 (intermediate version) Show release notesHide release notes
- Bugfix: support nondefault smp (different sopdomain)
- Feature: Last Supported version for SMP <= stable-3
- Feature: Allows to set limit on number of attribute_log / cdrs to process
- Feature: Works around no uniqueid in cdr (untested)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.1.3 (intermediate version) Show release notesHide release notes
- Bugfix: Include lib (for queues)
- Bugfix: optimize avoiding query in loop
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.1.21.0 (intermediate version) Show release notesHide release notes
- Improvement: Synchronize Agent Device Owner for qdr (M8722) - link
- Bugfix: Fix Lua expression in timezone (M9552) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.1.20.0 (intermediate version) Show release notesHide release notes
- Feature: Allow correct parsing of CALLED and CALLER Number for the CACPnP (M8119) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: sdr generation + better debugging
- Deprecated: Significant improvements have been done in a higher version
SyncCDRDB v.1.19.3 (intermediate version) Show release notesHide release notes
SyncCDRDB v.1.19.2 (intermediate version) Show release notesHide release notes
- improvement: optimize fetch attribute_log query
SyncCDRDB v.1.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Translate correctly devices to firstname and extension for phone_queue class (M6381) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Cisco SPA8000
Cisco SPA8000 v.1.8.0 (intermediate version) Show release notesHide release notes
- Feature: Add codec selection for fax passthru (M8788) - link
- Bugfix: Using the preferred codec could change the codec preference on other resources (M9787) - link
Cisco SPA112
Cisco SPA112 v.1.15.0 (intermediate version) Show release notesHide release notes
- Feature: Add codec selection for fax passthru (M8788) - link
- Bugfix: Using the preferred codec could change the codec preference on other resources (M9787) - link
Cisco SPA112 v.1.14.3 (intermediate version) Show release notesHide release notes
- Bugfix: T38 option was not set properly on sops other than primary or secondary SOP (M0)
- Deprecated: In certain cases, using this resource can negatively impact the codec negotiation of SIP trunks or SIP devices (M9787) - link
Cisco SPA112 v.1.14.2 (intermediate version) Show release notesHide release notes
- Bugfix: 6693: When you dialed internal numbers (1000 or 1100), the belgium dialplan was calling the emergency (100) (M6693) - link
- Deprecated: In certain cases, using this resource can negatively impact the codec negotiation of SIP trunks or SIP devices (M9787) - link
Cisco SPA112 v.1.14.1 (intermediate version) Show release notesHide release notes
- Bugfix: Added option to alow re-invite in the resource. (M0)
- Deprecated: In certain cases, using this resource can negatively impact the codec negotiation of SIP trunks or SIP devices (M9787) - link
Cisco SPA3102
Cisco SPA3102 v.1.5.0 (intermediate version) Show release notesHide release notes
- Locked by WTI: Fusion3.3.0
- Feature: Add codec selection for fax passthru (M8788) - link
Cisco SPA3102 v.1.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: When you dialed some internal numbers, the belgium dialplan was calling the emergency number (M6693) - link
- Improvement: add extra Config options (More Echo Suppression, Hotline SIP and RTP options)(M5983) - link
Queue
Queue v.3.0.0 (intermediate version) Show release notesHide release notes
- Feature: Removed roundrobin strategy, replaced by linear and added wrandom (M6170) - link
- Feature: Added support for queue weight on Communication Server (M5485) - link
- Improvement: Easier selection of multiple permanent members (M4771) - link
- Improvement: Do not show Device categories in Permanent members selection box on SMP 4.10 and higher (M4771) - link
- Improvement: Possible to modify the order of permanent members (M4771) - link
- Improvement: Possible to configure a penalty for each permanent member (M4771) - link
- Limitation: Improvements only available with SMP v4.10+ (M4771) - link
- Limitation: Active-active queue management not supported
Queue v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Added support for queue weight on Communication Server (M5485) - link
Polycom Virtual Phone
New action versions
- Goto.APPLICATION
- Goto.APPLICATION v.1.4.0 Show release notesHide release notes
- Improvement: Added LastUserOffice LastUserDepartment LastUserLogin LastUserOwner LastUserProfile and LastUserStatus (M6757) - link
- Improvement: Compatibility with Communication Server 3 (M7654) - link
STARTFAXAPPLICATION.3.11
MapNumber
MapDDI
STARTDYNAMICAPPLICATION.8.2
- STARTDYNAMICAPPLICATION.8.2 v.1.0.0 Show release notesHide release notes
- Bugfix: Call was no longer sent to SOP1 when originated from SOP2 (M10429) - link
- Feature: Add support for presence on extensions of the directory (M8423) - link
- Feature: Add mechanism to avoid loop between two SOPs (M9643) - link
- Improvement: Activate presence only if a specific profile parameter is set (M9876) - link
Included components
Modules
Resources
Actions
Version 3.2.0 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
| Action |
| Reboot SOP |
| Reboot all phones |
Changed components
Show changed componentsHide changed components
New module versions
- DHCP Server
- DHCP Server v.2.3.0 (intermediate version) Show release notesHide release notes
- Feature: Support DHCP options for LG-Ericsson IP phones (M7602) - link
- Feature: Dynamic configuration of DHCP through resources (M7507) - link
- Feature: Configurable domain name (M6937) - link
- Improvement: Allow the same syntax for extended subnets as in the default subnet parameters
- Bugfix: DHCP options for SNOM phones were incorrect (M5629) - link
DHCP Server v.2.2.0 (intermediate version) Show release notesHide release notes
- Feature: Allow HTTP/HTTPS provisoning for Polycom phones (M6262) - link
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
Database Schema
Database Schema v.1.26.0 (intermediate version) Show release notesHide release notes
- Feature: Added more fields to global parameters (M7389) - link
- Feature: Added labels and function columns to resource, in order to support SPEEDDIAL global parameter (M7450) - link
SOP API
- SOP API v.4.4.0 Show release notesHide release notes
- Feature: dbGetMemberInfo now also returns the user's language (M7822) - link
- Feature: Enhanced the API module to allow the usage of the contact of the csv file to be used in net.Desktop (M7521) - link
- Bugfix: Extension owner check are now case insensitive like on the SMP (M0)
- Feature: Support for Communication Server 3 (M7853) - link
SOP API v.4.3.3 (intermediate version) Show release notesHide release notes
- Bugfix: Incorrect premission on process-template (M12275) - link
SOP API v.4.3.2 (intermediate version) Show release notesHide release notes
- Bugfix: Mail to Fax no longer working due to sudo permission problem (M0)
- Bugfix: Remove unused columns in dbGetProfileParameters (M0)
- Bugfix: Incorrect premission on process-template (M12275) - link
SOP API v.4.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Log UserEvent manager interface messages to allow to disable other events and increase system performance. (M11983) - link
SOP API v.4.3.0 (intermediate version) Show release notesHide release notes
- Bugfix: phone_queue class is not set to NULL anymore when a phone leaves a queue (M6381) - link
- Bugfix: Colon was not allowed in profile parameters value (M0)
- Feature: ccQueueAdd and ccQueueRemove are now accessible from network (M7219) - link
- Feature: Allow users to specify not equal is where clauses for extension select and selection list global parameters (M7286) - link
- Feature: Translate the display field of extension select and extension list global parameters (M7287) - link
- Feature: Allow profile parameters values to be shown in extension select and extension list global parameters (M7303) - link
- Bugfix: Where clauses of extension select and extension list global parameters were not parsed correctly (M0)
- Feature: Extension select and extension list global parameters now support two clauses (M7389) - link
- Feature: dbGetProfileParameterLayout now returns the admin vars when asked (M7389) - link
- Feature: It is now possible to translate the content of directory entry fields for extension select and extension list global parameters (M7353) - link
- Feature: Added support for test on empty fields for extension select and extension list (M0)
- Feature: Added match on Profile Parameter value in API, allowing all characters(M0)
- Feature: ccRebootPhone is now accessible from network (M7450) - link
- Feature: ccReconfigurePhone is now available. (M7450) - link
- Feature: Add an option to dbGetDirectoryInfo to show profile parameter, and filter by admin. (M7598) - link
SOP API v.4.2.5 (intermediate version) Show release notesHide release notes
- Bugfix: It was not possible to retrieve the profile paraemeters (M220070) - link
SOP API v.4.2.4 (intermediate version) Show release notesHide release notes
- Bugfix: Backport from 4.9.0, Queue call counters in net.Supervisor were not updated properly in some cases (M9261) - link
SOP Base
SOP Base v.1.8.3 (intermediate version) Show release notesHide release notes
- Bugfix: Remove cron-minutely from SOP Base as it is already packaged in System Base(M7969) - link
SOP Base v.1.8.2 (intermediate version) Show release notesHide release notes
- Bugfix: Fix incompatibility with PUM (M8164) - link
- Deprecated: cron-minutely is already packaged in System Base(M7969) - link
SOP Base v.1.8.1 (intermediate version) Show release notesHide release notes
- Improvement: Do not require phone to be registered for phone reconfigure (M7940) - link
- Improvement: Include minutely cron jobs package inside the SOP Base module (M7969) - link
- Deprecated: Breaks PUM (M8164) - link
SOP Base v.1.8.0 (intermediate version) Show release notesHide release notes
- Feature: Support Communication Server 3 (M7853) - link
- Deprecated: Prototype release
SOP Base v.1.7.0 (intermediate version) Show release notesHide release notes
- Improvement: moved attributes library to System Base module (M7519) - link
- Feature: Phone command allows to reconfigure the provisioning file (M7450) - link
- Deprecated: Breaks PUM (M8164) - link
SOP Base v.1.6.0 (intermediate version) Show release notesHide release notes
- Feature: Support Baseline 3 (M6821) - link
- Improvement: Removed snmp support which is now in System Base (M0)
SOP Base v.1.5.6 (intermediate version) Show release notesHide release notes
- Bugfix: There was still a dependency with the phone support modules (M7223) - link
SOP Base v.1.5.5 (intermediate version) Show release notesHide release notes
- Improvement: Removed dependency with the phone support modules (M7223) - link
PUM
SNMP Agent
- SNMP Agent v.3.4.3 Show release notesHide release notes
- Feature: Support for monitoring Sangoma NetBorder BRI interfaces (M8718) - link
- Bugfix: PRI probe for Sangoma NetBorder PRI interfaces was not working (M9204) - link
SNMP Agent v.3.4.2 (intermediate version) Show release notesHide release notes
- Feature: Support for monitoring RAID on baseline 3. (M9030) - link
SNMP Agent v.3.4.1 (intermediate version) Show release notesHide release notes
- Improvement: Factorized the implementation of physical sop probes and virtual sops probe. (M8461) - link
- Bugfix: Fixed incoherent values between physical sops and virtual sops. (M8461) - link
SNMP Agent v.3.4.0 (intermediate version) Show release notesHide release notes
- Feature: Check and report the synchronization state of the NTP server (M4620) - link
- Feature: Created the DHCP configuration probe plugin (M8495) - link
- Feature: Creation of a generic Memory usage probe (for SOPs or vSOPs) (M8461) - link
- Feature: Creation of a generic CPU usage probe (for SOPs or vSOPs) (M8460) - link
- Feature: Creation of a inode usage on a partition probe (for SOPs or vSOPs) (M8033) - link
- Bugfix: Reactivate net.Console availability probe (M8482) - link
- Bugfix: vsop memory reports used memory including cache instead of just rss (M8281) - link
SNMP Agent v.3.3.0 (intermediate version) Show release notesHide release notes
- Feature: Provide productized monitoring of SQL replication and SMP status (M7967) - link
- Improvement: Avoid starting the scheduled task at the same minute for each VSOP (M7978) - link
SNMP Agent v.3.2.0 (intermediate version) Show release notesHide release notes
- Feature: Randomized probe poller in order to improve vSOP's scalability (M7969) - link
SNMP Agent v.3.1.2 (intermediate version) Show release notesHide release notes
- Bugfix: Added missing package for Baseline 3 compatibility (M7811) - link
SNMP Agent v.3.1.1 (intermediate version) Show release notesHide release notes
- Feature: Compatibility with Baseline 3
- Bugfix: Web server sensor (M7596) - link
- Bugfix: Ambient Temperature sensor (M7596) - link
- Bugfix: Fans sensor (M7596) - link
- Bugfix: Power Supply Redundancy sensor (M7596) - link
- Improvement: SIP Selftest runs in its own context (SelftestContext) and bypasses Call Admission Control mechanism (M7515) - link
- Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: The SIP Selftest probe needs to be updated to 1.5.1 if used
SNMP Agent v.3.1.0 (intermediate version) Show release notesHide release notes
- Feature: support probes on SMPs (M7519) - link
SNMP Agent v.3.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Run only probes for which a resource exists (M0007283) - link
- Improvement: support installing this module on an SMP, now includes snmpd (moved from SOP Base) (M0007283) - link
SNMP Agent v.2.15.0 (intermediate version) Show release notesHide release notes
- Feature: Include finished calls passed during the last polling period in computation (M11435) (backport) - link
SNMP Agent v.2.14.2 (intermediate version) Show release notesHide release notes
- Improvement: Backport support for monitoring Sangoma PRI interface status (M10388) - link
SNMP Agent v.2.14.1 (intermediate version) Show release notesHide release notes
- Improvement: Reduced load generated by the DB Consistency probe (Backport M9671) - link
SNMP Agent v.2.14.0 (intermediate version) Show release notesHide release notes
- Feature: Backported support for SIP selftest probe 1.5.3 (M8701) - link
- Feature: Backported support for BRI probe (M8718) - link
Sangoma Card Support
- Sangoma Card Support v.2.10.0 Show release notesHide release notes
- Feature: Upgrade to Netborder 4.4.7, wanpipe drivers 7.0.11.4 and A10X firmware v40. Post installation : Check and apply the card's firmware update if needed (M9332) - link
- Improvement: Added the possibility to flash new firmware on the cards (M9332) - link
System Base
- System Base v.1.4.3 Show release notesHide release notes
- Bugfix: It was not possible to create a resource which was not linked to an extension (M9413) - link
- Bugfix: PUM login/logout could fail when executed via a callflow
- Deprecated: the installation was aborded when no log file was present (clean install)
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.4.2 (intermediate version) Show release notesHide release notes
- Bugfix: fix warning log output of a library
- Bugfix: Apply changes when configuring resources sharing the same MAC address failed (M9346) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Added support for ESCAUX template language to PUM. (M8822) - link
- Bugfix: SopSyncFastDBSync now processes tables in the correct order (M9004) - link
- Deprecated: Apply changes when configuring resources sharing the same MAC address failed (M9346) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.4.0 (intermediate version) Show release notesHide release notes
- Feature: Support for "SopSyncFastDBSync" to do the db sync queries locally on the sop which is especially important on high latency networks (M0008524) - link
- Improvement: Reduce module installation time on high latency networks (M8766) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.3.3 (intermediate version) Show release notesHide release notes
- Bugfix: For airbus (MS-128)
System Base v.1.3.2 (intermediate version) Show release notesHide release notes
- Bugfix: Package installation could block on an interactive question on Baseline 3.
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.3.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fix memory leak in Inline::Lua (M8169) - link
- Bugfix: Update version of cron-minutely (M7969) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.3.0 (intermediate version) Show release notesHide release notes
- Feature: Add the "date" function to the template language (M8062) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.2.1 (intermediate version) Show release notesHide release notes
- Improvement: Support of speeddials without label or extension, for example the call history (M7810) - link
- Bugfix: Sometimes files could no longer be transferred from the SMP to the SOP after installation
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.2.0 (intermediate version) Show release notesHide release notes
- Feature: include support for using probes without installing SOP Base module (M7519) - link
- Improvement: moved attributes library from SOP Base module to System Base module (M7519) - link
- Feature: Added template evaluation on the SOP (M7450) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
System Base v.1.1.1 (intermediate version) Show release notesHide release notes
- Improvement: Sopbase.php was generating a lot of PHP messages (M5980) - link
- Improvement: Updated Java virtual machine to 6u45 for baseline2 and baseline3 (M0)
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
Polycom Phone Support
- Polycom Phone Support v.5.1.0 Show release notesHide release notes
- Feature: Indication on the phone that a call forwarding is currently activated. (M9289) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
Polycom Phone Support v.5.0.3 (intermediate version) Show release notesHide release notes
- Bugfix: The module parameter 'Resolve caller name from local directory' and the subsequent ones were not taken into account (M9675) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
Polycom Phone Support v.5.0.2 (intermediate version) Show release notesHide release notes
- Bugfix: Cleaning of the old configuration file after an "Apply change" was not done
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
- Deprecated: The module parameter 'Resolve caller name from local directory' and the subsequent ones were not taken into account (M9675) - link
Polycom Phone Support v.5.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: Configuration files were not correctly deleted after an apply changes (M8764) - link
- Bugfix: it was not possible to create a resource which is not linked to an extension (M9413) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
- Deprecated: The module parameter 'Resolve caller name from local directory' and the subsequent ones were not taken into account (M9675) - link
Polycom Phone Support v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: Add support for mConnect and PUM to phones using the version 5.0.0 and above of the resource. (M8992) (M8828) - link
- Feature: Upgrade VVX series firmware to 5.1.1 (M9034) - link
- Bugfix: Backlight no longer turns on in relation to MWI (VVX phones only) (M8939) - link
- Bugfix: Removed reload option (M9031) - link
- Limitation: PUM 'login/logout without reboot' doesn't work with this version.
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
- Deprecated: The module parameter 'Resolve caller name from local directory' and the subsequent ones were not taken into account (M9675) - link
Polycom Phone Support v.4.10.0 (intermediate version) Show release notesHide release notes
- Bugfix: Overwrite custom configuration options during zeroconf (M0)
- Bugfix: SVE2 phones now support version 5.0.0 of the Polycom resources (M8672) - link
- Improvement: Add reboot for VVX600 phones (M8640) - link
- Improvement: Reduce module installation time on high latency networks (M8766) - link
- Limitation: The DND softkey cannot be disabled on VVX300/310/400/410 phones (M7743) - link
- Limitation: Disabling the DND causes the Polycom phone to send Subscribe message which are rejected by the SOP (M7274) - link
- Limitation: Disabling BLF prevents the MyStat and Buddies softkeys to appear (M7746) - link
- Limitation: It is not possible to disable some unused softkey such as call forward and DND (M7744) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
- Limitation: Changing the VVX configuration requires to do an 'update configuration' or to do 2 reboot of the phone. It is recommended to set 'Use reloads instead of reboot if possible' to 'yes' in the module parameters (M8824) - link
Polycom Phone Support v.4.9.0 (intermediate version) Show release notesHide release notes
- Feature: Support firmware 4.1.6 for VVX300, VVX310, VVX400, VVX410, VVX600 (M8007) - link
- Feature: Add reboot and zero-conf support for VVX300 and VVX410 (M8059) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster (M5991) - link
- Improvement: Add the possibility to configure DSCP for video (M8370) - link
- Improvement: Support directory clearing when the 'local' option is used. (M8065) - link
- Bugfix: Reusing macs on different resources no longer breaks provisioning. (M7787) - link
- Bugfix: Fix parameters for date function in Idle.php (M7563) - link
- Limitation: The DND softkey cannot be disabled on VVX300/310/400/410 phones (M7743) - link
- Limitation: Disabling the DND causes the Polycom phone to send Subscribe message which are rejected by the SOP (M7274) - link
- Limitation: Disabling BLF prevents the MyStat and Buddies softkeys to appear (M7746) - link
- Limitation: It is not possible some unused softkey such as call forward and DND (M7744) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
- Limitation: Changing the VVX configuration requires to do an 'update configuration' or to do 2 reboot of the phone. It is recommended to set 'Use reloads instead of reboot if possible' to 'yes' in the module parameters (M8824) - link
Polycom Phone Support v.4.8.0 (intermediate version) Show release notesHide release notes
- Feature: Allows to configure Daylight Saving Time for North America & Mexico (M6258) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
New resource versions
- PhoneZeroConf
- PhoneZeroConf v.1.10.1 (intermediate version) Show release notesHide release notes
- Bugfix: may fail to do apply changes on smp 4.8, config will be done but phones won't reboot
DB Consistency
Application Management Server
net.Console availability
- net.Console availability v.1.3.0 Show release notesHide release notes
- Improvement: Probe will now not be executed on the server if it is not defined on the SMP (M6425) - link
- Bugfix: Probe will not work correctly (M0008482) - link
Web Server
NTP Server
SIP selftest
SIP selftest v.1.5.2 (intermediate version) Show release notesHide release notes
- Improvement: Forced alaw coded in selftest peer (M7515) - link
SIP selftest v.1.5.1 (intermediate version) Show release notesHide release notes
- Improvement: Sip selftest runs in its own context and does not go through call admission control mechanism (M7515) - link
SIP selftest v.1.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Probe will now not be executed on the server if it is not defined on the SMP (M6425) - link
- Deprecated: Selftest context used in this version is invalid
SIP selftest v.1.4.1 (intermediate version) Show release notesHide release notes
PolycomVVX500
- PolycomVVX500 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomVVX500 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomVVX500 v.5.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: polycom with mac 64:16:7F and old firmware (backport)
PolycomVVX500 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support one expansion module (color or paper display) (M8249) - link
- Feature: Speeddials and BLF can be mixed, and have absolute positions
- Feature: Configurable voicemail service extension (M7747) - link
- Improvement: BLF (supervision) uses the phones LED to show extended status
- Improvement: Removed slow operations during apply changes (M7787) - link
- Improvement: Enable video setting (M7777) - link
- Bugfix: The DND softkey is fully deactivated
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: The softkey configuration was misleading and not correctly applied (M7634) - link
- Limitation: The DND softkey cannot be hidden
- Limitation: Not compatible with Personal User Mobility (PUM)
- Limitation: Not compatible with m.Connect
PolycomVVX500 v.4.24.1 (intermediate version) Show release notesHide release notes
- Improvement: Restrict INVITE to known IP (MS-474)
PolycomVVX500 v.4.24.0 (intermediate version) Show release notesHide release notes
- Feature: Compatibility with both module 4.x and module 5.x (MS-226)
PolycomVVX500 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX500 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomVVX500 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomVVX500 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
- Improvement: Removed H263+ from the codec list which is not supported by the VVX500 (M7989) - link
- Improvement: Added the possibility to disable the PC LAN Port (M7989) - link
PolycomVVX500 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
- Feature: Add support for h264 video codec (M6612) - link
PolycomVVX500 v.4.21 (intermediate version) Show release notesHide release notes
- Improvement: Added H261/H263/H263P/H264 video support
- Deprecated: Configuration files are not generated on standalone SOPs (M7914) - link
PolycomVVX500 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomVVX500 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
PolycomIP6000
- PolycomIP6000 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomIP6000 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomIP6000 v.5.0.0 (intermediate version) Show release notesHide release notes
- Improvement: Removed slow rexec comands during apply changes (M7787) - link
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. The softkey configuration was misleading and not correctly applied (M7634) - link
- Feature: Configurable voicemail service extension. (M7747) - link
PolycomIP6000 v.4.9 (intermediate version) Show release notesHide release notes
- Feature: Option which remove the ability to edit contacts in the directory of the phone (M4249) - link
PolycomIP6000 v.4.8 (intermediate version) Show release notesHide release notes
- Feature: Add an extra value in the Message Type drop down (M0004180) - link
- Feature: Be able to indicate something else than the SOPs as the server 1 and server 2 (M0004149) - link
PolycomIP6000 v.4.7 (intermediate version) Show release notesHide release notes
- Feature: added the possibility to not append the extension at the end of the idle url
PolycomIP6000 v.4.6 (intermediate version) Show release notesHide release notes
- Feature: Configurable sip account password (M0004063) - link
PolycomIP6000 v.4.5 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting (M0003970) - link
- Feature: Added 802.1x phone supplicant authentication
- Feature: Check if mac address is not already used for another phone (M0003853) - link
- Feature: Added possibility to configure Push URL (M0003970) - link
PolycomIP6000 v.4.3 (intermediate version) Show release notesHide release notes
- Bugfix: When the Directory is set to "Local", the phonebook is erased after each reboot (M0003539) - link
- Feature: Add "Clear" for the Directory
- Bugfix: Replaces absolute symbolic links with relative symbolic links, due to an incompatibility with the new TFTP server.
PolycomIP6000 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP6000 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomIP6000 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomIP6000 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
PolycomIP6000 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
PolycomIP6000 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomIP6000 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
PolycomIP650
- PolycomIP650 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomIP650 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomIP650 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: This resource now supports Escaux SOP Templating language for the speeddials. (M7595) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. The speedials were refactored
- Improvement: Removed slow rexec comands during apply changes (M7787) - link
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. The softkey configuration was misleading and not correctly applied. (M7634) - link
- Feature: Configurable voicemail service extension. (M7747) - link
PolycomIP650 v.4.9 (intermediate version) Show release notesHide release notes
- Feature: Option which removes the ability to edit contacts in the directory of the phone (M4249) - link
PolycomIP650 v.4.8 (intermediate version) Show release notesHide release notes
- Feature: Add an extra value in the Message Type drop down (M0004180) - link
- Feature: Be able to indicate something else than the SOPs as the server 1 and server 2 (M0004149) - link
PolycomIP650 v.4.7 (intermediate version) Show release notesHide release notes
- Feature: added the possibility to not append the extension at the end of the idle url.
PolycomIP650 v.4.6 (intermediate version) Show release notesHide release notes
- Feature: Configurable sip account password (M0004063) - link
PolycomIP650 v.4.5 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting (M0003970) - link
- Feature: Added 802.1x phone supplicant authentication
- Feature: Check if mac address is not already used for another phone (M0003853) - link
- Feature: Added possibility to configure Push URL (M0003970) - link
PolycomIP650 v.4.4 (intermediate version) Show release notesHide release notes
-
- PolycomIP650 v.4.3 (intermediate version) Show release notesHide release notes
- Bugfix: When the Directory is set to "Local", the phonebook is erased after each reboot (M0003539) - link
- Feature: Add "Clear" for the Directory
- Bugfix: Replaces absolute symbolic links with relative symbolic links, due to an incompatibility with the new TFTP server.
- PolycomIP650 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP650 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomIP650 v.4.22.3 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file. (M9319) - link
PolycomIP560
- PolycomIP560 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomIP560 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomIP560 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: This resource now supports Escaux SOP Templating language for the speeddials. (M7595) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. The speedials were refactored
- Improvement: Removed slow rexec comands during apply changes (M7787) - link
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. The softkey configuration was misleading and not correctly applied. (M7634) - link
- Feature: Configurable voicemail service extension. (M7747) - link
PolycomIP560 v.4.9 (intermediate version) Show release notesHide release notes
- Feature: Option which remove the ability to edit contacts in the directory of the phone (M4249) - link
PolycomIP560 v.4.8 (intermediate version) Show release notesHide release notes
- Feature: Add an extra value in the Message Type drop down (M0004180) - link
- Feature: Be able to indicate something else than the SOPs as the server 1 and server 2 (M0004149) - link
PolycomIP560 v.4.7 (intermediate version) Show release notesHide release notes
- Feature: added the possibility to not append the extension at the end of the idle url.
PolycomIP560 v.4.6 (intermediate version) Show release notesHide release notes
- Feature: Configurable sip account password (M0004063) - link
PolycomIP560 v.4.5 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting (M0003970) - link
- Feature: Added 802.1x phone supplicant authentication
- Feature: Check if mac address is not already used for another phone (M0003853) - link
- Feature: Added possibility to configure Push URL (M0003970) - link
PolycomIP560 v.4.3 (intermediate version) Show release notesHide release notes
- Bugfix: Replaces absolute symbolic links with relative symbolic links, due to an incompatibility with the new TFTP server. (M0003591) - link
PolycomIP560 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP560 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomIP560 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomIP560 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
PolycomIP560 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: Jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
PolycomIP560 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomIP560 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
PolycomIP331
- PolycomIP331 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomIP331 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomIP331 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: This resource now supports Escaux SOP Templating language for the speeddials. (M7595) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. The speedials were refactored
- Improvement: Removed slow rexec comands during apply changes (M7787) - link
- Improvement: Removed unsupported g722 from the porposed codec list (M5333) - link
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. The softkey configuration was misleading and not correctly applied. (M7634) - link
- Feature: Configurable voicemail service extension. (M7747) - link
PolycomIP331 v.4.9 (intermediate version) Show release notesHide release notes
- Feature: Option which removes the ability to edit contacts in the phone's directory (M4249) - link
PolycomIP331 v.4.8 (intermediate version) Show release notesHide release notes
- Feature: Add an extra value in the "Message Type" drop down menu (M0004180) - link
- Feature: Added the possibility for the phone to register to an external server (M0004149) - link
PolycomIP331 v.4.7 (intermediate version) Show release notesHide release notes
- Feature: added the possibility to not append the extension at the end of the idle url
PolycomIP331 v.4.6 (intermediate version) Show release notesHide release notes
- Feature: Configurable sip account password (M0004063) - link
PolycomIP331 v.4.5 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting (M0003970) - link
- Feature: Check if mac address is not already used for another phone (M0003853) - link
- Feature: Added possibility to configure Push URL (M0003970) - link
PolycomIP331 v.4.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: setting directory to local still generates directory (M0005979) - link
- Bugfix: generating directory doesn't work on cluster (M0005979) - link
PolycomIP331 v.4.4 (intermediate version) Show release notesHide release notes
- Feature: Support for phone 802.1x supplicant
PolycomIP331 v.4.3 (intermediate version) Show release notesHide release notes
- Bugfix: Absolute symbolic links replaced with relative symbolic links to fix an incompatibility with the new TFTP server.
PolycomIP331 v.4.24.1 (intermediate version) Show release notesHide release notes
- Improvement: Restrict INVITE to known IP (MS-474)
PolycomIP331 v.4.24.0 (intermediate version) Show release notesHide release notes
- Feature: Compatibility with both module 4.x and module 5.x (MS-226)
PolycomIP331 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP331 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomIP331 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomIP331 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
PolycomIP331 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: PC ethernet port can be disabled (M6773) - link
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
PolycomIP331 v.4.21 (intermediate version) Show release notesHide release notes
- Bugfix: Not using sop2 when sop2 is the same as sop1 in order to avoid double calls when sop1 fails to answers (M7141) - link
- Deprecated: Configuration files are not generated on standalone SOPs (M7914) - link
PolycomIP331 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomIP331 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
PolycomIP450
- PolycomIP450 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomIP450 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomIP450 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: This resource now supports Escaux SOP Templating language for the speeddials. (M7595) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. The speedials were refactored
- Improvement: Removed slow rexec comands during apply changes (M7787) - link
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. The softkey configuration was misleading and not correctly applied. (M7634) - link
- Feature: Configurable voicemail service extension. (M7747) - link
PolycomIP450 v.4.9 (intermediate version) Show release notesHide release notes
- Feature: Option which removes the ability to edit contacts in the directory of the phone (M4249) - link
PolycomIP450 v.4.8 (intermediate version) Show release notesHide release notes
- Feature: Added a new push message type option : All (M0004180) - link
- Feature: Be able to indicate something else than the SOPs as the server 1 and server 2 (M0004149) - link
PolycomIP450 v.4.7 (intermediate version) Show release notesHide release notes
- Feature: added the possibility to not append the extension at the end of the idle url
PolycomIP450 v.4.6 (intermediate version) Show release notesHide release notes
- Feature: Configurable sip account password (M0004063) - link
PolycomIP450 v.4.5 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting (M0003970) - link
- Feature: Added 802.1x phone supplicant authentication
- Feature: Check if mac address is not already used for another phone (M0003853) - link
- Feature: Added possibility to configure Push URL (M0003970) - link
PolycomIP450 v.4.3 (intermediate version) Show release notesHide release notes
- Feature: Added Directory storage option "clear directory"
- Bugfix: When the Directory storage is set to "Local", the phonebook was erased after each reboot (M0003539) - link
- Bugfix: Replaces absolute symbolic links with relative symbolic links, to fix an incompatibility with the new TFTP server
PolycomIP450 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP450 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomIP450 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomIP450 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
PolycomIP450 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: PC ethernet port can be disabled (M6773) - link
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
PolycomIP450 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomIP450 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
PolycomIP7000
- PolycomIP7000 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomIP7000 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomIP7000 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: This resource now supports Escaux SOP Templating language for the speeddials. (M7595) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. The speedials were refactored
- Improvement: Removed slow rexec comands during apply changes (M7787) - link
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. The softkey configuration was misleading and not correctly applied. (M7634) - link
- Feature: Configurable voicemail service extension. (M7747) - link
PolycomIP7000 v.4.9 (intermediate version) Show release notesHide release notes
- Feature: Option which remove the ability to edit contacts in the directory of the phone (M4249) - link
PolycomIP7000 v.4.8 (intermediate version) Show release notesHide release notes
- Feature: Add an extra value in the Message Type drop down (M0004180) - link
- Feature: Be able to indicate something else than the SOPs as the server 1 and server 2 (M0004149) - link
PolycomIP7000 v.4.7 (intermediate version) Show release notesHide release notes
- Feature: added the possibility to not append the extension at the end of the idle url
PolycomIP7000 v.4.6 (intermediate version) Show release notesHide release notes
- Feature: Configurable sip account password (M0004063) - link
PolycomIP7000 v.4.5 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting (M0003970) - link
- Feature: Added 802.1x phone supplicant authentication
- Feature: Check if mac address is not already used for another phone (M0003853) - link
- Feature: Added possibility to configure Push URL (M0003970) - link
PolycomIP7000 v.4.3 (intermediate version) Show release notesHide release notes
- Bugfix: When the Directory is set to "Local", the phonebook is erased after each reboot (M0003539) - link
- Feature: Add "Clear" for the Directory
- Bugfix: Replaces absolute symbolic links with relative symbolic links, due to an incompatibility with the new TFTP server
PolycomIP7000 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP7000 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomIP7000 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomIP7000 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
PolycomIP7000 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
PolycomIP7000 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomIP7000 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
PolycomVVX310
- PolycomVVX310 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomVVX310 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomVVX310 v.5.0.1 (intermediate version) Show release notesHide release notes
- Bugfix: polycom with mac 64:16:7F and old firmware (backport)
PolycomVVX310 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support one expansion module (color or paper display) (M8249) - link
- Feature: Speeddials and BLF can be mixed, and have absolute positions
- Feature: Configurable voicemail service extension (M7747) - link
- Improvement: BLF (supervision) uses the phones LED to show extended status
- Improvement: Removed slow operations during apply changes (M7787) - link
- Improvement: Enable video setting (M7777) - link
- Bugfix: The DND softkey is fully deactivated
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: The softkey configuration was misleading and not correctly applied (M7634) - link
- Limitation: The DND softkey cannot be hidden
- Limitation: Not compatible with Personal User Mobility (PUM)
- Limitation: Not compatible with m.Connect
PolycomVVX310 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomVVX310 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomVVX310 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomVVX310 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
PolycomVVX310 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: Jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
- Feature: You are now able to configure the backlight intensity (M7222) - link
PolycomVVX400
- PolycomVVX400 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomVVX300
- PolycomVVX300 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomVVX410
- PolycomVVX410 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomVVX600
- PolycomVVX600 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomIP670
- PolycomIP670 v.5.1.1 Show release notesHide release notes
- Bugfix: Support for UTF-8 characters (M9321) - link
- Bugfix: Old configuration was not correctly deleted when doing an "Apply changes" (M8764) - link
- Bugfix: The voicemailbox associated to the phone when no extension is associated was set to the extension 8500
- Bugfix: Showing the extension and the first name on the phone label was not possible (M9367) - link
- Limitations: The caching only works with SMP version >= 5.3.0
PolycomIP670 v.5.1.0 (intermediate version) Show release notesHide release notes
- Improvement: Support dynamic reconfiguration on the SOP for m.Connect (M8992) - link
- Improvement: Support PUM login of virtual phones (SVE2) with ETL (M8822) - link
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Bugfix: The DND softkey is now hidden when DND is disabled (M7743) - link
- Bugfix: The 'Call Forward' an 'DND' menu entries are now hidden when the corresponding option is disabled (M7744) - link
- Bugfix: The phone does no more flood the server with subscription messages when DND is disabled (M7274) - link
- Limitation: date and hour format rendering is dependant of the language used on the phone. (M0)
- Limitation: BLF unavailable status is not interpreted by the phone. (M0)
- Limitation: The use of expension module, requires to make a reboot of the phone after his first boot. (M0)
- Limitation: if storage is set to 'Clear directory' and speeddials are configured, the directory will not be empty. (M0)
- Limitation: if storage is set to 'From SOP' and blf are configured, contacts with the same extension will not be visible in the directory. (M0)
- Limitation: if storage is set to 'Local' extension added in the directory will be also added as speeddial. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: mobile phone number is not displayed in the corporate directoy. (M0)
- Limitation: the resource only supports ASCII characters in the variables. (M0)
PolycomIP670 v.5.0.0 (intermediate version) Show release notesHide release notes
- Feature: This resource now supports Escaux SOP Templating language for the speeddials. (M7595) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. The speedials were refactored
- Improvement: Removed slow rexec comands during apply changes (M7787) - link
- Bugfix: "Default" qualify policy do not respect global (server) settings (M7307) - link
- Bugfix: Potential update impact level 1 : no critical impact expected. Update can be applied without risk of breaking critical functionality. The softkey configuration was misleading and not correctly applied. (M7634) - link
- Feature: Configurable voicemail service extension. (M7747) - link
PolycomIP670 v.4.9 (intermediate version) Show release notesHide release notes
- Feature : Option which remove the ability to edit contacts in the directory of the phone (M4249) - link
PolycomIP670 v.4.8 (intermediate version) Show release notesHide release notes
- Feature: Add an extra value in the Message Type drop down (M0004180) - link
- Feature: Be able to indicate something else than the SOPs as the server 1 and server 2 (M0004149) - link
PolycomIP670 v.4.7 (intermediate version) Show release notesHide release notes
- Feature: added the possibility to not append the extension at the end of the idle url
PolycomIP670 v.4.6 (intermediate version) Show release notesHide release notes
- Feature: Configurable sip account password (M0004063) - link
- Bug fix: re-added softkey configuration.
PolycomIP670 v.4.5 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting (M0003970) - link
- Feature: Added 802.1x phone supplicant authentication
- Feature: Check if mac address is not already used for another phone (M0003853) - link
- Feature: Added possibility to configure Push URL (M0003970) - link
PolycomIP670 v.4.4 (intermediate version) Show release notesHide release notes
- Feature: Added possibility to disable call waiting
- Deprecated: Significant improvements have been done in a higher version
PolycomIP670 v.4.3 (intermediate version) Show release notesHide release notes
- Bug fix: When the Directory is set to "Local", the phonebook is erased after each reboot (M0003539) - link
- Feature: Add "Clear" for the Directory
- Bug fix: Replaces absolute symbolic links with relative symbolic links, due to an incompatibility with the new TFTP server.
PolycomIP670 v.4.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: Fixing the setting up of Url-dialing value in the config file (M9319) - link
- Bugfix: Unable to update dot1x configuration when caching was activated (M12957) - link
- Improvement: Allow to configure SIP Session timer (M19716) - link
PolycomIP670 v.4.23.0 (intermediate version) Show release notesHide release notes
- Feature: When hanging up a call with the release cause 8-preemption- the polycom will now play the preemption tone (M7301) - link
- Improvement: Code optimization in order to let 'Apply Changes' go faster. (M8287) - link
- Bugfix: Cache is now based on resource_id key and is validate at each "Apply changes". (M9552) - link
PolycomIP670 v.4.22.2 (intermediate version) Show release notesHide release notes
- Bugfix: Old directory entries were not removed when directory was set to 'local'. (M8065) - link
PolycomIP670 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
PolycomIP670 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomIP670 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
SyncLDAP
SyncLDAP v.1.9.1 (intermediate version) Show release notesHide release notes
- Improvement: Display owner of extension that is modified (M8804) - link
- Deprecated: Accidental debug caused out-of-memory (M0)
Polycom Virtual Phone
- Polycom Virtual Phone v.2.0.1 Show release notesHide release notes
- Improvement: The default value for device based Forward and DND has been changed to 'Disabled' (M9367) - link
- Improvement: Added the possibility to configure the extension to access voicemail (M9367) - link
- Improvement: "Clear Directory" was not possible on the Polycom Virtual Phone (M9364) - link
- Bugfix: Accented characters were not working (M9366) - link
Polycom Virtual Phone v.2.0.0 (intermediate version) Show release notesHide release notes
- Feature: Support dynamic reconfiguration on the SOP for m.Connect (M8822) - link
- Limitation: DND and Forward features are enabled by default in the resource. (M0)
- Limitation: The voicemail extenion is not configurable in the resource. (M0)
- Limitation: directory's filter may not work properly. (M0)
- Limitation: The display's option 'Extension + firstname' display only the extension. (M0)
Polycom Virtual Phone v.1.12.2 (intermediate version) Show release notesHide release notes
- Bugfix: Configuration file wasn't generated since version 1.12.1 (M11404) - link
Polycom Virtual Phone v.1.12.1 (intermediate version) Show release notesHide release notes
- Improvement: Code optimization to make the "Apply Changes" faster (M5991) - link
- Improvement: Adding ext + firstname option (M8791) - link
- Deprecated: the configuration of the virtual phone was no more generated (M11404) - link
Polycom Virtual Phone v.1.12.0 (intermediate version) Show release notesHide release notes
- Feature: Adding video codec to be used with VVX1500 (M6437) - link
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.1.2 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.1.1 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.2.8.3 Show release notesHide release notes
- Improvement: Prevent asterisk to start without binding on request SIP or IAX addresses (M8732) - link
- Improvement: Added the possibility to add polycom specific preemption reason header (M7301) - link
- Improvement: Added the possibility to deactivate the Jitter Buffer when bridging two IAX channels (M8083) - link
- Improvement: Added the possibility to configure the maximum number of simultaneous calls (M9139) - link
- Improvement: Ignore the installation of Dahdi on a VSOP (M9078) - link
- Bugfix: Activating the Jitter Buffer and the IAX trunking was causing audio quality issue (M8083) - link
- Bugfix: There was a one way audio when calling a device which answers with two codecs and when DirectMedia is disabled (M9083) - link
- Bugfix: No Directmedia when calling a phone in G729 only via a Queue and when the caller supports COLP (M9083) - link
- Bugfix: The SDP in the OK could be different from the SDP provided in the provisional call progress (M9083) - link
- Bugfix: Additional SIP sockets were not compatible with dynamic address on a SIP trunk (M9187) - link
- Communication Server v.2.8.2 (intermediate version) Show release notesHide release notes
- Feature: Relax dialog id check in SIP dialogues (M8381) - link
- Improvement: Reduce module installation time on high latency networks (M8766) - link
Network
New resource versions
SNOMM9 v.1.3 (intermediate version) Show release notesHide release notes
- Deprecated: Using this resource version will remove all SIP peers
- Bugfix: SNOM M9 is now properly provisioned when the DHCP module is installed. (M7097) - link
New action versions
- STARTAPPLICATION.3.00
- STARTAPPLICATION.3.00 v.1.00 Show release notesHide release notes
- Improvement: Compatibility with the Communication Server module
- Limitation: The variables LastUserOffice, LastUserDepartment, LastUserLogin, LastUserOwner are not set (M6757) - link
STARTFAXAPPLICATION.3.10
- STARTFAXAPPLICATION.3.10 v.3.10 Show release notesHide release notes
- Improvement: Add robustness in the user credential file generation (M0005031) - link
- Improvement: Do not use templates if not present
- Limitation: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.
- Limitation: Beware, using email to authenticate your users is deprecated. If you still use it we strongly recommend to use the extension instead. If you still use the email to authenticate, make that the email address is not used in more than one local fax extension.
STARTDYNAMICAPPLICATION.7.6
- STARTDYNAMICAPPLICATION.7.6 v.1.0 Show release notesHide release notes
- Bugfix: Two MaximumCallDuration parameters were configurable, but none of them were taken into account (M6431) - link
- Bugfix: The callflow number was sometimes not fetched correctly on the asterisk-1.2x module
MapDDI
Included components
Modules
Resources
Actions
Version 3.1.0 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
| Action |
| Reboot SOP |
| Reinstall net.Dektop |
| Reinstall net.Console |
Changed components
Show changed componentsHide changed components
New module versions
Mail Server
SNMP Agent
SNMP Agent v.2.13.1 (intermediate version) Show release notesHide release notes
- Bugfix: Power Supplies redundancy probe always showed 'Warning' status (M6433) - link
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
SNMP Agent v.2.13.0 (intermediate version) Show release notesHide release notes
- Feature: Adding VSOP probes (CPU, Memory, Channels) (M5974) - link
SNMP Agent v.2.12.0 (intermediate version) Show release notesHide release notes
- Feature: Report and graph SIP and IAX trunks usage (M3413) - link
SNMP Agent v.2.11.2 (intermediate version) Show release notesHide release notes
- Improvement: Enable Mesh sip trunk probe with baseline version 1.4.3 on baseline 2
Web Server
Web Server v.1.1.4 (intermediate version) Show release notesHide release notes
- Improvement: Enabled mod_rewrite (M0006817) - link
- Deprecated: webserver monitoring process is not restarted after install
Web Server v.1.1.3 (intermediate version) Show release notesHide release notes
- Bugfix: Make webserver monitoring process compatible with productized SMP
- Deprecated: webserver monitoring process is not restarted after install
Application Management Server
Network
- Network v.1.20.0 Show release notesHide release notes
- Feature: Allow configuration of eth1 in case of High Availability, without a shared address (M8073) - link
- Improvement: Removed obsolete cronjob for a better vSOP performance (M7975) - link
- Limitation: Baseline 1 not supported (M7975) - link
- Deprecated: Routes not correctly configured on a standalone sop (M9262) - link
Network v.1.19.0 (intermediate version) Show release notesHide release notes
- Feature: Support for optional High Availability on eth1
- Bugfix: Routes were not taken into account when vSOP module was installed on baseline 3
- Bugfix: Ethernet bridge was not working properly on vSOP hosts on baseline 3
- Bugfix: Default gateway was added on both the main and the alias interfaces in case of High Availability. Routes were not added in that case (M7783) - link
Network v.1.18.1 (intermediate version) Show release notesHide release notes
- Bugfix: ssh would only bind on localhost on first installation/upgrade
Network v.1.18.0 (intermediate version) Show release notesHide release notes
- Feature: Support for bind9 caching DNS server (M7111) - link
- Improvement: Improve how we manage the sshd_config file (M7305) - link
- Improvement: Don't use DNS for incoming ssh connections
- Deprecated: When installing/upgrading for the first time, ssh always binds on localhost only
Network v.1.17.1 (intermediate version) Show release notesHide release notes
- Bugfix: Packages were not cached between SOP reboots (M7066) - link
- Improvement: DNS search domain is now configurable (M6925) - link
Network v.1.17.0 (intermediate version) Show release notesHide release notes
- Improvement: Expose eth1 interface configuration to other modules (M6481) - link
Dahdi
Dahdi v.1.2.0 (intermediate version) Show release notesHide release notes
- Feature: limited support for DAHDI compatible interface cards (M6920) - link
Dahdi v.1.1.0 (intermediate version) Show release notesHide release notes
- Bugfix: Installation inside a vSOP was not working (M0)
High Availability
- High Availability v.2.7.1 Show release notesHide release notes
- Bugfix: The Shell plugin could cause the Shell to become unusable (M8068) - link
- Bugfix: Backport from 2.8.0 - Voicemails were not synced for communication server modules (M8602) - link
- Bugfix: Backport from 2.8.0 - Fixed incomplete synchronization of Profile Parameters between active and standby sops (M8674) - link
High Availability v.2.7.0 (intermediate version) Show release notesHide release notes
- Feature: Allow configuration of eth1 without a shared address (M8073) - link
High Availability v.2.6.0 (intermediate version) Show release notesHide release notes
- Limitation: Standard console sizes (24x80 & 30x80) are not enough to load the Shell with the new HA Shell plugin. A remote resizable Shell window might be required (M0008068) - link
- Feature: High availability support for eth1 (M0)
- Improvement: Inform SMP of state change to avoid polling, required for SMP 5.0.0 (M0006852) - link
- Improvement: On Baseline 2+, set Standby mode on modules that are installed after High Availability in case the SOP is in Standby mode (M0006816) - link
- Improvement: The Shell plugin now detects processes that should only run in Active mode and permits to force switching to Standby mode (M0006816) - link
- Bugfix: Prevent synchronizing profile parameters when there is already a synchronization running (M7772) - link
Communication Server
- Communication Server v.2.8.1 Show release notesHide release notes
- Improvement: Add a timeout for external scripts (AGI) (M7462) - link
- Bugfix: An invalid host value for a peer could not be corrected by a reload (M8144) - link
- Bugfix: Minmessage and maxsilence parameters for voicemail were sometimes not correctly set (M7996) - link
- Bugfix: Incorrect hangup direction in Hangup manager event (M7782) - link
- Bugfix: No ringback tone when dialing a phone with a new codec after answering a call (M8257) - link
- Bugfix: Multi-codec issue when dynamic feature or recording is used (M6921) - link
- Bugfix: In a multi codec environment the reinvite was not always sent to set up the call in peer to peer
- Bugfix: The variable SIP_CODEC was not taken into account for inbound call (M8388) - link
- Bugfix: Originate failed because the macro could loose their context (M8463) - link
- Bugfix: Call transfer using ' *' unstable (M8209) - link
Communication Server v.2.8.0 (intermediate version) Show release notesHide release notes
- Feature: Be able to configure Return Path for email sent by asterisk (M2601) - link
- Feature: Added support for remote party presence/extended presence (M7384) - link
- Feature: Detection of voicemail outcome: minimum length and maximum silence of voicemails are now configurable (M7996) - link
- Improvement: Use escaux-minutely for minutely cronjobs (M7759) - link
- Bugfix: Parsing of "Additional SIP sockets" was not working in some cases, with multiple addresses (M7903) - link
- Bugfix: In some call transfer scenarios old mediastreams could remain in the list (M7489) - link
- Bugfix: Hangup cause was not always propagated by the Dial application (M8129) - link
- Bugfix: Reason header was not parsed in the Bye message (M8129) - link
- Bugfix: Asterisk was stopping trying to register SIP Trunks after receiving a 403 (M7917) - link
- Bugfix: The iax trunk frequency set did not always match the one configured (M8044) - link
Communication Server v.2.7.0 (intermediate version) Show release notesHide release notes
- Bugfix: Dynamic rtp payload type were not negotiated properly when directmedia is used (M7696) - link
- Bugfix: H263+ not working because of a typo in the SDP (M7906) - link
- Bugfix: incoherent codec negotiation in case of video support in a multi-audio code environment (M7911) - link
- Bugfix: When using numeric DSCP, the TOS is computed with the TOS=4 *DSCP and the assumption that ECN=0 (M7784) - link
- Bugfix: DSCP was not set on Video RTP (M7784) - link
- Feature: Add voicemail lite and voicemail minimal to be used with VoicemailMenu action. (M7148) - link
- Deprecated: Voicemail for new users is not working until the process is manually reloaded or restarted
Communication Server v.2.6.1 (intermediate version) Show release notesHide release notes
- Bugfix: Video was not working when using the variable SIP_CODEC (M7518) - link
- Bugfix: The caller video codec was not preserved when transiting on sip trunks (M7518) - link
- Bugfix: Memory leak and locking problems in external notify (M7648) - link
- Bugfix: Potential crash in external notify (M7479) - link
Communication Server v.2.6.0 (intermediate version) Show release notesHide release notes
- Feature: optional access to the Manager Interface (M7341) - link
- Bugfix: There was no ringback tone or music on hold in case of codec change after an answer or a call progress (M7326) - link
- Bugfix: channelGroup not cleanup after a call transfer via the API (M7418) - link
- Bugfix: The buffer refer_to was too small (M7401) - link
- Bugfix: There was no ring tone after a blind transfer via net.Console or net.Desktop (M7488) - link
- Bugfix: The deadlock prevention script was not started automatically (M7509) - link
Communication Server v.2.5.0 (intermediate version) Show release notesHide release notes
- Feature: Configurable register timers for IAX (M7069) - link
- Feature: Configurable register timers for SIP (M7070) - link
- Feature: Added the possibility to configure the IAX trunk frequency (M6951) - link
- Feature: Allow decimal values for Differentiated Services fields (M7071) - link
- Improvement: Relax DTMF is now always set to yes
- Improvement: Default SIP Timer T1 for the re-transmission is now a fix value of 500 ms (M6777) - link
- Improvement: Removed hardcoded callflows for extensions 8500,8501,8502,8505 (M6701) - link
- Limitation: Core dump analysis is not possible in this version due to missing debug symbols
Communication Server v.2.4.6 (intermediate version) Show release notesHide release notes
- Bugfix: Originate failed because the macro could loose their context (M8463) - link
SOP API
SOP API v.4.2.1 (intermediate version) Show release notesHide release notes
- Bugfix: ccRetreiveCall from net.Desktop was not working (M7771) - link
- Deprecated: error in a db query of dbGetProfileParameter (M8358) - link
SOP API v.4.2.0 (intermediate version) Show release notesHide release notes
- Feature: Allow authorization through http headers (M0006817) - link
- Feature: Allow letters in extensions (M0007215) - link
- Feature: Allow exposing the API in JSON format (M0006948) - link
- Improvement: Allow to retrieve "dynamic" or "static" status of a QueueMember with ccGetQueueMembers (M6834) - link
- Feature: Allow "+" character in usernames and phone numbers
- Feature: Added the possibility to make a ccRetrieveCall based on the channel ID (M7246) - link
- Feature: Added translated statuses when available (M7243) - link
SOP API v.4.1.10 (intermediate version) Show release notesHide release notes
- Feature: Backport from 4.10.0, Added pumLogin and pumLogout that allow to connect and disconnect extension with PUM enabled on a given phone. (M9738) - link
Kernel
Sangoma Card Support
- Sangoma Card Support v.2.9.0 Show release notesHide release notes
- Improvement: Upgraded to Netborder version 4.4.5 (M8735) - link
- Improvement: upgraded wanpipe drivers to version 7.0.10 (M8735) - link
- Bugfix: Overlap Dialing, Remote T302 timer expiration not reported to upper layer (M8735) - link
Sangoma Card Support v.2.8.0 (intermediate version) Show release notesHide release notes
- Improvement: Upgraded to Netborder 4.4.4 (M8417) - link
- Bugfix: Overlap Dialing without DNIS was causing the call to be hangup (M8417) - link
Sangoma Card Support v.2.7.0 (intermediate version) Show release notesHide release notes
- Feature: Support for baseline 2.4.0 (M7405) - link
Sangoma Card Support v.2.6.1 (intermediate version) Show release notesHide release notes
- Improvement: Upgrade NetBorder to version 4.4.4 (M0)
- Bugfix: Allowed call to be routed when SENDING complete IE is received and no DNIS in the SETUP message (M0)
Sangoma Card Support v.2.6.0 (intermediate version) Show release notesHide release notes
- Feature: Configurable the interdigit timeout ISDN T302 (M7700) - link
- Improvement: Upgrade to NetBorder 4.4.3 (M7700) - link
Sangoma Card Support v.2.5.0 (intermediate version) Show release notesHide release notes
- Limitation: After an upgrade, an apply-sop-change is needed
- Improvement: Updated Netborder to version 4.4.2 (M7448) - link
- Improvement: Updated Sangoma drivers to version 7.0.2
- Improvement: Avoid sending mail with gateway process status every minute (M6493) - link
- Improvement: Improve Shell for Sangoma 2 (M6598) - link
net.Desktop
- net.Desktop v.2.28.2 Show release notesHide release notes
- Bugfix: The status in the window of the profile parameters is not the same as the actual status (M8733) - link
- Bugfix: Missing file would lead to unusable net.Desktop (M7947) - link
- Improvement: Improve download page (M8773) - link
net.Desktop v.2.28.1 (intermediate version) Show release notesHide release notes
- Improvement: The secure connection configuration between the net.Desktop and SOP has been improved (M7305) - link
- Bugfix: net.Desktop now uses the Windows Classic look and feel to avoid freezes when using Windows. (M7429) - link
- Bugfix: net.Desktop now supports Java 7 Update 45 (1.7.0_45). This Java version breaks property tag in JNLP. (M7484) - link
net.Desktop v.2.28.0 (intermediate version) Show release notesHide release notes
- Feature: Java 7 Support for the Java WebStart version
- Feature: Quick fax was added. Documentation regarding networking requirements were updated. Mail server module 1.4.0 and Fax Server 2.1.0 are needed for this feature. (M6911) - link
- Improvement: The Legacy fax support and the new Quick fax feature are now activable/deactivable in the resource (M6910) - link
- Bugfix: All accented characters now are displayed correctly with Java 7 (M6719) - link
- Bugfix: First sync will always fail using java 7 (M6626) - link
- Bugfix: net.Desktop does not fetch new voicemails with Java7 (M6715) - link
- Improvement: chat/sms screen does not update chat function availability automatically (M6571) - link
- Bugfix: Quick number conversion now displays the PBX prefix correctly when the number contains non digit characters. (M6587) - link
- Bugfix: The IP address contained in the installer now depends on the IP address of the interface that has the default route (M6480) - link
- Bugfix: Switch from wifi to ethernet crash chat (M5946) - link
- Bugfix: From time to time call transfer window disappear right after the answer on the consultation call (M7228) - link
- Bugfix: Characters < and ENTER were not displayed correctly (M6572) - link
Call Management
- Call Management v.1.7.3 Show release notesHide release notes
- Bugfix: Incorrect package version was installed (M8157) - link
- Bugfix: Force usage of UTF-8 when reading from the AMI. This fixes accented characters in net.Console. (M9040) - link
Call Management v.1.7.2 (intermediate version) Show release notesHide release notes
- Improvement: Added the possibility to add a phone in a queue in paused state (M3668) - link
- Bugfix: The caller used to hear the extension where the call has been parked (M7860) - link
- Bugfix: Don't refresh the Communication Server connection when reloading the configuration (M8157) - link
net.Console
- net.Console v.3.6.1 Show release notesHide release notes
- Improvement: When creating input dialog, reference the main frame to make sure it is put in front of it. Added logging when park button is pressed. ORTS 10101231
- Improvement: Improve download page (M8774) - link
net.Console v.3.6.0 (intermediate version) Show release notesHide release notes
- Bugfix: net.Console no more freezes and timeouts when a transfer is aborted and the first call rapidly put off hold with a polycom. (M7782) - link
net.Console v.3.5.4 (intermediate version) Show release notesHide release notes
- Improvement: Log SIP MESSAGE except for controller context updates (M8079) - link
- Bugfix: call going through after clicking on login and console is still in pause (M3668) - link
- Bugfix: Upgrade embedded JRE to 1.6.0_45 (M7785) - link
- Bugfix: Old calls appeared in supervised area (M7790) - link
net.Console v.3.5.3 (intermediate version) Show release notesHide release notes
- Bugfix: Calls in a general queue were visible in all other general queues (M7152) - link
- Deprecated: Higher version contains major improvements (M0)
net.Console v.3.5.2 (intermediate version) Show release notesHide release notes
- Bugfix: Calls to personal queue were displayed in all clients (M7101) - link
- Bugfix: Show all supervised calls did not affect personal queue calls (M7132) - link
- Bugfix: Tone cancellation was deactivated for cancelled outgoing call (M7142) - link
- Deprecated: Higher version contains major improvements (M0)
net.Console v.3.5.1 (intermediate version) Show release notesHide release notes
- Bugfix: Startup URL was not always loaded (M6952) - link
- Bugfix: Speeddials labels could be invisible when resizing the speeddials (M6956) - link
- Bugfix: Could not call selected contact using the ENTER key, after using the arrows to select the contact (M0006967) - link
- Deprecated: Higher version contains major improvements (M0)
net.Console v.3.5.0 (intermediate version) Show release notesHide release notes
- Feature: Added phone status in speeddials (M0006556) - link
- Improvement: Always connect to the SOP network interface that has the default route (M0006481) - link
- Bugfix: Reliability when loading big directories (M0005947) - link
- Bugfix: Wrong contact was dialed when user was too fast (M0006479) - link
- Bugfix: Call history entries could appear twice (M0006607) - link
- Bugfix: Remove every mention of Outlook import in the preferences (M0006645) - link
- Bugfix: Authentication issue when using specific passwords (M0006201) - link
- Deprecated: Higher version contains major improvements (M0)
New resource versions
SangomaBRI
SangomaBRI v.2.2.0 (intermediate version) Show release notesHide release notes
- Improvement: Added support for NetBorder 4.4.1 (M7448) - link
- Bugfix: No ringing tone in case of call forward to the public network (M7470) - link
SangomaPRI
SangomaPRI v.2.1.0 (intermediate version) Show release notesHide release notes
- Feature: Added the possibility to configure the overlap dialing (M7748) - link
- Improvement: Added support for NetBorder 4.4.1
- Bugfix: No ringing tone in case of call forward to the public network (M7470) - link
PolycomIP650
PolycomIP650 v.4.22.1 (intermediate version) Show release notesHide release notes
- Bugfix: Files are not generated on standalone SOPs (M7914) - link
PolycomIP650 v.4.22.0 (intermediate version) Show release notesHide release notes
- Feature: PC ethernet port can be disabled (M6773) - link
- Feature: Headset echo cancelation can be configured (M5788) - link
- Feature: jitter buffer maximum size, jitter buffer minimum size, jitter buffer shrink, Retry TimeOut and Retry Max Count can be configured (M6774) - link
PolycomIP650 v.4.20 (intermediate version) Show release notesHide release notes
- Feature: Support of VVX310 (M7043) - link
PolycomIP650 v.4.19.1 (intermediate version) Show release notesHide release notes
- Bugfix: Unable to update dot1x configuration when caching was activated. (M12957) - link
net.Console X900
net.Console X700
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.0.10 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Aastra Phone Support
- Aastra Phone Support v.2.2.3 Show release notesHide release notes
- Bugfix: All symbolic links were broken by the postsync task (M0)
- Bugfix: Speeddials were not added to virtualphone after pum login (M8652) - link
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.0.9 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
Aastra Phone Support
- Aastra Phone Support v.2.2.2 Show release notesHide release notes
- Bugfix: PUM was not working properly in case of High Availability (M8613) - link
- Deprecated: The symbolic links are broken by the postsync task (M0)
Aastra Phone Support v.2.2.1 (intermediate version) Show release notesHide release notes
- Improvement: Added the possibility to configure the DSCP value for SIP and RTP (M8371) - link
- Bugfix: Reusing mac's on different resources no longer breaks provisioning (M7787) - link
- Bugfix: Debian packages were synchronized to /tmp instead of /data/cache/deb (M8376) - link
- Deprecated: The symbolic links are broken by the postsync task (M0)
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.0.8 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Communication Server
- Communication Server v.2.4.5 Show release notesHide release notes
- Bugfix: Incorrect hangup direction in Hangup manager event (M7782) - link
- Bugfix: No ringback tone when dialing a phone with a new codec after answering a call (M8257) - link
- Bugfix: Multi-codec issue when dynamic feature or recording is used (M6921) - link
- Bugfix: In a multi codec environment the reinvite was not always sent to set up the call in peer to peer
- Bugfix: The variable SIP_CODEC was not taken into account for inbound call (M8388) - link
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.0.7 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
There are no special actions to perform during the upgrade.
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
- ReportQDR
- ReportQDR v.1.6 Show release notesHide release notes
- Bugfix: filter on COMPLETED was not working (M6294) - link
- Bugfix: SMP vulnerability fix (M3537) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.0.6 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
| Action |
| Restart Asterisk |
| Reboot all phones |
Changed components
Show changed componentsHide changed components
New module versions
- Unidata/Incom Phone Support
Third Party Remote Access
Cisco Phone Support
Algo Device Support
Aastra Phone Support
FAX Server
SNOM Phone Support
Communication Server
- Communication Server v.2.4.4 Show release notesHide release notes
- Bugfix: There was no ringback tone or music on hold in case of codec change after an answer or a call progress (M7326) - link
- Bugfix: There was no ring tone after a blind transfer via net.Console or net.Desktop (M7488) - link
Communication Server v.2.4.3 (intermediate version) Show release notesHide release notes
- Bugfix: Some channels were never removed from the ChannelGroup (M7418) - link
Call Management
- Call Management v.1.7.1 Show release notesHide release notes
- Bugfix: Interleaved synchronized blocks would result in a deadlock. (M7475) - link
- Bugfix: Remote phone updates where not propagated to the netConsole. (M0)
New resource versions
UnidataWireless7800
- UnidataWireless7800 v.1.2 Show release notesHide release notes
- Bugfix: Corrected force short preamble to take into account SMP configuration settings (M0005057) - link
- Feature: Expose Try_Beacon_Signal_Level option in the ressource (M0005055) - link
- Feature: Expose Register_Expire option in the ressource (M0005054) - link
Aastra6755i
Aastra6755i v.1.8.0 (intermediate version) Show release notesHide release notes
- Bugfix: phone was exiting corporate directory when using the corporate directory and the Idle URL together. (M6087) - link
- Bugfix: It was not possible to change the date format displayed on the phone. (M5911) - link
- Improvement: Set the default timezone to BE-Brussels.
Aastra6755i v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Implements Aastra 6737i (M10280) - link
Aastra6755i v.1.10.0 (intermediate version) Show release notesHide release notes
- Feature: Configurable voicemail service extension. (M7747) - link
- Bugfix: Old configuration were not correclty deleted after an apply changes (M8764) - link
ReportCDR
- ReportCDR v.2.12.0 Show release notesHide release notes
- Feature: Show name instead of resource-id (M6965) - link
- Limitation: '|' operator only supported for Caller ID, Caller/Called Number, Caller/Called Device, Account and Site (M6597) - link
- Bugfix: SMP vulnerability fix (M3537) - link
- Feature: Added grand totals support (M6045) - link
ReportCDR v.2.11.1 (intermediate version) Show release notesHide release notes
- Bugfix: performance issue due to query for each result in summary report (TS-350)
Algo8180
SyncCDRDB
- SyncCDRDB v.1.19.0 Show release notesHide release notes
- Improvement: Show name instead of resource-id (M6965) - link
- Improvement: Replace extension by first name, last name (M7008) - link
- Improvement: Change the "Last Agent" column for CDR_Q reports (M7007) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Aastra6753i
Aastra6739i
Aastra6757i
SIP Trunk
SangomaPRI
FMU phone
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.0.5 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
| Action |
| Reboot SOP |
| Reinstall net.Dektop |
| Reboot all phones |
Changed components
Show changed componentsHide changed components
New module versions
- Call Management
- Call Management v.1.7.0 Show release notesHide release notes
- Feature: Enrich library to allow publishing IP and registration information after bulk admin of resources. (M0005818) - link
- Improvement: make phone registration more robust with a keep alive mechanism. (M0005863) - link
- Improvement: reduce time to boot call management (M0006057) - link
- Improvement: In some cases Call Management would not reconnect to Asterisk (M0006064) - link
- Improvement: Don't reload Communication Server on module installation (M0006240) - link
- Bugfix: Don't send all phone registration information in bulk when a sop requests it, but rely on the keep alive mechanism to synchronize them to reduce the load on large implementations (M0006098) - link
- Bugfix: Displayed wrong caller id when using communication server (M6477) - link
- Deprecated: Causes a deadlock after a couple of days (M7475) - link
- Call Management v.1.6.4 (intermediate version) Show release notesHide release notes
- Improvement: Backport - Added the possibility to add a phone in a queue in paused state (M3668) - link
- Bugfix: Backport - Don't refresh the Communication Server connection when reloading the configuration (M8157) - link
Call Management v.1.6.3 (intermediate version) Show release notesHide release notes
- Bugfix: Backport M6477 - The caller ID of a call coming from a queue was incorrect (M7538) - link
Unified Communication Model
- Unified Communication Model v.1.10.0 Show release notesHide release notes
- Feature: Publish IP and registration information after bulk admin of resources (M5818) - link
- Deprecated: Profile synchronization was not completely switched off (M18546) - link
Application Management Server
- Application Management Server v.3.3.5 Show release notesHide release notes
- Improvement: Add mshell sip.showstats tool (M6744) - link
- Improvement: Add buffering library (M5302) - link
- Improvement: Improve SIP logging (M6744) - link
- Bugfix: postsync task was generating an error on a standby sop in case of high availability (M6452) - link
- Bugfix: Added lock mechanism to mserver watchdog repair daemon (M3253) - link
Grandstream Phone Support
net.Buzz
System Base
PUM
Aastra Phone Support
- Aastra Phone Support v.2.1.1 Show release notesHide release notes
- Improvement: Allow to detect phone type by SIP useragent in Phone libraries. (M5417) - link
- Improvement: Remove old profile configuration files when logging out with PUM. (M5417) - link
- Bugfix: PUM shell tools sometimes failed when database inconsistencies occurred. (M5417) - link
net.Desktop
Watchdog
- Watchdog v.1.2.1 Show release notesHide release notes
- Bugfix: There were multiple concurrent repair processes when we detected one failure (M3253) - link
- Bugfix: watchdog processes could cause any out-of-memory on baseline 3
- Bugfix: Always create /var/run/watched directory when starting watchdog checks because this directory is deleted at reboot (M6905) - link
- Improvement: mserver sanity check is now launched by cron instead of being launched by watchdog(M6057) - link
Watchdog v.1.2.0 (intermediate version) Show release notesHide release notes
- Feature: Compatibility with Baseline 3
- Deprecated: Can cause an out-of-memory error on Baseline 3
Cisco ATA Support
SOP Base
- SOP Base v.1.5.4 Show release notesHide release notes
- Improvement: Increased the performance of the updatephone library.
- Improvement: Moved JVM installation to System Base module (M6738) - link
- Improvement: Updatephone.php was generating a lot of logs (M5980) - link
- Bugfix: Ensure clean logoff from Asterisk Manager
- Bugfix: Restart of snmpd on host was killing snmpd in every vSOP guest (M6506) - link
SOP Base v.1.5.3 (intermediate version) Show release notesHide release notes
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. Refactored code to avoid code duplication.
- Bugfix: PUM shell tools sometimes failed when database inconsistencies occurred. (M5417) - link
FAX Server
- FAX Server v.2.1.0 Show release notesHide release notes
- Bugfix: The process that converts the received fax to a pdf file sometimes crashed (M0006435) - link
- Feature: Checks if documents are valid when using email-to-fax. (M0006315) - link
- Feature: Support inline HTML images when using mail to fax (M0006661) - link
- Feature: FAX server notification mail attachment is now limited to the first page (M0006438) - link
- Feature: Failure notification is sent for incorrect/unknown fax extension for email-to-fax (M0006899) - link
- Limitation: in case of an upgrade, the module must be installed twice. (M00007213) - link
Mail Server
Mail Server v.1.3.1 (intermediate version) Show release notesHide release notes
- Improvement: Compatibility with baseline 3
- Bugfix: local mail files were never rotated properly
SOP API
SOP API v.4.1.8 (intermediate version) Show release notesHide release notes
- Bugfix: ccGetQueueMembers did not return the name and extension details of a member device that was only assigned as a secondary phone (M6067) - link
- Bugfix: phone parameter for ccGetQueueMembers was no longer taken into account since API 4.0.0 (M6643) - link
- Bugfix: async mode was not available in API 4 (M6650) - link
SOP API v.4.1.7 (intermediate version) Show release notesHide release notes
- Bugfix: some ccOriginate parameters were not parsed correctly (M6543) - link
Database Schema
Database Schema v.1.23.1 (intermediate version) Show release notesHide release notes
- Bugfix: default values were not set properly on existing records when adding new columns (M6646) - link
Communication Server
- Communication Server v.2.4.2 Show release notesHide release notes
- Bugfix: Fix potential deadlock on call transfer (M6636) - link
- Bugfix: Inband ringback tone not decoded by some end-point after a dynamic codec change (M7149) - link
Communication Server v.2.4.1 (intermediate version) Show release notesHide release notes
- Bugfix: Added missing G.729 SOP Shell plugin (M0006242) - link
Communication Server v.2.4.0 (intermediate version) Show release notesHide release notes
- Feature: Support of Direct RTP Setup. Backward compatible with SIP canreinvite parameter but set SIP Direct Media to 're-invite' in order to preserve the configuration (M6628) - link
- Feature: SIP trunk on other sockets than the default one (M6625) - link
- Feature: Call Admission Control check can be done in a callflow (M6726) - link
- Feature: Call Admission Control now support IAX as well (M6734) - link
- Improvement: Call Admission Control is a separate module (M6750) - link
- Improvement: Export media streams events through AMI (M6807) - link
- Improvement: Several SIP trunks on the same socket (M6694) - link
- Improvement: Support initiating transfers from the NAG to a CS2 PBX (M6636) - link
- Improvement: Add relax dtmf option (M6637) - link
- Bugfix: In case of successive REINVITE with codec change, the OK answer was not correct (M6640) - link
- Bugfix: The transcoding was not triggered in case of REINVITE with codec change to a codec not support by the remote peer (M6206) - link
- Deprecated: Potential deadlock on call transfer (M6636) - link
Communication Server v.2.3.8 (intermediate version) Show release notesHide release notes
- Bugfix: Locking problem in external notify (M7648) - link
Communication Server v.2.3.7 (intermediate version) Show release notesHide release notes
- Bugfix: Memory leak in external notify (M7648) - link
- Bugfix: Potential crash in external notify (M7479) - link
Communication Server v.2.3.6 (intermediate version) Show release notesHide release notes
- Bugfix: Fix potential deadlock on call transfer (M6636) - link
Communication Server v.2.3.5 (intermediate version) Show release notesHide release notes
- Bugfix: the call transfer via DTMF failed from time to time (M7065) - link
- Deprecated: Potential deadlock on call transfer introduced by M6636 (M6636) - link
Communication Server v.2.3.4 (intermediate version) Show release notesHide release notes
- Improvement: Clearer medialinks usage output (M6269) - link
- Bugfix: Some fax machines were unable to transmit/receive when the T.38 gateway was active due to and outdated dsp library (M6746) - link
- Bugfix: Intra-site calls were counted as inter-site calls when not using reinvite (M6268) - link
- Bugfix: SIP selftest was incrementing medialink usage (M6270) - link
- Bugfix: Parameter for the maximum call duration was not properly used (M6431) - link
- Bugfix: fixed codecs negociation issue for video calls (M6437) - link
- Bugfix: SIP Refer messages sent by NAG were not RFC3261 compliant (M6636) - link
- Deprecated: Potential deadlock on call transfer introduced by M6636 (M6636) - link
Polycom Phone Support
- Polycom Phone Support v.4.7.0 Show release notesHide release notes
- Bugfix: IP330 was showing Microbrowser after random time when using idle URL, IP330 firmware downgraded to version 3.3.1RevF (M6591) - link
- Improvement: Conditional Idle page was generating a lot of warning messages (M5980) - link
- Feature: Adding VVX 310 and VVX 400 firmwares and drivers (M7043) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M8671) - link
Polycom Phone Support v.4.6.0 (intermediate version) Show release notesHide release notes
- Feature: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. Added Firmware v3.3.5 for IP330. (M0006591) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating and polycom version 4 or more (M0006988) - link
- Bugfix: Fixed ringing in background while on call. (M0006591) - link
- Limitation: Polycom IP300, IP500, IP600 and IP4000 phone resources are not supported by this version due to lack of phone configuration cleaning support (M0008671) - link
Polycom Phone Support v.4.5.1 (intermediate version) Show release notesHide release notes
- Improvement: Allow to detect phone type by SIP useragent in Phone libraries. (M5417) - link
- Improvement: Remove old profile configuration files when logging out with PUM. (M5417) - link
- Bugfix: PUM shell tools sometimes failed when database inconsistencies occurred. (M5417) - link
Polycom Phone Support v.4.5.0 (intermediate version) Show release notesHide release notes
- Feature: Allow HTTP/HTTPS provisioning (M6263) - link
- Feature: Download custom ESCAUX CA through TFTP (M6308) - link
- Bugfix: high load on SOP due to idle page. call history now limited to 2 days.
- Bugfix: fix timezone issue for IP300, IP301, IP4000, IP500, IP501, IP600 and IP601
New resource versions
GrandstreamGXP2000
EyebeamAudio
Cisco7912
Queue
- Queue v.2.3.0 Show release notesHide release notes
- Bugfix: queues.ini was not always (re)generated correctly (M4142) - link
- Feature: New option "loose" for "Join when empty" and "Leave when empty" parameters
Queue v.2.2 (intermediate version) Show release notesHide release notes
- Feature: Active-active queue management (M0003601) - link
Queue v.2.1.1 (intermediate version) Show release notesHide release notes
- Bugfix: Allow analogue ZDA devices registered in the queue to be called. (M11037) - link
PolycomIP330
- PolycomIP330 v.4.19 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
net.Buzz
PolycomIP550
- PolycomIP550 v.4.19.0 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
PolycomIP670
- PolycomIP670 v.4.19 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
PolycomIP650
- PolycomIP650 v.4.19 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
PolycomIP560
- PolycomIP560 v.4.19.0 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
PolycomIP331
- PolycomIP331 v.4.19 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
PolycomIP450
- PolycomIP450 v.4.19 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
PolycomIP7000
- PolycomIP7000 v.4.19 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
PolycomVVX500
- PolycomVVX500 v.4.19.0 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to configure the RTP packet size, ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
PolycomIP6000
- PolycomIP6000 v.4.19 Show release notesHide release notes
- Feature: Added support for TLS/SRTP (M6153) - link
- Feature: Added the possibility to set the ptime (M6926) - link
- Feature: Enable cleaning of old phone configuration didn't work with templating (M6988) - link
SangomaPRI
Cisco SPA8000
- Cisco SPA8000 v.1.7.1 Show release notesHide release notes
- Bugfix: When you dialed internal numbers like 1000, the belgian dialplan was calling emergency numbers (M6693) - link
- Deprecated: In certain cases, using this resource can negatively impact the codec negotiation of SIP trunks or SIP devices (M9787) - link
PolycomVVX310
Cisco7941
New action versions
- STARTDYNAMICAPPLICATION.7.6
- STARTDYNAMICAPPLICATION.7.6 v.1.0 Show release notesHide release notes
- Bugfix: Two MaximumCallDuration parameters were configurable, but none of them were taken into account (M6431) - link
- Bugfix: The callflow number was sometimes not fetched correctly on the asterisk-1.2x module
Included components
Modules
Resources
Actions
Version 3.0.4 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
| Action |
| Reboot SOP |
| Reinstall net.Dektop |
| Reboot all phones |
Changed components
Show changed componentsHide changed components
New module versions
Database Schema
Database Schema v.1.22.3 (intermediate version) Show release notesHide release notes
- Bugfix: For debugging (M5988) - link
- Deprecated: Was created only for debugging purpose (M5988) - link
High Availability
PUM
- PUM v.3.2.5 Show release notesHide release notes
- Bugfix: Logout was not working in active-active setup with Polycom reload (M6102) - link
- Bugfix: PUM shell tools were not working on a HA standby sop in a cluster (M6278) - link
Cluster & SOP Active-Active Support
- Cluster & SOP Active-Active Support v.1.5.0 Show release notesHide release notes
- Improvement: Voicemail prompts are now synchronized (M4142) - link
- Limitation: active-active queue management not supported on Communication Server (M6696) - link
Network
FAX Server
Web Server
- Web Server v.1.1.2 Show release notesHide release notes
- Bugfix: SSL certificate generation could fail on Active-Standy setups(M0006311) - link
- Improvement: Disable Apache2 KeepAlive by default (M0006060) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
net.Desktop
- net.Desktop v.2.27.2 Show release notesHide release notes
- Improvement: keep only one lock file mechanism in the net.Desktop lucene implementation (M6267) - link
- Bugfix: Changing your status makes multiple requests to dbSetProfile (M6393) - link
- Bugfix: Fix ConcurrentModificationException on shutdown (M6317) - link
- Bugfix: X500 seems to be able to chat with X300 but create exception (M6383) - link
- Bugfix: a X500 has the possibility to click on the chat button of a X300 contact (M6325) - link
- Bugfix: When shutting down windows, the process was sometimes blocked by net.Desktop (M6069) - link
- Limitation: Asterisk-1.2 module is currently not supported
Communication Server
- Communication Server v.2.3.3 Show release notesHide release notes
- Improvement: Added the possibility to enable TLS (M6261) - link
- Improvement: Added the possiblity to send notify message to Aastra phones (M6087) - link
- Improvement: Productize the extern notify script (M6345) - link
- Improvement: The preferred codec is now the only codec proposed in the 200 OK and in the RE-INVITE (M6251) - link
- Improvement: All compatible codecs are now offered in the outgoing re-invite in order not to be too restrictive on a SIP trunk (M6251) - link
- Improvement: If a re-invite is rejected with a 488 Not Acceptable, a fallback to bridge in asterisk is done automatically (M6251) - link
- Bugfix: No connected line update for the initial caller after API transfer (M6307) - link
- Bugfix: Native channel codec was changed even if reinvite was disabled (M6251) - link
- Bugfix: There was a segmentation fault when using asterisk command line after upgrading if restart was not done (M6430) - link
- Bugfix: Music on hold with mp3 files was not working when mode "Play the music from the beginning" was selected in the music on hold resource (M6507) - link
Aastra Phone Support
VMXML
SOP Base
Localization
- Localization v.1.1.2 Show release notesHide release notes
- Bugfix: Make the localization taken into account by the whole system (M6475) - link
- Deprecated: Perl warning was generated on apply-change (TS-1238)
Sangoma Card Support
SOP API
SOP API v.4.1.5 (intermediate version) Show release notesHide release notes
- Improvement: Improve parameters' validation when invoked loopback address(M0)
- Improvement: Ported changes of ccConsultationCall from API2 (M6418) - link
- Bugfix: Incorrect caller id and colp when called is transferred (M6474) - link
- Bugfix: GetXPath action was not working when no SetVar action was used in any callflow (M6426) - link
- Bugfix: dbGetSMPUserUrl was not returning the correct url (M6478) - link
- Bugfix: net.Desktop was showing the number of the last extension the call was sent through instead of the dialled number (M6346) - link
SOP API v.4.1.4 (intermediate version) Show release notesHide release notes
- Improvement: API dbgetcallhistory for an extension without phone configured (M6378) - link
- Improvement: Port ccConsulationCall development from API2 to API4 (M6418) - link
- Bugfix: calledid not updated when going through startdynamicapplication (M6330) - link
New resource versions
Aastra6755i
Aastra6731i
- Aastra6731i v.1.8.0 Show release notesHide release notes
- Bugfix: phone was exiting corporate directory when using the corporate directory and the Idle URL together. (M6087) - link
- Bugfix: It was not possible to change the date format displayed on the phone. (M5911) - link
- Improvement: Set the default timezone to BE-Brussels.
Aastra6731i v.1.11.0 (intermediate version) Show release notesHide release notes
- Feature: Implements Aastra 6737i
Aastra6731i v.1.10.0 (intermediate version) Show release notesHide release notes
- Feature: Configurable voicemail service extension. (M7747) - link
- Bugfix: Old configuration were not correclty deleted after an apply changes (M8764) - link
Aastra Virtual Phone
- Aastra Virtual Phone v.1.6.0 Show release notesHide release notes
- Bugfix: phone was exiting corporate directory when using the corporate directory and the Idle URL together. (M6087) - link
- Bugfix: It was not possible to change the date format displayed on the phone. (M5911) - link
- Bugfix: Choosing default behaviour for the programmable keys caused no action being set at all. (M5747) - link
- Improvement: Set the default timezone to BE-Brussels.
FMU phone
SyncCDRDB
- SyncCDRDB v.1.18.1 Show release notesHide release notes
- Bugfix: Some garbage calls where shown in the advanced report (M6552) - link
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Aastra 622d
New action versions
Included components
Modules
Resources
Actions
Version 3.0.3 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Web Server
- Web Server v.1.1.1 Show release notesHide release notes
- Bugfix: Keepalive timeout setting was not taken into account
- Bugfix: Incorrect version of the package was installed on version 1.1.0
- Improvement: Moved web server related packages to the Web Server module (M6026) - link
- Improvement: Compatibility with Baseline 3 (M6026) - link
- Feature: Add TLS support for Communication Server (M6261) - link
- Bugfix: SSL certificate generation could fail on Active-Standy setups(M0006311) - link
- Deprecated: Vulnerable to CVE-2011-319 (M17647) - link
net.Desktop
- net.Desktop v.2.27.1 Show release notesHide release notes
- Improvement: Added a SMS icon in the Contact window to access the SMS tab when the contact is not online in net.Desktop (M6162) - link
- Improvement: When a user tries to chat with a user who does not have the permission to chat, the message in the chat window was not clear enough (M6159) - link
- Improvement: remove the minutely redraw of the icon in the icon tray (M6244) - link
- Improvement: There was too much DEBUG and TRACE messages in the logs(M6290) - link
- Bugfix: net.Desktop reconnection fails (M6213) - link
- Bugfix: Caller id not shown in contact information while the phone is ringing (M6266) - link
- Bugfix: Call History become blank when you make a sync (M6109) - link
- Bugfix: When dialing up from net.Desktop, the created channel is not always detected (M6216) - link
- Bugfix: 3 translation issues with "Number to Call"/lang selection/minimalize in net.Desktop (M6121) - link
- Bugfix: transfer call from net.Desktop give an error (M6124) - link
- Bugfix: net.Desktop cannot establish its connections if it has been started without network connectivity (M6111) - link
- Bugfix: When receiving an SMS it was not possible to open it in a Contact window (M6038) - link
- Bugfix: User could not send an SMS to a contact if the contact was not online in net.Desktop (M6037) - link
- Bugfix: It was not possible to search a string containing special characters such as '@' (M5735) - link
- Bugfix: There was an encoding problem in the languages dropdown (M6285) - link
- Bugfix: After running several days, there was net.Desktop rendering issue and the Icon tray could disappear (M5856) - link
- Bugfix: net.Desktop could sometimes taken unexpected focus on the Communication Window (M6305) - link
- Limitation: Asterisk-1.2 module is currently not supported
SOP API
- SOP API v.4.1.3 Show release notesHide release notes
- Bugfix: Fixed net.Desktop pickup on Communication Server 2. (M6112) - link
- Bugfix: When CallDevices fails to call a phone, a pickup is shown instead of a missed (M6292) - link
- Bugfix: Call going through successive extension are not shown in the call history (M6295) - link
Sangoma Card Support
Unified Communication Model
- Unified Communication Model v.1.9.6 Show release notesHide release notes
- Bugfix: Authentication issue when using specific passwords (M6201) - link
- Bugfix: WebAPI would not initialize properly if contact name is empty (M5566) - link
- Deprecated: Profile synchronization was not completely switched off (M18546) - link
Communication Server
- Communication Server v.2.3.2 Show release notesHide release notes
- Improvement: G729 requirements are now prepackaged in the module (M6241) - link
- Bugfix: The Call Admission Control option was not taken into account (M6252) - link
- Bugfix: G729 shell plugin was not working (M6242) - link
- Bugfix: The call could be cut after a API call to redirect both channel in a bridge (M6175) - link
- Bugfix: Apply callflow changes was not working (M6110) - link
LDAP Synchronization
- LDAP Synchronization v.1.9.4 Show release notesHide release notes
- Bugfix: in some cases non-ascii characters become ? in smp
- Limitation: The fax number and the home number are inverted
LDAP Synchronization v.1.9.3 (intermediate version) Show release notesHide release notes
- Bugfix: sync user attributes
- Limitation: The fax number and the home number are inverted
New resource versions
Aastra 610d
SNOMM9
- SNOMM9 v.1.2 Show release notesHide release notes
- Bugfix: DTMF mode RFC2833 not working when reinvite is used (M4688) - link
- Limitation: A turned-off M9 in a queue can lead to unexpected call handling (M0)
ListPackages
PolycomIP7000
- PolycomIP7000 v.4.18 Show release notesHide release notes
- Feature: Added support for Connected Line Update (M5654) - link
- Improvement: Add headset configuration in resource parameters for Polycom IP 650 (M4533) - link
- Improvement: Add possibility to choose the language set for the user in the SMP (M4955) - link
- Improvement: Apply all changes of SVE2 resource in SDP resource (M2963) - link
- Bugfix: Changing Date Format had no effect when language was set to Default (M5528) - link
- Bugfix: First speedial defined was not displayed on the phone (M5201) - link
- Bugfix: setting directory to local still generates directory (M0005979) - link
- Bugfix: generating directory doesn't work on cluster (M0005979) - link
PolycomVVX500
- PolycomVVX500 v.4.18 Show release notesHide release notes
- Feature: Added support for Connected Line Update (M5654) - link
- Improvement: Add headset configuration in resource parameters for Polycom IP 650 (M4533) - link
- Improvement: Add possibility to choose the language set for the user in the SMP (M4955) - link
- Improvement: Apply all changes of SVE2 resource in SDP resource (M2963) - link
- Bugfix: Changing Date Format had no effect when language was set to Default (M5528) - link
- Bugfix: First speedial defined was not displayed on the phone (M5201) - link
- Bugfix: Setting directory to local still generates directory (M0005979) - link
- Bugfix: Generating directory doesn't work on cluster (M0005979) - link
PolycomIP450
- PolycomIP450 v.4.18 Show release notesHide release notes
- Feature: Added support for Connected Line Update (M5654) - link
- Improvement: Add headset configuration in resource parameters for Polycom IP 650 (M4533) - link
- Improvement: Add possibility to choose the language set for the user in the SMP (M4955) - link
- Improvement: Apply all changes of SVE2 resource in SDP resource (M2963) - link
- Bugfix: Changing Date Format had no effect when language was set to Default (M5528) - link
- Bugfix: First speedial defined was not displayed on the phone (M5201) - link
- Bugfix: Setting directory to local still generates directory (M0005979) - link
- Bugfix: Generating directory doesn't work on cluster (M0005979) - link
SangomaPRI
SyncCDRDB
- SyncCDRDB v.1.18.0 Show release notesHide release notes
- Bugfix: No CDR generated when called contains * or # characters
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncCDRDB v.1.17.1 (intermediate version) Show release notesHide release notes
- Improvement: don't sync phone registration events to save disk space and increase speed (M0)
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
SyncFDR
ReportFax
Aastra 612d
New action versions
STARTDYNAMICAPPLICATION.7.5
- STARTDYNAMICAPPLICATION.7.5 v.1.0 Show release notesHide release notes
- Improvement: Profile parameters are no longer queried from the database on a gateway SOP
- Bugfix: Callflow was executed on the gateway SOP when both SOP1 and SOP2 of an extension were unreachable (M6239) - link
- Bugfix: Userfield in the CDR were truncated after cascading ForkCDR (M6298) - link
Included components
Modules
Resources
Actions
Version 3.0.2 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- LDAP Synchronization
- LDAP Synchronization v.1.9.2 Show release notesHide release notes
- Improvement: Added Fax and Home number field to LDAP Synchronization (M0004802) - link
- Limitation: The fax number and the home number are inverted
System Base
- System Base v.1.0.0 Show release notesHide release notes
- Feature: Initial release. (M6026) - link
- Improvement: Moved non-telephony related packages from SOP base to System base. (M6026) - link
- Deprecated: Adds an obsolete public key to the SOP (M16229) - link
Network
Communication Server
- Communication Server v.2.3.1 Show release notesHide release notes
- Bugfix: Fixed potential crash when accepting a call from a queue (M6234) - link
- Limitation: "Enable Call Admission Control" option doesn't work (M6252) - link
DHCP Server
SOP Base
- SOP Base v.1.5.1 Show release notesHide release notes
- Feature: Translate status that is shown on the phone (M6198) - link
- Improvement: Queue status should not be shown on the screen if profile parameter containing the queue name is empty (M6236) - link
SOP Base v.1.5.0 (intermediate version) Show release notesHide release notes
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. moved non-telephony related libraries to System Base module (M6026) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. moved web server related packages to Web Server module (M6026) - link
- Improvement: Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations. remove unnecessary and legacy packages (M6026) - link
Call Management
New resource versions
PolycomIP6000
- PolycomIP6000 v.4.18 Show release notesHide release notes
- Feature: Added support for Connected Line Update (M5654) - link
- Improvement: Add headset configuration in resource parameters for Polycom IP 650 (M4533) - link
- Improvement: Add possibility to choose the language set for the user in the SMP (M4955) - link
- Improvement: Apply all changes of SVE2 resource in SDP resource (M2963) - link
- Bugfix: Changing Date Format had no effect when language was set to Default (M5528) - link
- Bugfix: First speedial defined was not displayed on the phone (M5201) - link
- Bugfix: setting directory to local still generates directory (M0005979) - link
- Bugfix: generating directory doesn't work on cluster (M0005979) - link
SyncCDRDB
- SyncCDRDB v.1.17.0 Show release notesHide release notes
- Bugfix: very slow to sync queue data
- Deprecated: Old queue reporting is no more working with new Communication Server (TS-833)
Cisco SPA8000
- Cisco SPA8000 v.1.7.0 Show release notesHide release notes
- Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: The default dialplan has changed from a US numbering plan to a Belgian numbering plan. Upgrading to this version should be tested before applying it on all devices.
- Feature: Configurable dialplan to allow faster dialing after the number has been completed (M6063) - link
- Deprecated: In certain cases, using this resource can negatively impact the codec negotiation of SIP trunks or SIP devices (M9787) - link
Cisco SPA3102
- Cisco SPA3102 v.1.4.0 Show release notesHide release notes
- Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: The default dialplan has changed from a US numbering plan to a Belgian numbering plan. Upgrading to this version should be tested before applying it on all devices.
- Feature: Configurable dialplan to allow faster dialing after the number has been completed (M6063) - link
New action versions
Included components
Modules
Resources
Actions
Version 3.0.1 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
Changed components
Show changed componentsHide changed components
New module versions
- Shell
- Shell v.1.14.5 Show release notesHide release notes
- Improvement: Compatibility with the Communication Server module
- Feature: Added a user recovery in order to change the admin password when this one is forgotten (M2009) - link
- Feature: Added possibility to restart ssh (M2959) - link
- Bugfix: It was impossible to take a network trace on baseline 2 (M5625) - link
- Deprecated: This version does not properly limit SCP access (M11014) - link
FAX Server
Sangoma Card Support
New resource versions
SIP Trunk
Cisco SPA2102
- Cisco SPA2102 v.1.14.0 Show release notesHide release notes
- Potential update impact level 2 : in the event this update contains a bug, it might have critical impact. Respect dependencies and retest your most important callflows and applicative integrations.: The default dialplan has changed from a US numbering plan to a Belgian numbering plan. Upgrading to this version should be tested before applying it on all devices.
- Feature: Configurable dialplan to allow faster dialing after the number has been completed (M6063) - link
- Deprecated: Affects codec settings on other SOP of a cluster (M12881) - link
New action versions
No new action versions.
Included components
Modules
Resources
Actions
Version 3.0.0 - Deprecated Restricted release!
Release notes
- Deprecated: superseded by a newer release
Special manual upgrade actions
| Action |
| Reboot SOP |
| Reinstall net.Dektop |
| Reinstall net.Console |
| Reboot all phones |
Changed components
Show changed componentsHide changed components
New module versions
No new module versions.
New resource versions
No new resource versions.
New action versions
No new action versions.
Included components
Modules
Resources
Actions
